| 1 | 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. \n(a) Depth of excavation not exceeding 1,500 mm. | BI01010001010000000000000515BI0100001125 | 22.845 | %cu.m. |
|---|
| 2 | 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. | BI01010001010000000000000515BI0100001126 | 231.57 | sq.m. |
|---|
| 3 | 3 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation.\n(a) 1:3:6 proportion | BI01010001010000000000000515BI0100001127 | 3.813 | cu.m. |
|---|
| 4 | 4 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes\n(i) Pakur Variety | BI01010001010000000000000515BI0100001128 | 28.5 | cu.m. |
|---|
| 5 | 5 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. | BI01010001010000000000000515BI0100001129 | 61.38 | sq.m. |
|---|
| 6 | 6 | Brick work with 1st class bricks in cement mortar (1:4).\n(a) In foundation and plinth | BI01010001010000000000000515BI0100001130 | 5.115 | cu.m. |
|---|
| 7 | 7 | Supplying &laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. \n(b) 50 mm thick interlocking designer concrete paver block M30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 156582006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.)\n(ii) Coloured Decorative | BI01010001010000000000000515BI0100001131 | 193.44 | sq.m. |
|---|
| 8 | 8 | Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) | BI01010001010000000000000515BI0100001132 | 34.1 | Mtr. |
|---|
| 9 | 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]\n(ii) With 1:4 cement mortar\n(a) 20 mm thick plaster | BI01010001010000000000000515BI0100001133 | 172.21 | sq.m. |
|---|
| 10 | 10 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: (a) One Coat | BI01010001010000000000000515BI0100001134 | 172.21 | %sq.m. |
|---|
| 11 | 11 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion | BI01010001010000000000000515BI0100001135 | 172.21 | sq.m. |
|---|
| 12 | 12 | 18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]\n | BI01010001010000000000000515BI0100001136 | 80.68 | sq.m. |
|---|
| 13 | 13 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).\n(A) In 10-12 Micron thickness Annodizing film\nI) Natural white\na) 2- track sliding window\ni) Bottom frame | BI01010001010000000000000515BI0100001137 | 2.3 | Mtr. |
|---|
| 14 | 14 | ii) Top and side frame. | BI01010001010000000000000515BI0100001138 | 4.5 | Mtr. |
|---|
| 15 | 15 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. i) 4mm thick clear glass. | BI01010001010000000000000515BI0100001139 | 4.6 | sq.m. |
|---|
| 16 | 16 | Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units:(A) Glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or EPDM gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and Polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / EPDM gasket, locking arrangement and rollers. i ) 2 track sliding window. | BI01010001010000000000000515BI0100001140 | 1.6 | sq.m. |
|---|
| 17 | 17 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.\ni) For sliding windows\na) ' T' shaped EPDM gasket for frames. | BI01010001010000000000000515BI0100001141 | 9 | Mtr. |
|---|
| 18 | 18.1 | b) 'U' shaped EPDM gasket for frames. | BI01010001010000000000000515BI0100001142 | 9 | Mtr. |
|---|
| 19 | 18.2 | Supplying PVC rollers for sliding windows as per direction of Engineer in charge. | BI01010001010000000000000515BI0100001143 | 8 | each |
|---|
| 20 | 19 | Supplying maruti lock (100mm) | BI01010001010000000000000515BI0100001144 | 4 | Pair |
|---|
| 21 | 20.1 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. \n(ii) Grill weighing above 16 Kg./sq.mtr and above. | BI01010001010000000000000515BI0100001145 | 2.79 | Qntl. |
|---|
| 22 | 20.2 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete including cutting to requisite size, fabrication with necessary metal arc welding conforming to IS: 8161969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour reqired for the work including all incidental chages such as electricity charges, labour insurance charges etc. \nPayment to be made on the basis of calculated weight of structural tubular memebrs as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a height of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.\ni) For trusses spanning up to 12.00 m | BI01010001010000000000000515BI0100001146 | 0.086 | MT. |
|---|
| 23 | 21 | Supplying fitting and fixing steel rolling grills link type, shutter with 18 B.G .of approved type steel to the section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.\n | BI01010001010000000000000515BI0100001147 | 40 | sq.m. |
|---|
| 24 | 22 | M.S. gate of Jail type as per approved design made of strong M.S. frame work, intermediate stiffeners and round / square bars or angles. M.S. sheet (not less than 14 gauge) gussets, cleats etc. including necessary riveting, bolting, welding, locking and hanging arrangements, fitting and fixing complete as per direction of the Engineer-in -charge.\nIn ground floor. | BI01010001010000000000000515BI0100001148 | 4.8 | Qntl. |
|---|
| 25 | 23 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc | BI01010001010000000000000515BI0100001149 | 12 | sq.m. |
|---|
| 26 | 24 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :\n(b) On steel or other metal surface : With super gloss (hi-gloss)\n(iv) Two coats (with any shade except white) | BI01010001010000000000000515BI0100001150 | 12 | sq.m. |
|---|
