Providing And Fixing Paver Block And Led High Mast At Surajkheda Tq . Sengaon Dist . Hingoli
Tender Value
9.98 Lakhs
Estimated cost
Bid Submission
15 Dec 2019
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sengaon → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing And Fixing Paver Block And Led High Mast At Surajkheda Tq . Sengaon Dist . Hingoli
BOQ
| Name of Work : Providing and Fixing Paver Block and LED High Mast at Surajkheda Tq. Sengaon Dist. Hingoli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken).( ItemNo. 50.56) | BI01010001010000000000000515BI0100001113 | 24.21 | CuM |
| 2 | 2 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. SSR 2018-19 ,Item No.2.29a | BI01010001010000000000000515BI0100001114 | 0.81 | CuM |
| 3 | 3 | Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge . (Item No. 50.58) | BI01010001010000000000000515BI0100001115 | 2.42 | CuM |
| 4 | 4 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete.SSR 2018-19 ,Item No.2.30 | BI01010001010000000000000515BI0100001116 | 0.81 | CuM |
| 5 | 5 | Compacting the sub grade/gravel/oversize metal (200 mm loose) layers for all width with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete. (Item No. 50.59) | BI01010001010000000000000515BI0100001117 | 12.11 | SqM |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (Item No. 24.01) | BI01010001010000000000000515BI0100001118 | 12.11 | CuM |
| 7 | 7 | Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) ( Item No. 33.54) | BI01010001010000000000000515BI0100001119 | 121.05 | SqM |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) ( Item No. 24.16) | BI01010001010000000000000515BI0100001120 | 3.23 | No |
| 9 | 9 | Add For Royalty | BI01010001010000000000000515BI0100001121 | 42.42 | CuM |
| 10 | 10 | Add For Q.C. Charges | BI01010001010000000000000515BI0100001122 | 1 | No |
| 11 | 11 | Add for Insurance | BI01010001010000000000000515BI0100001123 | 1 | No |
| 12 | 12 | Add for GST | BI01010001010000000000000515BI0100001124 | 1 | No |
| 13 | 13 | Supplying & erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW '1-3-2 | BI01010001010000000000000515BI0100001125 | 351 | Meter |
| 14 | 14 | Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete. 1-2-2 | BI01010001010000000000000515BI0100001126 | 80 | Each |
| 15 | 15 | Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m long “B” grade G.I. pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC (2-9-7) | BI01010001010000000000000515BI0100001127 | 28 | Each |
| 16 | 16 | Supplying and erecting LED street light fitting 120 W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2. 2-5-9 | BI01010001010000000000000515BI0100001128 | 28 | Each |
| 17 | 17 | Supplying and erecting two pole power contactor 230 V, 32 A for time switch complete erected on provided wooden block/ box, with necessary materials.(4-4-3) | BI01010001010000000000000515BI0100001129 | 2 | Each |
| 18 | 18 | Supplying and erecting double pole metal clad switch with HC type fuse and neutral link 240V, 32A on iron / GI frame as per specification no. SW-SWR/MDP .(5-1-3) | BI01010001010000000000000515BI0100001130 | 2 | Each |
| 19 | 19 | Supplying, erecting & marking SPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB 5-3-5 | BI01010001010000000000000515BI0100001131 | 28 | Each |
| 20 | 20 | Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete erected on angle iron/ GI frame. 5-4-20 | BI01010001010000000000000515BI0100001132 | 28 | Each |
| 21 | 21 | Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete. 6-1-12 | BI01010001010000000000000515BI0100001133 | 1 | SqM |
| 22 | 22 | Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.(6-1-19) | BI01010001010000000000000515BI0100001134 | 20 | Kg |
| 23 | 23 | Supplying and erecting self-locking arrangement with keys in duplicate, made of brass duly erected, flush with surface of panel / cupboard. (6-1-20) | BI01010001010000000000000515BI0100001135 | 2 | Each |
| 24 | 24 | Supplying, erecting & terminating XLPE armoured cable 2 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 7-1-5 | BI01010001010000000000000515BI0100001136 | 315 | Meter |
| 25 | 25 | Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE (7-6-2) | BI01010001010000000000000515BI0100001137 | 21 | Meter |
| 26 | 26 | Supplying & erecting FRP box of size 250 x 200 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB (7-8-9 ) | BI01010001010000000000000515BI0100001138 | 7 | Each |
| 27 | 27 | Supplying and erecting steel tubular swaged pole 165.1 x 139.7 x 114.3 mm. dia with 4.5 x 4.5 x 3.65 mm thickness ( 5 + 2 + 2 m ) length respectively and total 9 m long with pole cap, base plate in provided foundation (weight 147 kg) as per specification no. OH-PL/STP (8-1-3) | BI01010001010000000000000515BI0100001139 | 7 | Each |
| 28 | 28 | Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EA-EP (9-1-4) | BI01010001010000000000000515BI0100001140 | 8 | Each |
| 29 | 29 | Making trench of suitable width and depth in hard murum / tar road for laying provided LT cable of 16 sq. mm & above and covered with half round hume pipe complete as per specification no. CW-EXN-CTR 16-1-3 | BI01010001010000000000000515BI0100001141 | 267 | Meter |
| 30 | 30 | Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (above 6 m to 9 m poles) (16-3-3) | BI01010001010000000000000515BI0100001142 | 7 | Each |
| 31 | 31 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge. (eDSR 6.09 P.No. P.No. 87) | BI01010001010000000000000515BI0100001143 | 1 | No |
| 32 | 32 | Add GST | BI01010001010000000000000515BI0100001144 | 1 | No |
AI Tender Summary
Tender Timeline
Nov 30, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 15, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 17, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender