Repair And Maintenance Of Food Court -Part B Electrification Electrical Works
Tender Value
8.60 Lakhs
Estimated cost
Bid Submission
11 Dec 2019
0 days left
EMD
21520
Bank guarantee accepted
Document Fee
2080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
VYTTILA MOBILITY HUB → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair And Maintenance Of Food Court -Part B Electrification Electrical Works
BOQ
| Name of Work:REPAIR AND MAINTENANCE OF FOODCOURT-PARTB- ELECTRIFICATION | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 0 | Laying and Jointing PVC Pipe. Heading | BI01010001010000000000000515BI0100001112 | ||
| 2 | 1 | Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC insulated stranded single core copper conductor cable 650V grade,including providing Switch Board main and continuous earthing with No. 14 SWG copper, required qty of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white or off white) etc. up to and including 6 A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. Single control light point with 6A, 3 plate ceiling rose | BI01010001010000000000000515BI0100001113 | 17 | pts |
| 3 | 2 | - Do - Single control light point without ceiling rose | BI01010001010000000000000515BI0100001114 | 6 | pts |
| 4 | 3 | - Do - Single control ceiling fan point without ceiling rose & with socket size stepped electronic regulator. | BI01010001010000000000000515BI0100001115 | 1 | pts |
| 5 | 4 | - Do -Call bell point with piano type 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end | BI01010001010000000000000515BI0100001116 | 2 | pts |
| 6 | 5 | - Do - Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. | BI01010001010000000000000515BI0100001117 | 2 | pts |
| 7 | 6 | - Do- Independent plug | BI01010001010000000000000515BI0100001118 | 1 | pts |
| 8 | 7 | Supply, conveyance, installation, testing and commissioning of pre-wired light fitting made from 0.5mmCRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. suitable 'C/U' brackets to suit the fitting and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required. LED 20W LED light fittings | BI01010001010000000000000515BI0100001119 | 8 | nos |
| 9 | 8 | SITC Street light fitting with 36W LED Streetlight with Luminiare efficeincy >105 lm/W rugged aluminium alloy housing with all accessories complete ( LUKER make 36 W 6500K, Lumen/watt >105 Cat. NoLST36 or equivalent ) on existing pipe and giving connection with 24/0.20mm 3 core flex wire as required.. | BI01010001010000000000000515BI0100001120 | 1 | no |
| 10 | 9 | Supply, conveyance, installation, testing and commissioning of pre-wired light fitting Suspended and surface mounted aluminium extruded Linear LED Luminair with superior anodised aluminium finish including suspension arrangments , 35 W, 3850 Lumen Luxpower Linear , 4 ft , warm light ,direct light emission, 100% downward direction THD less than 10% ,Luminiare efficeincy 100 - 115 lm/W Osram make LUXPOWER LINEAR 35W 830 L12 4x1 or equvalent make and giving connections. | BI01010001010000000000000515BI0100001121 | 55 | nos |
| 11 | 10 | Supply and fixing angle / straight brass lined skirt type, bakelite batten holder without shade and giving connection etc as required | BI01010001010000000000000515BI0100001122 | 6 | nos |
| 12 | 11 | Supply and providing the following types and power rated lamps in the existing fittings as required 9W LED Bulb in the existing fittings | BI01010001010000000000000515BI0100001123 | 6 | nos |
| 13 | 12 | Supply and installation of suitable size MS rod type fan clamp as per IS 732 as required. | BI01010001010000000000000515BI0100001124 | 24 | nos |
| 14 | 13 | Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required.1200 mm sweep (Category B) - 5 Star rated | BI01010001010000000000000515BI0100001125 | 40 | nos |
| 15 | 14 | Charges for cutting holes suitable for accommodating exhaust fans of sizes up to 305 mm sweep including plastering, colour washing etc. as required. Incuding suitable self operated louver and bird guard etc. | BI01010001010000000000000515BI0100001126 | 18 | nos |
| 16 | 15 | Charges for cutting holes suitable for accommodating exhaust fans of sizes exceeding 305 mm sweep up to 450 mm including plastering, colour washing etc. as required.Incuding suitable self operated louver and bird guard etc. | BI01010001010000000000000515BI0100001127 | 2 | nos |
| 17 | 16 | Supply, conveyance, installation, testing and commissioning of the following sizes of exhaust fans in the existing opening, fixing necessary bolt and nuts, making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 200 mm, single phase, light duty exhaust fan in plastic body | BI01010001010000000000000515BI0100001128 | 2 | nos |
| 18 | 17 | 305 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame | BI01010001010000000000000515BI0100001129 | 16 | nos |
| 19 | 18 | 380 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal frame | BI01010001010000000000000515BI0100001130 | 2 | nos |
| 20 | 19 | Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Call Bell. | BI01010001010000000000000515BI0100001131 | 1 | nos |
| 21 | 20 | -Do - Ding Dong bell | BI01010001010000000000000515BI0100001132 | 1 | nos |
| 22 | 21 | Supplying and fixing the following sizes of M.S. Boxes made out of 1.60 mm thick sheet painted grey (both inside and outside ) in surface/ recess including phenolic laminated sheet covers of thicknesses noted along with screwed to the box as front cover with steel screws, cup washers etc. making good the surface, painting /colour washing etc. as required. 100 mm x 150 mm x 50mm with 3 mm sheet | BI01010001010000000000000515BI0100001133 | 2 | nos |
| 23 | 22 | Supply & Fixing the following types/ sizes of boxes suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required ( RoHS)3 module metal box in recess | BI01010001010000000000000515BI0100001134 | 8 | nos |
| 24 | 23 | -do - 8 module metal box in recess | BI01010001010000000000000515BI0100001135 | 2 | nos |
| 25 | 24 | Supply & Fixing the following types/ sizes of front plates on the existing modular boxes. (RoHS)3 module white/ off-white | BI01010001010000000000000515BI0100001136 | 8 | nos |
| 26 | 25 | - do - 8 module white/ off-white | BI01010001010000000000000515BI0100001137 | 2 | nos |
| 27 | 26 | Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)6 A SP 1 way switch | BI01010001010000000000000515BI0100001138 | 4 | nos |
| 28 | 27 | -do - 16 A SP 1 way switch | BI01010001010000000000000515BI0100001139 | 8 | nos |
| 29 | 28 | - do - 6 A Universal socket | BI01010001010000000000000515BI0100001140 | 6 | nos |
| 30 | 29 | - do - 6 / 16 A combined socket | BI01010001010000000000000515BI0100001141 | 8 | nos |
| 31 | 30 | - do - 6 A 3 plate ceiling rose | BI01010001010000000000000515BI0100001142 | 55 | nos |
| 32 | 31 | Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.20 mm dia light gauge /equvalent PVC Caping and casing 25x12 or 25x16mm. | BI01010001010000000000000515BI0100001143 | 600 | mts |
| 33 | 32 | - do - 25 mm dia light gauge /equvalent PVC Caping and casing 32x12 or 32x16mm. | BI01010001010000000000000515BI0100001144 | 120 | mts |
| 34 | 33 | - do - 32mm dia light gauge /equvalent PVC Caping and casing 50x20 or 38x20 mm . | BI01010001010000000000000515BI0100001145 | 90 | mts |
| 35 | 34 | Supply and fixing the following sizes of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories in recess including cutting the wall and making good the damages etc as required.20mm . | BI01010001010000000000000515BI0100001146 | 60 | mts |
| 36 | 35 | Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.1.50 sq mm 1 run | BI01010001010000000000000515BI0100001147 | 250 | mts |
| 37 | 36 | 1.50 sq mm 2 run | BI01010001010000000000000515BI0100001148 | 80 | mts |
| 38 | 37 | 1.50 sq mm 3 run | BI01010001010000000000000515BI0100001149 | 300 | mts |
| 39 | 38 | 1.50 sq mm 6 run | BI01010001010000000000000515BI0100001150 | 90 | mts |
| 40 | 39 | 2.50 sq mm 2 run | BI01010001010000000000000515BI0100001151 | 250 | mts |
| 41 | 40 | 2.50 sq mm 4 run | BI01010001010000000000000515BI0100001152 | 90 | mts |
| 42 | 41 | 2.50 sq mm 6 run | BI01010001010000000000000515BI0100001153 | 90 | mts |
| 43 | 42 | 4.00 sq mm 2 run | BI01010001010000000000000515BI0100001154 | 50 | mts |
| 44 | 43 | 6.00 sq mm 4 run | BI01010001010000000000000515BI0100001155 | 8 | mts |
| 45 | 44 | 25.00 sq mm 4run | BI01010001010000000000000515BI0100001156 | 8 | mts |
| 46 | 45 | Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required 8 way single phase double cover (IP 42/43) | BI01010001010000000000000515BI0100001157 | 1 | nos |
| 47 | 46 | - do - 6 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) | BI01010001010000000000000515BI0100001158 | 1 | nos |
| 48 | 47 | -do- FP enclosure for independent mounting of MCB | BI01010001010000000000000515BI0100001159 | 9 | nos |
| 49 | 48 | Supply and installation of the following accessories suitable for 50 Hz AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required 40 A double pole mini break isolator | BI01010001010000000000000515BI0100001160 | 7 | nos |
| 50 | 49 | 40 A four pole mini break isolator | BI01010001010000000000000515BI0100001161 | 2 | nos |
| 51 | 50 | 63 A four pole mini break isolator | BI01010001010000000000000515BI0100001162 | 3 | nos |
| 52 | 51 | 63 A, 4 pole, 100 mA RCCB | BI01010001010000000000000515BI0100001163 | 2 | nos |
| 53 | 52 | 40A, 4 pole, 30 mA RCCB | BI01010001010000000000000515BI0100001164 | 2 | nos |
| 54 | 53 | 25 A, 4 pole, 30 mA RCCB | BI01010001010000000000000515BI0100001165 | 1 | nos |
| 55 | 54 | - do - 6 A to 32 A, 10 kA, SP MCB (C curve) | BI01010001010000000000000515BI0100001166 | 88 | nos |
| 56 | 55 | - do - 6 A to 25 A, 10 kA, TP MCB (C curve) | BI01010001010000000000000515BI0100001167 | 4 | nos |
| 57 | 56 | 40 A, 10 kA, TP MCB (C curve) | BI01010001010000000000000515BI0100001168 | 2 | nos |
| 58 | 57 | 63 A, 10 kA, TP MCB (C curve) | BI01010001010000000000000515BI0100001169 | 2 | nos |
| 59 | 58 | 25 A, 10 kA, TP MCB (C curve) | BI01010001010000000000000515BI0100001170 | 12 | nos |
| 60 | 59 | 6 A to 25 A, 10 kA, 4 pole MCB (C curve) | BI01010001010000000000000515BI0100001171 | 9 | nos |
| 61 | 60 | 125A, 25/35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL | BI01010001010000000000000515BI0100001172 | 1 | nos |
| 62 | 61 | Supply and providing plate earthing as per IS 3043 with 600x600x6.3 mm GI/CI earth plate, 20 mm GI watering pipe fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel with weld mesh, filling required quantity of charcoal including construction of inspection chamber with a bed concrete of 1:4:8 PCC using 40 mm broken stone (10 cm thick), brick work in cement mortar 1:6, plastering the surface of brick masonry and the exposed surface of PCC bed with cement mortar 1:4, 12 mm thick, (the finished inside dimension shall be 300 x 300 x 300 mm) but excluding test joint, earth continuity conductor to the plate, and covering at the top. (in ordinary soil) | BI01010001010000000000000515BI0100001173 | 2 | nos |
| 63 | 62 | Supply and providing the following sizes of cast iron gully trap with covering at the top of the inspection chamber of earth pit as required 300 x 300 x 6 mm cast iron gully trap with covering | BI01010001010000000000000515BI0100001174 | 2 | nos |
| 64 | 63 | Supply and providing test joint for the earthing system using 2 Nos of the following sizes of strips including cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required.2 x 25 x 3 mm GI strip | BI01010001010000000000000515BI0100001175 | 0.5 | mtr |
| 65 | 64 | Supply and providing earth lead from the test joint to the earth electrode using the following sizes of conductors/ strips including cutting, drilling necessary holes (in case of strip) and fixing firmly with plate test joint etc as required.25 x 3 mm GI strip | BI01010001010000000000000515BI0100001176 | 8 | mtr |
| 66 | 65 | Supply and laying the following sizes of bare copper laid 0.60 m below ground level including excavating trench of suitable size and refilling etc. as required (in ordinary soil)4.0 mm copper conductor (8 SWG) | BI01010001010000000000000515BI0100001177 | 20 | mtr |
| 67 | 66 | Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required.2.00 mm copper conductor (14 SWG) | BI01010001010000000000000515BI0100001178 | 100 | mtr |
| 68 | 67 | - do - 3.15mm copper conductor (10 SWG) | BI01010001010000000000000515BI0100001179 | 60 | mtr |
| 69 | 68 | 4.00 mm copper conductor (8 SWG) | BI01010001010000000000000515BI0100001180 | 100 | mtr |
| 70 | 69 | supply of superior quality copper earth socket for the following sizes of earth conductor including crimping etc. as required.2.00 mm (14 SWG) | BI01010001010000000000000515BI0100001181 | 150 | nos |
| 71 | 70 | - do - 3.15mm (10SWG) | BI01010001010000000000000515BI0100001182 | 50 | nos |
| 72 | 71 | 4.00 mm (8 SWG) | BI01010001010000000000000515BI0100001183 | 16 | nos |
| 73 | 72 | Supply and clamping25 x 3 mm copper strip tinned at the points of contacts ton surface of wall/ parapet/ existing cable tray using clamps fabricated from 20 x 3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1m, making good the damages, colour washing etc. as required | BI01010001010000000000000515BI0100001184 | 1 | mtr |
| 74 | 73 | Supply and providing the following sizes of bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required . 12 x 3mm brass bolt & nut | BI01010001010000000000000515BI0100001185 | 75 | nos |
| 75 | 74 | do - 25 x 6mm brass bolt & nut | BI01010001010000000000000515BI0100001186 | 32 | No |
| 76 | 75 | Supplying , threading , laying and jointing of the following sizes of 'B' class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads./UG cables 15mm dia | BI01010001010000000000000515BI0100001187 | 10 | mtr |
| 77 | 76 | Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16core sq mm with factory made clamp | BI01010001010000000000000515BI0100001188 | 35 | mtr |
| 78 | 77 | - do - 4 core 10 sq mm with factory made clamp | BI01010001010000000000000515BI0100001189 | 30 | mtr |
| 79 | 78 | Supplying siemens / tropodur type nickel plated single compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3½/ 4 core cable of the following sizes as required.16 sq mm | BI01010001010000000000000515BI0100001190 | 2 | no |
| 80 | 79 | - do - 10 sq mm | BI01010001010000000000000515BI0100001191 | 2 | nos |
| 81 | 80 | Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the following sizes of cables as required.4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip | BI01010001010000000000000515BI0100001192 | 4 | nos |
| 82 | 81 | Supply of superior quality aluminium tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.16 sq mm | BI01010001010000000000000515BI0100001193 | 8 | no |
| 83 | 82 | 10sq mm | BI01010001010000000000000515BI0100001194 | 8 | no |
| 84 | 83 | Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.25 sq mm | BI01010001010000000000000515BI0100001195 | 16 | no |
| 85 | 84 | 6sq mm | BI01010001010000000000000515BI0100001196 | 16 | nos |
| 86 | 85 | Painting letters or figures of the following sizes with enamel paint as identification mark to SB, DB, panel board etc as required 2.50 cm, 4 cm or 5 cm height | BI01010001010000000000000515BI0100001197 | 100 | nos |
| 87 | 86 | Fabrication, supply, conveyance and fixing frame work made out of suitable size angle iron/ flat cut and welded to shape of suitable size painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes to mount the switch gear, fixed to wall using suitable size anchor bolts or grouted to wall, making good the damages, colour washing etc as required | BI01010001010000000000000515BI0100001198 | 15 | kg |
| 88 | 87 | Supplying and installation including all manner of supports/ suspenders, anchor bolts etc for cable trays made out of suitable size channel sections, slotted angles, flats, MS plates etc as required including painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required. | BI01010001010000000000000515BI0100001199 | 150 | kg |
| 89 | 88 | Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).32 mm dia with clamps made from 20 x 3 mm MS flat | BI01010001010000000000000515BI0100001200 | 2 | mtr |
| 90 | 89 | Supply and providing 2mm thick Elastomeric fire retardent insulating mat as per IS 15652/2006 to withstand 3.3 KV dielectric strength. | BI01010001010000000000000515BI0100001201 | 2 | m2 |
| 91 | 90 | Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required. | BI01010001010000000000000515BI0100001202 | 1 | no |
| 92 | 91 | Supply and providing First Aid Chart duly framed and placed in a conspicuous location for clear vision. | BI01010001010000000000000515BI0100001203 | 1 | no |
| 93 | 92 | Supply and providing 9 Litre capacity GI Fire Bucket painted in post office red with primer coat of red oxide and written with white paint 'FIRE' mounted on MS angle frame work/ wall bracket filled with fine sand, painting the bracket/ floor stand including making good the damages, colour washing etc. as required. | BI01010001010000000000000515BI0100001297 | 2 | no |
AI Tender Summary
Tender Timeline
Dec 04, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 13, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender