Corrigendum - Special Repairs To Building No . Khy-101 06 X Or Md Accn Of 22 Rajput At Jutogh Under Ge Jutogh
Tender Value
27.60 Lakhs
Estimated cost
Bid Submission
10 Jan 2020
0 days left
EMD
55200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jutogh → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Corrigendum - Special Repairs To Building No . Khy-101 06 X Or Md Accn Of 22 Rajput At Jutogh Under Ge Jutogh
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-Jan-2020 | Date corrigendum | Date | 10-Jan-2020 |
BOQ
| Name of Work: SPECIAL REPAIRS TO BUILDING NO. KHY-101 (06 X OR MD ACCN) OF 22 RAJPUT AT JUTOGH UNDER GE JUTOGH | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling of floor hearth or wall tiling including cement mortar bedding and removing the rubbish off the premises,complete all as specified. | 185 | Sqm | |
| 2 | 2 | 25mm thick cement concrete 1:2:4 type B-0, (using 12.5mm graded stone aggregate) as in base coarse for floors complete all as specified. | 70 | Sqm | |
| 3 | 3 | Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified. | 70 | Sqm | |
| 4 | 4 | Glazed ceramic coloured tiles 350x250x7mm/ 450 mm x 300 mm x 6 to 7 mm thick,as in skirting, dado, riser to steps, etc set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles laif over and including 10 mm thick rendering in CM (1:3) complete all as specified. | 90 | Sqm | |
| 5 | 5 | Cleaning of roof slab including picking, sweeping, cleaning and washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed as under:\n(a) Applying cement slurry on existing roof surfaces @ 1.00 Kg/Sqm, cement plastering 15mm thick in CM (1:4) on roof surfaces mixed with water proofing compound @ 3% by weight of cement, finish the surfaces fair & even without using extra cement (Supply only approved WPC shall be measured and paid separeatly). \n(b) Preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @ 0.30 Ltr/Sqm\n(c) Aplying Bitumen @ 1.20 Kg/Sqm of grade 85/25\n(d) Providing polymeric water proofing membreane Super thermolay of STP 3mm thick of weught not less than 3.00 Kg/Sqm reinforced with polyster non woven fabric (Wt not less than 150 gm/Sqm) centre core including coating the surface with compatible primer and torch application of membrane with 10 cm overlaps as required thereof complete all as specified and directed.\n (e) Applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/Sqm \n NOTE:- The work of water proofing treatment shall be got carried out through expert team of manufacturers or authorised applicator of manufacturer. | 12 | Sqm | |
| 6 | 6 | 40mm thick brick tiles laid over and including 15 mm thick cement mortar 1:6 and joints grouted flush in cement mortar (1:3) and mixed with 5% of crude oil by weight of cement complete all as specified and directed.\n | 12 | Sqm | |
| 7 | 7 | Supply only integral water proofing compound complete all as specified. | 51 | Kg | |
| 8 | 8 | Demolition of cement concrete above ground floors & pavings exc 15 cm thickness (Sunken portion) complete all as specified. | 4 | Cum | |
| 9 | 9 | Screed bed 15mm thick in CM 1:3 with WPC (in sunken slab) complete all as specified. Note : Supply only water proofing compound shall be measured and paid for separately under relevant item. | 25 | Sqm | |
| 10 | 10 | Preparation of plaster surfaces /RCC roof surfaces and applying one coat of bituminous primer @0.30 Ltr/sqm complete all as specified. | 25 | Sqm | |
| 11 | 11 | Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces etc in sunken portion complete all as specified. | 25 | Sqm | |
| 12 | 12 | Cement concrete type 1:5:10 type E2, (using 40mm graded stone aggregate) as in filling and mass aggregate complete all as specified. | 4 | Cum | |
| 13 | 13 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.complete all as specified. | 220 | Sqm | |
| 14 | 14 | Brushing neat cement slurry with 3.0 Kg of cement per square metre complete all as specified. | 220 | Sqm | |
| 15 | 15 | Non skid ceramic coloured tiles joint free 7-8mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed with cement mortar 1:4 all as specified. | 220 | Sqm | |
| 16 | 16 | Non skid ceramic coloured tiles joint free 7-8mm thick ,area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm , in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in CM (1:3) complete all as specified. | 25 | Sqm | |
| 17 | 17 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description including racking out joints hacking for key,scrubbing down with water etc.,complete all as specified. | 270 | Sqm | |
| 18 | 18 | Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified | 11 | Cum | |
| 19 | 19 | Brick work with sub class ‘B’ old size bricks, straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6, complete all as specified. | 10 | Cum | |
| 20 | 20 | Brick work with sub class‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified. | 10 | Sqm | |
| 21 | 21 | Rendering 10 mm thick on fair surfaces of brickwork or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. | 100 | Sqm | |
| 22 | 22 | Rendering 15 mm thick on other than fair surfaces of brickwork or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement with WPC complete all as specified. (Note : Supply only approved WPC shalll be measured and paid separately under relevanr item). | 170 | Sqm | |
| 23 | 23 | Preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified. | 100 | Sqm | |
| 24 | 24 | Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified. | 170 | Sqm | |
| 25 | 25 | Complete removal of existant treatment and applying two coatsof oil emulsion distemper over a coat of alkali resistant primer complete all as specified. | 800 | Sqm | |
| 26 | 26 | Complete removal of existant treatment of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified. | 350 | Sqm | |
| 27 | 27 | Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified. | 180 | Sqm | |
| 28 | 28 | Demolition of reinforced cement concrete as in cooking platform,lintels, chajja etc of any description and in any position not other wise specifically provided for complete all as specified. | 1.5 | Cu.m | |
| 29 | 29 | RCC 1:2:4 Type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. | 1.5 | Cum | |
| 30 | 30 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified. | 15 | Sqm | |
| 31 | 31 | Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required,including cranking, bending spirally for hooping for coulmns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc,complete all as specified. | 70 | Kg | |
| 32 | 32 | Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified. | 80 | Kg | |
| 33 | 33 | Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20mm thick screed bed in CM 1:4 complete all as specified. | 16 | Sqm | |
| 34 | 34 | Rounding to edges of stone slabs one edge, such as in , cooking platform, and other similar situations all as specified. | 35 | RM | |
| 35 | 35 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets complete all as specified. | 90 | Sqm | |
| 36 | 36 | 4mm thick non asbestos fibre cement building boards (E board designer) fixed or laid /inserted to timber/GI/Aluminium frame work with screws in ceiling flat or sloping complete all as specified. | 90 | Sqm | |
| 37 | 37 | GI frame work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified. | 90 | Sqm | |
| 38 | 38 | Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified | 90 | Sqm | |
| 39 | 39 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified. | 142 | Sqm | |
| 40 | 40 | Pre-painted galvalume aluminium zinc coating GI based profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified | 90 | Sqm | |
| 41 | 41 | All as per above item No.40 above but except sheets. Note : Sheets obtained from dismantling shall be used). | 40 | Sqm | |
| 42 | 42 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified | 12 | Sqm | |
| 43 | 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for truss / purlin / rafter complete all as specified. | 3 | Qtl | |
| 44 | 44 | Roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.,Fe-410-W(Gde-E-250) quality-B complete all as specified. | 300 | Kg | |
| 45 | 45 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wall/concrete surfaces complete all as specified. | 40 | RM | |
| 46 | 46 | Dismantling water tanks of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified.. | 6 | Each | |
| 47 | 47 | Rotational moulded polyethylene water storage tanks (cylindrical vertical type with closed top) of 1000 litres capacity, ISI marked, double layered, marked embosed, hoisted and fixed in position including connecting up pipes fixed in repair complete all as specified. | 6 | Each | |
| 48 | 48 | 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified. | 6 | Each | |
| 49 | 49 | 1 mm thick Galvanised mild steel sheet 550 mm dia fixed with and including 04 Nos bolts of 5-6mm dia with 8 Nos nut bolt as in cover to water storage tank complete all as specified. | 6 | Each | |
| 50 | 50 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified. | 80 | RM | |
| 51 | 51 | Refixing 15mm bore old steel water tubing and connections with new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified. | 10 | RM | |
| 52 | 52 | 15 mm bore galvanised iron tubing medium grade IS marked with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to wall and ceilings or laid in floors complete all as specified. | 70 | Rm | |
| 53 | 53 | Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified. | 50 | RM | |
| 54 | 54 | Refixing 20mm bore old steel water tubing and connections with new fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified. | 10 | Rm | |
| 55 | 55 | 20 mm bore galvanised iron medium grade with all fittings such as bends, elbows, tees, short pieces, connections, backnuts, diminishing pieces, caps, plugs and unions etc and fixing with wall hooks, wooden plugs etc and cutting, screwing and waste including cutting through walls, floors etc and making good the disturbed surfaces complete to walls and ceilings or laid in floors complete all as specified. | 40 | RM | |
| 56 | 56 | 20 mm dia stop valves cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed in repair complete all as specified. | 12 | Each | |
| 57 | 57 | 15 mm dia bib taps cast copper alloy chromium plated fancy type, screwed for iron pipe or brass ferrule, fixed in repair complete all as specified. | 42 | Each | |
| 58 | 58 | 15 mm dia angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, fixed in repair complete all as specified. | 18 | Each | |
| 59 | 59 | 15 mm dia concealed stop cock, cast copper alloy, fancy type chromium plated screwed down high pressure,fixed in repair complete all as specified. | 6 | Each | |
| 60 | 60 | Brass chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified. | 6 | Each | |
| 61 | 61 | PVC connection 15 mm size 600 mm long with PTMT nuts fixed in repair complete all as specified. | 18 | Each | |
| 62 | 62 | Brass chromium plated tubular towel rail ‘D’ type 600 mm long between flange,fixed in repair complete all as specified. | 6 | Each | |
| 63 | 63 | Viteous China squatting pan, Orrissa, pattern, size 580 x 440 mm white with integral foot rest fixed in repair complete all as specified. | 6 | Each | |
| 64 | 64 | PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets fixed in repair complete all as specified. | 6 | Each | |
| 65 | 65 | 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repair complete all as specified. | 6 | Each | |
| 66 | 66 | Plastic bath cabinet with mirror of size 446x553x125 mm fixed in repair complete all as specified. Make : Nilkamal Gem plastic cabinet, style : Modern or its equivalent in the makes mentioned. | 6 | Each | |
| 67 | 67 | Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified.. | 6 | Each | |
| 68 | 68 | Sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste couplings waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm fixed in repair complete all as specified. | 6 | Each | |
| 69 | 69 | Stainless steel plate rack of size 24x30x10 inches for kitchen made of 1mm thick sheet SS 304 grade with suitable hanging arrangement and fixed to wall fixed in repair complete all as specified. Note :-Weight of rack shall not less than 6 Kg each | 6 | Each | |
| 70 | 70 | Taking down Shutters of any description exc 1 sqm and n.exc 2 sqm each and removing to store,complete all as specified. | 20 | Per leaf | |
| 71 | 71 | Taking down chowkats or frame with shutter, n exc. 1.50 sqm each (without taking off shutters from the frame) ,including making good disturbed surface complete all as specified. | 50 | Each | |
| 72 | 72 | Taking down chowkats or frame with shutter, exc. 1.50 sqm each (without taking off shutters from the frame), including making good disturbed surface complete all as specified. | 6 | Each | |
| 73 | 73 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening after repairs complete all as specified.. | 8 | Each | |
| 74 | 74 | Pressed steel frames 1.25mm thick, 165 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including filling with cement concrete 1:2:4 type B1 complete as specified, supplied and fixed complete all as specified. | 29 | RM | |
| 75 | 75 | Pressed steel frames 1.25 mm thick,105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including filling with cement concrete 1:2:4 type B1 complete as specified, supplied and fixed complete all as specified. | 48 | RM | |
| 76 | 76 | Framed work/chowkats as in doors or gates of angle or other section with gusset plates , rails , braces etc complete drilled for fixing of steel sheeting etc complete all as specified. | 294 | Kg | |
| 77 | 77 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified. | 600 | Kg | |
| 78 | 78 | 35 mm thick 2nd class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass gauze etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Pt I Section 8, clause 8.2 (a) complete all as specified. | 11 | Sqm | |
| 79 | 79 | 35mm thick second class hard wood factory made plain framed, panelled shutters (any numbers of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified. | 25 | Sqm | |
| 80 | 80 | Prelaminated particle board 18/19 mm thick exterior grade with decorative face veneer on one face and balancing white lamination on other side fixed with nails/ screws in cup board shutter/ pelmets etc. or to timber frame work, fixed in repairs including 6mm thick teak wood lipping complete all as specified.. | 24 | Sqm | |
| 81 | 81 | Continuous piano hinges mild steel bright finish or electro galvanized with open flap width 30 mm, fixed in repairs complete all as specified.. | 48 | Rm | |
| 82 | 82 | Hasp and staple, safety type,of aluminium anodised including bolt to hinge plate and fixed with screws 100 mm size, complete all as specified. | 12 | Each | |
| 83 | 83 | 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished,complete all as specified. | 24 | Each | |
| 84 | 84 | Factory made Solid PVC moulded door shutters 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm prelam PVC Sheet on back face supplying & fixing in frame at site as per specification & drawing (with wood particle board core) complete all as specified. | 17 | Sqm | |
| 85 | 85 | Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC Sheet & edges painted to match with printed sheet reinforced with MS square tube complete all as specified. | 57 | RM | |
| 86 | 86 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified. | 42 | Sqm | |
| 87 | 87 | Steel ventilators, with top hung shutter including hinges steel peg stay, complete all as specified. | 6 | Sqm | |
| 88 | 88 | Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacks or galvanised wire staples complete all as specified. | 32 | Sqm | |
| 89 | 89 | Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm fitted with tinned tacks or galvanised wire staples fixed in repair complete all as specified. | 21 | Sqm | |
| 90 | 90 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified. | 15 | Sqm | |
| 91 | 91 | Sheet glass 3 mm thick, ordinary quality glazing with oil putty in squares n exc 0.50 sqm each pane complete all as specified. | 36 | Sqm | |
| 92 | 92 | Figured glass 3 mm thick, pin head type, and glazing with oil putty in squares n exc 0.50 sqm each pane complete all as specified. | 5.8 | Sqm | |
| 93 | 93 | Preparing new wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. | 152 | Sqm | |
| 94 | 94 | Preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. | 50 | Sqm | |
| 95 | 95 | Preparing new steel surfces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. | 98 | Sqm | |
| 96 | 96 | Preparing old painted steel surfces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. | 40 | Sqm | |
| 97 | 97 | PVC coated mild steel 25mm dia drapery rods for curtains including decorative end knobs and brackets (wall to wall or flush to wall) fixed in repair complete all as specified. | 110 | RM | |
| 98 | 98 | Mild steel sliding door bolts 250 mm long plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified. | 24 | Each | |
| 99 | 99 | 300 mm long mild steel ordinary rat rail pattern springs including roller and roller plate fixed in repairs complete all as specified. | 6 | Each | |
| 100 | 100 | Aluminium extruded alloy handles fabricated type anodised 150mm long complete all as specified. | 48 | Each | |
| 101 | 101 | Cold rolled mild steel medium weught butt hinges 100mm size complete all as specified. | 108 | Each | |
| 102 | 102 | Cold rolled mild steel medium weught butt hinges 50 mm size complete all as specified. | 30 | Each | |
| 103 | 103 | Aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified. | 48 | Each | |
| 104 | 104 | Second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified. | 30 | Each | |
| 105 | 105 | Dismantling of cast iron or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches/floor/wall ,if required , of 100mm dia complete all as specified. | 49 | RM | |
| 106 | 106 | 100 mm dia (sand cast) Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors,complete all as specified. | 7 | RM | |
| 107 | 107 | 100mm bore sand cast pipe cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fixed to wall, complete all as specified | 42 | RM | |
| 108 | 108 | Bends (any radius) with duck's foot or heel rest ( large bore measured) 100 mm dia fixed in repair complete all as specified. | 6 | Each | |
| 109 | 109 | Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches 100 mm bore with oval accessed door fixed in repair complete all as specified. | 6 | Each | |
| 110 | 110 | 100 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified. | 4 | Each | |
| 111 | 111 | Slotted cast iron vent cowls of 100 mm dia fixed in repair complete all as specified. | 2 | Each | |
| 112 | 112 | Stack clamp out of 50x5 mm flat iron and 16mm dia round iron stays,including bolts and nuts and securing ends of stays to wall or roof 100mm bore of pipe fixed in repair complete all as specified. | 16 | Each | |
| 113 | 113 | Cast iron floor trap with SS grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1, 100 mm dia fixed in repair complete all as specified. | 12 | Each | |
| 114 | 114 | Cement concrete 1:2:4 type B1, (using 20 mm graded stone aggregate) in surface channels and drains etc including finishing the surface even and smooth complete all as specified. | 5 | Cum | |
| 115 | 115 | Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for including making good the disturbed portion/surface complete all as specified. . | 189 | Per point | |
| 116 | 116 | Point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 1.5 sqmm drawn through and including PVC concealed conduit with fixing accessories, with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular with all fittings (ISI Marked) including continuous earth wire of PVC insulated FRLS unsheathed multi stranded copper conductor cable size 1.5 sqmm for earth wire conncected to common earth dolly for one light/fan/bell point controlled by one switch complete all as specified. | 114 | Per point | |
| 117 | 117 | All as per item No 116 above but light/fan/bell point controlled by 2 two way switches. | 3 | Per point | |
| 118 | 118 | All as per item No 116 above but for one 3/5 pin socket 5 Amp on independent board. . | 24 | Per point | |
| 119 | 119 | All as per item No 116 above but for one 3/5 pin socket 5 Amp on same board. | 24 | Per point | |
| 120 | 120 | Point wiring with colour coding multistranded copper conductor cable, PVC insulated (FRLS) and unsheathed size 4 sqmm drawn through and including PVC concealed conduit with fixing accessories, with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet/modular with all fittings (ISI Marked) including continuous earth wire of PVC insulated FRLS unsheathed multi stranded copper conductor cable size 4 sqmm for earth wire conncected to common earth dolly for one 3 pin 15 Amps socket outlet independent complete all as specified. | 24 | Per point | |
| 121 | 121 | Switch piano flush type/Bell push/, 5 Amps, single pole one way complete all as specified. | 156 | Each | |
| 122 | 122 | Switch piano flush type, 5 Amps, single pole two way complete all as specified. | 6 | Each | |
| 123 | 123 | Socket 5 pin, 6 Amp, flush type piano multi purpose complete all as specified. | 48 | Each | |
| 124 | 124 | Socket 15 Amps flush type, 6 Pin, 230 Volts , AC complete all as specified. | 24 | Each | |
| 125 | 125 | Switch 15 Amps flush type 230 Volts , AC complete complete all as specified. | 24 | Each | |
| 126 | 126 | Ceiling rose, surface bakelite, 65x50mm, three terminals complete all as specified. | 75 | Each | |
| 127 | 127 | Angle lamp holder PVC/Polycarbonate base / back suitable for LED lamp complete all as specified. | 36 | Each | |
| 128 | 128 | LED Bulbs 9W B-22 Pin type complete all as specified. | 36 | Each | |
| 129 | 129 | Ding Door Bell, 230 volts, single pole complete all as specified. | 6 | Each | |
| 130 | 130 | LED tube light along with fixture, 20W (4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffused, fixed in repair complete all as specified. Make : Havells Cat No ENDURALINEARNEOBS20WLED840SPCWH or its equivalent in the makes mentioned in Appendix 'B'. | 51 | Each | |
| 131 | 131 | LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded almunium heat sink, environmental friendly, energy efficient, ready to use pack, fixed in repair complete all as specified. Make :-Havells cat No ENDURALINEARNEOBS10WLED865SPCWH or its equivalent in the makes mentioned in Appendix 'B'. | 12 | Each | |
| 132 | 132 | LED bulkhead luminaire 10W decorative type fixed in repair complete all as specified. Make :Havells cat No RUGBYNEONFT10WLED860SSYMTOPC or its equivalent in the makes mentioned in Appendix 'B'. | 3 | Each | |
| 133 | 133 | LED building secuity light 25 watt, including bracket made of GI tubing medium grade of suitable size and all connected accessories ( clamps, nut, bolt etc) fixed in repair complete all as specified. Make :Havells cat No ENDURAPEARLSL25WLED757SASYTOPC or its equivalent in the makes mentioned in Appendix 'B'. | 3 | Each | |
| 134 | 134 | Submain wiring with 2 runs of 6 sqmm single core PVC insulated FRLS sheathed copper cable and one run of 4 sqmm single core PVC insulated FRLS sheathed copper cable earth wire connecting to common earth dolly drawn through and including rigid non metallic PVC concealed conduit heavy duty including dismantling and taking down existing unservciable wiring with all accessories complete all as specified. Note : Two runs of 6 sq mm cable, one run of 4 sq mm cable and one run of PVC conduit shall be measured as one unit. | 160 | RM | |
| 135 | 135 | VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way, fixed in repair complete all as specified.\nNote : Unit rate quoted shall deemed to include the cost of MCCB and MCB SPN/SP/TP. | 1 | Each | |
| 136 | 136 | Single pole and neutral sheet steel powder coated distribution board for MCBs fitted with bus bar , neutral link ,earth bar and din rail suitable for use on 240 V, 50 Hz supply double door SP&N DB system 12 ways fixed in repair complete all as specified. | 6 | Each | |
| 137 | 137 | MCB SPN 06 to 40 Amps 240V including all termnials, fitting etc fixed in repair complete all as specified. | 6 | Each | |
| 138 | 138 | RCCBs for earth leakage protection 2 pole ,40 Amp rating, 30mA capacity suitable for 240 Volts fixed in repair complete all as specified. | 6 | Each | |
| 139 | 139 | MCB SP 06 to 40 Amps 240V including all termnials, fitting etc fixed in repair complete all as specified. | 48 | Each | |
| 140 | 140 | Exhaust fan of size 300 mm sweep, single phase double ball bearing, heavy duty motor, 70 W, noise level 40-45 dB, air delivery 1850 cum/hour with protective bird guard fixed in repair complete all as specified. Make : Havells model - Ventilair DB or its equivalent in the makes mentioned in Appendix 'B'. | 6 | Each | |
| 141 | 141 | CRCA sheet metal enclosure of suitable size for energy meter, glass fixed on door with locking system, HDPE gland fixed on pole / wall / panel as directed with clamp nuts,bolts, PCC etc fixed in repair including making good disturbed surface to match with the existing complete all as specified. | 6 | Each Job | |
| 142 | 142 | Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point, including earth work and excavation in any type of soil and testing on completion complete all as specified. | 1 | Each Job | |
| 143 | 143 | Taking down unserviceable/sreviceable Air termination any type any description complete all as specified. | 12 | Each | |
| 144 | 144 | Air termination single pointed aluminium rod 12 mm dia and 300 mm long with necessary fixing arrangement on roof complete all as specified. | 12 | Each | |
| 145 | 145 | Taking down unserviceable/ servicable roof conductors and down conductors (strip) any type any description complete all as specified. | 180 | RM | |
| 146 | 146 | Aluminium strip 25 x 3.15 mm including fixing arrangement etc. for roof conductors with rubber & bitumen washer & fixed to porcelain insulator on wall for down conductor complete all as specified. | 180 | RM | |
| 147 | 147 | Test point terminal block made of phosphorus bronze size 75 x 75 x 25 mm thick drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screws fixed to aluminium strip bracket fixed to porcelain insulator in wall as in repairs, complete all as specified. | 2 | Each | |
| 148 | 148 | Porcelain insulator of suitable size for support of earth strip into wall with two nut, bolt and washer of suitable dia complete all as specified. | 180 | Each | |
| 149 | 149 | GI tube light grade 40 mm bore laid in PCC foundation and protection/ fixed strip including welding works, clamp, nut/bolt as required ,complete all as specified. | 12 | RM | |
| 150 | 150 | GI tubing light grade 15mm dia for protection/fixed air termination single pointed copper rod complete all as specified. | 12 | RM | |
| 151 | 151 | Cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in cable duct and foundation for air termination etc including use and waste of form work as required complete all as specified. | 0.5 | Cum | |
| 152 | 152 | Earthing complete with copper earth plate electrode of size 60 cm x 60 cm x 3.15 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with Copper strip 32 x 6 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1, using (20 mm graded stone aggregate), mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering ,40 mm dia light grade GI pipe for lead protection, including alternate layers of char coal dust and common salt complete all as shown in electrical plate No 3 and connected to earthing test point all as specified and testing on completion including retrieving old existing earthing complete all as specified. | 2 | Each | |
| 153 | 153 | Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying pipe and getting out in hard /dense soil complete all as specified. | 8 | Cum | |
| 154 | 154 | Returning, filling in, including spreading, leveling, watering and well raming in layers not exceeding 25 cm in soft / loose soil complete all as specified. | 7.5 | Cum | |
| 155 | 155 | Removal of excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. | 0.5 | Cum | |
| 156 | 156 | Gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed in repair of the following sizes :- | |||
| 157 | 156.1 | 25mm dia | 6 | Each | |
| 158 | 156.2 | 40mm dia | 2 | Each | |
| 159 | 157 | Taking down worn out , unserviceable existing GI steel tubing of any size including connection all as specified. | 120 | RM | |
| 160 | 158 | GI tubing medium grade with all necessary fittings such as bends,elbows,tees,shorts pieces,disminishing pieces,caps & plugs laid in trenches/on floor complete all as specified (Note : Excavation and earth work shall be measured and paid for separately under relevant items) | |||
| 161 | 158.1 | 25 mm bore | 80 | RM | |
| 162 | 158.2 | 40 mm bore | 40 | RM | |
| 163 | 159 | Valve pit chamber of the internal size 60cmx60cmx60cm comprising of 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) foundation, 200 mm thick brick wall with sub class ‘B’ bricks in cement mortar 1:6, rendering internal surfaces of brick wall, and external surfaces upto 150 mm below ground levlel with 10mm thick in cement mortar 1:4, 50 mm thick PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) coping, 4 mm thick mild steel sheet cover with MS angle iron frame of size 40mmx40mmx6mm with locking arrangement and handle, Including painting steel and iron surfaces with two coats of synthetic enamel paint over one coat of red oxide primer including excavation end earth work in any type of soil complete all as specified. | 2 | Each Job |
AI Tender Summary
Tender Timeline
Jan 03, 2020
11:30 IST
Tender Published
Tender notice published.
CompletedJan 10, 2020
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 15, 2020
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender