Sales : +91-777 804 8217
| NAME OF WORK : PROVISION OF CERTAIN WORKS SERVICES TO ENHANCE QUALITY OF LIFE IN AIRMEN BILLETS AND OTM ACCN AT AF STATION AMBALA UNDER GE AF AMBALA (Revised Revised BOQ) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding including backing, removing serviceable tiles to store and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item1 | 1770 | SQM |
| 2 | 2 | Dismantling of brick tiles or concrete tiles single layers on roof , cleaning and stacking the serviceable tiles for reuse, removal of unserviceable tiles and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item2 | 2500 | SQM |
| 3 | 3 | Demolition of mud phuska on roofs, any thickness including mud plastering,whether full thickness removed or only a part thereof and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item3 | 192 | CUM |
| 4 | 4 | Demolition of plain cement concrete,un-reinforced, in ground floor and paving not exceeding 15 cm thick below or above ground floor and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and directed. | item4 | 175 | CUM |
| 5 | 5 | Demolition of RCC, of any description and in any position inluding cutting of reinforcement to facilitate demolition and rubbish off the premises to a distance not exceeding 500 mtr complete all as specified and as directed. | item5 | 12 | Cum |
| 6 | 6 | Dismantling cast iron or reinforced cement concrete drain pipe, any dia, from any position, jointed in cement mortar, with & including taking down/out from trench if required complete all as specified and as directed. | item6 | 45 | RM |
| 7 | 7 | Dismantling of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and precast articles and rubbish off the premises to a distance not exceeding 500 mtr, including stacking of servicable bricks for reusing complete all as specified and as directed. | item7 | 34 | CUM |
| 8 | 8 | Taking down cement plaster on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance n.exc 500 mtr complete all as specified and directed. | item8 | 6700 | SQM |
| 9 | 9 | Taking down cement plaster on soffits of slabs/chajjas/sunshades etc including racking out joints, hacking for key, scrubbing down with water including removal of debries to distance n.exc 500 mtr complete all as specified and directed. | item9 | 4000 | SQM |
| 10 | 10 | Taking up or down steel water tubing and connections for refixing or removal from site for 15 mm bore pipe complete all as specified and directed. | item10 | 150 | RM |
| 11 | 11 | Taking up or down steel water tubing and connections for refixing or removal from site for 20 mm bore pipe complete all as specified and directed. | item11 | 100 | RM |
| 12 | 12 | Taking down chowkhats or frames n.exc 1.5 sqm each with shutters without taking off shutters from the frame and removing from site including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed | item12 | 228 | EACH |
| 13 | 13 | Taking down chowkhats or frames exc 1.5 but n.exc 4 sqm each with shutters without taking off shutters from the frame and removing from site including cutting holes for taking out hold fasts and making good disturbed portion in cement mortar 1:3, complete all as specified and as directed | item13 | 48 | EACH |
| 14 | 14 | Cutting holes brick walls built in cement mortar exceeding half brick thick wall but not exceeding one brick thick wall built in cement mortar for inserting hold fasts etc and making good the dismantled portion in plain cement concrete 1:2:4 type B1 & finished to match as per the existing finish complete all as specified and as directed. | item14 | 150 | EACH |
| 15 | 15 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels,cornices, skirtings, drip moulds 40 mm x 10 mm and similar work not exc 15 cm in width or girth , for RCC chajjas in cement mortar 1:4 with and including cutting to edges, all mitres and stopped ends,etc.complete all as specified and as directed | item15 | 40 | RM |
| 16 | 16 | Material and labour for 25mm thick PCC 1:2:4 type B1 using 20 mm graded mechanically crushed stone aggregates as in sub base complete all as specified and as directed. | item16 | 1700 | SQM |
| 17 | 17 | Material and labour for 75mm thick PCC 1:4:8, type D-2 using 40mm graded mechanically crushed stone aggregates as in sub base of floors complete all as specified and directed. | item17 | 1000 | SQM |
| 18 | 18 | Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded mechanically crushed stone aggregates as in roof kerbs ,benching etc rounded or moulded etc including weathering slightly rounded or chamfered angles of throating including form work complete all as specified and as directed.. | item18 | 18 | CUM |
| 19 | 19 | Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded mechanically crushed stone aggregate as in leaveling course of padding over roof slab to make good the depressions complete all as specified and as directed. | item19 | 120 | CUM |
| 20 | 20 | M&L for PCC 1:3:6, type C-1 using 20 mm graded mechanically crushed stone aggregates as in filling to chowkhats, window chajjas and hold fast block with & including necessary formwork complete all as specified and as directed. | item20 | 2 | CUM |
| 21 | 21 | Material and labour for RCC 1:2:4 type B-1,nominal mix using 20 mm graded mechanically crushed stone aggregates as in fins, fascia louvers, parapet and railing complete all as specified and as directed. | item21 | 12 | CUM |
| 22 | 22 | Material and labour for 75mm thick PCC 1:3:6 type C-1 using 20mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and as directed. \nNotes :- (i) The unit rate quoted shall be deemed to include for providing the concrete in alternate bays not exceeding 3 Mtrs length,12 mm wide.\n (ii) 50 mm deep joints between the bays shall be provided which shall be filled with mastic filling with hot bitumen 85/25 grade and 1:2 mix volume. | item22 | 450 | SQM |
| 23 | 23 | Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed. | item23 | 15 | CUM |
| 24 | 24 | Material and labour for Brick work straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 using old bricks retrieved from srl No 05 hereinbefore after cleaning and washing complete all as specified and as directed. | item24 | 5 | CUM |
| 25 | 25 | Material and labour for Brick work with sub class B bricks of old size, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and as directed. | item25 | 125 | SQM |
| 26 | 26 | Material and labour for providing water proofing roof treatment at any height/location as per latest zonal specification comprising of the following:-\n(a) Applying a coat of bitumen primer @ 0.30 ltrs per sqmts and allow to dry.\n(b) Applying APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick weighting not less than 3 kg per sqm , black finish reinforced with non-woven polyster matt weight not less than 150 gms per Sqm with thermo fusible finish laid by torch application \n(c) Plastering 15 mm in CM 1:4 using 100% course sand on roof with and including WPC @ 2% by weight of cement.\n(d) Providing 40 mm thick brick tiles laid and jointed in cement mortar 1:4, grouted flush in cement mortar 1:3 mixed with and including 5% of crude oil by weight of cement\n | item26 | 2500 | SQM |
| 27 | 27 | Material and labour for providing water proofing roof treatment at any height/location as per latest zonal specification comprising of the following:-\n(a) Applying a coat of bitumen primer @ 0.30 ltrs per sqmts and allow to dry.\n(b) Applying APP polymeric water proofing treatement to roof using membrane minimum 3 mm thick weighting not less than 3 kg per sqm , black finish reinforced with non-woven polyster matt weight not less than 150 gms per Sqm with thermo fusible finish laid by torch application \n(c) Plastering 15 mm in CM 1:4 using 100% course sand on roof with and including WPC @ 2% by weight of cement.\n(d) Providing 40 mm thick brick tiles using old tiles retrieved from Ser No 02 here-in-before after cleaning and washing laid and jointed in cement mortar 1:4, grouted flush in cement mortar 1:3 mixed with and including 5% of crude oil by weight of cement\nNotes for Ser No 26 & 27:-(i) The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators duly approved by GE in writing. (ii) 5% amount of the total amount of water proofing treatment shall be retained as a guarantee and shall be released after 10 years. However contractor may deposit the FDR of same amount in favour of GE. \n(iii) During the defect liability period if any defects noticed , same shall be rectified by the contractor without any extra cost. If contractor fail to rectify the defect pointed out , the same shall be got rectified at contractor' risk and cost and the recovery shall be made. | item27 | 500 | SQM |
| 28 | 28 | Material and labour for machine cut Kota stone slab/tiles 18-20 mm thick, minimum size 30cmx 45cm as in flooring, laid over and including screed bed 20 mm thick in cement mortar 1:6 set and jointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish complete all as specified and as directed.\n | item28 | 1000 | SQM |
| 29 | 29 | Material and labour for machine cut Kota stone slab/tiles 18-20 mm thick, on vertical surface as in skirting/dado or on platform/cooking slab/steps/pillars etc, laid over and including rendering 10 mm thick in cement mortar 1:4 set and jointed with grey cement slurry or with adhesive as per manufacturer's instructions mixed with pigment to match the shade of the slab including rubbing and granite polishing achieve mirror finish complete all as specified and as directed.\n | item29 | 150 | SQM |
| 30 | 30 | Material and labour for jointfree coloured, non- skid jointfree,edgecut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/ rectangular, area of each tile exceeding 0.06 but not exceeding 0.11 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed. | item30 | 70 | SQM |
| 31 | 31 | Material and labour for jointfree coloured, non- skid jointfree,edgecut, ceramic tiles,1st quality, 7 to 8 mm thick ,square/ rectangular, area of each tile exceeding 0.18 but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layers in Cement Mortar 1:4, complete all as specified and directed. | item31 | 1300 | SQM |
| 32 | 32 | Material and labour for joint free glazed designer ceramic coloured tiles of size 300x450x7-8 mm thick on vertical surface as in skirting/dado, set and jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 on brick / concrete walls complete all as specified and as directed. \nNotes for item No 28 to 32 :- (i) The rates includes for all straight cutting and waste including raking or circular cutting complete.\n (ii) All corners in wall tiling should be properly metred jointed to give monolithic uniform apprearance.\n (iii) The rates for tiling includes for laying to any pattern with one or more colour as directed.\n (iv) If tiles of different sizes are used then no price adjustment shall be made. | item32 | 400 | SQM |
| 33 | 33 | Material and labour for rendering 15 mm thick in CM 1:6 finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.\n | item33 | 3200 | SQM |
| 34 | 34 | Material and labour for rendering 15 mm thick in CM 1:4 mixed with WPC @ 2 % by weight of cement finished even and smooth without using extra cement on fair faces brick or concrete surfaces complete all as specified and directed.\nNote : WPC shall be measured and paid separately as supply only. | item34 | 3500 | SQM |
| 35 | 35 | Material and labour for rendering 5 mm thick in CM 1:4 on the soffits of slab/chajjas/sunshade etc finished even and smooth without using extra cement complete all as specified and directed.\n | item35 | 4000 | SQM |
| 36 | 36 | Supply only integral water proofing compound complete all as specified and as directed. | item36 | 322 | Kg |
| 37 | 37 | Material and labour for Roughening surface of old concrete floor by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3.0 Kg/Sqm complete all as specified and asa directed.\n | item37 | 2500 | SQM |
| 38 | 38 | Use and waste of form work to chajjas including edges, fins, facia and similar works for rough finished surfaces of concrete complete all as specified. | item38 | 240 | SQM |
| 39 | 39 | Supply and fixing factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part –II (2010) complete all as specified and directed. | item39 | 30 | RM |
| 40 | 40 | Supply and fixing factory made solid panels PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail, bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement fixed in the frame at site complete all as sepcified and as directed. | item40 | 16 | SQM |
| 41 | 41 | Supply and fixing 30mm thick flush shutter, factory made, solid core construction with block board and plywood face panel commercial type on both side complete all as specified and as directed. | item41 | 122 | SQM |
| 42 | 42 | Supply and fixing second class hard wood glazed and skeleton shutter 35mm thick, factory made, open rebated and prepared to receive glass/guage etc, without sash bars, mitred and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/guage etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(a) of SSR part-I(2009) complete all as specified and as directed. | item42 | 122 | SQM |
| 43 | 43 | Supply and fixing 18/19 mm thick block board, grade 2 quality, interior grade, commercial type , fixed with screws to frame work as in cup board shelves and shutters after taking down/out board as existing at site complete all as specified and as directed. | item43 | 12 | SQM |
| 44 | 44 | Supply and fixing second class hard wood small fittings such as brackets of any type, latch and hinges blocks, shaped doors and windows stops and the like, including all necessary labour, articles not exc 200 cucm each complete all as specified and as directed. | item44 | 168 | EACH |
| 45 | 45 | Supply and fixing for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or stainless steel wire staple complete all as specified and directed. | item45 | 140 | SQM |
| 46 | 46 | Supply and fixing for 3mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.50 sqm in each pane complete all as specified and directed. | item46 | 80 | SQM |
| 47 | 47 | Supply and fixing 4mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and directed. | item47 | 10 | SQM |
| 48 | 48 | Supply and fixing butt hinge, medium weight cold rolled mild steel 100 mm size welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed. | item48 | 288 | EACH |
| 49 | 49 | Supply and fixing butt hinge, medium weight cold rolled mild steel 75 mm size welded to angle iron frames or fixed with screws to wooden frames complete all as specified and as directed. | item49 | 168 | EACH |
| 50 | 50 | Supply and fixing Mild steel pressed handle, oval type, stove enamelled black 150 mm long, complete all as specified and as directed | item50 | 96 | EACH |
| 51 | 51 | Supply and fixing 200 mm long Mild steel barrel tower bolt , stove enamelled black with bright bolt complete all as specified and directed | item51 | 192 | EACH |
| 52 | 52 | Supply and fixing 150 mm long Mild steel barrel tower bolt , stove enamelled black with bright bolt complete all as specified and directed | item52 | 168 | EACH |
| 53 | 53 | Supply & fixing 150mm Mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed | item53 | 48 | EACH |
| 54 | 54 | Supply and fixing 300 mm long Mild steel sliding door bolt ,plate type,stove enamelled black with bright bolt not less than 12 mm dia with & including a minimum of 6 bolts and nuts ,four on bolt plate & two on staple plate complete all as specified and as directed. | item54 | 48 | EACH |
| 55 | 55 | Supply and fixing magenetic catcher ISI Mark of standard size and quality complete all as specified and directed | item55 | 12 | EACH |
| 56 | 56 | Supply and fixing 20mm dia cup board knob of mild steel bright finish, of approved quality with nuts & washers complete all as specified and directed | item56 | 12 | EACH |
| 57 | 57 | Supply and fixing steel ventilator with centre hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. \nNotes: - Glass, wire gauge shall be measured & paid separately. | item57 | 20 | SQM |
| 58 | 58 | Supply and fixing factory made Box type steel window, double shutter glazed and wire gauzed, with side hung shutters including box type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, complete with glazing bars dovetailed or welded including MS fillets including provision and welding of guard bars including one shop coat of red oxide primer over window, frame & guard bars complete all as specified and as directed.\n Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 , dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from GE office or from the office of CWE (AF) Ambala. \n(ii) Glazing & Wire cloth shall be measured and paid separately as S&F and guard bars shall be measured and paid separately as Supply only. \n(iii) The term double shutter stated is meant for providing glazed shutter as well as wire gauged shutter on outside & inside of the frame respectively. | item58 | 222 | SQM |
| 59 | 59 | Supply only mild steel framed work such as grills, gratings, fillets etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars etc conforming to Fe 290, grade E-165 complete all as directed | item59 | 1500 | KG |
| 60 | 60 | Supply and fixing mild steel framed work as in door or gate of angle or other sections with gusset plates, rails, braces etc, using ornamental design as approved complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and purpose made hinges or steel hanging door fittings exclusive of steel sheeting or other covering, running rails and guides but including hanging, fastening and fixing complete conforming to Fe-290 Gde E-165 complete all as specified and as directed. | item60 | 1400 | KG |
| 61 | 61 | Supply and fixing mild steel TMT bars, 10 mm dia and over, cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. | item61 | 50 | KG |
| 62 | 62 | Supply and fixing mild steel TMT bars 5mm dia and over upto and including 10mm dia bars as in stirrups, spacers and binders cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed. | item62 | 20 | KG |
| 63 | 63 | Supply and fixing galvanised mild steel water tubes 15 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and as directed. | item63 | 100 | RM |
| 64 | 64 | Supply and fixing galvanised mild steel water tubes 20 mm bore, medium grade, galvanised with all fittings and fixed complete to wall and ceiling or laid in floor complete all as specified and as directed. | item64 | 80 | RM |
| 65 | 65 | Refixing old steel tubing and connections retrieved from srl No 10 above including cleaning at new or old location with new GI fittings, bore of tubing 15mm bore complete all as specified and as directed. | item65 | 50 | RM |
| 66 | 66 | Refixing old steel tubing and connections retrieved from srl No 11 above including cleaning at new or old location with new GI fittings, bore of tubing 20 mm bore complete all as specified and as directed. | item66 | 20 | RM |
| 67 | 67 | Material and labour in repair 600X450 mm, beveled edge mirror, of selected quality glass 5.5 mm thick, mounted on and including 6mm thick AC building board fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. | item67 | 7 | EACH |
| 68 | 68 | Supply and fixing in repair vitreous china squatting pan (Orissa pattern) 580mmx440mm, white with PVC ‘P’ or ‘S’ trap front or back inlet with integral foot rests excluding flushing cistern and flush pipe but including providing lime concrete bedding complete all as specified and as directed. | item68 | 11 | EACH |
| 69 | 69 | Supply and fixing in repair PVC low level flushing cistern, white, valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron /PVC brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified and as directed. | item69 | 11 | EACH |
| 70 | 70 | Supply and fixing in repairs vitreous China Urinal, bowl type, back to corner wall type,white , with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortar 1:4 fixing automatic flushing cistern with PVC/MS brackets , flush pipe & waste pipe complete all as specified and as directed. | item70 | 4 | EACH |
| 71 | 71 | Supply and fixing in repair vitreous china wash hand basin ,oval type, white, of size 630X450mm including 32mm bore PVC waste pipe and CP waste fitting and a pair of mild steel angle iron/ PVC brackets of suitable size fixed in counter slab complete all as specified and as directed. | item71 | 7 | EACH |
| 72 | 72 | Supply and fixing in repair 15 mm dia pillar tap , fancy type, brass chromium plated with capstan head chromium plated screwed down high pressure with or without lettered “hot' or 'cold” with long screwed shank and flynut screwed complete all as specified.\n | item72 | 7 | EACH |
| 73 | 73 | Supply and fixing in repair stop valve 15mm bore, brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed. | item73 | 10 | EACH |
| 74 | 74 | Supply and fixing in repair angle valve 15mm bore , brass, screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and as directed. | item74 | 5 | EACH |
| 75 | 75 | Supply and fixing in repair 15mm dia stop valves cast copper alloy chromium plated concealed type, long shank and cup with capstan head and cup screwed both ends for iron pipe or for union all as specified. | item75 | 5 | EACH |
| 76 | 76 | Supply and fixing in repair bib taps 15 mm bore, brass, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. | item76 | 17 | EACH |
| 77 | 77 | Supply and fixing in repair 32mm dia brass CP waste fitting for wash hand basin with long screwed shanks and fly nuts complete all as specified and as directed. | item77 | 7 | EACH |
| 78 | 78 | Supply and fixing in repair brass Chromium plated shower rose, fancy type,suitable for 15 mm boe pipe with or without swivel joints any size including fixed to steel pipe or union complete all as specified and as directed.\n\n | item78 | 4 | EACH |
| 79 | 79 | Supply and fixing in repairs PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed | item79 | 7 | EACH |
| 80 | 80 | Supply and fixing in repairs PVC connection 600mm long with 2 nos PTMT check nuts, suitable for 15mm bore complete all as specified and directed | item80 | 11 | EACH |
| 81 | 81 | Supply and fixing PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed to wall with suitable size FI clamps of size 25mmx3mm, complete all as specified and as directed. | item81 | 25 | RM |
| 82 | 82 | Supply and fixing PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, fixed to wall with suitable size FI clamps of size 25mmx3mm, complete all as specified and as directed. | item82 | 30 | RM |
| 83 | 83 | Supply and fixing PVC (SWR) bends any radius, for 110mm bore of pipe complete all as specified and as directed. | item83 | 8 | EACH |
| 84 | 84 | Supply and fixing PVC (SWR) bends any radius, for 75mm bore of pipe complete all as specified and as directed. | item84 | 6 | EACH |
| 85 | 85 | Supply and fixing PVC bends any radius, for 110mm bore uPVC waste soil discharge pipe conforming to IS- 14735 complete all as specified and as directed. | item85 | 4 | EACH |
| 86 | 86 | Supply and fixing PVC bends any radius, for 75mm bore uPVC waste soil discharge pipe conforming to IS- 14735 complete all as specified and as directed. | item86 | 4 | EACH |
| 87 | 87 | Supply and fixing 75 mm outlet dia PVC (SWR) floor trap, with CP grating including jointing to waste pipe with solvent, fixed in cement concrete 1:2:4 ,type B0 complete all as specified and as directe | item87 | 5 | EACH |
| 88 | 88 | Material and labour for 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces of walls ,of any description admixed with DR Fixit ,SBR latex added at the rate of 7 kg per bag of cement finished even and smooth without using extra cement including preparation of surfaces, area coverage as per manufacturer's instructions complete all as specified and as directed. | item88 | 600 | SQM |
| 89 | 89 | Material and labour for three coats of heavy duty acrylic elastromeric water proof wall coating of DR Fixit raincoat or Dulux weathershield powerflexx or Apex ultima protek duralife over a coat of primer as per respective manufacturer instruction , of any tint/ shade, to achieve total 110 microns DFT (dry film thickness) on newly plastered surfaces of walls including preparation of surfaces area coverage as per manufacturer's instruction complete all as specified and as directed. | item89 | 638 | SQM |
| 90 | 90 | Material and labour for water proof coating by brush , of cement slurry mixed with Dr Fixit URP or Shali SBR Latex of STP Limited or Nitobond SBR latex of Fosroc ,compound mixed as per manufacturer instructions but not less than 10 kg per bag of cement on newly plastered surfaces of walls including preparation of surfaces area coverage as per manufacturer's instruction complete all as specified and as directed.\n | item90 | 2000 | SQM |
| 91 | 91 | Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed.\nNote :- The rates for stone slab roofing includes for all straight, raking and circular cutting and waste. | item91 | 50 | RM |
| 92 | 92 | Material and labour for three coats of white wash on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. | item92 | 50 | SQM |
| 93 | 93 | Material and labour for three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and as directed. | item93 | 4000 | SQM |
| 94 | 94 | Material and labour for two coats of Oil bound distemper of approved shade/tint,over a coat of primer, on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. | item94 | 3200 | SQM |
| 95 | 95 | Material and labour for two coats of Oil bound distemper of approved shade/tint, on old previously treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. | item95 | 200 | SQM |
| 96 | 96 | Material and labour for two coats of cement base paint of approved shade/tint,over a coat of primer, on newly plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. | item96 | 3500 | SQM |
| 97 | 97 | Material and labour for two coats of cement base paint of approved shade/tint, on old previousely treated plastered surfaces of walls including preparation of surfaces complete all as specified and as directed. | item97 | 100 | SQM |
| 98 | 98 | Material and labour for two coats of synthetic enamel paint over one coat of red oxide primer on new steel and iron surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed. | item98 | 940 | SQM |
| 99 | 99 | Material and labour for two coats of synthetic enamel paint over one coat of pink primer on new wood and wooden based surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed. | item99 | 500 | SQM |
| 100 | 100 | Material and labour for two coats of synthetic enamel paint on new/old steel and iron surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed. | item100 | 100 | SQM |
| 101 | 101 | Material and labour for One coat of synthetic enamel paint on previously treated steel and iron surfaces, of any description including preparation of surface over 10cm width or girth complete all as specified and as directed. | item101 | 50 | SQM |
| 102 | 102 | Taking down carefully copper/aluminium point wiring light/fan/bell/socket or power complete fittings such as switches, sockets, ceiling rose, pandent holders, light fittings etc including taking down carefully by unscrewing from board/outlets/DBs/fittings etc such as switches,lamp holdes,brakets,ceiling fittings, bulkhead fittings,sketch fittings, tube light fittings, fan regulators,electric meters, meter bos any type etc and/or drawing out from existing conduit/batten and making good disturbed surfaces of walls/floors/ceilings complete all as specified and as directed . | item102 | 2499 | Per Point |
| 103 | 103 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one light/fan point controlled by one way switch 6 amp complete all as specified and as directed.\n | item103 | 1537 | Per Point |
| 104 | 104 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin switch socket combination 6 amp on the independent board complete all as specified and as directed. | item104 | 765 | Per Point |
| 105 | 105 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 3 pin switch outlet combination 5/6 amp on the same board with other switches complete all as specified and as directed. | item105 | 134 | Per Point |
| 106 | 106 | Material and labour for concealed point wiring with (FRLS) Flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with stranded copper conductor, in and including non metallic rigid PVC concealed conduit not less than 20mm dia, medium grade, with conduit fittings including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc concealed in wall/ceiling/roof etc with provision of new sunken type pressed steel/welded MS terminal boxes of not less than 1.6mm wall thickness with decorative laminated sheet top cover 3 mm thick (Hylam) including (FRLS) Flame retardant low smoke PVC insulated multistranded copper earth conductor 1.50 sqmm connected to common earth and earth dolly one 15/16 amp multipurpose switch socket combination on independent board complete all as specified and as directed.\nNote for srl No 103 to 106 :- (i) Switch, switch socket outlet, switch socket combination and fan regulator shall be measured and paid for separately.\n(ii) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match with the existing surfaces. | item106 | 63 | Per Point |
| 107 | 107 | Supply and fixing switch piano, flush type 5/6 amp, single pole, one way 240 volt complete all as specified and directed. | item107 | 1537 | EACH |
| 108 | 108 | Supply and fixing switch socket combination 5 pin, 5/6 amp, flush type complete all as specified and directed. | item108 | 899 | EACH |
| 109 | 109 | Supply and fixing switch socket combination 2 in1,3/5 pin, 5/15 amp, flush type universal complete all as specified and as directed. | item109 | 63 | EACH |
| 110 | 110 | Supply and fixing in replacement ceiling rose surface bakelite, 65X50 mm three terminals ,230 volts,ISI mark complete all as specified and as directed. | item110 | 950 | EACH |
| 111 | 111 | Supply & fixing in replacement bracket holder/angle lamp holder PVC/Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed. \n | item111 | 104 | EACH |
| 112 | 112 | Supply and fixing in replacement electronic fan regulator socket type,SP 415 volts grade,50 Hz, 100 watts heavy duty including making necessary connections, to make it functional complete all as specified and as directed.\n | item112 | 180 | EACH |
| 113 | 113 | Supply and fixing MCCB DB vertical TPN 4 ways, factory made with 200 Amps rated busbar 240 volts AC for fixing MCBs/Isolators/RCCBs, IP 65 protection, double door, concealed in walls including making good the disturbed surfaces as per existing specifications with & including mounting of MCCB 125 amps as incoming after taking down/out enclosure as existing at site complete all as specified and as directed. | item113 | 7 | EACH |
| 114 | 114 | Supply and fixing sheet metal enclosures for SPN 8 way,DB's with 200 Amps rated busbar 415 volts AC for fixing MCBs/Isolators/RCCBs, IP 43 protection, double door, concealed in walls including making good the disturbed surfaces as per existing specifications after taking down/out enclosure as existing at site complete all as specified and as directed. | item114 | 30 | EACH |
| 115 | 115 | Supply and fixing sheet metal enclosures for TPN 4 way,DB's factory made with 200 Amps rated busbar 240 volts AC ,for fixing MCBs/Isolators /RCCBs, IP 42 protection, double door, concealed in walls including making good the disturbed surfaces as per existing specifications after taking down/out enclosure as existing at site complete all as specified and as directed. | item115 | 14 | EACH |
| 116 | 116 | Supply and fixing in replacement MCB 5 to 32 amps,SP,10 kA,240/415 volts with 'B' curve ,finger proof terminal , bi-connect termination,label holder,35 Sqmm terminal capacity insulated sliding shutter,large two position dolly,ISI marked to be fixed on DB complete all as specified and as directed.\n | item116 | 190 | EACH |
| 117 | 117 | Supply and fixing in replacement MCB 32 amps,SPN,10 kA,240 volts with 'B' curve, finger proof terminal , bi-connect termination,label holder,35 Sqmm terminal capacity insulated sliding shutter,large two position dolly,ISI marked to be fixed on DB complete all as specified and as directed.\n | item117 | 30 | EACH |
| 118 | 118 | Supply and fixing in replacement MCB 63 amps,TPN,10 kA,415 volts with 'B' curve, finger proof terminal , bi-connect termination,label holder,35 Sqmm terminal capacity insulated sliding shutter,large two position dolly,ISI marked to be fixed on DB complete all as specified and as directed.\n | item118 | 40 | EACH |
| 119 | 119 | Supply and fixing in replacement MCCB 100 amps,TPN,16 kA, 415 volts with fixed thermal and magnetic setting complete all as specified and as directed.\n | item119 | 6 | EACH |
| 120 | 120 | Supplying & laying of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 4 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 2.5 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering after taking down/out wire as existing at site complete all as specified and as directed.. \nNote :- Two runs of 4 sqmm cable alongwith One run of 2.5 sqmm cable as earth wire with conduit shall be measured as one length. | item120 | 435 | RM |
| 121 | 121 | Supplying & laying of sub main wiring with two single core FRLS,PVC insulated cable,1100 volts grade, 6 sqmm nominal cross sectional area stranded copper conductor and one single core green FRLS, PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 25mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering after taking down/out wire as existing at site complete all as specified and as directed.. \nNote :- Two runs of 6 sqmm cable alongwith One run of 4 sqmm cable as earth wire with conduit shall be measured as one length. | item121 | 460 | RM |
| 122 | 122 | Supplying & laying of sub main wiring with single core FRLS,PVC insulated cable,1100 volts grade, 4 runs of 10 Sqmm nominal cross sectional area stranded copper conductor and two runs of 6 sqmm single core green FRLS, PVC insulated stranded copper conductor earth continuity cable drawn through with and including non metallic rigid PVC conduit medium grade not less than 75mm bore including accessories concealed in wall/floors/roof etc including cutting chases in wall/ceiling and making good the disturbed surfaces to match of wall/ceiling by plastering & applying two coats of distempering after taking down/out wire as existing at site complete all as specified and as directed.. \nNote :- Four runs of 10 sqmm cable alongwith Two runs of 6 sqmm cable as earth wire with conduit shall be measured as one length. | item122 | 150 | RM |
| 123 | 123 | Taking down ceiling wall mounted/exhaust fan any type, sweep, make from any location and refixing back at desired location after overhauling /servicing/ greasing with & including replacement of unserviceable minor parts such as fan hook, fan rod, nuts,bolts,washers etc, rubber reel and split pin etc and spray painting with one coat of white synthetic enamel paint & writing MES No with black paint including making necessary connections to make it functional with PVC flexible wire 3 core copper conductor 0.5 Sqmm upto connection/ceiling rose complete all as specified and as directed. | item123 | 180 | EACH JOB |
| 124 | 124 | Supply and fixing energy saving ceiling fan 1200 mm sweep, ,with 3 blades , not less than 5 star rating,electric driven single phase 240 volts and connecting up including provision of cable from ceiling rose or connector to fan to make it functional complete all as specified and as directed. \n | item124 | 40 | EACH |
| 125 | 125 | Supply and fixing exhaust fan metal body with louvers, single phase 230/240 volt of size 300mm sweep 1400 RPM,heavy duty including making holes of suitable size grouting of nuts and bolt etc and making good to match the existing surface including lours and making connetion with the hole of twisted copper flexible wire 23/0.0076mm complete all as specified and as directed. | item125 | 44 | EACH |
| 126 | 126 | Supply and fixing in replacement LED tube light fitting 1x18 watt fitting, 230 volts in commmercial channel with powder coated CRCA sheet housing with opal acrylic diffuser for LED with & including LED tubelight with high efficient LED18 watts in aluminium housing with clear & milky diffuser including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. \nNote:- LED fitting should have PF 0.9,CRI>70,L70. | item126 | 522 | EACH |
| 127 | 127 | Supply and fixing in replacement indoor decorative LED battern with opal diffuser with inbuilt LED tube 10 watts and driver designed with high transmitting optics for even light distribution, IP 20 degree protection having length 620 mm including connecting with twin core twisted flexible copper conductor cable of suitable size and making necessary connection to make it functional complete all as specified and as directed. \nNote:- LED fitting should have PF 0.9,CRI>70,L70.\n\n | item127 | 60 | EACH |
| 128 | 128 | Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for walls, shafts, manholes not exc 10 Sqm on plan or for laying SWR pipe or cable protection pipes/cables etc and getting out, in soft/loose soil complete all as directed | item128 | 125 | CUM |
| 129 | 129 | Returning filling in including spreading leveling watering and well ramming in layers not exc 25 cm thick each complete all as specified and as directed. | item129 | 50 | CUM |
| 130 | 130 | Removal of surplus soil to a distance not exc 500 mtrs & depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified and as directed. | item130 | 75 | CUM |
| 131 | 131 | Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed. | item131 | 40 | CUM |
| 132 | 132 | Supply and laying sub class 'B' bricks old sizes over the underground HT/LT cable, laid dry & flat abutting each other with width equal to length of bricks for protection of cable complete all as specified and as directed. | item132 | 3.7 | Per 1000 Nos |
| 133 | 133 | Supply and fixing GI pipe 50 mm bore , light grade as in trenches, under road, fixed to wall, with fixing arrangement along the pole, under floor etc including taking down of old pipe complete all as specified and as directed \nNote :- Excavation and earth work shall be measured and paid separately. | item133 | 30 | RM |
| 134 | 134 | Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 35 Sqmm 3.5 core conforming to IS- 7098 (Part I) 1988 as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down/out cable as existing at site complete all as specified and as directed.\n | item134 | 206 | RM |
| 135 | 135 | Supplying, laying, jointing, testing and commissioning under ground XLPE LT electric cable 1100 Volts grade, heavy duty, PVC insulated and sheathed armoued electric power cable with stranded aluminium conductor, of cross sectional area 50 Sqmm 3.5/4 core conforming to IS- 7098 (Part I) 1988 as in trenches over brick and sand cushioning or along the wall/pole through pipe etc served with an inner sheathing of PVC tape and overall PVC sheathed armoured with galvanized steel wire or tape including taking down/out cable as existing at site complete all as specified and as directed.\nNote for srl No 134 & 135 :- Excavation and earth work, GI pipe, brick and sand cushioning shall be measured and paid separately. | item135 | 340 | RM |
| 136 | 136 | Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to and including galvanised earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of bolts, nuts, check nuts and washers of galvanized iron and connection to earthing test point & earth dolly including watering pipe GI 20 mm bore, light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel,lugs, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover slab 50 mm thick 1:2:4 type B-1 using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover with CI frame all as shown in electrical plate No 3 of SSR part-I (2009), including testing on completion including taking down of existing earthing as exists on site all as specified and as directed. \nNote :-- (i) Any variation in length of earth lead and protection pipe of earth lead shall be adjusted through DO.\n(ii) On testing if the earth resistance is not obtained, earthing will be generated at NO extra cost ,till the desired earth resistance is obtained. | item136 | 16 | EACH Job |
| 137 | 137 | Deduct total amount of Credit Rs 288613.00 |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
