Sales : +91-777 804 8217
| Name of Work: CERTAIN B&R AND E&M REPAIR WORKS AT MARRIED AND OTM ACCN IN DAD RESIDENTIAL AREA AND AAO SHILLONG UNDER GE SHILLONG. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed. | 3.75 | CUM | |
| 2 | 2 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate ) as in plinth protection / hardstanding, finishing surface even & smooth without using extra cement including necessary formwork etc complete all as specified and directed.\n | 50 | SQM | |
| 3 | 3 | M&L for 40mm thick PCC (1:2:4) type B-1 using 20mm graded aggregate as in flooring, finished even and smooth using extra cement, the floor shall be laid in alternate bays n. exc. 4 Sqm, and divided in to glass dividing strip, complete all as specified and directed. (Note - Glass dividing strip shall be measured and paid separately) \n\n\n \n | 10 | SQM | |
| 4 | 4 | Supply only glass dividing strips, 3 mm thick 38 mm with inserted in position to confirm to design complete all as specified and directed. | 5 | RM | |
| 5 | 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed by Engineer-in- Charge. | 189 | SQM | |
| 6 | 6 | M&L for Non-skid ceramic colour, joint free tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. | 60 | SQM | |
| 7 | 7 | All as per above item No 6.00 but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:4) complete all as specified and as directed. | 9 | SQM | |
| 8 | 8 | M&L for Glazed ceramic colour tiles of size 350 x 250 x 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete all as specified and as directed. | 70 | SQM | |
| 9 | 9 | M&L for Vitrified ceramic tiles, light shade, 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors, set and jointed in cement slurry and pointed in white or colour cement to match over screed bed 15 mm thick in cement sand mortar (1:4) complete all as specified and directed | 50 | SQM | |
| 10 | 10 | All as per above item No 9.00 but as in vertical surfaces such as skirting & dado over and including 10mm thick backing course using cement sand mortar (1:4.) complete all as specified and directed | 10 | SQM | |
| 11 | 11 | M&L for Marble of green shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking plaftform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in CM (1:4) complete all as specified and directed | 5 | SQM | |
| 12 | 12 | Dismantling wall/ceiling boards of any description (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets. | 50 | SQM | |
| 13 | 13 | S&F 4mm thick Non asbestos fibre cement Bldg Board fixed with screws to timber frame work as in ceiling complete all as specified and as directed. | 50 | SQM | |
| 14 | 14 | Dismantling timber scantling over 40 Sqcm in section in any position (unframed work) complete all as specified and as directed. | 0.5 | CUM | |
| 15 | 15 | M&L for 2nd class hard wood as in scantling, clean sawn, timber fixed complete all as specified and directed. | 0.5 | CUM | |
| 16 | 16 | All as per item No 14.00 here in above but in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section complete all as specified and directed. | 100 | RM | |
| 17 | 17 | M&L for 2nd class hard wood Plain fillets square rectangular or tringular in section clean sawn on one face or edge in section wrought secured with nails or brads sectional area exc 13 Sqcm but n.exc 25 Sqcm complete all as specified and as directed. | 50 | RM | |
| 18 | 18 | M&L 2nd class hard wood Plain fillets bullnosed , splayed, chamfered , or rounded on one face or edge in section wrought secured with nails or brads sectional area exc 06 Sqcm but n.exc 13 Sqcm complete all as specified and as directed. | 150 | RM | |
| 19 | 19 | Dismantling boarding of any description and fixed any position with nails complete.. | 30 | SQM | |
| 20 | 20 | M&L for 2nd class hardwood, 20 mm thick boarding, planed one side with butt joints fixed with nails as in eaves board / fascia complete all as specified and directed. | 20 | SQM | |
| 21 | 21 | S&F block board 18/19mm thick, grade 2 quality, interior grade, commercial type, with external teak wood lipping 6mm thick fixed with screws to timber frame work complete all as specified and directed | 10 | SQM | |
| 22 | 22 | M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats creosote oil complete all as specified and directed. | 40 | SQM | |
| 23 | 23 | M&L for Synthetic enamel paint two coats over a coat of pink primer on new wooden surfaces n.exc. 10 Cm width or girth including preparation of wooden surfaces complete all as specified and as directed. | 15 | XRM | |
| 24 | 24 | Taking down chowkats or frames n. exc. 1.5 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed. | 10 | EACH | |
| 25 | 25 | Taking down chowkats or frames exc. 1.5 Sqm but n. exc. 4 Sqm each (without taking off shutters from the frame) and removing from site complete all as specified and directed. | 10 | EACH | |
| 26 | 26 | Taking down shutters of any description n. exc. 1 Sqm each and removing from site complete all as specified and directed. | 5 | EACH LEAF | |
| 27 | 27 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and removing from site complete all as specified and directed. | 7 | EACH LEAF | |
| 28 | 28 | Taking down shutters of any description exc. 1 Sqm and n. exc. 2 Sqm each and refixing in same opening complete all as specified and directed. | 5 | EACH | |
| 29 | 29 | M&L for 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and directed by Engineer-in-Charge. | 0.73 | CUM | |
| 30 | 30 | S&F 35 mm thick, 2nd class hard wood, factory made ,plain framed, panelled shutter (any number of panels) with lock rail and panel of 9 mm BWP commercial type well seasoned chemically pressure treated fitted to chowkat complete all as specified and directed. | 12 | SQM | |
| 31 | 31 | S&F 35mm thick, Flush shutters, factory made ,solid core construction, with block board core and plywood face panels, commercial type on both sides including provision of suitable blocks for taking mortice locks , latches or other fittings complete all as specified and as directed. | 12 | SQM | |
| 32 | 32 | S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, factory made, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed. | 21.6 | SQM | |
| 33 | 33 | S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, factory made, open rebated and prepared to receive glass or gauge with sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (b) complete all as specified and directed. | 11 | SQM | |
| 34 | 34 | S&F 30 mm thick, 2nd class hard wood, glazed and skeleton shutter, factory made, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (b) complete all as specified and directed. | 5 | SQM | |
| 35 | 35 | S&F factory made pre laminated solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with single piece extruded pvc profile both side prelam PVC sheet 'C' channel having a 5mm thick PVC sheet strip of 20mm width stuck inside with solvent cement, forming stiles, and 5mm thick both side prelam single piece extruded pvc profile for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelam 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified and shown on drawing given in SSR Part II. The width of stiles & rails shall be in proportion to the width of the door shutter as given in SSR Part I complete all as specified and directed | 6.7 | SQM | |
| 36 | 36 | S&F pre laminated solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam single piece extruded pvc profile and edgs will be painted to match with prelam sheet , PVC sheet are to be reinforced with 19x19mm MS square tube EPDM rubber gasket weather seal shall be provided through out the frame. The profile shall be mitre cut at two corners and joint by insrting 2 nos of 150mm long backets of 15mmx15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed and fixing in opening as per specification & drawing complete all as specified and directed. | 24.75 | Rm | |
| 37 | 37 | S&F Mild Steel Butt hinges, medium weight, cold rolled, 100mm size ISI Marked complete all as specified and directed. | 66 | Each | |
| 38 | 38 | S&F Mild Steel Butt hinges, medium weight, cold rolled, 75mm size ISI Marked complete all as specified and directed. | 60 | Each | |
| 39 | 39 | S&F cadmium plated ,Stainless Steel Butt hinges, medium weight, cold rolled, 100 mm size ISI Marked fixed with screws / welded to frame complete all as specified and directed. | 15 | Each | |
| 40 | 40 | S&F tower bolts, Aluminium anodized, 150 mm size, barrel type of extruded section, complete all as specified and as directed. | 28 | Each | |
| 41 | 41 | S&F tower bolts, Aluminium anodized, 125 mm size, barrel type of extruded section, complete all as specified and as directed. | 40 | Each | |
| 42 | 42 | S&F handles , Aluminium anodized, cast type 150 mm size, cast type, complete all as specified and as directed. | 28 | Each | |
| 43 | 43 | S&F handles , Aluminium anodized, cast type 100 mm size, cast type, complete all as specified and as directed. | 40 | Each | |
| 44 | 44 | S&F 300 mm long, Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed | 10 | Each | |
| 45 | 45 | S&F Hasp and staple, 100 mm safety type aluminium anodised, with mild steel hinge pin , including bolt to hinge plate and fixed with screws complete as specified and as directed. | 5 | Each | |
| 46 | 46 | S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor , overall length of plate 140 mm complete as specified and as directed. | 5 | Each | |
| 47 | 47 | S & F Continuous (piano) hinges,mild steel, bright finish or electrogalvanised with width of flap ( when open) 30 mm complete all as specified and as directed. | 20 | Rm | |
| 48 | 48 | S&F Magnet catcher for cup board shutter, brass body and striking plate including letting in complete all as specified and as directed. | 10 | EACH | |
| 49 | 49 | S&F in repair Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) as in covering to door shutter complete all as specified and as directed.\n \n | 10 | SQM | |
| 50 | 50 | Hacking out old broken glass ( any thickness, size,quality or description) from wooden frame including taking out old wooden beads etc complete all as specified and as directed.\n\n \n\n\n \n | 5 | SQM | |
| 51 | 51 | S&F Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and as directed.\n\n \n\n\n \n | 5 | SQM | |
| 52 | 52 | S&F figured glass 3 mm thick, pin head type and glazing with oil putty or wooden beads in square n.exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and as directed.\n\n . | 3 | SQM | |
| 53 | 53 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all asspecified and as directed | 20 | SQM | |
| 54 | 54 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all asspecified and as directed | 20 | SQM | |
| 55 | 55 | Supply and fixing ,in repair peg set of six, chromium plated with CP screws completed all as specified and directed.Make- Prayag cat part no. BEA-30 or equivalent of Jaquar / Pearl /Hindware. | 10 | EACH | |
| 56 | 56 | Supply and fix, in repair 25 mm dia aluminium drapery rod with wooden finish , decorative including brackets, decorative finials at both ends and curtain rings 8 nos (minimum) in one opening complete all as specified and directed. | 20 | RM | |
| 57 | 57 | S&F in repair venetian blind curtain made out of aluminum studs for holding the vertical strips including brackets with roller and revolting swinging decorative threads 50 mm thick vertical nylon blinds made out of decorative strips, metallic weights decorative PVC connectors complete all as specified and as directed. | 10 | SQM | |
| 58 | 58 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. | 100 | SQM | |
| 59 | 59 | Dismantling plain or corrugated steel sheeting any guage thickness roof covering complete all as specified and directed. | 120 | SQM | |
| 60 | 60 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed | 100 | SQM | |
| 61 | 61 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed | 20 | SQM | |
| 62 | 62 | M&L for taking down existing sunken slab treatment from the sunken portion and cleaning the surfaces by washing down with water and rubbish off the premises.\n(a) Cleaning and filling cracks with sealing compound, brushing neat with neat cement slurry @ 3.00 kg/ sqm and grouting in 25 mm thick plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) over suncken slab portion and finishing the top surfaces even and smooth without using extra cement .\n(b) M&L for applying two coats of acrylic cementitious water proofing coating (Dr Fixit pidifin 2K manufactured by M/s Pidilite industries Ltd or equivalent) and followed by a overlay protective 15 mm thick screed/ rendering in cement sand mortar (1:3) along with liquid water proofing at appropriate ratio of approved make on top surfaces of sunken slab after preparation complete all as specified and as directed. Note:- Method of application of acrylic cementitious water proofing coating is followed as per manufacturers instructions. | 10 | SQM | |
| 63 | 63 | M&L for 25 mm thick cement concrete type B-0, 1:2:4 ( using 12.5 mm graded stone aggregate) in any position including necessary formwork etc complete all as specified and directed. | 25 | SQM | |
| 64 | 64 | M&L for Roof treatment with polymeric water proofing membrane as under including taking out old unserviceable APP membrane with screed bed:-\n(a) Cleaning and removal of all scale of dirt etc from RCC roof top by using wire brush, water etc and applying cement slurry @3Kg/Sqm.\n(b) 15mm thick cement screed bed in CM 1:4. \n(c) Applying a coat of bituminous primer @ 0.25 ltr/Sqm and allow to dry.\n(d) Supply and laying APP membrame 3mm thick (minimum), weighing 3.5 Kg/m² reinforced with polyster non woven fabric (weighing not less than 160 gms/Sqm) shall be applied by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction complete all as specified and as directed.\n(e) One coat of aluminium paint over polymeric water proofing membrane @ 0.11 Kg/m². | 260 | SQM | |
| 65 | 65 | Taking up or down steel tubing with connections of 15 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed. | 60 | RM | |
| 66 | 66 | S&F GI tubing 15mm dia medium grade with all necessary GI fittings ,fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed. | 50 | RM | |
| 67 | 67 | Refixing of old serviceable steel tubing obtained from taking down pipes against serial item no. 65.00 i.e. of 15mm bore but with new GI fittings in new or old position ( wall, ceiling or floor) complete all as specified and as directed | 10 | RM | |
| 68 | 68 | Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and directed. | 50 | RM | |
| 69 | 69 | S&F GI tubing 20 mm dia medium grade with all necessary GI fittings, fixed in wall, ceiling or floor with necessary clamp or hook complete all as specified and as directed. | 40 | RM | |
| 70 | 70 | Refixing of old serviceable steel tubing obtained from taking down pipes against serial item no. 68.00 i.e. of 20mm bore but with new GI fittings in new or old position ( wall, ceiling or floor) complete all as specified and as directed | 10 | RM | |
| 71 | 71 | Cutting chases, pinning in. making good to facings where required and pointing in cement sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete as specified and as directed. | 40 | RM | |
| 72 | 72 | Dismantling PVC water storage tank of capacity exc 500 ltr but not exc 1000 ltr etc complete all as specified and directed. | 12 | EACH | |
| 73 | 73 | S&F Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed. | 2 | EACH | |
| 74 | 74 | S&F rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed. | 10 | EACH | |
| 75 | 75 | Disconnecting existing water storage tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity exc 500 litres & not exc 1000 litres with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. (Note : Cleaning work etc. shall be measured and paid separately.) | 20 | EACH | |
| 76 | 76 | M&L for Cleaning & removing all scale and dirt etc from existing old servicable water storage tanks & mouths of circulating pipes etc of capacity exc 500 litres but not exc 1000 litres , with gunny bags, sand cleaning with fresh water and bleaching powder all as specified and directed by Engineer in Charge | 20 | EACH | |
| 77 | 77 | Disconnecting existing water storage tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and refixing in position of capacity exc 1000 litres but not exc 2000 litres with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia all as specified and directed. (Note : Cleaning work etc. shall be measured and paid separately.) | 20 | EACH | |
| 78 | 78 | M&L for Cleaning & removing all scale and dirt etc from existing old servicable water storage tanks & mouths of circulating pipes etc of capacity exc 1000 litres but not exc 2000 litres , with gunny bags, sand cleaning with fresh water and bleaching powder all as specified and directed by Engineer in Charge | 20 | EACH | |
| 79 | 79 | S&F in repair 20mm bore Ball valves high, pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 gms ) complete all as specified and as directed . | 20 | EACH | |
| 80 | 80 | S&F in repair PVC water storage tank cover suitable for 500 to 1000 ltr capacity etc complete all as specified and as directed. | 10 | EACH | |
| 81 | 81 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. | 5 | EACH | |
| 82 | 82 | S&F in repair Pillar tap,15 mm bore, brass chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge Make:- Jaquar Cat part No.CON-021KN or equivalent model from make Prayag / Hindware. | 5 | EACH | |
| 83 | 83 | S&F in repairs CP Bib tap 15 mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe complete all as specified and as directed. . Make:- Make:- Jaquar Cat part No.CON-047KN or equivalent model from make Prayag / Hindware. | 10 | EACH | |
| 84 | 84 | S&F in repair 15 mm bore brass chromium plated wall mixer (3 in 1) complete all as specified and directed. Make: Jaquar Model No CON 281KN, HSH 1929 & OHS 1989/ Marc ES547A & ES 531 (Telephone shower) ES 549 (shower) ES 536 (Shower)/Pearl ARI 016 (wall mixer) HS 470 (hand shower with tube) SHA 512 (Arm) SHP 525 (OH shower) | 1 | EACH | |
| 85 | 85 | S&F in repair 15 mm bore CP central hole basin mixer fancy type complete all as specified and directed. Make : Jaquar CON 059 KN or equivalent modal of Prayag / Hindware. | 3 | EACH | |
| 86 | 86 | S&F in repair angle cock, brass chromium plated, fancy type, with wall cap with round headed knob, suitable for 15mm bore iron pipe (2 in 1) complete all as specified. Make:- Marc ESSCO ES 553 Pearl ARI 005 / Jaquar CON 167KN . | 10 | EACH | |
| 87 | 87 | S&F in repair 15mm bore stop cock cast copper alloy, fancy type, chromium plated, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.Make:- Jaguar Cat part No.SQT-513BKN or equivalent model from make Prayag / Hindware. \n \n\n\n \n | 5 | EACH | |
| 88 | 88 | S&F in repair Bib tap of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. | 30 | EACH | |
| 89 | 89 | S&F in repair Stop valve of 15mm dia in PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. | 5 | EACH | |
| 90 | 90 | S&F in repair angular Stop valve of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. | 10 | EACH | |
| 91 | 91 | S&F in repair Health Faucet with 1 mtr metalic expandable tube & hook complete all as specified and directed. Make : Jaquar model No. ALDCHR 585/ Prayag model No BEA 41/Pearl HF-133, HF 134. | 8 | EACH | |
| 92 | 92 | S&F in repair 20 mm dia brass chromium plated tubular towel rail 'D' type 60 cm long between flanges, including one pair of fixing brackets complete all as specified and directed.Make:- Jaquar Cat part No.ACN111NM or equivalent model from make Prayag / Hindware. | 5 | EACH | |
| 93 | 93 | S&F in repair towel Rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed. | 5 | EACH | |
| 94 | 94 | S&F in repair Bevelled edge mirror, of size 600mm x 450mm x5mm of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as directed. | 10 | EACH | |
| 95 | 95 | S&F in repair 6mm thick polished glass shelf of size 400 mm x 100 mm with two nos chromium plated holder, brackets fixed to wall complete all as specified and as directed. Make:- Jaquar Cat part No.CAN-1171N or equivalent model from make Prayag / Hindware. | 5 | EACH | |
| 96 | 96 | S&F in repair shelf of PTMTof 450 mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and as directed.Make:- Prayag Cat part No.191 or equivalent model from make Pearl/ Hindware. | 10 | EACH | |
| 97 | 97 | S&F in repairs PVC connection 15mm size, 450mm long with PTMT nuts complete all as specified and as directed. | 10 | EACH | |
| 98 | 98 | S&F in repair 32 mm bore PTMT waste pipe, ISI marked, for wash hand basin complete all as specified and directed. | 20 | EACH | |
| 99 | 99 | S&F in repair for grating doom 100 mm dia of PTMT (minimum weight 25gms), ISI marked, complete all as specified and directed.Make:- Prayag / Pearl/ Hindware. | 10 | EACH | |
| 100 | 100 | S&F in repair kitchen sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914 mm x 460 mm x 203 mmbowl size 405 mm x 354 mm x 203 mm complete all as specified and directed.Make:- Prayag cat part no. 1239D or equivalent make of Nirali / Hindware | 2 | EACH | |
| 101 | 101 | S&F in repair kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 600mm x 750mm x 250mm fixed to wall with brass screws etc complete all as specified and as directed.Make:- Cat part no. P-330 or equivalent make of Hindware / Bluestar | 4 | EACH | |
| 102 | 102 | S&F in repair PVC (Plastic polymer flushing Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge .Make:- Prayag / Pearl/ Hindware. | 10 | EACH | |
| 103 | 103 | S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed by Engineer-in-Charge .Make:- Prayag / Pearl/ Hindware. | 3 | EACH | |
| 104 | 104 | S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag / Pearl / Hindware. | 4 | EACH | |
| 105 | 105 | S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including PVC water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern etc complete all as specfied and directed. Make:- Prayag / Cera / Hindware. | 4 | EACH | |
| 106 | 106 | S & F in repair 110 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed .Make:- Prince / Supreme. | 50 | RM | |
| 107 | 107 | S & F in repair 75 mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe complete all as specified and directed .Make:- Prince / Supreme. | 30 | RM | |
| 108 | 108 | S & F in repair 75 mm bore PVC (SWR) vent cowl complete all as specified and directed. Make:- Prince / Supreme. | 10 | EACH | |
| 109 | 109 | S & F in repair 110 mm bore PVC (SWR) bend of any radius with access door complete all as specified and directed.Make:- Prince / Supreme.\n \n | 10 | EACH | |
| 110 | 110 | S & F in repair 110 mm bore PVC (SWR) reducer complete all as specified and directed. Make:- Prince / Supreme.\n\n \n\n\n \n | 10 | EACH | |
| 111 | 111 | S&F in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal complete all as specified and as directed.Make:- Prince / Supreme. | 10 | EACH | |
| 112 | 112 | S&F in repair 110mm dia PVC (SWR) fioor trap including jointing to pipe complete all as specified and directed.Make:- Prince / Supreme. | 10 | EACH | |
| 113 | 113 | Demolition of RCC of any description and in any position not otherwise specifically provided for including removal of debris from site etc complete all as specified and directed. | 1 | Cum | |
| 114 | 114 | M&L for Mild steel TMT deformed bars, 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality confirming to Fe 500D complete all as specified and directed. | 100 | KG | |
| 115 | 115 | M&L for precast RCC 1:2:4 type B-1 (using 20mm graded stone aggregate)as in cover slab, landing etc set in CM (1:6) including necessary form work complete all as specified and directed. | 0.5 | CUM | |
| 116 | 116 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc.complete all as specified and as directed. | 15 | CUM | |
| 117 | 117 | M&L for Sand filling under floors or in foundations etc including watering and consolidation complete all as specified and as directed.\n\n \n | 2.5 | CUM | |
| 118 | 118 | M&L for Pre polished factory made pavement chequered cement concrete tiles of size 200 X 200 X 25 mm thick of approved design and colour , set jointed and pointed in neat cement slurry with grey cement and pigment over and including 20 mm thick screed bed in cement sand mortar (1:6) complete all as specified and as directed. | 80 | SQM | |
| 119 | 119 | M&L for Machine vibratory pressed precast concrete pre-polished interlocking paver block any shape and size and colour, confirming to IS 15658-2006 of 60 mm thickness , M-35 Grade complete all as specified and as directed.\n\n\n \n\n\n \n | 15 | SQM | |
| 120 | 120 | M&L for providing and laying precast Factory made kerb stones of any size and section as approved , M-25 grade cement concrete, in position to the required line level and curvature, jointed with cement sand mortar (1:4) complete all as specified and as directed. | 1 | CUM | |
| 121 | 121 | Cleaning of SWG Pipe 100/200 mm internal dia of depth upto 1 meter by rodding or by using pressure pump completely including manholes and removal of sludge to a distance exc. 1.5 and n exc. 5.0 km outside MOD land complete all as specified and as directed | 200 | RM | |
| 122 | 122 | Dewatering and taking out/removal of sludge, waste/foreign materials from soakage well or sewage pit using mechanical pump and disposal of raw water/effluent/sludge/waste/foreign materials by burying underground borrow pit of suitable size and covering the pit with earth or earth mixed rubbish with spreading bleeching powder @ 1Kg per pit for disinfection purpose and removing surplus soil to a distance n.exc 50m complete all as directed by Engineer-in-Charge.\nNote: (i) Measurement of sludge (solid/semi-solid) shall be taken after draining out of effluent/water over the accumulated sludge.\n(ii) Cost of earthwork in excavation for earth pit and spreading of bleaching powder shall deemed to be included in the unit rate quoted by the tenderer against these item. | 12 | CUM | |
| 123 | 123 | Dewatering and taking out/removal of sludge, waste/foreign materials from septic tanks using mechanical pump and disposal of raw water/effluent/sludge/waste/foreign materials by burying underground borrow pit of suitable size and covering the pit with earth or earth mixed rubbish with spreading bleeching powder @ 1Kg per pit for disinfection purpose and removing surplus soil to a distance n.exc 50m complete all as directed by Engineer-in-Charge.\nNote: (i) Measurement of sludge (solid/semi-solid) shall be taken after draining out of effluent/water over the accumulated sludge.\n(ii) Cost of earthwork in excavation for earth pit and spreading of bleaching powder shall deemed to be included in the unit rate quoted by the tenderer against these item. | 15 | CUM | |
| 124 | 124 | Cleaning / removal of sludge, waste/foreign materials from Manholes using mechanical pump and disposal of raw water/effluent/sludge/waste/foreign materials by burying underground borrow pit of suitable size and covering the pit with earth or earth mixed rubbish and removing surplus soil to a distance n.exc 50m complete all as directed by Engineer-in-Charge.\nNote: \n(i) Cost of earthwork in excavation for earth pit shall deemed to be included in the unit rate quoted by the tenderer against these item. | 50 | EACH | |
| 125 | 125 | Cleaning of CI / RCC / PVC pipes of any dia from first floor to ground floor up to trap and first manhole along the wall,floor,including rodding and making pipes blockage free for smooth flow or discharge of water complete all as directed by Engineer-in-Charge.\n\n | 70 | RM | |
| 126 | 126 | E&M works Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holders, regulators, switch socket outlets, bell push, ceiling rose , light fittings etc and making good disturbed surfaces of walls with cement sand mortar (1:6) and white/colour wash to match with existing surfaces and removing the materials to store for keeping in safe custody or taking credit ( Credit for above items should be made as per PS conditions separately etc complete all as directed by Engineer -in -Charge | 280 | PER POINT | |
| 127 | 127 | M&L for Point wiring with two single core PVC insulated FRLSH grade, 1100V grade cable with multistranded copper conductor of size 1.5 Sqmm (Nominal area) (ISI Marked) drawn in and including PVC Casing capping (medium grade) of suitable size with all fittings and accessories including PVC rectangular board of suitable size and drawing continuous earth wire of PVC insulated FRLSH grade, unsheathed stranded copper conductor of size 1.5 Sqmm (ISI Marked) green in colour as earth continuity conductor connected to common earth dolly including making good disturbed surfaces of wall with cement sand mortar with necessary colour wash etc complete all as specified in SSR Part-I, 2009 and Part-II, 2010 and as directed by Engineer-in- Charge for one light point / one Fan / bell point by one one way switch.\n\n \n | 155 | PER POINT | |
| 128 | 128 | All as per item No 127.00 here in above but for one 2/3 pin socket outlet 5/6 Amps point on independent board etc complete all as directed by Engineer -in -Charge . | 30 | PER POINT | |
| 129 | 129 | All as per item No 127.00 here in above but for one 2/3 pin socket outlet 5/6 Amps point on same board etc complete all as directed by Engineer -in -Charge . | 27 | PER POINT | |
| 130 | 130 | All as per Item No.127.00 here-in-above but with FRLSH grade, (ISI mark) PVC insulated and unsheathed two run multistranded copper conductor of size 4.0 Sqmm for one power point of 3 pin 15 Amps on independent board including FRLSH grade (ISI mark), PVC insulated, unsheathed one run multi-stranded copper conductor of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. | 60 | PER POINT | |
| 131 | 131 | All as per item No 127.00 here in above above but for one call bell point controlled by one push button switch etc complete all as directed by Engineer -in -Charge . | 8 | PER POINT | |
| 132 | 132 | Supply and fix Bell push, piano type, 5/6 Amps, single pole, 230 V (ISI mark) completed all as specified and directed. | 8 | EACH | |
| 133 | 133 | Supply and fixing ,Call bell, ding dong, AC, 230 V, Single pole (ISI marked) completed all as specified and directed. | 8 | EACH | |
| 134 | 134 | Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 5 Amps complete all as specified and directed. | 240 | EACH | |
| 135 | 135 | Supply and fix, Switch piano (ISI marked) Single pole 240 volts, flush type, one way 15 Amps complete all as specified and directed. | 17 | EACH | |
| 136 | 136 | Supply and fix Socket outlet (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. | 20 | EACH | |
| 137 | 137 | Supply and fix Socket outlet (ISI marked), 2/3 pin and 15 Amps, flush type, 240 volts complete all as specified and as directed. | 17 | EACH | |
| 138 | 138 | Supply and fix Switch socket combination (ISI marked), 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. | 30 | EACH | |
| 139 | 139 | Supply and fix Switch socket combination (ISI marked), 2/3 pin and 15 Amps, flush type, 240 volts complete all as specified and as directed. | 50 | EACH | |
| 140 | 140 | S&F in repair decorative wall mounted LED batten fittings with all accessories, 18 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed Make Havells Cat part No. LHEXBQP71N1W018 or Make:- CROMPTON Cat Part No. LCTL 18 CDL. | 110 | Each | |
| 141 | 141 | S&F in rpair decorative wall mounted LED batten fittings with all accessories, 1 x 9 Watt, extruded aluminium heat shrink type and provided for efficient heat dissipation and integrated electronic driver and fixed to wall with 2 Nos PVC block of suitable size complete all as specified and as directed. Make :- Crompton Cat part No. LCTL-9-CDL or Make:- Havells Cat part No. LHEXBQP7IN1W009. | 40 | EACH | |
| 142 | 142 | S&F lamp holder, insulated body, with back plate for batten fitting suitable for GLS type LED bulb complete all as specified and as directed. | 50 | Each | |
| 143 | 143 | M&L Ceiling rose, 3 terminals PVC/polycarbonate, isolated body complete all as specified and directed. | 80 | Each | |
| 144 | 144 | Supply and fix in repair MCB Distribution board, TP&N , verticle, double door, ,sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDLVDRWAOF004 or equivalent in Legrand / L&T. | 2 | EACH | |
| 145 | 145 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Legrand / L&T. | 2 | EACH | |
| 146 | 146 | Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Legrand / L&T. | 2 | EACH | |
| 147 | 147 | Supply and fix in repair MCB Distribution board, SPN , double door, ,sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,240 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW04 or equivalent in Legrand / L&T. | 2 | EACH | |
| 148 | 148 | Supply and fix in repair MCCB four pole , 415 Volt, 50-63 Amps,16kA , capacity 'C' series adjustable thermal & fixed magnetic setting complete all as specified and directed.Make: Indoasian Cat part No - 830019 & 830020 or equivalent in L&T / Legrand. | 1 | EACH | |
| 149 | 149 | Supply and fix MCB DP, 240 Volts, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed including taking down old one. Make: Havells Cat part No - DHMGCDPF006-032 or equivalent in L&T / Legrand. | 9 | EACH | |
| 150 | 150 | Supply and fix MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed iIncluding taking down old one. Make: Havells Cat part No - DHMGCSPF006-032 or equivalent in Legrand / L&T. | 40 | EACH | |
| 151 | 151 | Material and labour for sub main wiring with two single core 4.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 4.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 4.0 sqmm cable , one run of earth wire of 4.0 sqmm and one run of PVC casing capping shall be measured as one length).Make- Cable- Finolex/RR kabel/Havells/KEI, PVC Casing Capping- Presto plast/Finolex/Kalinga. | 30 | RM | |
| 152 | 152 | M&L for Sub main wiring with four runs of 6.0 Sqmm FRLSH grade, (ISI mark) PVC insulated, multi stranded, unsheathed, copper conductor and two run of, PVC insulated multistranded FRLSH, grade (ISI mark) unsheathed copper conductor of size 6 Sqmm green colour as earth lead including PVC casing capping of suitable size, complete all as specified and directed, including taking down old unservicable one (i) .(Note: Three runs of 6 Sqmm, cable one run of earth wire of size 6.0 Sqmm cable and one run of PVC casing capping shall be measured as one unit). (ii) Cable required for connection to DBs shall be deemed to be included and shall not be measured separately. (iii) Earth wire shall run inside the PVC casing and capping. | 20 | RM | |
| 153 | 153 | Supply and fix in repairs LED lamp 7 Watt B22 complete all as as specified and as directed. Make Havell's Cat part No LHLDERUEMD8X007 or equivalent make of Bajaj / Philips / Wipro | 60 | EACH | |
| 154 | 154 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I including taking down old unserviceable one etc complete all as specified and as directed. | 2 | Each Job | |
| 155 | 155 | S & F in repair Wall bracket decorative LED Light fitting with lamp 5 Watt complete with necessary connection etc complete all as specified and as directed. Make Philips cat Part No 32032 /11 or equivalent model from Havell's/Bajaj. | 8 | EACH | |
| 156 | 156 | S & F in repair wall bracket decorative LED Light fitting with lamp 5 Watt complete with necessary connection etc complete all as specified and as directed. Make Philips Cat Part No (QWG324) or equivalent model from Havell's/Bajaj | 10 | EACH | |
| 157 | 157 | S & F in repairs Exhaust fan 230 volts , 225 mm sweep ,ventilator DX including making all necessary electric connection and testing etc complete all as specified and as directed . Make :- Orient /Bajaj / Philips. Note:- Old unserviceable exhaust fan shall be deposited in E&M store and the same shall be entered in credit ledger. | 5 | EACH | |
| 158 | 158 | S & F in repairs Exhaust fan 230 volts , 250 mm sweep , Hi speed including making all necessary electric connection and testingetc complete all as specified and as directed . Make :- Orient /Bajaj / Philips. Note:- Old unserviceable exhaust fan shall be deposited in E&M store and the same shall be entered in credit ledger. | 4 | Each | |
| 159 | 159 | S&F New generation, energy saving & envoirmental friendly, long life versetile pressure diecast aluminium IP 66 roadway luminaire 25w LED with lamp and all accessories including taking down old unserviceble one.Make : Bajaj Cat Part No BRLEP 25W LED WH or equivalent Philips / CG. | 5 | EACH | |
| 160 | 160 | Excavation in trenches n exc 1.5 mtr wide and depth n exc 1.5 mtr deep for foundation, etc n exc 10 sqmtr on plan, in soft/loose soil and getting out complete all as specified and directed. | 108 | CUM | |
| 161 | 161 | Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 Cm thick as in soft/loose soil etc complete all as specified and as directed. | 64 | CUM | |
| 162 | 162 | Removing excavated materials (soil) n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as directed. | 34 | CUM | |
| 163 | 163 | M&L for Sand cushioning with dry clean river sand for protection/covering of under ground cable in trenches complete all as specified and directed by Engr-in-Charge. \nNote:- Punned thickness only shall be measured for payment. | 21 | CUM | |
| 164 | 164 | Supply and laying Sub class 'B' well burnt brick, laid flat in trenches as protection to LT XLPE cable complete all as specified and as directed. | 2.2 | PER 1000 NOS | |
| 165 | 165 | Supply and laying GI tubing light grade,50 mm bore with all fittings, fixed complete to walls and ceiling or laid in floor for cable crossing complete all as specified and as directed including taking down old unserviceable one. | 20 | RM | |
| 166 | 166 | Supply, laying XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground cable with stranded aluminum conductor 1100 volt grade of size 150 Sqmm 3.5 Core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed including taking down old unserviceable one etc complete all as specified and as directed. | 15 | RM | |
| 167 | 166.01 | All as per Item No.166.00 above but size of XLPE cables 95 Sqmm 3.5 Core.\n | 30 | RM | |
| 168 | 166.02 | All as per Item No.166.00 above but size of XLPE cables 70 Sqmm 3.5 Core.\n | 40 | RM | |
| 169 | 166.03 | All as per Item No.166.00 above but size of XLPE cables 50 Sqmm 3.5 Core.\n | 30 | RM | |
| 170 | 166.04 | All as per Item No.166.00 above but size of XLPE cables 16 Sqmm 4.0 Core.\n | 120 | RM | |
| 171 | 167 | Supply and fix or lay PVC insulated and sheathed twin core flat cables 1100 volts each core having single stranded aluminium conductor service cable of size 10 sqmm etc complete all as specified and as directed. | 50 | RM | |
| 172 | 168 | Supply and fix or lay PVC insulated and sheathed twin core flat cables 1100 volts each core having single stranded aluminium conductor service cable of size 4 sqmm etc complete all as specified and as directed. | 50 | RM | |
| 173 | 169 | Supply and erecting steel tubular swaged pole 9.00 m long type 410 SP-31 complete with cast iron base plate and final taper plug duly painted with anti corrosive paint internally and externally and upto 1.5 m length of pole above ground level (externally) shall be painted with two coats of synthetic enamel paint in strips of 30 Cm length, black and yellow alternatively and balance of pole with two coats of aluminium paint including dismantling of old unserviceable steel tubular pole of any size with necessary disconnection of electric wire, fitting and fixtures etc as required including dismantling of old unserviceable one complete all as specified and as directed by Engr-in-Charge. Make:- Bansal / M/s Calcutta poles ltd or equivalent and approved.\n | 1 | EACH | |
| 174 | 170 | Supply and fix in repair LT cable jointing kit 1100 volt grade cable for straight through joint , cold shrink type complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 50 to 95 sqmm etc complete all as specified and as directed by Engr-in-Charge. \n | 1 | EACH | |
| 175 | 171 | Supply and fix in repair LT cable jointing kit 1100 volt grade cable for straight through joint , cold shrink type complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 120 to 185 sqmm etc complete all as specified and as directed by Engr-in-Charge. \n | 1 | EACH | |
| 176 | 172 | Supply and fix in repair LT cable jointing kit 1100 volt grade cable for indoor / outdoor termination joint , heat shrink type complete with jointing material and accessories suitable for 4 core XLPE armoured aluminium conductor cable of size 75 to 150 sqmm etc complete all as specified and as directed by Engr-in-Charge. \n | 1 | EACH | |
| 177 | 173 | Restraining of existing ACSR conductor on LT over head line on the poles without taking down ACSR from over head line by disconnecting and untying from insulator and retying with new binding wire , rejoining of service connection of street light and all other jumper connection etc complete all as specified and as directed by Engr-in-Charge. (Note:- Three runs of phase conductor , one run of neutral conductor and two runs for street light ACSR conductor shall be measured as one lenght.)\n | 80 | RM | |
| 178 | 174 | Dismantling insulators of any type, any size from 9.00 metre LT poles after disconnectiong all incoming and out going electrical connection etc complete all as specified and directed. | 13 | EACH | |
| 179 | 175 | M&L for Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade etc complete all as specified and directed. | 8 | EACH | |
| 180 | 176 | M&L for Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, with section of straps 31 x 3 dia of bolts 12 mm and working pressure 1100 volts of size 75 mm height and 90 mm max. dia etc complete all as specified and directed. | 5 | EACH | |
| 181 | 177 | M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of synthetic enamel paint etc including taking down old unserviceable one complete all as specified and directed. | 0.3 | QTLS | |
| 182 | 178 | Cutting or trimming of tree branches after disconnection of electric connection ,to clear OH lines in the area of LT OH lines feeders for a span of 30 m each and removal of the trimmed branches of trees and depositing the same in MCD waste bins inside the campus including resuming electric supply by necessary electric connection etc complete all as specified and directed. | 10 | PER SPAN | |
| 183 | 179 | S&F in repair GI Strip 32 x 6 mm as earth continuity conductor or main earthing lead buried in ground or drawn through pipes or fixed to wall or poles or any other situation for loop earthing etc complete all as specified and directed. | 20 | RM | |
| 184 | 180 | M&L for PCC, type C1, (1:3:6, using 20mm graded stone aggregates) as in coping of poles including necessary formwork etc complete all as specified and as directed by Engr-in-Charge. | 0.2 | CUM | |
| 185 | 181 | M&L for cutting of existing road / hard standing / foot path surfaces for laying water tubings and making good to disturbed surfaces with plain cement concrete type C-2 (1:3:6 , using 40 mm graded crushed stone aggregate etc complete all as specified and as directed. \n | 3.5 | CUM | |
| 186 | 182 | S&F in repair 3 phase LED Ammeter etc complete all as specified and as directed by Engr-in-Charge. Make:-L&T Cat part No:WL131020OOO or equivalent in Havells / Legrand. | 2 | EACH | |
| 187 | 183 | S&F in repair 3 phase LED Voltmeter etc complete all as specified and as directed by Engr-in-Charge. Make:-L&T Cat part No:WL132020OOO or equivalent in Havells / Legrand. | 2 | EACH | |
| 188 | 184 | Supply and fix in repair MCCB, four pole, 100-125 Amps , 415 Volts, thermal and magnetic release, 25 kA, 50Hz, complete all as specified and directed by Engr-in-Charge . Make:- L&T Cat part No:CM90642OOLO of or equivalent in Siemens / Legrand. | 1 | EACH | |
| 189 | 185 | Supply and fix in repair MCCB, four pole, 250 Amps , 415 Volts, adjustable thermal and fixed magnetic setting, 25 kA, 50Hz, complete all as specified and directed by Engr-in-Charge . Make:- L&T Cat part No:CM90642OOPO of or equivalent in Siemens / Legrand. | 1 | EACH | |
| 190 | 186 | Supply and fix in repair MCCB, four pole, 125-160 Amps , 415 Volts, adjustable thermal and fixed magnetic setting, 25 kA, complete all as specified and directed by Engr-in-Charge . Make:- L&T Cat part No:CM90642OOMO of or equivalent in Siemens / Legrand. | 1 | EACH | |
| 191 | 187 | Supply and fix in repair MCB, TPN, 415 Volts, adjustable thermal and fixed magnetic setting, 10 KA, 63 amps 'C' series complete all as specified and directed by Engr-in-Charge . Make:- L&T Cat part No:BB40630C of or equivalent in Siemens /Legrand. | 2 | EACH | |
| 192 | 188 | Supply and fix in repair MCB, SPN, 415 Volts, adjustable thermal and fixed magnetic setting, 10 KA, 63 amps 'C' series complete all as specified and directed by Engr-in-Charge . Make:- L&T Cat part No:BB20630C of or equivalent in L&T /Legrand. | 2 | EACH | |
| 193 | 189 | M&L for Earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth strip 32 X 6 mm as earth lead by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I including taking down old unserviceable earthing plate with accessories. Note:- GI strip upto 7.5 m length shall be deemed to be included in the quoted rate against ibid item. The quantity required over 7.50 m shall be measured and paid under relevant items seperately. | 2 | EACH SET | |
| 194 | 190 | M&L for painting of LT panel / feeder pillar with one coat of synthetic enamel paint including necessary preparation of old painted steel surfaces etc complete all as specified and as directed. | 25 | SQM | |
| 195 | 191 | Servicing of LT Panel of size 1.60 m x 1.20 m x 0.60 m after necessary shut down and removing all dust particles and proper layout of LT Panel with gland packing including 2.5 sqmm copper single core copper cable including repairing / replacing of door hinges / door lock etc including thereafter electric connection etc complete all as specified and as directed. | 5 | EACH JOB | |
| 196 | 192 | Supply only MCCB, four pole, 32 Amps , 415 Volts, adjustable thermal and fixed magnetic setting, 25 kA, (out-going 01 no) complete all as specified and directed by Engr-in-Charge . Make:- L&T Cat part No:CM9171200E00G of or equivalent in Siemens / Legrand. | 2 | EACH | |
| 197 | 193 | M&L for preparation of old painted ( outer exposed surface ) of electric steel swaged tubular poles over all diemension 8.50/ 9.00 meter long, painting starts from ground level with black bituminous paint upto one meter and thereafter applying one coat of aluminium paint including over MS channel / angle iron and clamps with bolts, nuts of street light fittings and writing pole No using black colour synthetic enamel paint of existing size or letters etc complete all as specified and as directed. | 80 | EACH JOB | |
| 198 | 194 | Taking up or down steel tubing with connections including cleaning for refixing or removal from site with all fittings complete all as specified and directed. of following bore(s) of pipe :- (Note - 1:- excavation will be measured and paid seperately under relevant items. ) (a) 100 mm bore | 20 | RM | |
| 199 | 194.01 | (b) All as per item no. 194.00 here in above but of 80 mm bore | 20 | RM | |
| 200 | 194.02 | © All as per item no. 194.00 here in above but of 50 mm bore | 80 | RM | |
| 201 | 194.03 | (d) All as per item no. 194.00 here in above but of 40 mm bore | 70 | RM | |
| 202 | 194.04 | (e) All as per item no. 194.00 here in above but of 25 mm bore | 100 | RM | |
| 203 | 194.05 | (f) All as per item no. 194.00 here in above but of 20 mm bore | 100 | RM | |
| 204 | 195 | Refixing of old serviceable cast iron water mains obtained from taking down pipes against serial item no. 194.00 to 194.05 ,fitted with new fittings in new or old position ( wall, ceiling or floor) complete all as specified and as directed by Engineer in charge of following bore(s) of pipe :- (a) 100 mm bore | 5 | RM | |
| 205 | 195.01 | (b) All as per item no. 195.00 here in above but of 80 mm bore | 5 | RM | |
| 206 | 195.02 | © All as per item no. 195.00 here in above but of 50 mm bore | 20 | RM | |
| 207 | 195.03 | (d) All as per item no. 195.00 here in above but of 40 mm bore | 15 | RM | |
| 208 | 195.04 | (e) All as per item no. 195.00 here in above but of 25 mm bore | 20 | RM | |
| 209 | 195.05 | (f) All as per item no. 195.00 here in above but of 20 mm bore | 20 | RM | |
| 210 | 196 | Supply , laying and connection in trenches GI tubing , medium grade, including fittings such as tee, bend, nipple, socket, reducer, flange, union etc complete all as directed by Engr in Charge of following bore (s) of pipe:- (a) 100 mm bore Note - 1:- excavation will be measured and paid seperately under relevant items. ) | 12 | RM | |
| 211 | 196.01 | (b) All as per item no. 196.00 here in above but of 80 mm bore | 12 | RM | |
| 212 | 196.02 | © All as per item no. 196.00 here in above but of 50 mm bore | 60 | RM | |
| 213 | 196.03 | (d) All as per item no. 196.00 here in above but of 40 mm bore | 55 | RM | |
| 214 | 196.04 | (e) All as per item no.196.00 here in above but of 25 mm bore | 80 | RM | |
| 215 | 196.05 | (f) All as per item no. 196.00 here in above but of 20 mm bore | 80 | RM | |
| 216 | 197 | S&F in repair 3- layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply incl all PP-R plain & brass threaded polypropylene random fittings such as male/female threaded socket, male/female threaded tee, reducers, union, socket, end cap, plug, etc laid in trenches / wall / floor incl connection from water main GI / PP-R pipe etc complete all as specified and as directed . (a) 32 mm bore Note - Excavation will be measured and paid seperately under relevant item. | 28 | RM | |
| 217 | 197.01 | (e) All as per item no. 197.00 here in above but of 25 mm bore | 33 | RM | |
| 218 | 198 | Supply and fix in repair CI Sluice valve 80 mm bore with flanged ends as per IS-14846 PN-1.6 including stainless steel spindle and wheel , ISI marked with nut bolts and jointing material i.e. rubber gasket etc complete all as specified and directed by Engr-in-charge. | 1 | EACH | |
| 219 | 199 | M&L for flange joint with new flange (set of two flange) and rubber gasket, nuts, bolts, washer of required size and white lead complete all as directed by Engr-in-Charge including taking down old unserviceable one for the following bore (s) of pipe:-\n(Note : Excavation if any will measured and paid separately under appropriate items of this schedule.) (a) 100 mm bore | 2 | EACH | |
| 220 | 199.01 | (b) All as per item no.199.00 here in above but of 80 mm bore | 2 | EACH | |
| 221 | 200 | S&F in repair Gun metal gate valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed by Engr-in-Charge for the following bore (s) of pipe:-\n(a) 50 mm bore | 2 | EACH | |
| 222 | 200.01 | (b) All as per item no.200.00 here in above but of 40 mm bore | 2 | EACH | |
| 223 | 200.02 | © All as per item no.200.00 here in above but of 25 mm bore | 5 | EACH | |
| 224 | 200.03 | (d) All as per item no.200.00 here in above but of 20 mm bore | 5 | EACH | |
| 225 | 201 | S&F in repair PP-R Gate valves (brass insert) as per requirement of the site suitable etc complete all as specified and directed by Engr-in-Charge for following bore (s) of pipe :- (a) 32 mm bore | 1 | EACH | |
| 226 | 201.01 | (b) All as per item no.201.00 here in above but of 25 mm bore | 1 | EACH | |
| 227 | 203 | M&L for construction of Block masonry valve pit of size 900 mm x 900 mm x 900 mm (internal dimension) complete with MS angle iron frame work ( angle size 40 x 40 x 6 mm ) , 3 mm thick MS shet top cover , openable through hinges including necessary locking arrangement , rendering 15 mm thick cement mortar 1:4 on inside and exposed external surface in two layers (5+10) mixed with water proofing compound, and painting steel sutfaces with two coats of bituminous paint inside and on exposed surfaces complete all as specified and shown in Drg No. TD/EM/6 Sheet 1/2 & 2/2 including dismantling old unserviceable one. | 1 | EACH | |
| 228 | 204 | M&L for construction of Block masonry valve pit of size 600 mm x 600 mm x 600 mm (internal dimension) complete with MS angle iron frame work ( angle size 40 x 40 x 6 mm ) , 3 mm thick MS shet top cover , openable through hinges including necessary locking arrangement , rendering 15 mm thick cement mortar 1:4 on inside and exposed external surface in two layers (5+10) mixed with water proofing compound, and painting steel sutfaces with two coats of bituminous paint inside and on exposed surfaces complete all as specified and shown in Drg No. TD/EM/6 Sheet 1/2 & 2/2 including dismantling old unserviceable one. | 1 | EACH | |
| 229 | 205 | Suplying, fabricating & fixing structural mild steel channel, angle, iron, flat iron, sheets and brackets etc for fabrications of valve chamber cover, chasis for pump, PS tank plates, PS tank covers, clamps and back plates including nuts, bolts and washers, welding banding cold , or hot drilling holes for insulators bolts in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide primer etc complete all as specified and as directed. | 0.2 | QTL | |
| 230 | 206 | M & L for preparation of steel surfaces of any description as CI / GI pipes, pit covers etc and applying one coat of synthetic enamel paint complete as specified and as directed. | 20 | SQM | |
| 231 | 207 | S&F in repairs LED driver for 25 watt LED street light etc complete all as specified and as directed.Make-Crompton Greaves cat part no. S0DRVES-36-600-25W or equivalent make of Havells /Bajaj. | 5 | Each | |
| 232 | 208 | S&F in repairs LED driver for 45 watt LED street light etc complete all as specified and as directed.Make-Crompton Greaves cat part no. S0DQL-65-700-45W or equivalent make of Havells /Bajaj. | 5 | Each | |
| 233 | 209 | S&F in repair LED street light fitting 1x45W LED street light including LED lamp in aluminium PDC housing, toughened glass cover with IP-66 protection etc complete all as specified and as directed.Make:- Havells cat part no. ENDURAPEARLNEOSL45LED757SASYTOPC or equivalent make of Bajaj / Eveready / Phillips. | 6 | Each | |
| 234 | 210 | S&F in repair LED street light fitting 1x60W LED street light including LED lamp in aluminium PDC housing, toughened glass cover with IP-65 protection etc complete all as specified and as directed.Make:- Havells cat part no. ENDURAPEARLPLUSSL60WLED757SASYTOPC or equivalent make of Bajaj / Eveready. | 5 | Each | |
| 235 | 211 | S&F in repair LED street light fitting 1x70W LED street light including LED lamp in aluminium PDC housing, toughened glass cover with IP-66 protection etc complete all as specified and as directed.Make:- Havells cat part no. ENDURAPEARLPLUSSL70WLED757SASYTOPC or equivalent make of Bajaj / Eveready. | 2 | Each | |
| 236 | 212 | M&L for Street light bracket,made out of 40 mm dia GI pipe (medium grade ) 1.50 m long bend to shape as required and welded and fixed in position including dismantling of old unserviceable one etc complete all as specified and as directed. | 10 | Each | |
| 237 | 213 | M&L for Street light bracket,made out of 25 mm dia GI pipe (medium grade ) 1.50 m long bend to shape as required and welded and fixed in position including dismantling of old unserviceable one etc complete all as specified and as directed. | 10 | Each |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
