Construction Of 32 Men Jawan Barrack Type A At Non Composite Bop Rustam Of 110 Bn Bsf Under Shq Bsf Dhubri Sh Providing Of Ei And Fans
Tender Value
9.62 Lakhs
Estimated cost
Bid Submission
03 Dec 2019
0 days left
EMD
19300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
BOP RUSTAM OF 110 BN BSF UNDER SHQ BSD DBR → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of 32 Men Jawan Barrack Type A At Non Composite Bop Rustam Of 110 Bn Bsf Under Shq Bsf Dhubri Sh Providing Of Ei And Fans
BOQ
| Name of Work: C/O 32 Men jawan barrack Type - A at non composite BOP Rustam of 110 BN BSF under SHQ BSF Dhubri (Sh: Providing of EI and Fan) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1.01 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group -B | 150 | Points | |
| 2 | 1.02 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | 109 | Metre | |
| 3 | 1.03 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required (A) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire | 410 | metre | |
| 4 | 1.04 | (B )2 X 6 sq. mm + 1 X 6 sq. mm earth wire | 14 | metre | |
| 5 | 1.05 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required | 10 | Metre | |
| 6 | 1.06 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. TV antenna socket outlet | 1 | Metre | |
| 7 | 1.07 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm) | 1 | Each | |
| 8 | 1.08 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. | 40 | Each | |
| 9 | 1.09 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. | 10 | Each | |
| 10 | 1.1 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. | 4 | Each | |
| 11 | 1.11 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. | 20 | Each | |
| 12 | 1.12 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings). | 38 | Each | |
| 13 | 1.13 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. | 37 | Each | |
| 14 | 1.14 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door | 2 | Each | |
| 15 | 1.15 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole | 30 | Each | |
| 16 | 1.16 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. | 5 | Each | |
| 17 | 1.17 | Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 AMP | 2 | Each | |
| 18 | 1.18 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. | 2 | Each | |
| 19 | 1.19 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. | 2 | Set | |
| 20 | 1.2 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. | 4 | Set | |
| 21 | 1.21 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. | 26 | Metre | |
| 22 | 1.22 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. | 16 | Metre | |
| 23 | 1.23 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. | 2 | Metre | |
| 24 | 1.24 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. | 10 | Each | |
| 25 | 1.25 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. | 25 | Each | |
| 26 | 1.26 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) | 130 | Metre | |
| 27 | 1.27 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) | 14 | Metre | |
| 28 | 1.28 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. | 4 | Each | |
| 29 | 1.29 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 25 sq. mm (22mm) | 9 | Each | |
| 30 | 1.3 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 35 sq. mm (32mm) | 4 | Each | |
| 31 | 1.31 | Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent /CFL/ HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. | 6 | Each | |
| 32 | 1.32 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) | 560 | Metre | |
| 33 | 1.33 | Excavation of foundation in soft soil I/C dressingor sides and raming of bottoms, lift up to 1.5 M including getting out the excavated soil and disposal of surplus excavated soil as durected within a lead of 50 mtr | 4.607 | CUM | |
| 34 | 1.34 | Providing and laying in position concerte 1:2:4 ( 1 cement: 2 coares sand: 4 graded stone aggregate 20 mm nominal size) in foundation of pole etc including from work etc as required. Size of foundation of pole = 2 M×0.5 M ×0.5 M) | 4 | CUM | |
| 35 | 1.35 | Providing and fixing circular/Hexagonal cast iron or M.S sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S bar bent to shape as per standard drawing. | 40 | Each | |
| 36 | 1.36 | Providing and fixing of 63 MM size DWC HDPE pipe ISI marked in the existing wall/floor , along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing and making goods with plastering and painting etc. complete as required. | 10 | Metre | |
| 37 | 1.37 | Providing and laying of 3.5 X 35 Sq.mm PVC insulated and PVC sheathed/XLPE aluminium conductor armored power cable of 1.1 KV grade (Havells/finolex/polycab) in the existing RCC/HUME/METAL pipe as required | 425 | Metre | |
| 38 | 1.38 | Providing and laying of 2X 25 Sq.mm PVC insulated and PVC sheathed/XLPE aluminium conductor armored power cable of 1.1 KV grade (Havells/finolex/polycab) in the existing RCC/HUME/METAL pipe as required | 140 | Metre | |
| 39 | 1.39 | SITC of ceiling fan 1200mm sweep usha make ISI marked MODEL appolo-EX/ENERGIA ISI OR compatible model in usha/havells/CG with same specification) with all accessories, including wiring the down rod of standard length (up to 30cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable etc as required. | 40 | Each | |
| 40 | 1.4 | SITC of LED street light luminaire of CG MAKE Model ASTRA CAT LSTS-45-CDL/Model nexus+ CAT LSTP-45-CDL 45WATTS LED- IP65 new generation energy saving fitting with die cast aluminium housing IP65 protected body on existing 32mm dia G.I pipe bracket including wiring by FRLS wire (1.5sqmm) etc as required.45WATTS . | 6 | Each | |
| 41 | 1.41 | Supplying and fixing Four pole , sheet steel , Busbar Chamber , 100 amp,415 volts ,on surface / recess, complete with Copper busbar ,earth terminal,painted including earthing etc as site as required.(HILITE'S ) | 2 | Each | |
| 42 | 1.42 | Supplying , Installation, testing and commissioning of pre-wired , LED TUBE light fittings / compact of MAKE CG RETROLED HAVING CAT-NO : - LT5RT1-18 - CDL/LTT8-20 WITH EXTERNAL DRIVER AND FIXTURE HAVING CAT NO:- IGP132LT8-16 Model LED BATTEN complete with all accessories etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required | 57 | Each | |
| 43 | 1.43 | Supplying, Installation, testing and commissioning of pre-wired, HAVELLS DELITE LED NEO CAT NO. LHEXBTP7IN1W009 10 WATT LED 6500 K MIRROR LIGHT , complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. | 2 | Each | |
| 44 | 1.44 | Supplying, Installation, testing and commissioning of pre-wired, SURFACE MOUNTABLE LED FITTINGS OF MAKE CROMPTON GREAVES MODEL POLARIS IV ROUND /POLARIS IV SQUARE LED CAT NO :- LCTL(R/S)N -18-CDL OR other compatable make with same/highest specification complete with all accessories & drivers etc. directly on ceiling/wall, including making connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 18 WATTS | 4 | Each | |
| 45 | 1.45 | Providing and fixing LED lamp, 10W (Philips/CG/Havells) on existing lamp holder etc as required | 37 | Each | |
| 46 | 1.46 | Supply and fixing of 45 watt LED security light fittings on existing pole including connections, testing, commissioning complete etc as reqd Cat no LSTP-45-CDL (Crompton), ENURA PEARL PULS Havells (LHETBXU7JA7B060)or its equivalent philips | 5 | Each | |
| 47 | 1.47 | Supplying and erection of 7 Mtrs long continously tapered octagonal pole (bolt fixing type) in single section with single longitudinal weld & galvanized with 1.5MTR long single arm standard bracket made upto 40NB dia HDG pipe suitable to mount on pole having top dia 70MM ( BAJAJ TYPE-2 HSN CODE 73089000) as per drawing and following specification:- Make CG/Bajaj/philips a) Top dia - 70mm b) Bottom dia - 130 mm c) Thickness of sheet - 3mm d) Base plate size - 220mm X 220 mm X 12mm e) The pole shall be complete with following :- Set of fountain bolts -4 nos, 20mm dia, 700 mm in length complete with anchor plate. The foundation bolt shall be hot dipped galvanised. f) Integral junction box duly hot dipped galvanised complete with door and locking arrangement as required. | 5 | Each |
AI Tender Summary
Tender Timeline
Nov 27, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 03, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 04, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender