( 02 ) Dhfws/Slg/Niet/19-20/03 Infrastructure Strengthening Of Muniram Sub-Centres To Be Up-Graded Into Suswasthya Kendras ( Health And Wellness Centres ) Under Naxalbari Block , Darjeeling .
Tender Value
7.37 Lakhs
Estimated cost
Bid Submission
16 Dec 2019
0 days left
EMD
14750
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naxalbari → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
( 02 ) Dhfws/Slg/Niet/19-20/03 Infrastructure Strengthening Of Muniram Sub-Centres To Be Up-Graded Into Suswasthya Kendras ( Health And Wellness Centres ) Under Naxalbari Block , Darjeeling .
BOQ
| Name of Work: Infrastructural Srenghtening of Muniram SC under Naxalbari Block in Darjeeling District to Suswasthya Kendras(Health & Welness Center) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description (SL No.1-65 Civil &SL No 66-88 Electrical) | Item Code / Make | Quantity | Units | |
| 1 | 1 | Dismantling artificial stone flooring upto 50 mm. thick and removing rubbish as directed within a lead of 75 m. | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.01 | In Ground Floor | BI01010001010000000000000515BI0100001114 | 50 | Sq.M. |
| 3 | 1.02 | In 1st Floor | BI01010001010000000000000515BI0100001115 | 53 | Sq.M. |
| 4 | 2 | Stripping off worn out plaster and raking out joints of walls, celings etc. In any floor. | BI01010001010000000000000515BI0100001116 | 360 | Sq.M. |
| 5 | 3 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile upto 0.09 Sq.m (i) Coloured decorative | BI01010001010000000000000515BI0100001117 | ||
| 6 | 3.01 | In Ground Floor | BI01010001010000000000000515BI0100001118 | 6 | Sq.M. |
| 7 | 3.02 | In 1st Floor | BI01010001010000000000000515BI0100001119 | 3 | Sq.M. |
| 8 | 4 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc. (D) Wall With Polymerised Adhesive and Epoxy grout Pointing including spacer- 2 mm ( When Tiles are laid over existing hard ready surface) (b) Area of each tile above 0.09 Sq.m [using adhesive 4.5 mm thick] (ii) Other than Coloured decorative including white | BI01010001010000000000000515BI0100001120 | ||
| 9 | 4.01 | In Ground Floor | BI01010001010000000000000515BI0100001121 | 15 | Sq.M. |
| 10 | 4.02 | In 1st Floor | BI01010001010000000000000515BI0100001122 | 17 | Sq.M. |
| 11 | 5 | supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment Light Colour | BI01010001010000000000000515BI0100001123 | ||
| 12 | 5.01 | In Ground Floor | BI01010001010000000000000515BI0100001124 | 49 | Sq.M. |
| 13 | 5.02 | In 1st Floor | BI01010001010000000000000515BI0100001125 | 45 | Sq.M. |
| 14 | 6 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement (ii) 25 mm. thick | BI01010001010000000000000515BI0100001126 | ||
| 15 | 6.01 | In Ground Floor | BI01010001010000000000000515BI0100001127 | 18 | Sq.M. |
| 16 | 6.02 | In 1st Floor | BI01010001010000000000000515BI0100001128 | 18 | Sq.M. |
| 17 | 7 | Extra cost of colouring over corresponding items of artificial stone (A) For item 3 [with 3 mm thick colour topping] (iii) Colouring pink, cream, yellow, green | BI01010001010000000000000515BI0100001129 | 36 | Sq.M. |
| 18 | 8 | Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] | BI01010001010000000000000515BI0100001130 | 2 | Sq.M. |
| 19 | 9 | Applying 20 mm. thick cement plaster to wall, ceiling with 1 : 6 cement mortar. | BI01010001010000000000000515BI0100001131 | ||
| 20 | 9.01 | In Ground Floor | BI01010001010000000000000515BI0100001132 | 50 | Sq.M. |
| 21 | 9.02 | In 1st Floor | BI01010001010000000000000515BI0100001133 | 45 | Sq.M. |
| 22 | 10 | Applying 15 mm. thick cement plaster to wall, ceiling with 1:4 cement mortar. | BI01010001010000000000000515BI0100001134 | ||
| 23 | 10.01 | In Ground Floor | BI01010001010000000000000515BI0100001135 | 115 | Sq.M. |
| 24 | 10.02 | In 1st Floor | BI01010001010000000000000515BI0100001136 | 105 | Sq.M. |
| 25 | 11 | Applying 10 mm. thick cement plaster to wall, ceiling with 1:4 cement mortar. | BI01010001010000000000000515BI0100001137 | ||
| 26 | 11.01 | In Ground Floor | BI01010001010000000000000515BI0100001138 | 15 | Sq.M. |
| 27 | 11.02 | In 1st Floor | BI01010001010000000000000515BI0100001139 | 25 | Sq.M. |
| 28 | 12 | Neat Cement punning about 1.5mm thick (cement 0.152 cu.m. per sq.m.) in wall, dado etc. | BI01010001010000000000000515BI0100001140 | 50 | Sq.M. |
| 29 | 13 | Wood work in door and window frame fitted and fixed in position complete\nincluding a protective coat of painting at the contact surface of the frame\nexluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (c) Sal : Siliguri In Ground Floor | BI01010001010000000000000515BI0100001141 | 0.05 | Cu.M. |
| 30 | 14 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings (iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. | BI01010001010000000000000515BI0100001142 | 1 | Sq.M. |
| 31 | 15 | Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±)1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm /welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturersspecifications and direction of Engineer-in-Charge. b) Factory made Single piece extruded PVC profiles door shutter of both side\nlaminated wood grains decorative Finish: | BI01010001010000000000000515BI0100001143 | 3 | Sq.M. |
| 32 | 16 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) (a) 40mm X 6mm, 250mm Length | BI01010001010000000000000515BI0100001144 | 12 | Each |
| 33 | 17 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark (viii) 100mm. X 75mm. X 3.50mm. | BI01010001010000000000000515BI0100001145 | 7 | Sq.M. |
| 34 | 18 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete (b) With round base (v) 150 mm grip x 12 mm dia rod | BI01010001010000000000000515BI0100001146 | 10 | Each |
| 35 | 19 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured\nfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted and\nfixed complete .(iii) 300mm x 16mm dia. bolt. | BI01010001010000000000000515BI0100001147 | 4 | Each |
| 36 | 20 | Anodised aluminium barrel / tower / socket bolt (full covered) of approved\nmanufactured from extruded section conforming to I.S. 204/74 fitted and fixed\nwith cadmium plated screws: (v) 150mm long x 12mm dia. bolt. | BI01010001010000000000000515BI0100001148 | 6 | Each |
| 37 | 21 | Labour for taking out door and window frame including shutter for repair or\nreplacement of different parts of the frame & refixing the same including mending\ngood all damaes complete. (Concrete and brick work for mending damage will be\npaid separately) (a) Upto area 2.5 Sq.m | BI01010001010000000000000515BI0100001149 | 2 | Sq.M. |
| 38 | 22 | Taking out shutter of door and window, dismantling by parts (for repair or\nreplacement of damaged parts) , reassembling and refitting and rehanging same\nwith old fittings but with new screws as necessary. (Where different parts of\nsame shutter are renewed under different item, payment under item 73 will be\nmade once only).\n | BI01010001010000000000000515BI0100001150 | 2 | Sq.M. |
| 39 | 23 | Taking out door and window shutters and rehanging the same with old fittings. (a) With new iron screws. | BI01010001010000000000000515BI0100001151 | 11 | Sq.M. |
| 40 | 24 | Easing door and windows. | BI01010001010000000000000515BI0100001152 | 6 | Each |
| 41 | 25 | Taking out old iron hinges and fitting, fixing the same with new steel screws. (e) 100mm. Long butt hinge | BI01010001010000000000000515BI0100001153 | 10 | Each |
| 42 | 26 | M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S. flats and bars of windows fitted and fixed with necessary screws and lugs in ground floor. | BI01010001010000000000000515BI0100001154 | 0.6 | Qntl. |
| 43 | 27 | Applying two coats of decorative cement based paint of approved quality after preparing the surface including | BI01010001010000000000000515BI0100001155 | ||
| 44 | 27.01 | In Ground Floor | BI01010001010000000000000515BI0100001156 | 250 | Nos |
| 45 | 27.02 | In 1st Floor | BI01010001010000000000000515BI0100001157 | 150 | Nos |
| 46 | 28 | Applying two coats of exterior grade acrylic Primer of approved quality and brand on plastered or concrete surface. | BI01010001010000000000000515BI0100001158 | ||
| 47 | 28.01 | In Ground Floor | BI01010001010000000000000515BI0100001159 | 250 | Nos |
| 48 | 28.02 | In 1st Floor | BI01010001010000000000000515BI0100001160 | 150 | Nos |
| 49 | 29 | Applying two coats of Protective and Decorative Premium 100% Acrylic Emulsion Exterior paint of approved make and brand on walls, ceiling in first floor. | BI01010001010000000000000515BI0100001161 | ||
| 50 | 29.01 | In Ground Floor | BI01010001010000000000000515BI0100001162 | 150 | Sq.M. |
| 51 | 29.02 | In 1st Floor | BI01010001010000000000000515BI0100001163 | 150 | Sq.M. |
| 52 | 30 | Rendering the Surface of walls and ceiling with White Cement base WATER PROOF wall putty of approved make & brand.(1mm thick/two coat/smooth surface) | BI01010001010000000000000515BI0100001164 | 500 | Sq.M. |
| 53 | 31 | Applying Acrylic Emulsion Paint of approved make and brand on walls\nand ceiling including sand papering in intermediate coats including putty\n(to be done under specific instruction of Superintending Engineer) :\n(Two coats) | BI01010001010000000000000515BI0100001165 | 500 | Sq.M. |
| 54 | 32 | Priming one coat on timber or plastered surface with synthetic oil bound primer. | BI01010001010000000000000515BI0100001166 | 35 | Sq.M. |
| 55 | 33 | Applying two coat of painting over timber surface with best quality synthetic enamel paint | BI01010001010000000000000515BI0100001167 | 35 | Sq.M. |
| 56 | 34 | Applying Oil bound primer over metal surface including smoothening surface by sand papering etc. | BI01010001010000000000000515BI0100001168 | 20 | Sq.M. |
| 57 | 35 | Two coats of synthetic enamel paint with hi-gloss with any shade except white over metal surface. | BI01010001010000000000000515BI0100001169 | 20 | Sq.M. |
| 58 | 36 | Sanitary & Plumbing Item | BI01010001010000000000000515BI0100001170 | ||
| 59 | 37 | Supplying, PVC water storage tank with closed top with lid (Black)-Multilayer,1000 litre capacity | BI01010001010000000000000515BI0100001171 | 1 | Each |
| 60 | 38 | Supplying fitting and fixing 630 mm X 450 mm size in size white vitreous china wash basin of approved make with all necessary accessories and fittings | BI01010001010000000000000515BI0100001172 | 2 | Each |
| 61 | 39 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) | BI01010001010000000000000515BI0100001173 | 2 | Each |
| 62 | 40 | Supplying, fitting and fixing 635 mm X 395 mm X 420 mm Flat back urinal in white vitreous chinaware of approved make | BI01010001010000000000000515BI0100001174 | 1 | Each |
| 63 | 41 | Supplying, fitting and fixing stainless steel sink complete with waste\nfittings, sink Coupling, Waste pipe etc and two coats of painting of C.I. brackets(.630 mm X 550 mm X 180 mm) | BI01010001010000000000000515BI0100001175 | 2 | Each |
| 64 | 42 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. | BI01010001010000000000000515BI0100001176 | 1 | Each |
| 65 | 43 | Supplying, fitting and fixing Orissa pattern water closet in white glazed\nvitreous chinaware of approved make in position complete excluding 'P' or\n'S' trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm\n | BI01010001010000000000000515BI0100001177 | 1 | Each |
| 66 | 44 | Supplying, fitting & fixing Chromium plated concealed Stop Cock (Equivalent to Code No.514(A) & Model- Tropical/Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001178 | 3 | Each |
| 67 | 45 | Supplying, fitting & fixing Chromium plated concealed Bib Cock long body with Flange with Aerator (Equivalent to Code No.512(A) & Model- Tropical/Sumthing Special of ESSCO or similar brand). | BI01010001010000000000000515BI0100001179 | 3 | Each |
| 68 | 46 | Supplying, fitting & fixing Chromium plated concealed angular Stop Cock with wall Flange (Equivalent to Code No.5053 & Model- Florentine of Jaquar or similar brand). | BI01010001010000000000000515BI0100001180 | 3 | Each |
| 69 | 47 | Supplying, fitting and fixing C.P. over brass, 25 mm dia. and 600 mm long towel rail with two brackets. | BI01010001010000000000000515BI0100001181 | 3 | Each |
| 70 | 48 | Supplying, fitting and fixing 450 mm X 125 mm ordinary type with 5.5 mm sheet glass shelf with aluminium guard rails | BI01010001010000000000000515BI0100001182 | 3 | Each |
| 71 | 49 | Supplying, fitting and fixing Fibre glass liquid soap container | BI01010001010000000000000515BI0100001183 | 3 | Each |
| 72 | 50 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. | BI01010001010000000000000515BI0100001184 | 3 | Each |
| 73 | 51 | Supplying, fitting & fixing UPVC pipes A- Type and fittings with all necessary clamps nails, incl making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc and mending good damages incl joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) and fixing with wall bracket as directed and as specified. | BI01010001010000000000000515BI0100001185 | ||
| 74 | 51.01 | UPVC Pipes : 110 mm. Dia. | BI01010001010000000000000515BI0100001186 | 25 | Meter |
| 75 | 51.02 | UPVC Fittings : Bend 87.5 degree - 110 mm. Dia. | BI01010001010000000000000515BI0100001187 | 4 | Each |
| 76 | 51.03 | UPVC : Shoe 110 mm. Dia. | BI01010001010000000000000515BI0100001188 | 4 | Each |
| 77 | 52 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 with all necessary accessories and fittings | BI01010001010000000000000515BI0100001189 | ||
| 78 | 52.01 | 50 mm. dia medium quality | BI01010001010000000000000515BI0100001190 | 5 | Meter |
| 79 | 52.02 | 25 mm. dia medium quality | BI01010001010000000000000515BI0100001191 | 35 | Meter |
| 80 | 53 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 with all necessary accessories and fittings | BI01010001010000000000000515BI0100001192 | ||
| 81 | 53.01 | 15mm. dia medium quality | BI01010001010000000000000515BI0100001193 | 10 | Meter |
| 82 | 54 | Supplying, fitting & fixing gunmetal wheel valve of approved brand and make tested to 21 kg/sq.cm. | BI01010001010000000000000515BI0100001194 | 2 | Each |
| 83 | 55 | Supplying, fitting & fixing approved 100 mm dia. patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. | BI01010001010000000000000515BI0100001195 | 2 | Each |
| 84 | 56 | R.C.C. well ring made with cement concrete 1:1.5:3 with stone chips and 0.80% reinforcement (including the cost of shuttering and reinforcement) cast at site fitted and fixed in position after proper curing true to plumb in the well including jointing with\ncement mortar 1:2 complete as per direction.\n | BI01010001010000000000000515BI0100001196 | 3 | Meter |
| 85 | 57 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) | BI01010001010000000000000515BI0100001197 | ||
| 86 | 57.01 | 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. | BI01010001010000000000000515BI0100001198 | 4 | Sq.M. |
| 87 | 58 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes | BI01010001010000000000000515BI0100001199 | ||
| 88 | 58.01 | (i) Pakur Variety | BI01010001010000000000000515BI0100001200 | 0.5 | Cu.M. |
| 89 | 59 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing\nand direction. | BI01010001010000000000000515BI0100001201 | ||
| 90 | 59.01 | Tor steel/Mild Steel (SAIL/ TATA/RINL) | BI01010001010000000000000515BI0100001202 | 0.02452 | M.T. |
| 91 | 60 | Earthwork in Excavation of foundation trenches or drains, in all sorts of soil, Depth of excavation upto 1500mm | BI01010001010000000000000515BI0100001203 | 0.14 | %CuM |
| 92 | 61 | Filling in Foundation or Plinth by silver sand by layer not exceeding 150mm apart | BI01010001010000000000000515BI0100001204 | 0.02 | %CuM |
| 93 | 62 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) | BI01010001010000000000000515BI0100001205 | ||
| 94 | 62.01 | Specification | BI01010001010000000000000515BI0100001206 | 7 | Sq.M. |
| 95 | 63 | 250mm thick Brickwork with 1st Class brick in cement mortar 1:4 in foundation and plinth | BI01010001010000000000000515BI0100001207 | 0.4 | Cu.M. |
| 96 | 64 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-In charge | BI01010001010000000000000515BI0100001208 | 7 | Sq.M. |
| 97 | 65 | Painting block letters or digits in Black Japan or any\napproved paint as per direction. | BI01010001010000000000000515BI0100001209 | ||
| 98 | 65.01 | (Size 2 cm. to 2.5 cm.) | BI01010001010000000000000515BI0100001210 | 900 | Each |
| 99 | 66 | Dismantiling of existing damage wirings, Switch boards, lights, fans, SPN DB, MS and lowering of existing Ceiling Fans, lights and refixing of existing ceiling fans, lights at the point by necessary screws etc. as per direction of E.I.C. | BI01010001010000000000000515BI0100001211 | 1 | Job |
| 100 | 67 | Distribution wiring in 1.1 KV Single core Stranded 'FR\" PVC insulated & unsheathed copper wire (Make- Finolex/KEI/Havells) in 20 mm size PVC rigid conduit \"FR\" (Precision make) incl. Necy. Fittings as required. | BI01010001010000000000000515BI0100001212 | ||
| 101 | 67.01 | a) 2x22/0.3 (1.5 sqmm) + 1x22/0.3 (1.5 sqmm) as Ecc | BI01010001010000000000000515BI0100001213 | 15 | R.M. |
| 102 | 67.02 | b ) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as Ecc | BI01010001010000000000000515BI0100001214 | 43 | R.M. |
| 103 | 67.03 | c ) 2 x 84/0.3 (6 sqmm) + 1 x 56 /0.3 ( 4 sqmm) as Ecc | BI01010001010000000000000515BI0100001215 | 25 | R.M. |
| 104 | 68 | Supplying and Fixing 240 V, 32 A DP Sheet Steel Main Switch on flat iron frame on wall.Make- Havells. | BI01010001010000000000000515BI0100001216 | 1 | Each |
| 105 | 69 | Supply & fixing (2+6) Way SPN Distribution board double door with 1 no. 40A, 240 V DP Isolator as incommer and 6 nos. 6-10 A, 240 V SP MCBs per way having breaking capacity of each mcb 10 kA & c characteristics on din rail as outgoing.Make- ABB (Enclosure SCHM6).As per GS. | BI01010001010000000000000515BI0100001217 | 2 | Set |
| 106 | 70 | Distribution wiring in 2x22/0.3 (1.5 sqmm) Single core stranded \"FR\" PVC insulated and unsheathed copper wire (Make- Havells/Finolex/KEI) in 20 mm size PVC rigid conduit \"FR\" (precision make) with 1x22/0.3 (1.5 sqmm) Single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, to light/fan/call Bell point with Piyano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size \"Ph & N\" copper bar incl. bakelite/perspex (wall matching color ) top cover 3 mm thick and incl. 175mm x 100mmx 65 mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.Avg. Run: 6 M | BI01010001010000000000000515BI0100001218 | 30 | Pt |
| 107 | 71 | Distribution wiring in 2x22/0.3 (1.5 sqmm) Single core stranded \"FR\" PVC insulated and unsheathed copper wire (Make- Havells/Finolex/KEI) in 20 mm size PVC rigid conduit \"FR\" (precision make) with 1.1 kv grade 1x22/0.3 (1.5 sqmm) Single core stranded \"FR\" PVC insulated & unsheathed copper wire as ECC, to 5 A 3 pin flush type plug socket & Piyano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/perspex (wall matching color ) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. | BI01010001010000000000000515BI0100001219 | ||
| 108 | 71.01 | a) on board | BI01010001010000000000000515BI0100001220 | 9 | Pt |
| 109 | 71.02 | b) Avg.run-6 mtr. | BI01010001010000000000000515BI0100001221 | 4 | Pt |
| 110 | 72 | S & F 240 V, 20A, plug socket with separate 20 A Piano key type switch (Make-Anchor) on sheet metal switch board embeded in wall incl. S & F 150x100x65mm MS(16SWG) switch board and bakelite/perspex top cover of 3mm thick by brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connection as required. | BI01010001010000000000000515BI0100001222 | 4 | Each |
| 111 | 73 | Supply & Fixing of 20 W ,240 V 4 ft. long Commercial type single LED tube with fittings complete set with all accressroies directly fixed on wall/ceiling by screws.Make- Philips, Model nos. Smart Bright, type- BN021C LED20S PSU CW GR S2. or equivalent make of Havells/ Cropmton.As per direction of the E.I.C. | BI01010001010000000000000515BI0100001223 | 12 | Set |
| 112 | 74 | Supply & Fixing of 9 watt, 240 V , 50 Hz LED bulb in wall bracket.Make-Mescab. | BI01010001010000000000000515BI0100001224 | 5 | Each |
| 113 | 75 | Extra for suspension exceeding 25cm with S&F additional 1 no. 20 mm dia EI conduit(14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5 sqmm.) flexible copper wire of 1.10 mt. length. | BI01010001010000000000000515BI0100001225 | 4 | R.M. |
| 114 | 76 | S & Fixing of 250 V Socket type Fan Regulator(Step type)(make- Anchor)on existing sheet metal switch board with bekelite/perspex top cover by screw after making houseing for regulator knob by cutting bakelite/perspex top cover incl.making necy.connections etc. | BI01010001010000000000000515BI0100001226 | 6 | Each |
| 115 | 77 | Supplying ,Delivery & Fixing of 1200 mm sweep ceiling fan complete with blades, canopy,fork, rubber, bush etc. incl. S&F connecting wire for down rod upto 30cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5sq. mm PVC flexible copper wire.make- USHA, Model- Striker Plus, Colour-White. or equivalent make of Orient/Havells/ Cropmton.As per direction of the E.I.C. | BI01010001010000000000000515BI0100001227 | 6 | Each |
| 116 | 78 | S & F 240 V, 3 nos. 6A & 1 no. 20A, plug socket with separate 3 nos. 6 A, & 1 no. 20 A Piano key type switch, Indicator and 20 A Switch type SP MCB (Make-Anchor) on sheet metal switch board embeded in wall incl. S & F 240x200x65mm MS(16SWG) switch board and bakelite/perspex top cover of 3mm thick by brass screws afyter making housing for switch by cutting bakelite/perspex cover and making necessary connection as required.Computer board. | BI01010001010000000000000515BI0100001228 | 1 | Set |
| 117 | 79 | Supplying and Fixing 240V, 130 W, 400 mm wall fan directly fixed on wall by screws. Etc as required.Make- Havells, Model-Platina HS. Or equivalent make of Cropmton/ USHA.As per direction of the E.I.C. | BI01010001010000000000000515BI0100001229 | 1 | Each |
| 118 | 80 | Supply and fixing of 300 mm exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and proiding necy. Length of PVC insulated wire and making connection for exhaust.Make- USHA /EPC/Crompton/Havells.As per direction of the E.I.C. | BI01010001010000000000000515BI0100001230 | 5 | Each |
| 119 | 81 | supply and fixing AI louver shutter on wall with necy . Bolts & nuts ( 6mm dia x 62 mm long).for 300 mm exhaust fan. | BI01010001010000000000000515BI0100001231 | 5 | Each |
| 120 | 82 | Supply & Fixing of 45 W, 240 V LED flood/street light on the roof/wall of the header arm of the GI pole. Make- Mescab, cat ref- MSL 10 45W. or equivalent make of Havells / Crompton/Philips.As per direction of the E.I.C. | BI01010001010000000000000515BI0100001232 | 1 | Each |
| 121 | 83 | Fixing only outdoor/street light type fluorescent light fitting or MV light fitting complete with all accessroies to be fixed / projected from the wall of the building incl. making holes/providing clamping arrangement & nece. GI reducer as required.S&F 40 mm GI pipe (ISI-Medium) quality 1.5mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. | BI01010001010000000000000515BI0100001233 | 1 | Each |
| 122 | 84 | Supply and installation of Single phase, 1/2 H.P., 240 V, 50Hz, Centrifugal Monobloc Heavy duty type Pump Motor at the existing places with necy. Nuts, bolts, washers etc. as required and making connection with existing point by S&F 20 A, 240 V plug top as per direction of E.I.C.Make- KSB,Model no.-Delite-II. | BI01010001010000000000000515BI0100001234 | 1 | Item |
| 123 | 85 | Excavation of Soil for installation of Earth Electrode and filling & ramming. | BI01010001010000000000000515BI0100001235 | ||
| 124 | 85.01 | a) For Soft Soil.. | BI01010001010000000000000515BI0100001236 | 2 | Cu.M. |
| 125 | 86 | Extra for treatment of soil by using salt & charcoal or coke for plate electrode. | BI01010001010000000000000515BI0100001237 | 1 | Item |
| 126 | 87 | Earthing with 50mm dia G.I pipe 3.64mm thick x 3.04 Mts.long & 1x4SWG GI(Hot Dip) wire (4Mts long),13mm dia x80mm long GI bolts ,double nuts,double washers incl. S& F 15mm Dia GI pipe protection (1Mts long)to be filled with bitumen partly under the ground level and partly above the ground level driven to an average depth of 3.65Mts.below the ground level by ISI-Medium GI pipe. | BI01010001010000000000000515BI0100001238 | 1 | Each |
| 127 | 88 | Supply and Installation of 20 W, 240 V UV based Water purifier by necessary S&F nuts , bolts etc. In wall.Make- Aquagurd /Kent / Pure It. | BI01010001010000000000000515BI0100001239 | 1 | LS |
AI Tender Summary
Tender Timeline
Nov 29, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 16, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender