Repair And Renovation Work Repair And Renovation Works For Setting Up Of Ssk At Bidupur Sc , Jalangi Block , Muirshidabad, Vill-Bidupur , Chowanpara Gp, Jalangi Block, Mursh-West Bengal

TDR : 22676676

Tender Notice
BOQ

Expired

Vill-Bidupur , Chowanpara Gp, Jalangi Block, Mursh , West Bengal

Tender Brief : Repair And Renovation Work Repair And Renovation Works For Setting Up Of Ssk At Bidupur Sc , Jalangi Block , Muirshidabad

Document Fees
Refer document

EMD
₹ 11575.0 /-

Tender Value
₹ 5.78 Lakhs /-

Submission Date
13-12-2019

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !

Name of Work:Repair and Renovation works for setting up of Su-Swasthya Kendra at Bidupur Sub Centre, Chawanpur GP, Jalangi Block, Murshidabad.
1	1	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.i) For Approach Road	15	sq.m
2	2	I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)(A) [Pakur Variety], (a) 1:3:6 proportion	1.5	cu.m
3	3	Repairing crack in wall by cement grout ing (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface.(Cement-69 Kg/100 m), At Gr. Fl.	21.3	Rm
4	4	(A) Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including mending good damages and finishing the surface to match with adjacent areas complete as per direction.(i) With plain cement concrete blocks(1:1½:3) with stone chips.(a) Block size 250 x 125 x 75 mm., In GR.Fl	8	Nos
5	5	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.i) Gr.Fl, Ceiling , ii) For inside wall, iii) In outside wall	216.3	sq.m
6	6	Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof.	62.22	sq.m
7	7	Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.(a) upto 150 mm. thick	3.111	cu.m
8	8	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety	3.111	Sq.m
9	9	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. In Gr.Fl, (i) Pakur Variety,	0.27	Cu.m
10	10	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Gr.Fl, i) Tor steel/Mild Steel,( Sail/Tata)	0.212	Qt.
11	11	Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straightincluding fitting, fixing and striking out after completion of works (upto roof of ground floor), (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge., \n	4.005	sq.m
12	12	Brick work with 1st class bricks in cement mortar (1:6), (b) In superstructure, ground floor	1.08	cu.m
13	13	125 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor.	2.375	sq.m
14	14	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfer ing corners as directed, (i) With 1:4 cement mortar, (b) 10 mm thick plaster,	36.372	sq.m
15	14.1	(i) With 1:6 cement mortar, (c) 15 mm thick plaster,	108.204	sq.m
16	14.2	(i) With 1:6 cement mortar, (c) 20 mm thick plaster,	71.724	sq.m
17	15	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.A) Floor, With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick, (a) Area of each tile above 0.09 Sq.m, Coloured decorative, In Gr. Fl	62.22	sq.m
18	15.1	Wall, With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick, (b) Area of each tile above 0.09 Sq.m, (ii) other than Coloured decorative incl white, In Ground Floor	85.3725	sq.m
19	16	Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete . Area of each Granite slab > 0.6 upto 1.0 square metre.	2.1	sq.m
20	17	Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately), (a) Upto area 2.5 Sq.m D, In Gr.Fl	14.88	sq.m
21	18	Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(h) Neem, Jam, Jackfruits , In Gr.Fl	0.158	cu.m
22	19	Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.iii) 35mm thick shutters with19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,	8.4	sq.m
23	20	Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) ,(b) 40mm X 6mm, 200mm Length	24	Nos
24	21	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm.	24	Nos
25	22	i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(a) 200mm long	4	Nos
26	23	A) Iron door ring of approved quality fitted and fixed with nut and washer complete.(ii) 75mm dia	8	Nos
27	24	Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iv) 300mm x 19mm dia. bolt.	4	Nos
28	25	Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (iii) 100 mm grip x 12 mm dia rod.	4	Nos
29	26	Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and , all other incidental charges complete.	9.96	Mtr.
30	27	Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm , shall be tapered on both sides to form lock rail.	2.94	sq.m
31	28	Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, 10-12 Micron thickness Annodizing film Natural white, For 2-Track window : Window	39.6	Kg
32	29	Supplying, fitting and fixing windows & ventilators with or without integarted grills cionforming to I.S. 1038-1975 and manufactured from rolled steel sections conforming to I.S. 7452-1974 with non- friction projecting type hinges, glazing clips, lugs, locking bracket handle plate, handle, peg stay etc. I/c. hosting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect including glazing. Without integrated grills - in all floors, b) Openable steel windows as per I.S. sizes with side hung shutters and horizontal glazing bars, with or without fixed type ventilators ( the rate , admissible for the openable portion only).	0.54	sq.m
33	29.1	c) M.S integrated grill as per approved design integrated with steel window or ventilator, joints , continiously welded with M.S flats and bars.	6.46	Kg
34	30	(a) M.S.or W.I. Ornamental grill of approved design joints contin uously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg ./sq .mtr and up to 16 Kg./sq. mtr.In Gr.floor	145.8	Kg
35	31	Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than150mm apart complete in all respect as per design including cost of all labour and materials.	2.52	sq.m
36	32	Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor..(b) 25mm mesh	7.2	sq.m
37	33	Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 4mm thick clear glass.	7.74	sq.m
38	34	Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge), In Gr. Fl	47.816	sq.m
39	35	(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.i) On Plastered surface , Gr.Fl.+1st Fl	240.96	sq.m
40	35.1	(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Add Steel window	15.264	sq.m
41	36	(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :iv) Two coats (with any shade except white), On Plastered surface	240.96	sq.m
42	36.1	On Timber surface, Gr.Fl	21.84	sq.m
43	36.2	Other metal Surface, WindowsGrills	15.264	sq.m
44	37	Applying Exterior grade Acrylic primer of approved quality and\nbrand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish), a) One Coats, Gr. Fl	119.54	sq.m
45	38	Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat), a) Normal Acrylic Emulsion	119.54	sq.m
46	39	Labour for Chipping of concrete surface before taking up Plaster ing work.Gr.Fl.	62.595	sq.m
47	40	(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification, Gr.Fl.	62.595	sq.m
48	41	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.Gr.Fl	3.13	cu.m
49	42	Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.	1.967	Kg
50	43	1.5 mm thick Net cement finish in wall, dado,	62.595	sq.m
51	44	Base Prise for supplying & Installation of Water Purified R.O technology minimum 10 Ltr Capacity.	1	Nos
52	45	Main signage of Vinyle Board with ACP Boarder 1800X1200 MM	4.32	sq.m
53	46	Name plate (300x150)	10	Nos
54	47	MEP Works	1	LS
55	48	GST @ 12%	1	LS
56	49	Labour welfare charge @ 1%	1	LS

Also Visit

Tenders

West Bengal Tenders

Construction Tenders

Civil Construction Tenders

Civil Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Repair And Renovation Work Repair And Renovation Works For Setting Up Of Ssk At Bidupur Sc , Jalangi Block , Muirshidabad, Vill-Bidupur , Chowanpara Gp, Jalangi Block, Mursh-West Bengal

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Name of Work:Repair and Renovation works for setting up of Su-Swasthya Kendra at Bidupur Sub Centre, Chawanpur GP, Jalangi Block, Murshidabad.
	Sl.No.	Item Description	Item Code / Make	Quantity	Units
1	1	Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.i) For Approach Road		15	sq.m
2	2	I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)(A) [Pakur Variety], (a) 1:3:6 proportion		1.5	cu.m
3	3	Repairing crack in wall by cement grout ing (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface.(Cement-69 Kg/100 m), At Gr. Fl.		21.3	Rm
4	4	(A) Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including mending good damages and finishing the surface to match with adjacent areas complete as per direction.(i) With plain cement concrete blocks(1:1½:3) with stone chips.(a) Block size 250 x 125 x 75 mm., In GR.Fl		8	Nos
5	5	Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.i) Gr.Fl, Ceiling , ii) For inside wall, iii) In outside wall		216.3	sq.m
6	6	Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof.		62.22	sq.m
7	7	Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m. In ground floor including roof.(a) upto 150 mm. thick		3.111	cu.m
8	8	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.a) Pakur Variety		3.111	Sq.m
9	9	Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. In Gr.Fl, (i) Pakur Variety,		0.27	Cu.m
10	10	Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Gr.Fl, i) Tor steel/Mild Steel,( Sail/Tata)		0.212	Qt.
11	11	Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straightincluding fitting, fixing and striking out after completion of works (upto roof of ground floor), (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge., \n		4.005	sq.m
12	12	Brick work with 1st class bricks in cement mortar (1:6), (b) In superstructure, ground floor		1.08	cu.m
13	13	125 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor.		2.375	sq.m
14	14	Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfer ing corners as directed, (i) With 1:4 cement mortar, (b) 10 mm thick plaster,		36.372	sq.m
15	14.1	(i) With 1:6 cement mortar, (c) 15 mm thick plaster,		108.204	sq.m
16	14.2	(i) With 1:6 cement mortar, (c) 20 mm thick plaster,		71.724	sq.m
17	15	Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.A) Floor, With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick, (a) Area of each tile above 0.09 Sq.m, Coloured decorative, In Gr. Fl		62.22	sq.m
18	15.1	Wall, With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick, (b) Area of each tile above 0.09 Sq.m, (ii) other than Coloured decorative incl white, In Ground Floor		85.3725	sq.m
19	16	Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete . Area of each Granite slab > 0.6 upto 1.0 square metre.		2.1	sq.m
20	17	Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately), (a) Upto area 2.5 Sq.m D, In Gr.Fl		14.88	sq.m
21	18	Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(h) Neem, Jam, Jackfruits , In Gr.Fl		0.158	cu.m
22	19	Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor.iii) 35mm thick shutters with19mm thick panel of size 30 to 45 cm. (b) Sishu, Gamar, Champ,		8.4	sq.m
23	20	Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) ,(b) 40mm X 6mm, 200mm Length		24	Nos
24	21	Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm.		24	Nos
25	22	i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting.(a) 200mm long		4	Nos
26	23	A) Iron door ring of approved quality fitted and fixed with nut and washer complete.(ii) 75mm dia		8	Nos
27	24	Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. (iv) 300mm x 19mm dia. bolt.		4	Nos
28	25	Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (iii) 100 mm grip x 12 mm dia rod.		4	Nos
29	26	Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and , all other incidental charges complete.		9.96	Mtr.
30	27	Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm , shall be tapered on both sides to form lock rail.		2.94	sq.m
31	28	Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, 10-12 Micron thickness Annodizing film Natural white, For 2-Track window : Window		39.6	Kg
32	29	Supplying, fitting and fixing windows & ventilators with or without integarted grills cionforming to I.S. 1038-1975 and manufactured from rolled steel sections conforming to I.S. 7452-1974 with non- friction projecting type hinges, glazing clips, lugs, locking bracket handle plate, handle, peg stay etc. I/c. hosting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect including glazing. Without integrated grills - in all floors, b) Openable steel windows as per I.S. sizes with side hung shutters and horizontal glazing bars, with or without fixed type ventilators ( the rate , admissible for the openable portion only).		0.54	sq.m
33	29.1	c) M.S integrated grill as per approved design integrated with steel window or ventilator, joints , continiously welded with M.S flats and bars.		6.46	Kg
34	30	(a) M.S.or W.I. Ornamental grill of approved design joints contin uously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg ./sq .mtr and up to 16 Kg./sq. mtr.In Gr.floor		145.8	Kg
35	31	Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than150mm apart complete in all respect as per design including cost of all labour and materials.		2.52	sq.m
36	32	Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). In ground floor..(b) 25mm mesh		7.2	sq.m
37	33	Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.i) 4mm thick clear glass.		7.74	sq.m
38	34	Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge), In Gr. Fl		47.816	sq.m
39	35	(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.i) On Plastered surface , Gr.Fl.+1st Fl		240.96	sq.m
40	35.1	(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Add Steel window		15.264	sq.m
41	36	(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :iv) Two coats (with any shade except white), On Plastered surface		240.96	sq.m
42	36.1	On Timber surface, Gr.Fl		21.84	sq.m
43	36.2	Other metal Surface, WindowsGrills		15.264	sq.m
44	37	Applying Exterior grade Acrylic primer of approved quality and\nbrand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish), a) One Coats, Gr. Fl		119.54	sq.m
45	38	Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat), a) Normal Acrylic Emulsion		119.54	sq.m
46	39	Labour for Chipping of concrete surface before taking up Plaster ing work.Gr.Fl.		62.595	sq.m
47	40	(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification, Gr.Fl.		62.595	sq.m
48	41	Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes.Gr.Fl		3.13	cu.m
49	42	Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer's specified rate) for concrete of various grades.		1.967	Kg
50	43	1.5 mm thick Net cement finish in wall, dado,		62.595	sq.m
51	44	Base Prise for supplying & Installation of Water Purified R.O technology minimum 10 Ltr Capacity.		1	Nos
52	45	Main signage of Vinyle Board with ACP Boarder 1800X1200 MM		4.32	sq.m
53	46	Name plate (300x150)		10	Nos
54	47	MEP Works		1	LS
55	48	GST @ 12%		1	LS
56	49	Labour welfare charge @ 1%		1	LS

Repair And Renovation Work Repair And Renovation Works For Setting Up Of Ssk At Bidupur Sc , Jalangi Block , Muirshidabad, Vill-Bidupur , Chowanpara Gp, Jalangi Block, Mursh-West Bengal

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us