Fabrication And Installation Of New Barge At Charsundarpur Major Rli Scheme Under Ranaghat-I Block
Tender Value
9.88 Lakhs
Estimated cost
Bid Submission
16 Dec 2019
0 days left
EMD
19800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kalyani(A-M) Division, Kalyani, Nadia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Fabrication And Installation Of New Barge At Charsundarpur Major Rli Scheme Under Ranaghat-I Block
BOQ
| Fabrication & Installation of new Barge at Charsundarpur Major R.L.I Scheme under Ranaghat (A-M) Sub-Division under Core Sector Programme. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Patch/Doubling works complete with 5mm M.S. Plate including welding,gas cutting,fitting,fixing complete. (a) Cost of 5mm M.S. Plate including wastage due to cutting including labour charges for straightening fitting,fixing in position | BI01010001010000000000000515BI0100001114 | 66.55 | Sq-m |
| 2 | 2 | (b) Gas cutting to required size of 5 mm thick MS plat, N.S.C. channel etc. including labour charges , Hire charges for tools & plants . | BI01010001010000000000000515BI0100001115 | 288.55 | M |
| 3 | 3 | (c) Electric welding charges of 5 mm MS plat,MS channels etc. and other member of the barge including labour charges, hire gharges for all tools and plants. | BI01010001010000000000000515BI0100001115 | 627.37 | M |
| 4 | 4 | Supply fitting fixiing complete with fastener. (a) Galvanized, corrugated iron sheet work(excluding the supporting frame work) fitted and fixed with 10 mm dia 'J' or'L' hook bolt, limpet and bitumen washer& putty complete with 150 mm End lap and one corrugation minimum side lap with 0.63 mm thick sheet in roof. | BI01010001010000000000000515BI0100001116 | 17.66 | M |
| 5 | 5 | (b) G.I. sheet ridging with 25 cm. lap each way fitted and fixed with necessary bolt & nuts screw, washer etc. complete with 0.63 mm sheets. | BI01010001010000000000000515BI0100001118 | 4.25 | M |
| 6 | 6 | Suppling fitting & fixing of BRC net (75 mmx25mmx10swg) with nuts & bolts of the barge including gas cutting etc. | BI01010001010000000000000515BI0100001119 | 17.54 | Sq-M |
| 7 | 7 | Supply 1.5 mm (16 SWG) M.S sheet fitted & fixed on one or both faces of M.S bar etc. with point welding not more than 150mm apart complete in all respect & including cost of labour & materaials as per direction of EIC. | BI01010001010000000000000515BI0100001120 | 11.69 | Sq-M |
| 8 | 8 | Supply in fitting & fixing MS angle (45 mm x45mmx 5 mm) including gas cutting etc. | BI01010001010000000000000515BI0100001121 | 125 | M |
| 9 | 9 | Supply in fitting & fixing of MS flat bar 40mm x 6mm for Straightening the B.R.C. net including gas cutting etc | 185 | M | |
| 10 | 10 | Supply in fitting & fixing of B.R.C. net by 3/8\" x 2\" M.S bolts & nuts with washers with M.S angles M.S flat M.S sheets etc. & others members of the barge | 5 | Kg | |
| 11 | 11 | Supply in fitting & fixing of B.R.C. net by 3/8\" x 1 1/2\" M.S bolts & nuts with washers with M.S angles M.S flat M.S sheets etc. & others members of the barge | 5 | Kg | |
| 12 | 12 | Supply in fitting & fixing of B.R.C. net by 1/2\" x 1 1/2\" M.S bolts & nuts with washers with M.S angles M.S flat M.S sheets etc. & others members of the barge | 5 | Kg | |
| 13 | 13 | Supply in fitting & fixing of B.R.C. net by 5/8\" x 1 1/2\" M.S bolts & nuts with washers with M.S angles M.S flat M.S sheets etc. & others members of the barge | 5 | Kg | |
| 14 | 14 | (a) Supply in fitting & fixing of MS channel (75 mm x 40mm x 6mm) for base of manhole cover including gas cutting | 4.4 | M | |
| 15 | 15 | (b) Drilling charges 12 mm dia hole for manhole cover plate & M.S channel base | 160 | Each | |
| 16 | 16 | (c) Supply in fitting & fixing of 1/16\" thickness rubber insertion sheet with 12 nos. drilling hole for water tight arreangement of manhole cover | 4 | Each | |
| 17 | 17 | Chipping , scrapping, wire brushing & cleaning of the opainted surface for keel,hull, frame, superstructure deck, tender both inside & outside as per direction of the EIC. 'Twin Hull Barge(total area 240 mSq. Approx. | 1 | Each | |
| 18 | 18 | (a) Cost of door (6'-0\"x3'-0\") by paint welding with BRC net (75mm x25mm x 10SWG), 49mm x 6mm M.S flate bar , 6\" hings 4 pcs. 10\" hasp bolts 2 nos. etc. complete as per direction of EIC. | 2 | Each | |
| 19 | 19 | (b) Supply, fitting, fixing complete of 1\" dia M.S rod for plate welding of M.S plates of the Barge | 105 | M | |
| 20 | 20 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality, including smoothing surface by sand papering etc. | 246.05 | SqM | |
| 21 | 21 | Painting two coats(with any shade except white)with best quality synthetic enamel paint of apporved make and brand including smoothening suface by sand papering etc. including using of approved putty etc. on the steel surface or other metal surface with super gloss(hi-gloss) | 246.05 | SqM | |
| 22 | 22 | Installation of Diesel Engine Pump sets of any make/brand for Major RLI on pump foundation over sal sleeper (to be supplied departmentally) by fixing nuts and bolts and grouting with 1:1.5:3 CC and making connection of suction hose,foot valve with necessary fittings at the inlet end of the water pump and fitting fixing og 90 deg. M.S priming bendsluice valve and delivery hose with all necessary fittings at the delivery end of the water pump maintaining proper alignment & levelling mending cutting floor on the wall of pump have with necessary mending goods damages etc. complete as per direction of the EIC( Pump sets and all accessories shall be supplied departmentaly) | 2 | Each | |
| 23 | 23 | Supply & Installation of M.S chasis as per direction of E.I.C | 2 | LS | |
| 24 | 24 | Supplying,fitting and fixing including transportation of sign board for identifying the exact location of Major RLI scheme(one at road side and other at site) the board will be made 3mm thick M.S plate of size 300mm x 600mm and fitted & fixed on 50mm G.I pipe of IS 1239/90 (part-I) including cutting,welding and writting of both sides of sign board.Base-Yellow & words-Red.Both bottom of the stands pipe will be grouted in 1:2:4 CC on a single brick flat soling.This will include one materials and labour complete as per drawing and direction of EIC | 2 | LS | |
| 25 | 25 | Transporttation charges for carrying of all the materials working devices etc. upto the scheme & back. | 1 | Each | |
| 26 | 26 | Supply of Sal Wood Slipper for Electro Motor Base fixing 6\"x6\"x6' Long 4 nos. | 0.162 | CuM | |
| 27 | 27 | TOTAL | 1 | LS | |
| 28 | 28 | Including GST @12% | BI01010001010000000000000515BI0100001140 | 1 | LS |
| 29 | 29 | Including CESS @1% | BI01010001010000000000000515BI0100001141 | 1 | LS |
AI Tender Summary
Tender Timeline
Dec 02, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 16, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 18, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender