Installation Of Swings And Slides With Play Station In Park -Ii Opposite Gali No- 34 Vipin Garden Along The Drain In Uttam Nagar Assembly Constituency Ac-32
Tender Value
10.78 Lakhs
Estimated cost
Bid Submission
17 Dec 2019
0 days left
EMD
21577
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Uttam Nagar AC → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation of Swings and slides with play station in park -II opposite Gali No- 34 vipin garden along the drain in Uttam Nagar Assembly Constituency AC-32
BOQ
| Name of Work:- Installation of Swings and slides with play station in park -II opposite Gali No- 34 vipin garden along the drain in Uttam Nagar Assembly Constituency AC-32 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supply & Fixing of Multiplay System HPS-MPS-506: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge Upright structural posts of height 2.3 m, 2.6 mand 3.2 m are to be schedule Galvanized steel with a 114 mm OD. All the posts are to be finished with a baked on powder coat finish. Powder coatings used TGIC Polyester powder. Electro -statically applied polyester powder musthave a tough finish with maximum durability. The pre treatment and curing process includes Acid wash > freshwater rinse > iron phosphate rinse > final rinse > rust prevention treatment >seal & dry-off > oven baked electro-static powder application and dual zone curing in the oven > QC Controls > Final finish. Finished products have the following typical characteristics: 0.5mm thickness, oven cured between 191oCand 220oC, to achieve Flexibility, Impact, Salt Spray {Corrosion} Resistance, Hardness, and Adhesion. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Deck of size 1.16 mx 1.16 m and Staircase of size 1.0 m x 0.60m shall be an all-PATENT welded assembly fabricated from perforated solid punched steel. Handrail of height 1.88m and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish. Snake Climber, Piped walls of size 2.14 m shall be an all patent welded fabricated from 32 O.D. galvanized steel pipes for the outer pipes and 25 mm O.D. galvanized steel for the inner parallel bars with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304. Roof of size 1.47 m x 1.47 m x 0.96 m, WaveySlide of size 2.38m x 0.55m x 1.20m, Panels, Plastic Components [super thick plastic] shall be rotationally molded from antistatic, copolymer, virgin linear low density UV stabilized polyethylene, with “color molded” in not “added in”. Top rails Of Monkey Bar of size 2.32m x 1.0mand Swing of size 2.55 m x 1.16m shall be fabricated from 32mm O.D. galvanized steel pipe with a baked on powder coating finish. Finished products have the following typical characteristics: 0.5mm thickness, oven cured between 191oC and 220oC, flexibility, Impact, Salt Spray resistance, Hardness, and Adhesion. Play Equipment Dimensions : 7.44 m x 4.03 m x 3.81 m | 1 | Each | |
| 2 | 2 | Supply and fixing of 1.8 MTR Wave Slide HPS-SAL-747: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. “A” shaped support posts of height 2.28 m, are to be schedule Galvanized steel with a 60mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish. Powder coatings used TGIC Polyester powder. Electro - statically applied polyester powder must have a tough finish with maximum durability. Deck of size 0.80 m x 0.60 m and Staircase of size 1.84 m x 0.60 m shall be an all-PATENT welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm [optional].Handrail of height 1.9 m and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with ultra violet stabilized plastic safety caps as a safety feature against protruding hardware, aesthetic pleasing against ugly exposed hardware and prevention against vandalism as well.Wavey Slide of size 2.95 m x 0.72 m x 1.72 m, Panels, Plastic Components [super thick plastic] shall be rotationally molded from antistatic, copolymer.ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS.PLAY EQUIPMENT DIMENSIONS: Size: L x W x H 4.18 m x 0.89 m x 2.28 m. | 1 | Each | |
| 3 | 3 | Supply and Fixing of Merry Go Round HPS-SAL-748: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. The platform Dia.1.21m, of thickness 2mm and width of 60 mm, with solid precision punched holes and reinforcement rib. After shot blasting, oil and phosphate removal, Zinc Primer Paint is applied at all the welding points using Zinc powder (Interpon PZ660) and Powder coated using Akzo Nobel powder coating.The handrails is made from Dia. 50 mm galvanized steel tubes and wall thickness of 2mm as per GB / T 700-1988. The welding used is CO2 shielded arc welding (meets with the requirement of BS1387-1985, and the technology used meets the requirement of the BS1387-1985) and welding is done by robotic welding. The Centre rod for the merry go round is made from 98mm dia, galvanized steel post and connected on to a 160mm dia pipe which is connected to the base plate at the bottom for fixing the foundation. The concealed bearings of grade 6213 and 32213 which conforms to GB-T308-2002 is used to ensure smooth movement of the equipment. The centre rod is connected to the 1.3m dia platform througha base plate of 250mm dia using M16 stainless steel anti theft screws. The installation requires the poles to be fitted using Anchor fasteners on a concrete foundation of minimum strength M-25, cement concrete blocks of required size,as per direction given by engineer incharge, finished below ground level. | 1 | Each | |
| 4 | 4 | Supply and fixing of N Swing HPS-SAL-730: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. Inverted “U” Shaped support posts of height 2.1 m are to be schedule Galvanized steel with a 80mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Toprail of length 2.5 m and Dia 89 mm shall be an all-patent welded unit, fabricated from O.D. galvanized steel pipes with a baked on powder coating finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Flat Swings seat of size 430 mm x 180 mm x 50 mm, Plastic Components.ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. Size: (L x W x H )2.6 m x 1.26 m x 2.1 m | 1 | Each | |
| 5 | 5 | Supply and fixing of A Swing HPS-SAL-729:Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. “A” Shaped support posts of height 2.0 m are to be schedule Galvanized steel with a 80mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish.Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Toprail of length 2.6 m and Dia 60 mm shall be an all-patent welded unit, fabricated from O.D. galvanized steel pipes with a baked on powder coating finish.Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Flat Swing seat of size 440 mm x 153 mm x 30 mm, Plastic Components.ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. Size: (L x W x H )2.75 m x 1.53 m x 2.0 m | 1 | Each | |
| 6 | 6 | Supply and fixing of Animal Merry Go Round HPS-SAL-718: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. The Centre post of height 815 mm are to be schedule Galvanized steel with a 48mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish.Handrail of size 815 mm x 474 mm and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish..Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Round Deck of Dia 1.21 shall be an all-PATENT welded assembly fabricated from perforated solid punched steel. ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. Size: Dia – 1.2 Mtr | 1 | Each | |
| 7 | 7 | Supply and fixing of 4 Seater See saw HPS-SAL-704: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia 114 mm. It consists of 4 seats which is made of LLDPE virgin plastic of size 364 mm X 250 mm X 180 mm.Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. Size:( L x W x H ) 2.60 m x 0.5 m x 0.7 m | 1 | Each | |
| 8 | 8 | Supply and fixing of 2 Seater See saw HPS-SAL-706: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 1614 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 363 mm X 250 mm X 155 mm.Each seat consists of a safety stand in the horizontal balance bar which is of 500 mm X 462 mm and a thickness of Dia 32 mm. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. Size:( L x W x H 1.91 m x 0.5 m x 0.82 m | 1 | Each | |
| 9 | 9 | Supply and Fixing of Monkey Bar HPS-SAL-711: Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. Support posts of height 2.1 m are to be schedule Galvanized steel with a 89 mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish. Specialized connectors such as clamps and couplings are to be cast from aluminum which is pretreated, and cured, with a baked on powder coat finish..Handrail of size 0.94 m and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. .ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS. Size:( L x W x H)2.91 m x 1.11 m x 2.2 m. | 1 | Each | |
| 10 | 10 | Supply and fixing of 1.5 MTR Wave Slide HPS-SAL-746:Arihant / Koochie / Hugo / Kompon/ Landscape Structure / Grandslam Fitness or any other make as per approved by engineer in charge. “A” shaped support posts of height 2.28 m, are to be schedule Galvanized steel with a 60mm OD {Outer Diameter}.All the posts are to be finished with a baked on powder coat finish. Powder coatings used TGIC Polyester powder. Electro - statically applied polyester powder must have a tough finish with maximum durability. Deck of size 0.80 m x 0.60 m and Staircase of size 1.84 m x 0.60 m shall be an all-PATENT welded assembly fabricated from perforated solid punched steel. Deck perimeter is precision pre punched for attachments. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm [optional].Handrail of height 1.9 m and Dia 32 mm shall be an all-patent welded unit, fabricated from 32 O.D. galvanized steel pipes with a baked on powder coating finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Exposed hardware shall be covered with ultra violet stabilized plastic safety caps as a safety feature against protruding hardware, aesthetic pleasing against ugly exposed hardware and prevention against vandalism as well. Wavey Slide of size 2.95 m x 0.72 m x 1.72 m, Panels, Plastic Components [super thick plastic] shall be rotationally molded from antistatic, copolymer. ALL WELDING IS CARRIED OUT BY ROBOTS [SIMMILIAR TO THE ONES USED IN THE AUTOMOBILE INDUSTRY], WHICH GUARANTEES STRONG AND SMOOTH WELDS ELIMINATING ANY RAG, WELD SCARS AND ENSURES THE INTEGRITY AND STRENGTH OF THE WELDED AREAS.PLAY EQUIPMENT DIMENSIONS:SIZE(L x W x H) 4.18 m x 0.89 m x 2.28 m. | 1 | Each |
AI Tender Summary
Tender Timeline
Dec 04, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 17, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender