Supply Of Machinery And Equipments For Use In Govt . Polytechnics Of J And K, as mentioned in NIT-Jammu And Kashmir

Supply Of Machinery And Equipments For Use In Govt . Polytechnics Of J And K-Digital Ph Meter , Do Meter , Nephelometer , Jar Test Apparatus , Conductivity Meter Apparatus , Bitumen Penetrometer , California Bearing Ratio Test Apparatus , Analogue Compression Testing Machine , Plc Trainer , Triac V-I Characteristics Kit ( Experimental Board , Computerized Universal Testing Machine , All Geared Lathe Machine , Servo Voltage Stabilizer , Two Post Lift , Exhaust Gas Analyzer With Pc , 3D Wheel Alignment Machine , Spark Plug Cleaner And Tester , Wi-Fi Card, Pci Based , Demonstrator Type Kit For Cordless Phone , Microcontroller 8051 Kit , Eprom Programmer , Experimental Kit For Error Detection & Correction Using Hamming Code , Experimental Kit For Study Of Parallel To Serial Data Conversion Using Usart .Delta Modulation & De-Modulation Kit , Am Transmitter , Pcm Kit , Pam Kit , Pwm Kit:- Npulse Output ( Frequency , Experimental Kit For Study Of Ask Modulation & Demodulation , Digital Tools , Experimental Kit For Plotting Frequency Response Of A Microphone , Experimental Kit For Plotting Frequency Response Of Loud Speaker , Demonstration Type Colour Television Receiver , Demonstration Type Black & White Television Receiver , Demonstration Type Kit For Mobile Phone , Microwave Oven , Set Top Box For Receiving Cable Tv Signals , Radio Receiver: Super Hetrodyne Type Rx, Frequency Range , Digital Ic Trainer Kit , Amplitude Modulation & De-Modulation Kit , Frequency Modulation & De-Modulation Kit , Antenna Network Trainer , Cathode Ray Oscilloscope , Experimental Kit For Study Of Ask, Fsk , Psk Modulation And Demodulation , Plc Experimental Kit , Arc Welding Machine , 3 Phase Squirrel Cage Induction Motor , Single Phase Induction Motor With Complete Panel , Fabric Thickness Tester , Beaker Dyeing Machine , Beasley’S Yarn Count Balance , Lab Model Winding Machine , Bflat Bed ( V Bed ) Weft Knitting Machine , Lab Model Jigger Machine , Refrigerator 220 Ltr Capacity With Stabilizer , Projection Microscope , Pilling Tester , Air Conditioner: ( 2 Ton ) Split With Stabilizer , Tearing Strength Tester , Color Printer , Colony Counter , Soxhlet Apparatus , Refrigerator , Lab Incubator , Blower Dryer Machine , Rotary Microtome , Scanner , Air Compressor Hp-2 With Silencer , Multimedia Projector , Scanner ,

INR 1500 /-

INR 120000.0 /-

Refer document

Name of Work:PROCUREMENT OF MACHINERY AND EQUIPMENT
	Sl. No.	Item Description	Item Code / Make	Quantity	Units
1	1	CIVIL ENGINEERING
2	1.001	Digital PH Meter\n• Should have Working range from 0 to 14. \n• Should have resolution 0.1/0.01 pH. \n• Should have Temperature compensation zero to 100 degree C with ATC \n• Should have RS.232C output and supply Data connector cable. \n• Should have Automatic calibration facility. \n• Should have data storage facility and record maximum and minimum value. \n• Should have 3 stage calibrations. \n• Should have digital display with 0.001 pH unit readability \n• Should supply Tri-combination pH/ATC electrode \n• Should supply Electrode + Standard buffer solution (pH 4.0, 7.0, 10.01 x 50ml for each bottle) + standard electrode holder +Ac /DC Adaptor.\n• Should be provided with an electrode holder/arm with smooth movement	item1	1	Nos
3	1.002	Do Meter\nTechnical Specifications\n• DO: 0 to 200.0% / 0 to 20.00ppm (mg/L)\n• Temperature Range: 32° to 122°F (0° to 50°C)\n• Max. Resolution: 0.1%, 0.01ppm (mg/L), 0.1°F/ °C\n• Accuracy: +2.0%FS, 0.4ppm (mg/L), +1.8°F/1°C\n• Power: four SR44W button batteries\n• Size: 1.4x6.9x1.6 inch (36x176x41mm)\nWeight: 3.8oz (110g\n	item2	2	Nos
4	1.003	Nephelometer\nTechnical Specifications\n• Display 3½ Digital LED.\n• Detector Photocell Photodiode.\n• Range 0-20 AND 0-200 NTU.\n• Resolution 0.01 NTU.\n• Accuracy ±2% FS ± 1digit.\n• Sample Systems 30 mm Clear Glass Test.\n• Light Source 6V Tungsten Lamp.\nPower 230V±10%, 50Hz AC.\n	item3	1	Nos
5	1.004	Jar Test Apparatus\nTechnical Specifications\n• RPM: Variable from 5 to 150 rpm''s with accuracy of +/- 1 rpm\n• Timer: 100 Hrs\n• Display: 16 x 2 LCD\n• Jar: for 1000 ml x 6 nos\n• Paddles: stirring paddles made of s. S. - 6 nos\n• Illumination: fluorescent white light\n• Dimension: 930mm(l) x 250mm(b) x 480mm(h)\n	item4	1	Nos
6	1.005	Conductivity Meter Apparatus\nTechnical Specifications\n• Conductivity Range: 0 to 199.9uS, 200 to 1999uS, 2.00 to 19.99mS\n• TDS/Salinity Range: 0 to 99.9ppm (mg/L), 100 to 999ppm (mg/L, 1.00 to 9.99ppt (g/L)\n• pH Range: 0.00 to 14.00pH\n• Temperature Range: 32° to 149°F (0° to 65°C)\n• Max. Resolution: 0.1uS, 0.1ppm (mg/L), 0.01pH, 0.1°F/ °C\n• Accuracy: +2%FS, +0.01pH, +1.8°F/1°C\n• Power: four SR44W button batteries\n• Size: 1.4x7.3x1.6" (36x186x41mm)\nWeight: 3.8oz (110g\n	item5	1	Nos
7	1.006	Bitumen Penetrometer \n• Confirming to IS: 1448 (Part 60)\n• Consisting of Steel Base, adjustable feet for leveling.\n• Plunger weighing 47.5 gm and each of 50 gm and 100 gm weight including cone and penetration unit.\n• Automatic Inbuilt Timer\n• Penetration Needle, Copper transfer dish, Aluminum Sample container – 2 sets\nComplete with all optional accessories\n	item6	2	Nos
8	1.007	California Bearing Ratio test Apparatus (Motorized)\n• Conforming to IS:2720 (XVI) – 1985\n• Electrically operated motorized load frame, capacity 5000 kg\n• Two speed operation – 1.25, 1.5 mm/minute\n• Mould-Gun Metal 150 ×175 mm\n• Perforated base plate, penetration piston extension collar – Gun metal 150 × 50 mm\n• Metal space disc, annular metal weight, slotted metal weight, proving ring, dial gauges, tripod stand, cutting collar, rammer 2.6 kg weight with drop of 310 mm, rammer 4.89 kg weight with drop of 450 mm etc complete as per IS 2720(XVI)\n• Complete with all optional accessories\n	item7	2	Nos
9	1.008	Analogue Compression Testing Machine: \n• Conforming to IS: 14858(2000) and calibrated with an accuracy of ± 1% as per the requirement of 1828(Class1).\n• Comprising of Loading Unit, Pumping Unit, and Digital display.\n• Capacity -2000kN.\n• LC-1KN\n• Max Vertical 370mm Clearance,\n• Max. Horizontal 340mm Clearance, Platen Size\n• Dia 220 mm and Piston Dia 222.25 mm.\n• Piston Stroke 50 mm\n• Specimen Size:- 100mm & 150mm Cube, 100mm &Dia 150mm Dia Cylinder\n• The hydraulic pumping unit should be electrically operated. The loads should be measured on Bourdon tube type load gauges which should be calibrated against certified proving rings. The load gauges should be fitted with a maximum load pointer and pumping units should operate with two-speed design. In the Electrically Operated Pumping Units, load gauge should be fitted with micro switches to switch-off the motor when the load approaches the maximum capacity of the gauge.\n• Suitable for operation on 220V, 50Hz, Single Phase, AC supply\n• Complete with all optional accessories\n Commissioning and Training should be included in the offer.\n	item8	1	Nos
10	2.001	ELECTRICAL ENGINEERING
11	2.002	PLC Trainer: \nSystem Specification : PLC , Make : ALLEN - BRADLEY Micro 800 Series 2080 - LC10 -12AWA /STD Equivalent Micro 810 controller, 8 IN 120/240 ac,4RLY, AC PWR 8 DIGIT INPUT / 4 Digit output, 24V DC,1.5 A POWER SOURCE 4" X 2"X2".I/P - O/P LED Indication on front Panel . Pc Interface FACILITY PC- PLC interface cable 2080- USB Adapter. USB Adapter Plug for 8010 12- pt only /. 2080 LCD, 1.5 LCD display and Key Board for micro 810 only. Necessary I/P - O/P Simulating devices. Ladder Diagram Programming on PC. SCADA SOFTWARE Connectivity for Plc (Optional) .Electrical Control Panel For Simulation Of Digital Circuits.\n	item9	1	Nos
12	2.003	SCR V-I Characteristics Kit (Experimental Board): \nExperimental Trainer Board comprising of experimental setup for performing V-I characteristics of SCR. The whole experimental set up must be marked (printed) on the sheet (PCB sheet) with specification of each component used and should be duly housed in a suitable metallic/robust enclosure. The board must include the following facilities: \n 1.In built power supply with indicator\n2 On/Off switch \n3. Protection against high current and transients. 4.Operating manual with detail procedure and specifications of components used \n5.Suitable numbers of Banana Patch cord(min. 4mm) required for the ETB\n	item10	6	Nos
13	2.004	TRIAC V-I Characteristics Kit (Experimental Board ):\nExperimental Trainer Board comprising of Experimental setup for performing V-I characteristics of TRIAC. The whole experimental set up must be marked (printed) on the sheet (PCB sheet) with specification of each component used and should be duly housed in a suitable metallic/robust enclosure. The board must include the following facilities:\n1. In built power supply with indicator.\n2 On/Off switch.\n3. Protection against high current and transients.\n4. Operating manual with detail procedure and specifications of components used.\n5. Suitable numbers of Banana Patch cord (min. 4mm) required for the ETB. \n	item11	6	Nos
14	3	MECHANICAL ENGINEERING
15	3.001	Computerized Universal Testing Machine: \nCapacity - 600 KN.\n>Least count 0.05KN.\n>Load accuracy + 0.5%\n>Accessories for tensile, compressive, bending, transverse shear load testing.\n>Max Clearance for tensile test – 50 to 800 m >Max Clearance for compression test -0 to 800 mm\n> Clearance between columns –500mm-600 mm\n> Ram Stroke – 250 mm\n>Crosshead Geared Motor 0.5 HP\n> Power pack Motor – 0.5 HP\n> Piston speed at no load – 0 to 100 mm\n> Clamping Jaws for round and flat specimen\n> Pair of Compression Plates\n> Table with adjustable rollers for transverse test\n>Suitable for operation on 440V, 50HZ, Three Phase AC Supply\n> Complete with manual.\n>The Installation, Commissioning and Training should be included in the offer.\nThe above setup should include latest PC with compatible software\n	item13	1	Nos
16	3.002	All Geared Lathe Machine(Heavy Duty): \nCentre to centre-1000mm, Centre Height-250mm, Spindle Bore-53mm; Motor-5h.p; Weight-1600-2000 kgs\nAccessories. Three jaw Chuck, Chip Tray Rear Tool Post, Steady Rest Follow Rest.\n	item14	1	Nos
17	3.003	Servo Voltage stabilizer\n15 KVA Three phase\nType: Indoor/Outdoor Floor mounting (Unbalanced) \nInput Voltage Range: 220V- 440V AC (Three Phase ) \nFrequency Range of Operation: 47 Hz – 53Hz\nOutput Voltage: 220VAC / 230 VAC + 2 % (Single Phase)\nOutput Voltage Adjustment: + 5%\nCorrection Speed: 20V/ Sec\nControl Circuit: Solid State Electronic (Thyristors Controlled )\nEfficiency: Above 95% at full load\nShort Time Overload Capacity: Not less than 110% for 5 minutes\nNot less than 125% for 1 minutes\nProtections*: . Output MCCB for OL & SC protection\nAlarms and Trippings*: . Output Voltage HI/LOW tripping \nMetering: Input/Output Voltmeter with selector switch\nIndications: Input, Output, Fault, Input Above specified limit, Input Below specified limit\nIndications: Mains, Output, Fault\nAmbient Temperature: -5 to 55 C\nRelative Humidity: Up to 90% non-condensing\nType of cooling: Air Cooled\n	item15	1	Nos
18	4	AUTOMOBILE ENGINEERING
19	4.001	Two post lift (Electro/Hydraulic)\n1. Lifting time 50 seconds\n2. Power Supply 380V/220V\n3. Lifting height 1800 mm\n4. Power of Motor 2.2 KW\n5. Lifting Capacity 3.5 Ton\n	item16	1	Nos
20	4.002	Driving simulator: \nA versatile indoor training simulator for imparting basic and advanced driving skills.\nIdeal for teaching driving to novice drivers, test drivers of different experience level, conduct refresher training for out of touch drivers.\nConfigurable for light, Medium and heavy vehicles with either left or right hand driving options.\n120 degree coverage, three monitors, original seat, realistic controls, dashboard assembly, safety belt, gauges, transmission and instrumentation gives real feel.\n30 CGI driving scenes of different types of roads, traffic, terrains and environmental conditions with rear and side view mirror insets.\nRecording/playback of faults committed by the trainee.\nThe trainer can inject on-line faults and obstacles to assess the reactions.\nBasic system has one instructor station and one driver station. \nEnvironmental conditions like rain, fog, snowfall, intensity of light can simultaneously be created. (Reputed brand only)\n	item17	1	Nos
21	4.003	Exhaust Gas Analyzer with PC: \nFeatures: 32 bit microprocessor based exhaust Gas Analyzer, Easy to use bench top design, declaration of conformity to OIML, Class 9 )ISO 3930) , Ideal for fault finding and regulated testing >measures, Co,HC,Co2,O2, and Lambda, Fast warm up time and fast response time, RPM and Oil Temperature Measurement, Print result via RS 232 and CNG vehicles. Product standard: OIML Class 0, ISO 3930 PC with monitor 21” & colour printer to be supplied as std accessory. Measured Gases: Using NDIR bench Co/Co2/HC Using Electrode- Chemical Cells, o2 Lambda: -0.5 – 2.0 Power Supply: 100-300 v/1 ph/50-60 Hz RPM:2,4 stroke, DIS,2-12 cyl Warm up time 120 sec: Fuel types: Petrol, LPG,CNG: Weight: 5 Kg (Approx) Probe Insertion Length: 300mm, Ambient Operating Range + 5 deg to +45 deg ARAI approved, CE certified & ISO certified\n	item18	1	Nos
22	4.004	3D Wheel Alignment Machine\nMachine has window based software data for all Indian cars with following details:-\n1. High precision digital camera (02 Nos.)\n2. Camera Pillar (01 No.)\n3. Target Plates (04 Nos.)\n4. 4-point wheel clamp (04 Nos.)\n5. Clamp bracket (04 Nos.)\n6. Mechanical turn table (02 Nos.)\n7. Steering Wheel lock (01 No.)\n8. Brake paddle depressor (01 No.)\n9. Computer 18” (HP/Dell/ACER) with latest configuration with inkjet printer (01 No.)\n	item19	2	Nos
23	4.005	Spark plug cleaner and tester:-\nLength 350mm, width 265mm, height 280mm, sparkplug cleaning chamber consisting of an abrasive system connected to double acting value for blasting pressure, regulator is provided for reducing any excess air and releasing pressure in chamber. Different rubber adopters provided for cleaning plugs of 10mm,12mm,14mm,18mm size.\n	item20	1	Nos
24	5	ELECTRONIC & COMMUNICATION ENGINEERING
25	5.001	Wi-Fi Card, PCI based\nStandards: IEEE 802.11n, IEEE 802.11g; Interface: PCI 2.0; \nWireless Frequency Range: 2.4GHz to 2.4835GHz;\nSecurity: -WPA, WPA2; Wi-Fi Protected Setup (WPS).\n	item21	3	Nos
26	5.002	Demonstrator type kit for Cordless Phone\nwith different test points for observation of waveforms and troubleshooting using block diagram approach range: 50m (or more) included accessories: batteries and power adapter\n	item22	1	Nos
27	5.003	Microcontroller 8051 Kit \n8051 Microcontroller operating at 11.0592MHZ. EPROM.64KB on chip Flash memory, Two 16 – bit programmable on chip Timer, 50 pin FRC connector for system bus expansion, 20 pin FRC connector for user interface from 8255, 9 pin D type connector for RS 232C interface, Different selectable baud rates, 101 PC type keyboard for entering user address/data and for commands. Built in line by line Assemble and Disassemble. Facility to connect to PC. Supports Assembly and “C “ language\n	item23	4	Nos
28	5.004	EPROM Programmer: \nUSB 8051 Programmer AT89C series and AT89S series from Atmel. Supports 8 pin serial EEPROM ICs, Single ZIF socket for easy insertion and removal of ICs for programming. Software compatible with Windows XP, Windows Vista and Windows 7\n	item24	2	Nos
29	5.005	Experimental kit for Error detection & correction using Hamming code: \nwith built in power supply; On Board Digital Data signal generator and clock generator and a word length of 8, or more; with on-board noise insertion circuit and data receiver\n	item25	2	Nos
30	5.006	Experimental kit for study of parallel to serial data conversion using USART: \nwith built in power supply; On Board Digital Data signal generator and clock generator and LEDs for observation of Input and Output\n	item26	2	Nos
31	5.007	Experimental kit for study of Time division Multiplexing & De-Multiplexing: \nwith built-in power supply, variable on-board data signal generation and LED Indication for outputs\n	item27	2	Nos
32	5.008	Experimental kit for study of FSK modulation & Demodulation: \nwith built-in power supply, variable on-board data signal and carrier generation and different test points for observation of waveforms\n	item28	2	Nos
33	5.009	Delta Modulation & De-Modulation kit:\nInput Channel : Time Division Multiplexed Serial Crystal Frequency Sampling Clock Frequency : 50, 100, 200 & 400 KHz (Switch selectable)On board Generator :Synchronized & Adjustable Amplitude Sine Wave Generator of 1 KHz& 2 KHz, Separate Variable DC level ,Integrator : Four integrator gain settings Normal, X 2, X 4,Low Pass Filter (Cut Off Frequency 4.8 KHz).\n	item29	2	Nos
34	5.01	AM Transmitter:\n Audio Oscillator with adjustable Amplitude & Frequency (300 Hz - 3.4 KHz), Audio Output: Amplifier with speaker Modulators: Balanced Modulator with Band pass Filter (1 MHz) - 2 nos., Balanced Modulator: 1 No. (455 KHz) Ceramic Band pass Filter: 1 No. (455 KHz), carrier Frequency : 1 MHz, Transmitter Amplifier Output gain adjustable) DSB (1 MHz), SSB (1.445 MHz) connected to Antenna/cable\n	item30	4	Nos
35	5.011	PCM kit\nAudio codec : Stereo Inputs : Single ended Number of bits per channel : 16 bits (Left and Right)Sampling Rate : 48, 24, 12 and 6 KHz System clock : 256 x (Sampling clock) Clock Source on-board, Analog Signal Sinusoidal with Frequency up to 3.3 KHz and Amplitude 0 - 5 Vpp\n	item31	2	Nos
36	5.012	PAM kit.\nPulse Output (frequency) : 8kHz, 16kHz, 32kHz ,Function Generators: Sine wave & Square wave with Gain Adjustable\n	item32	2	Nos
37	5.013	PWM KIT:-\nPulse Output (frequency) : 8kHz, 16kHz & 32kHz, Function Generators: Sine wave & Square wave with adjustable gain ,Voice Communication : Voice Link using Dynamic Mini Microphone & Speaker, AC Amplifier : With adjustable gain\n	item33	2	Nos
38	5.014	Experimental kit for study of ASK modulation & Demodulation: with built-in power supply, variable on-board data signal and carrier generation and different test points for observation of waveforms	item34	2	Nos
39	5.015	Digital Tools\n( Logic Clips, Logic Pulsar, IC Tester):\n Tests a wide range of Digital IC's of TTL 74 Series, 40/45 Series of CMOS IC’s ,\n Peripherals like 8255, 8279, 8253, 8259, 8251, 8155,6264,62256,8288,8284. Auto search facility of IC’s Test by: Truth table/sequence table comparison\n ZIF: 40 pin DIP ZIF sockets ,\n Key pad with numerical & functional keys,\n Display: 9 Digit Seven Segment Display\nSupply Input Voltage: 230V AC (Digital IC Tester)\n	item35	1	Nos
40	5.016	Experimental kit for plotting frequency response of a microphone: With built-in power supply & Amplifier, speaker and frequnce generator should be incorporated.	item36	2	Nos
41	5.017	Experimental kit for plotting frequency response of loud speaker: With built-in power supply & Amplifier microphone and frequnce generator should be incorporated.	item37	1	Nos
42	5.018	Demonstration type Colour Television Receiver: with different test points for observation of waveforms and troubleshooting; System control circuit, video IF, sound, tuner section, horizontal oscillator, horizontal output, vertical oscillator, vertical output, video & chroma section, power supply, av sections blocks	item38	1	Nos
43	5.019	Demonstration type Black & White Television Receiver: with different test points for observation of waveforms and troubleshooting	item39	1	Nos
44	5.02	Demonstration type kit for mobile phone: with different test points for observation of waveforms and troubleshooting using block diagram approach	item40	1	Nos
45	5.021	Microwave oven: Demonstration type kit for Micro wave own with different test points for observation of waveforms and troubleshooting using block diagram approach\n 20 litres; 2450 MHz microwave frequency; 5 Microwave Power Levels\n	item41	1	Nos
46	5.022	Set Top Box for Receiving Cable TV signals: \nwith RF cable input, video & audio out RCA connections\n	item42	2	Nos
47	5.023	Radio Receiver: Super hetrodyne type Rx, Frequency Range : 980 KHz to 2060 KHz, Intermediate Frequency : 455 KHz Tuning with variable capacitor (ganged), Dial marking on board, Receiving media : Telescopic antenna / Cable Audio Output : Amplifier with speaker Automatic Gain Control : Switchable	item43	1	Nos
48	5.024	Digital IC trainer Kit: \nBuilt in power supply providing regulated DC for operationAt least 8 Logic inputs switches, At least 8 LEDs for observing output, Components On-board:NOT, AND, OR, NOR, NAND and XOR gates,\n4 Bit Universal Shift Register,\n4 Bit Adder/Subtractor,\nFlip Flops - RS, JK\nMultiplexer, De-multiplexer, Encoder, Decoder\nOn-board Seven segment Display with inbuilt decoder ICPatch Cords (at least 30)\n	item44	1	Nos
49	5.025	Amplitude Modulation & De-Modulation kit.\nAudio Oscillator(Sine Function) Output : 0-10 VPP , Frequency : 200Hz - 10 KHz, Carrier Output Frequency(Sine & Cosine),Output : 0-10 VPP, Frequency : 2KHz- 100 KHz, Modulator, Phase Locked Loop detector , Low Pass Filter:10 KHz cut-of frequency.\nOutput Amplifier with adjustable Gain; with provision of obtaining DSBSC, SSB modulation using jumpers on the same kit.\n 02\n	item45	2	Nos
50	5.026	Frequency Modulation & De-Modulation kit.\nAudio Oscillator(Sine Function) Output : 0-10 VPP , Frequency : 200Hz - 10 KHz,Carrier Output Frequency(Sine & Cosine),Output : 0-10 VPP, Frequency : 2KHz- 100 KHz, Square law Modulator, Diode detector for demodulation with selectable RC constant and Output Amplifier with adjustable Gain\n	item46	2	Nos
51	5.027	Antenna network Trainer\nTest points to measure the test signals. Different types of Antennas On board RF & Tone Generators, Transmitting and Receiving levels observed On Built- in Meters, Functional Block indicated On- board Mimics, Fully Documented Operating Manual and Polar Charts. Gain and beam width study. Element current, Front-back ratio study, Antenna-matching.\n	item47	1	Nos
52	5.028	Cathode Ray Oscilloscope\nTwo Channel Channel I, Channel II, Channel I & II alternate or chopped, X-Y operation,(Ratio 1:1 Input via CH II), Add/Sub CH I ± CH II, Invert CH II, Intensity and Focus Control, X-pos, Y-Pos controls\nBandwidth : DC -30 MHz\nTrigger Bandwidth : 40 MHz\nModes : Auto/ Level.\nSource : CHI, CH II, ALT-CH I/ CH II\nExt. Slope : Positive or Negative\nComponent Tester (built in)\nDisplay : 8×10 cm\nSignal coupling modes - DC, AC\nCalibrator : Square Wave generator 1KHz, approximately, 0.2 V\nIncluded Accessories : BNC to BNC -2no, 1x/10x switchable probes - 02no\n	item48	5	Nos
53	5.029	Experimental kit for study of ASK, FSk ,PSK modulation and demodulation \nwith built-in power supply, variable onboard date signal and carrier generation and different test points for observation of waveforms The system must have facility for digital data\ninputs and outputs, along with switches and indicators.\n16x2 LCD Display, Hardware reset switch to refresh process\n Clock Generation of 10KHz output, Data Clock and serial data test point.\n Test points to measure and test signals, On board programming facility for development\n Switches 13nos with logic Led indicators, Selectable data generator\n 8-bit data Generator DIP switches\n On board 3.3v and 5v power supply provision with test points\n Clock Generation of 10KHz output\n Data Clock and serial data test point\n	item49	3	Nos
54	5.03	PLC Experimental Kit\nAllen Bradley PLC Configurable to both 24 V DC & 230 V ac, built in 24V DC power supply.\nWith digital and analog inputs & outouts.\n16 I/O LED indications on front line panel, 64 kbytes memory.\n8 I/O simulating devices(Toggle switch)\nProvision to interface PLC module with customized system and for student project interface.\nRelays protected output.\nMain socket with self illuminated switch and dual fuse protection.\nAll major components is covered with acrylic or transparent sheet.\nUSB based programming.\nSimulation based\n1) Sequential motor starter interface.\n2) Star Delta interface\n3) DOL Starter\n4) Water level controller\n5) Reaction vessel interface\n6) Resistance welding interface.\n7) Traffic Light\n8) Car parking interface\n9) Piston cylinder interface\nReal time working model for automatic sliding gate and Lift control sytem .Ladder programming & PLC to PC Communication software.\n	item50	1	Nos
55	5.031	Arc Welding machine\nArc welding Transformer air cooled with welding current range 150 Amperes.\nContinuous hand welding current @ 60% Duty cycle 90 Amp @ 100% Duty cycle 150 Amp\nOpen circuit voltage 55 Volts \nWelding voltage 18-22Volts , \nMaterial of wheel :- Cast iron\nInput Voltage 220 to 240 V( single Phase),\n	item51	1	Nos
56	5.032	3 phase Squirrel cage Induction motor\n5 H.P Three phase squirrel cage induction motor (Star- Delta starter) with complete panel ( proper Loading arrangement, 2 Wattmeter, voltmeter, ammeter required as per specification) to measure the efficiency, power factor, full load current, no load current and must have provision to change the direction of rotation of the motor. The panel must have provision to perform no load and blocked rotor test\n	item52	1	Nos
57	5.033	Single phase induction motor with Complete Panel\nMains Supply : Single Phase, 230V ±10%, 50Hz\nSingle Phase Induction Motor Type : Capacitor start\nRating : 1HP \nVoltage rating : 230V ±10%\nSpeed : 1440 RPM (No Load)\nInsulation : Class ‘B’\nLoading Arrangement : Mechanical\nBrake drum/Pulley : Aluminum Casted\nAnalog Meters Used, Voltmeter (MI) : 0 -300V, Ammeter (MI):0 -10A, \nWattmeter : 1500W, MCB (SP) : 10A, Tachometer : 20,000 RPM\n	item53	1	Nos
58	6.001	TEXTILE TECHNOLOGY\n\n
59	6.002	Fabric thickness tester: \nThickness range up to 7.5 mm\n	item54	1	Nos
60	6.003	Beaker dyeing machine:\n Electric Supply: Single phase 220 Volts, Ac supply, Heater supply : 3000 watt single phase\nCapacity of beaker: 250 ml beaker X 12\nCarriage Rotation: At 22rpm(2rpm)\nMaximum operating temp.:135 degree\nMaximum rate of heating : 3.5 degree /min\n	item55	1	Nos
61	6.004	Beasley’s yarn count balance:\n Bench type balance with calibration facility, balance capable to measure yarn count of warp and weft of small lengths of fabric in cotton ,linen ,woollen, silk and worsted system. Metallic template graduated in cotton ½ cotton, worsted, woollen, silk and linen. standard weight containing two standards weights (hanging type)\n	item56	1	Nos
62	6.005	Lab Model Winding Machine\nDrum Winding \nNo. of Drum- 02\nWith Disc Type Tensioner\nAutomatic with Stop Motion \n	item57	1	Nos
63	6.006	BFlat Bed ( V Bed) Weft Knitting Machine \nLab Model\nLatch Needle type\nWidth of Fabric – at least 12 inches\nGauge at least 8\nDelivery Speed – at least 1-2 mt/ min\n	item58	1	Nos
64	6.007	Lab Model Jigger Machine\nWidth at least 6 inches\nSemi Automatic\nSpeed- 5 – 6 mtr/min\n	item59	1	Nos
65	6.008	Refrigerator 220 ltr capacity with Stabilizer	item60	1	Nos
66	6.009	Projection Microscope \nwith 5x, 10x, 20x, 40x & 100x lenses with fiber cross section kit, high resolution camera and imaging software with measurement facilities\n	item61	1	Nos
67	6.01	Pilling Tester\nDigital display, Pre Set Counter, Cork Lining 3mm, 1/4Motor Rotation of Boxes 60 rpm Size of Specimen125X125 mm\n	item62	1	Nos
68	6.011	Air Conditioner: ( 2 ton) Split with Stabilizer	item63	2	Nos
69	6.012	Tearing Strength Tester ( Elmendorf Principle)\nTemplate of 100mm \nRange 0 – 600 gm, 0 – 3200 gm, 0 – 6400 gm\n	item64	1	Nos
70	6.013	Color Printer \nPrinter Type – Ink Tank, Functionality- All in one \nPrinter Output- Color\n	item65	2	Nos
71	7.001	FOOD TECHNOLOGY\n\n
72	7.002	Colony Counter: \nType: Microprocessor Based\nDisplay: LED / LCD / Touch Screen, 3 digits\nCalibration: up to 3 points with auto buffer\npH Range (pH) 0.00 to 14.00\nAccuracy (pH) +- 0.05\nCorrosion Resistant: Yes\nPower Requirements: 230 V +- 10, 50 Hz AC\nModes : pH mV- C\nParallel temperature indication: Yes\nTemperature Compensation Type: Automatic\nTemperature Accuracy (Degree C) +- 0.3\nTemperature Compensation Range (Degree C)\nResolution (pH)\nOperating Humidity: RH in (%)\nOperating Temperature (Degree C)\n0 to 100, 0.01, 87, 25\n	item66	1	Nos
73	7.003	Soxhlet Apparatus\nDigestion and distillation combined unit yes\nFume Hood: Available\nHeater: Mantle Type (2 sets, One for Digestion and one for distillation)\nUnit supplied: With glass parts\nConstruction: MS Powder coated\nHeating capacity of the heater (Watt): 500\nUnits of test: 6\nEach heating unit fitted with individual energy regulator: yes\nSupplied complete with condenser rack, connecting tubes and clamps: yes\nPower:230V plus minus 10 percent, 50 Hz\nFlask capacities (ml)300\nWeight of the complete unit (grams)5000\nDetails of other accessories to be supplied along with the unit\nCOMPLETE WITH 6 SETS OF GLASS PARTS\n	item67	1	Nos
74	7.004	REFRIGERATOR: Conformity to Indian StandradIS:1476 latest for Direct Cool\nStorage Volume (NET CAPACITY) (Liters)300\nType of Door Double\nInsulation Puff\nMethod of Defrosting Direct Cool\nBEE Star Rating as on date5\nCoil Material Copper (Cu)\nType of Finish Metallic\n	item68	1	Nos
75	7.005	LAB INCUBATOR: \nConformity to Standards CE\nType of Incubator Bacteriological Incubator\nCapacity in liters100-200\nMaterial of Outer Chamber CRCA (powder coated point) Steel\nAmbient Temperature in ?C5?C above ambient to 60 ?C (Bacteriological Incubator)\nInsulation Ceramic Wool\nType of Display LED\nType of Shelves Removable\nNumber of shelves3\nAuto power break off Yes\nWarranty in Years1\n	item69	1	Nos
76	7.006	Blower Dryer Machine (Drying and cooling of flour):\nType of machine-Automatic\nAlignment-Horizontal\nProcess of Pulverizer-Grinding\nPulverizer Body Material-Mild Steel\nPulverizer Chamber Body-Stainless Steel 304\nPulverizing Tool Material-Mild Steel\nGrinding Capacity (Kg/hr)-50.0\n	item70	1	Nos
77	8	MEDICAL LAB TECHNOLOGY
78	8.001	Rotary Microtome: \nRange of cutting thickness: 1-40(um) Minimum division of cutting thickness adjustment 1 um +/-,10% accuracy of cutting 25x30mm cutting section Continuous cutting without need to move the blade or turn the blade holder\n	item71	2	Nos
79	9	Garment Technology
80	9.001	SCANNER A4\n	item72	2	Nos
81	9.002	Air Compressor HP-2 with silencer	item73	2	Nos
82	10	COMPUTER ENGINEERING
83	10.001	Multimedia Projector: \nTechnology: LCD\nProjection Method: Front\nNative Resolution:1024 x 768 (XGA)s\nBrightness: 4000 Lumens\nContrast Ratio (Minimum): 20000:1\nZoom Feature: Yes\nThrow Ratio 1.40:1 TO 2.27:1\nAspect Ratio 4:3\nKeystone Correction: Automatic & Manual Both\nProjection Lamp: UHP\nMinimum: Life of Projection Lamp (In Normal Mode) \n 2500 Hours\nInbuilt Speaker Yes\nHDMI/DVI Port Yes\nStorage Media Port (USB- Type A) Yes\nWiFi Availability Yes\nLAN Connectivity Yes\n	item74	1	Nos
84	10.002	SCANNER A4\nType: Flatbed, \nSCAN RESOLUTION, OPTICAL\nUp to 600 dpi (colour and monochrome, ADF); Up to 1200 dpi (colour and monochrome, flatbed)\nDUTY CYCLE (DAILY)\nUp to 1,500 pages (ADF)\nBIT DEPTH\n24-bits external 48-bits internal\nSCAN FILE FORMAT\nFor text and images: PDF, JPEG, PNG, BMP, TIFF, TXT(Text), RTF (Rich Text) and searchable PDF\nSCANNER ADVANCED FEATURES\nOne pass duplex scanning; One button scan; OCR; Configurable scan shortcuts\nCONNECTIVITY, STANDARD\nHi-Speed USB 2.0\n	item75	1	Nos