Military Engineer Services-MES has published Special Repairs To Certain Smqs And Living In Billets Bldg Nos P-152 , P-153 , T-199 And T-357 At Af Station Utarlai .. Submission Date for this Tender is 26-12-2019. Civil Work Tenders in GE (AF) UTARLAI Rajasthan. Bidders can get complete Tender details and download the document.
| Name of Work: SPECIAL REPAIRS TO CERTAIN SMQs & LIVING IN BILLETS (BLDG NOs: P-152, P-153, T-199 & T-357) AT AF STATION UTARLAI. | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Taking down chowkhats or frame n exc 1.50 Sqm each with shutters (W/out taking off shutters from the frames). | 32 | Each | |
| 2 | 2 | Taking down chowkhats or frame exc 1.50 Sqm but n exc 4 Sqm each with shutters (W/out taking off shutters from the frames). | 32 | Each | |
| 3 | 3 | Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each. | 26 | Each Leaf | |
| 4 | 4 | Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing and adjusting and refixing in the same opening. | 20 | Each Leaf | |
| 5 | 5 | S&f pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6. | 80 | Rm | |
| 6 | 6 | S&f pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6. | 80 | Rm | |
| 7 | 7 | All as per Sl item 6 above but of size 75 X 60 mm as in cupboard frames. | 160 | Rm | |
| 8 | 8 | S&F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with decorative veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated. | 56 | Sqm | |
| 9 | 9 | S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) | 45.9 | Sqm | |
| 10 | 10 | S & F rubber gasket of thickness atleast 2.5 mm and width 60 mm for wooden doors to cover the gap between door and floor etc complete all as spd and directed by Engr-inCharge. | 32 | Rm | |
| 11 | 11 | S & F 25 mm thick flush shutter solid core construction with block board core and plywood face panels commercial type on both sides. | 64 | Sqm | |
| 12 | 12 | S & F butt hinges medium weight cold rolled mild steel 100 mm long. | 192 | Each | |
| 13 | 13 | S & F Aluminium anodised barrel tower bolts, 150 mm long all as spd and directed. | 116 | Each | |
| 14 | 14 | S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. | 32 | Each | |
| 15 | 15 | S & F Aluminium hasp and staple 100 mm size. | 32 | Each | |
| 16 | 16 | S & F aluminum anodized handle cast type D-shape of 100 mm size complete all as spd and directed. | 128 | Each | |
| 17 | 17 | S & F for Aluminium handles, cast type anodised 125 mm long of D-shape all as specified. | 116 | Each | |
| 18 | 18 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6.. | 156.8 | Rm | |
| 19 | 19 | S & F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications. | 40.6 | Sqm | |
| 20 | 20 | S & F 100 mm aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21 and will be fixed to the frame with stainless steel screws with triangular head all as specified and directed. | 96 | Each | |
| 21 | 21 | S&F Aluminium tower bolt 150 mm with stainless steel screws with triangular head complete all as spd and directed. | 64 | Each | |
| 22 | 22 | M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats. | 1.1 | Cum | |
| 23 | 23 | S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples | 37 | Sqm | |
| 24 | 24 | -do- here-in-before but fixed in repair. | 37 | Sqm | |
| 25 | 25 | Forming jambs, etc. in CM 1:4, to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete | 41 | Sqm | |
| 26 | 26 | S & F for box steel windows with both types of panel viz panel for fixing glass and panel for wiremesh incl all accessaries and ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh complete with mild steel stay etc) incl all accessaries all as spd and directed by Engr-in-Charge. | 36 | Sqm | |
| 27 | 27 | S&F steel window handle left/right 150 mm | 30 | Each | |
| 28 | 28 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones all as specified. | 80 | Sqm | |
| 29 | 29 | S & F for 3mm thick ordinary sheet glass and glazing with oil putty in square nexc 0.5 sqm in each pane. | 101 | Sqm | |
| 30 | 30 | Do but pin head glass -ditto- | 15 | Sqm | |
| 31 | 31 | S & F 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete. | 32 | Each | |
| 32 | 32 | S & F in repairs, 100 mm single action spring hinges, mild steel with steel wire spring, stove enamelled, black all as specified. | 8 | Each | |
| 33 | 33 | Taking down cement plaster incl raking out joints, hacking for key and scrubbing down with water. | 1120 | Sqm | |
| 34 | 34 | M&L for rendering 10mm thick on fair faces of brick work or conc surfaces in cm 1:6 finished even and smooth w/o using extra cement. | 640 | Sqm | |
| 35 | 35 | M&l for rendering 5mm thick in CM 1:4 including water proofing compound over 10mm thick rendering in CM 1:6 on external wall surfaces complete all as specified & directed. | 320 | Sqm | |
| 36 | 36 | M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces complete all as specified & directed. | 160 | Sqm | |
| 37 | 37 | M & L for rendering 10mm thick in cm 1:4 as setting coat and 5 mm thick in cm (1:4) as finishing coat as in chajja. | 16 | Sqm | |
| 38 | 38 | M&l preparations of new wooden surfaces of any description not over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as directed. | 96 | Sqm | |
| 39 | 39 | M&L preparation of new steel surfaces of any description, over 10 cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide or zinc chrome primer complete all as directed. | 79.2 | Sqm | |
| 40 | 40 | M&l preparations of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint incl preparation of existing surfaces. | 472 | Sqm | |
| 41 | 41 | M&L preparation of old steel surfaces of any description, over 10 cm in width or girth, and applying one coat of synthetic enamel paint incl preparation. | 350 | Sqm | |
| 42 | 42 | M & L preparation new plastered surface of walls & apply wall care putyy on walls in two layers complete all as specified & directed. | 640 | Sqm | |
| 43 | 43 | M & L preparation new plastered surface of walls & apply two coats of oil bound distemper over a coat of alkali resistant primer on walls complete all as spd and directed. | 640 | Sqm | |
| 44 | 44 | M & L for two coats of oil bound distemper over a coat of alkali resistant primer incl a layer of wall care putty in two layers after complete removal of existing treatment all as specified and as directed. | 2210 | Sqm | |
| 45 | 45 | M & L for one coat of white wash on ceiling incl preparation of existing surface all as specififed and as directed. | 1200 | Sqm | |
| 46 | 46 | M & L for one coat of white wash on wall incl preparation of existing surface all as specififed and as directed. | 390 | Sqm | |
| 47 | 47 | M & L three coats of white wash on newly plastered surfaces of ceiling incl preparation of surfaces all as specified. | 160 | Sqm | |
| 48 | 48 | M & L for two coat of cement base paint over a coat of primer incl preparation of new surfaces all as spd. | 320 | Sqm | |
| 49 | 49 | Demolition of cement concrete of any description and in any position not otherwise specifically provided. | 22 | Cum | |
| 50 | 50 | M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection. | 160 | Sqm | |
| 51 | 51 | M & L rendering 10 mm thick wall plaster in CM 1:3 even & smooth without using extra cement mixed with water proofing compound and application of two coat of Dr fixit Bathseal WPC (02 coats of 01 mm thick @ 1 litre per 6.97 Sqm or 75 Sqft). | 32 | Sqm | |
| 52 | 52 | Supply only water proofing compound. (Make: Dr Fixit Bathseal WPC). | 5 | Litre | |
| 53 | 53 | M & L for applying a layer of hot blown bitumen of 85/25 penetration grade @ 1.20 Kg/Sqm incl cleaning the surface of roof or sunken etc complete all as specified. | 16 | Sqm | |
| 54 | 54 | M & L for polythene film, 400 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m all as specified. | 16 | Sqm | |
| 55 | 55 | M&L PCC 1:5:10, type E-2 using 40mm graded stone aggregates as in filling under sunken floors. | 18 | Cum | |
| 56 | 56 | S&F in repairs, vitreous china squatting pan “ORISSA” pattern size 580x440mm white with integral foot rests including connection to trap, and to flushing pipe, etc. complete including making good to floor alongwith flush pipe and P-trap complete all as specified. | 16 | Each | |
| 57 | 57 | S & F in repairs, white Viterious China Wash down W/C pedestal pan and trap, including connections to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, incl seat and cover complete all as spd. | 2 | Each | |
| 58 | 58 | S & F in repairs PVC low level cistern 10 Ltr cap with inlet ball valve float and handle incl bracket and PVC flushing pipe 32mm dia 90 cm long (colour white) as in repairs. | 18 | Each | |
| 59 | 59 | S & F in repairs wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, including CP waste coupling & PVC waste pipe of 32 mm dia all as specified. | 16 | Each | |
| 60 | 60 | S & F in repairs sink of overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm, made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl waste fittings and LDPE pipes, incl bedding in cement mortar on to dwarf wall, fixing on and incl cast iron cantilever brackets and connecting union to pipe etc. complete all as spd and dirceted. | 16 | Each | |
| 61 | 61 | S & F in repairs stainless steel plate rack of size 30"x36"x10" incl all accessories all as specified and as directed by Engr-in-Charge. | 16 | Each | |
| 62 | 62 | S & F in repair, PVC connections 45cm long with PTMT nut and washers on both ends. | 50 | Each | |
| 63 | 63 | S & F in repairs, 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed | 16 | Each | |
| 64 | 64 | S & F in repairs, CP bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified. | 64 | Each | |
| 65 | 65 | S & F in repairs 15 mm bore chromium plated angle cock cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes. | 32 | Each | |
| 66 | 66 | S & F in repairs, 15 mm bore chromium plated concealed type stop valves cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes. | 16 | Each | |
| 67 | 67 | S & F in repairs 20 mm gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed | 16 | Each | |
| 68 | 68 | ditto but 25 mm dia | 16 | Each | |
| 69 | 69 | S & F in repairs Chromium plated 80 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union as in repairs. | 16 | Each | |
| 70 | 70 | S & F in repairs tubular towel rail, brass chromium plated, 20 mm dia, D type, 60 cm long between flanges and fixed complete all as spd and directed. | 16 | Each | |
| 71 | 71 | Taking down or up GI tubing 15mm bore incl cleaning for refixing etc. | 192 | Rm | |
| 72 | 72 | ditto but 20 mm dia | 24 | Rm | |
| 73 | 73 | ditto but 25 mm dia | 72 | Rm | |
| 74 | 74 | Refixing old steel tubing and connections in new or old position (wall, ceiling, floor etc) 15mm bore. | 19.2 | Rm | |
| 75 | 75 | ditto but 20 mm dia | 7.2 | Rm | |
| 76 | 76 | ditto but 25 mm dia | 29 | Rm | |
| 77 | 77 | S&F GI tubing 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors 15mm bore. | 172.8 | Rm | |
| 78 | 78 | ditto but 20 mm dia | 16.8 | Rm | |
| 79 | 79 | ditto but 25 mm dia | 43 | Rm | |
| 80 | 80 | Taking down rain water pipe any size incl all fittings. | 66 | Rm | |
| 81 | 81 | S & F PVC 110 mm bore pipes 4.0 Kg/Sqcm single socketed in any length with rubber ring joints fixed to walls with stailess steel clamps at an interval of 2mtr. | 66 | Rm | |
| 82 | 82 | S & F PVC bends 110 mm bore any radius complete with PCC 1:2:4 base for supporting pipe and stainless steel clamps. | 20 | Each | |
| 83 | 83 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately). | 8 | Each | |
| 84 | 84 | Dismantling water tanks and removing to store. | 8 | Each | |
| 85 | 85 | M & L for PCC 1:3:6 type C-2 (40 mm graded stoneaggregate) 75 mm thick & finishing the cement conrete surface even & smooth without using extra cement all as spd. | 24 | Sqm | |
| 86 | 86 | S & F PVC water tank 500 Ltrs including 25mm bore PTMT float valve. | 8 | Each | |
| 87 | 87 | S & F cover lid of PVC water tank 500 ltrs all as spd and directed. | 8 | Each | |
| 88 | 88 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) | 5.8 | Cum | |
| 89 | 89 | M&L for PCC (1:2:4) type B-1, 25mm thick as in floors finished even and fair. | 120 | Sqm | |
| 90 | 90 | Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc | 743.65 | Sqm | |
| 91 | 91 | S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match. | 120 | Sqm | |
| 92 | 92 | S&F non skid coloured ceramic tiles of 7 mm to 8 mm thick (square/rectangular) polished, area of each tile exc 0.18 not exc 0.38 sqm in floors, over and including 15mm thick screed in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match. | 743.65 | Sqm | |
| 93 | 93 | ditto as above but on vertical surfaces over and incl 10 mm thick cement plaster in CM 1:4. | 74.365 | Sqm | |
| 94 | 94 | S&F glazed ceramic coloured tiles in vetical surfaces size 350x450x7mm thick, over & including 10mm thick screed in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match incl taking down old plaster. | 506 | Sqm | |
| 95 | 95 | Demolition of stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar | 2.8 | XSqm | |
| 96 | 96 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. (Size of granite should be that maximum two piece to be fitted on the platform). | 28 | Sqm | |
| 97 | 97 | M & L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. | 2.4 | Sqm | |
| 98 | 98 | Rounding to the edge of stone slabs on edge on cooking plateform | 40 | Rm | |
| 99 | 99 | M & L for machine cut kota stone slab flooring 20-25mm thick over & incl 15mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. | 79 | Sqm | |
| 100 | 100 | ditto as above but 15 to 18mm thick kota stone on vertical surfaces over and incl 10 mm thcik cement plaster in CM 1:4. | 24 | Sqm | |
| 101 | 101 | S & F in repairs mild steel 20 mm dia drapery rod, decorative type, with PVC coating and fixed in repairs complete all as spd and directed. | 192 | Rm | |
| 102 | 102 | S & F in repairs mild steel bracket, decorative, superior quality, suitable for 20 mm dia drapery rods all as spd and directed. | 77 | Pair | |
| 103 | 103 | S&F in repairs (600mmX450mm) bevelled edge mirror of selected quality glass mounted on 3mm thick ACP sheet fixed to wooden plugs with chromium plated brass screws & cup washers complete all as specified & directed. | 16 | Each | |
| 104 | 104 | S&F CP grating of best quality of size 125mm complete. | 48 | Each | |
| 105 | 105 | S&F CP grating of best quality of size 100mm complete. | 10 | Each | |
| 106 | 106 | M & L for framed brackets of angles cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, alongwith anchor bolt of length 150 mm long and not less than 10 mm diametre conforming to Fe 410-0 or Fe 310-0 all as specified. | 736 | Kg | |
| 107 | 107 | Dismantling and disconnecting of existing CI soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories. | 99.2 | Rm | |
| 108 | 108 | Dismantling and disconnecting of existing CI soil vent pipe 75 mm bore fixed to wall,laid in trenches incl all fittings & accessories. | 34 | Rm | |
| 109 | 109 | S&F centrifugally cast hubless pipes of nominal size 100 mm dia with Shielded coupling (SS 304) with EPDM rubber gasket in any length laid in trenches or in floors. | 32 | Rm | |
| 110 | 110 | S&F centrifugally cast hubless pipes of nominal size 100 mm dia with Shielded coupling (SS 304) with EPDM rubber gasket in any length fixed to wall & incl fixing with clamps all as specified and directed by Engr-in-Charge.. | 48 | Rm | |
| 111 | 111 | Ditto all as per item No 110 above but except pipes. | 19.2 | Rm | |
| 112 | 112 | S&F centrifugally cast hubless pipes of nominal size 75 mm dia with Shielded coupling (SS 304) with EPDM rubber gasket in any length laid in trenches or in floors. | 32 | Rm | |
| 113 | 113 | S&F centrifugally cast hubless pipes of nominal size 75 mm dia with Shielded coupling (SS 304) with EPDM rubber gasket in any length fixed to wall & incl fixing with clamps all as specified and directed by Engr-in-Charge.. | 24 | Rm | |
| 114 | 114 | Ditto all as per item No 113 but except pipes. | 10 | Rm | |
| 115 | 115 | S & F centrifugally cast hubless WC connector long of nominal size of 100 mm with Shielded coupling (SS 304) with EPDM rubber gasket all as specified and directed by Engr-in-Charge. | 16 | Each | |
| 116 | 116 | S & F centrifugally cast hubless WC connector long of nominal size of 75 mm with Shielded coupling (SS 304) with EPDM rubber gasket all as specified and directed by Engr-in-Charge. | 16 | Each | |
| 117 | 117 | S & F centrifugally cast hubless door bend of nominal size of 100 mm with Shielded coupling (SS 304) with EPDM rubber gasket all as specified and directed by Engr-in-Charge. | 16 | Each | |
| 118 | 118 | S & F centrifugally cast hubless door bend of nominal size of 75 mm with Shielded coupling (SS 304) with EPDM rubber gasket all as specified and directed by Engr-in-Charge. | 16 | Each | |
| 119 | 119 | S & F centrifugally cast hubless sweep door tee nominal size of 100 mm with Shielded coupling (SS 304) with EPDM rubber gasket all as specified and directed by Engr-in-Charge. | 16 | Each | |
| 120 | 120 | S&F 100 mm CI connection socket to fit out let of WC | 16 | Each | |
| 121 | 121 | S & F centrifugally cast hubless deep seal floor trap of nominal size of 75 mm with Shielded coupling (SS 304) with EPDM rubber gasket & fixed in cement concrete type B1 (1:2:4) all as spd and directed all as specified and directed by Engr-in-Charge. | 32 | Each | |
| 122 | 122 | M & L for precast cement concrete slab in cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregates set and jointed in CM 1:4 complete all as specified and directed. | 2 | Cum | |
| 123 | 123 | S & F mild steel TMT bars 6 to 8mm mm dia cut to length, bent to shape required, including cranking, bending spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engineer-in charge. | 160 | Kg | |
| 124 | 124 | M & L rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc ., conferming to Fe-410 W (Gde E-250) and fastening and fixing complete. | 50 | Kg | |
| 125 | 125 | Taking down u/s perished point wiring for light/fan /socket/power with all fittings and fixtures, tube lights complete including making good the distrubed surfaces complete all as specified and as directed. | 497 | Per Point | |
| 126 | 126 | M&l point wiring with PVC insulated (FRLS) unsheathed copper stranded conductor single core cable of 1.5 Sqmm size drawn through PVC casing caping fixed on walls/ceilings with PVC terminal box fixed on wall with 3mm thick plastic laminated sheet cover for fixing switch/sockets/regulators etc complete with 1.5 Sqmm PVC insulated copper conductor single core cable as earth continuity conductor connected to common earth dolly for one light point controlled by one switch. | 240 | Per Point | |
| 127 | 127 | Ditto all as per item Sr No 126 above but for one ceiling fan/exhaust fan point controlled by one switch. | 91 | Per Point | |
| 128 | 128 | Ditto all as per item Sr No 126 above but for one 5 Amps socket point controlled by switch on the same board with other switches. | 76 | Per Point | |
| 129 | 129 | Ditto all as per item Sr No 126 above but for one 5 Amps socket point on independent board. | 74 | Per Point | |
| 130 | 130 | Ditto all as per item Sr No 126 above but for one bell point controlled by one bell push. | 16 | Per Point | |
| 131 | 131 | M&l point wiring with PVC insulated (FRLS) unsheathed copper stranded conductor single core cable of 2.5 Sqmm size drawn through PVC casing caping fixed on walls/ceilings with PVC terminal box fixed on wall with 3mm thick plastic laminated sheet cover for fixing switch/sockets/regulators etc complete with 2.5 Sqmm PVC insulated copper conductor single core cable as earth continuity conductor for one 15 Amps socket outlet on indepent board. | 46 | Per Point | |
| 132 | 132 | S&f in repairs switch 5 Amps piano flush type single pole one way. | 407 | Each | |
| 133 | 133 | S&F in repairs Bell push, flush type single pole one way, 5 Amps, 240 Volts AC. | 16 | Each | |
| 134 | 134 | S&f in repairs switch socket combination flush type 5 Amps, 2/3 pin multipurpose. | 74 | Each | |
| 135 | 135 | S&f in repairs switch socket combination flush type 5/15 Amps 3/3 pin universal multipurpose. | 46 | Each | |
| 136 | 136 | S&f in repairs socket outlet flush type 2/3 pin 5 Amps. | 76 | Each | |
| 137 | 137 | S&f in repairs ceiling rose surface bakelite 65x50mm three terminal. | 300 | Each | |
| 138 | 138 | S&f in repairs stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc as required. | 91 | Each | |
| 139 | 139 | S&f in repairs electronic door bell Ding Dong, AC 230 volts, single pole. | 16 | Each | |
| 140 | 140 | S&f in repairs lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. | 52 | Each | |
| 141 | 141 | S&f in repairs LED T5 light fitting (four feet) 20/22 Watt (Lumen output 2000lm colour temperature cool daylight (6500-7500K) input voltage 90-300V AC 50 Hz, surge protection >2.5KV, driver efficiency >85% and CRI more than 80) decorative ultra slim LED batten fixture with aluminium extruded heat shrink environmental friendly energy efficient complete with all accessories prewired and including connecting up with three flexible copper conductor cable with suitable size complete. | 164 | Each | |
| 142 | 142 | S&f in repairs LED, two feet, white LED light fitting 9/10 Watt (Lumen output 900lm colour temperature cool daylight (6500-7500K) input voltage 90-300V AC 50 Hz, surge protection >2.5KV, driver efficiency >85% and CRI more than 80) ultra slim along with linear LED Tube lighting fixture with aluminium extruded heat shrink environmental friendly energy efficient complete with all accessories prewired and including connecting up with three flexible copper conductor cable with suitable size complete. | 24 | Each | |
| 143 | 143 | Taking down unserviceable submain wiring with any size aluminium cable from existing concealed conduit/surface conduit/PVC casing caping including MS conduit/PVC conduit/PVC casing caping and making good the disturbed surfaces all as directed. | 315 | Rm | |
| 144 | 144 | M&l for submain wiring with 2 runs of 4 Sqmm single core PVC insulated (FRLS) stranded copper conductor cable drawn through casing and caping with one run of 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed . \nNote:2 runs of 4 Sqmm PVC insulated unsheathed copper conductor and 1 run of 2.5 Sqmm PVC insulated unsheathed copper conductor and 1 run of casing and caping will be measured as single run. | 315 | Rm | |
| 145 | 145 | Taking down unserviceable main switch/DB/MCBs incl disconnecting from mains and making good the disturbed surfaces. | 23 | Each | |
| 146 | 146 | S&f sheet metal enclosures for fixing MCBs single pole and neutral 8 way, 240 Volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directed. | 19 | Each | |
| 147 | 147 | S&f sheet metal enclosures for fixing MCBs TPN 4 way, 415 Volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering comple | 4 | Each | |
| 148 | 148 | S&f MCBs TPN, 240 Volts 63 Amps | 4 | Each Set | |
| 149 | 149 | S&f MCBs single pole and neutral, 240 Volts 6 to 32 Amps. | 19 | Each | |
| 150 | 150 | S&f MCB single pole, 240 volts 6 to 30 Amps capacity. | 120 | Each | |
| 151 | 151 | M&l for earthing complete with 600x600x6mm thick GI earth plate electrode burried directly in ground not less than 2.25 mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL, connected to GI earth lead of 4mm dia by means of nuts, bolts, washers, checknuts etc, made out of galvanised iron or steel, earth wire protected by galvanised iron pipe, connected to main switch board complete including necessary earth work, excavation, PCC chamber, watering pipe, finnel, wiremesh, RCC chamber cover etc all as specified and directed in EP No 5 of SSR Part-I including dismantling of old earthing complete all as specified. | 6 | Each Job |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
