Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #22657451

Special Repairs To Power House No 2 , Servant Qtrs Of Race View , Craven And Certain Revenue Works At Dssc Wellington .

Issued by Statutory Bodies & Commissions/Committees · WELLINGTON, Tamil Nadu
Tender Value
31.50 Lakhs
Estimated cost
Bid Submission
10 Dec 2019
0 days left
EMD
63000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
WELLINGTON → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Special Repairs To Power House No 2 , Servant Qtrs Of Race View , Craven And Certain Revenue Works At Dssc Wellington .

BOQ

Name of Work: SPECIAL REPAIRS TO POWER HOUSE NO 2, SERVANT QTRS OF RACE VIEW, CRAVEN AND CERTAIN REVENUE WORKS AT DSSC WELLINGTON.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11B/R PORTION\nDemolition of brick work or stone / boulder masonry, built in cement mortar, including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles etc., and removing unserviceable debris off the premises all as specified and as directed.47Cum
22Demolition of cement concrete (unreinforced) in ground floor and in pavings n.exc 15 cm thickness (below or above ground level) and removing unserviceable debris off the premises all as specified and as directed.22Cum
33Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, and removing unserviceable debris off the premises all as specified and directed.5.5Cum
44Dismantling timber scantlings 40 Sqcm and over in section in any position, framed or unframed work etc, complete all as specified and as directed.1Cum
55Dismantling timber scantlings as in fillets, rails, posts rafters, purlins etc., in framed/unframed work, n.exc 40 Sqcm in section in any position, complete all as specified and as directed.750RM
66Dismantling of wall and ceiling boards, (fibre, pulp, insulation, etc) or insulation boards /slabs /blankets, any thickness, including cover fillets complete all as specified and as directed.80Sqm
77Dismantling Asbestos cement (corrugated, semicorrugated, etc) sheets in roof, complete all as specified and as directed.170Sqm
88Taking down chowkats or frames including shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each, and removing from site, complete all as specified and as directed.19Each
99Taking down chowkats or frames including shutters (without taking off shutters from the frames) exc 1.50 Sqm and n.exc 4 Sqm each, and removing from site, complete all as specified and as directed.10Each
1010Excavation in trenches n.exc 1.50 m wide and n.exc 1.50m in depth in foundation and getting out in hard/dense soil all as specified and as directed.80Cum
1111M & L for providing plain cement concrete (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.28Cum
1212Returning, filling in, including spreading leveling watering and well ramming in layers not exc 25 cm thick with excavated soil all as specified and as directed.32Cum
1313Removal of surplus excavated materials (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.50 m above the starting point all as specified and as directed.202Cum
1414M & L for RCC (1:2:4) (Nominal mix), type B-1 (using 20mm graded crushed stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, shelves etc complete all as specified and directed.0.25Cum
1515M & L for walling of random rubble un coursed ,well bonded ,bedded and solidly hearted, built in CM (1:4) including necessary bond stones and pointing the unaccessible dressed surface with same mortar as the work proceds all as specified and directed.45Cum
1616M & L for Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) all as specified and as directed.17Cum
1717M & L for half brick thick brick wall with subclass 'B' bricks straight or curved on plan to any radius built in CM (1:4) all as specified and as directed.20Sqm
1818Dismantling of floor hearth or wall tiling including cement mortor bedding (but not backing) and removing serviciable tiles to store and rubbish off the premises all as specified and as directed.80Sqm
1919Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc., and removing unserviceable debris off the premises all as specified and as directed.100Sqm
2020M & L for 40mm thick PCC (1:2:4) type B-1, (using 20mm graded crushed stone aggregate) as in flooring, finished even and smooth without using extra cement all as specified and as directed.60Sqm
2121M & L for glazed ceramic coloured tiles 300 mm x 200 mm x 7 mm thick, as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry, pointed in white or coloured cement to match, laid over and including 10 mm thick rendering in CM (1:4) to receive tiles, complete all as specified and as directed.60Sqm
2222M & L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.09 Sqm but not exc 0.18 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) all as specified and directed.90Sqm
2323M & L for cudappah stone slab 20-25mm thick, machine cut including cutting, rubbing, polishing, moulding, rounding the exposed edges, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, laid over and including 20mm thick screed bed in CM (1:6) all as specified and as directed.4Sqm
2424M & L for use and waste of timber as in form work to sides and soffits of suspended slab such as roof slab, floor slab, shelves and similar works, for rough finished surfaces of concrete flat all as specified and as directed.4Sqm
2525M & L for mild steel TMT bars 6mm to 8mm dia as in reinforcement spaces and binders etc., cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.200Kgs
2626S & F for mild steel framed work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, chaneel or flat section) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified and directed by Engr-in-Charge.2520Kgs
2727M & L for second class hard wood decorative weather boarding, wrought, thickness 20mm to 25 mm and rebated on thick edge to give 20mm laps and fixed all as specified and directed.10Sqm
2828M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber /GI /Aluminium /IMS framework with screws complete all as specified and as directed by Engr-in-Charge.80Sqm
2929S & F for second class hard wood (Sal / Hollock) glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc., (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed.12Sqm
3030S & F for 40mm thick Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides fitted to chowkats complete all as specified and as directed.27Sqm
3131S & F solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ' C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement supplying & fixing in frames at site as per specification and drawing shown in SSR Part -II, complete all as specified and as directed.11Sqm
3232S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supply & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and as directed.43RM
3333S & F aluminium, anodised, barrel tower bolts of extruded section, 200mm long, complete all as specified and as directed.48Each
3434S & F 300 mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed.10Each
3535S & F mild steel cold rolled Butt hinges, medium weight, 100 mm long, complete all as specfied and as directed.36Each
3636S & F aluminium handles, cast type, anodised of size 150 mm long, complete all as specified and as directed.48Each
3737S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and as directed.15Sqm
3838S & F Steel windows hollow section (double leaf, gauge and glazed) with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and as directed.12Sqm
3939S & F for pressed steel frames of size 125 x 60 mm with 1.25mm thick sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed.40RM
4040M & L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in filling of steel chowkats or frames complete all as specified and as directed.0.25Cum
4141S & F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of watertanks and similar work congorming to Fe-290 Gde E 165 all as specified and directed.1100Kgs
4242S & F galvanised , corrugated mild steel sheeting 0.60mm thick with two corrugations side lap in roof, walls etc with grade of zinc coating 275 and fixed with L type or J type or cranked hook bolts all as specified and as directed.170Sqm
4343S & F plain , galvanished, mild steel sheeting 0.60mm thick, in ridges, hip, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 all as specified and as directed.15Sqm
4444M & L for second class hard wood clean sawn batten for MP tiles exc.15 Sq.cm and not exc.25 Sq.cm in sectional area ,at 30 cm centres all as specified and directed by Engr-in-Charge.170Sqm
4545M & L for second class hardwood plain fillets square, rectangular or traingular in section, clean sawn, secured with nails or brads in sectional area exc 13 Sqcm and n.exc 25 Sqcm all as specified and as directed.250RM
4646M & L for roof tiles, mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.180Sqm
4747M & L for Ridge or hip tiles to suit mangalore pattern of roofing tiles, bedded and jointed in lime mortar (1 :3) or cement mortar (1:6) all as specified and as directed.15RM
4848M & L for 75 mm thick cement concrete (1:3:6) type C-2, (using 40mm graded stone aggregate) as in sub base/ plinth protection/ pavings, finished fair & even without using extra cement, complete all as specified and as directed.184Sqm
4949Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and removing rubbish off the premises all as specified and directed.600Sqm
5050M & L for rendering 15mm thick in CM (1:4) mixed with WPC as per manufacturer's instruction (external surfaces of wall) on fair face of stone /brick surfaces, finished even and smooth without using extra cement all as specified and as directed.\nNote : WPC shall be measured and paid seperately.360Sqm
5151M & L for rendering 10mm thick in CM (1:6) (internal surfaces of wall) on fair faces of stone /brick surfaces, finished even and smooth without using extra cement all as specified and as directed.300Sqm
5252M & L for preparation of new plastered or unplastered surfaces of walls and applying two coats of white wash, complete all as specified and as directed.50Sqm
5353M & L for peparation of new plastered or unplastered surfaces of walls and applying two coats of dry distemper, white or tinted, complete all as specified and as directed.100Sqm
5454M & L for peparation of old plastered or unplastered surfaces of walls and applying one coat of dry distemper, white or tinted, complete all as specified and as directed.10Sqm
5555M & L for peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint (any shade) white or tinted, complete all as specified and directed.150Sqm
5656S & F 3 mm thick sheet glass ordinary quality, and glazing with oil putty or wooden beads in squares n.exc 0.50 Sqm in each pane, complete all as specified and as directed.23Sqm
5757S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n.exc 0.50 Sqm in each pane, complete all as specified and as directed.2Sqm
5858M & L for prepartion of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and as directed.120Sqm
5959M & L for prepartion of old wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.5Sqm
6060M & L for preparation of new steel surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.244Sqm
6161S & F 18/19mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work or in shutters, shelves etc including 6mm thick teak wood lipping as required, complete all as specified and directed.15Sqm
6262S & F 40mm dia cupboard knobs fixed with nut screw and washer of mild steel bright finished, complete all as specified and directed.14Each
6363S & F hasp and staple (Safety type) aluminium anodised including bolt to hinge plate and fixed with screws, 100mm size, complete all as specified and directed.2Each
6464S & F mild steel continuous piano hinges, bright finish or electro galvanised, width of flap when open 30mm, complete all as specified and directed.\n10RM
6565S & F PVC coated mild steel conduit pipe 25mm bore (Drapery rod) with a pair of PVC coated MS clamps to hold drapery rod and decorative attachment at one or both ends of drapery rod, fixed to opening of door /windows, (each opening n.exc 1.50mtr, contained with a pair of clamps and a pair of side ornamental attachments) complete all as specified and as directed.15RM
6666M & L for Plain cement concrete, (1:3:6) (Nominal Mix) type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels or drains etc, complete all as specified and as directed.5.5Cum
6767Extra labour for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc, complete all as specified and directed.130RM
6868Dismantling of PVC or reinforced cement concrete drain pipes upto 150mm bore, jointed in cement mortar and taking out of trenches, if required complete all as specified and as directed.55RM
6969S & F PVC ( SWR) pipes, type 'B', 75mm bore, single socketed in any length ,laid in trenches or in floors all as specified and as directed.12RM
7070S & F PVC ( SWR) pipes, type 'B', 110mm bore (OD), single socketed in any length ,laid in trenches or in floors all as specified and as directed.27RM
7171S & F PVC (SWR) bends any radius 110 mm bore all as specified and as directed.6Each
7272S & F PVC (SWR) bends any radius 75 mm bore all as specified and as directed.6Each
7373S & F PVC (SWR) floor trap 110mm bore, plain with grating including jointing with solvent cement all as specified and as directed.10Each
7474S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed.6Each
7575Taking up/down steel tubing and connections including cleaning for refixing or removal to store 15mm / 20mm bore pipes all as specified and as directed.100RM
7676S & F steel tubes, 15 mm bore, galvanised, \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specifed and as directed.50RM
7777S & F steel tubes, 20 mm bore, galvanised, \"medium grade\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work etc, complete all as specifed and as directed.50RM
7878S & F rotational moulded polyethylene water storage tank 500 Ltrs capacity, ISI marked (cylindrical vertical with closed top), double wall layer construction, hoisted and fixed in position complete all as specified in SSR Part-I, complete all as specified and directed.4Each
7979S & F in repairs bib cock long body with wall flange of Make : Jaquar, Cat No :ORP 10037PM or equivalent in Hindware/Cera/Parryware all as specified and directed.14Each
8080S & F in repairs 15mm bore Pillar tap, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered hot/cold with long screwed shank complete all as specified and as directed.4Each
8181S & F in repairs 15mm dia angular stop cock with wall flange of Make : Jaquar, Cat No: ORP 10053 PM or equivalent in Hindware /Cera /Parryware all as specified and directed.7Each
8282S & F in repairs 20 mm bore stop valves, fancy type, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or union, complete all as specified and as directed.3Each
8383S & F in repair ball valves high pressure of PTMT for 20mm bore pipe with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms), complete all as specified and as directed.2Each
8484S & F in repairs PVC connection suitable for 15 mm pipe with PTMT nuts and washers for both ends of length 450 mm long, complete all as specified and as directed.6Each
8585S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or providing cantilever brackets, PVC waste pipe and connecting union to pipe, overall size (915 mm x 460 mm), bowl size (410 mm x 330 mm x 160 mm) complete all as specified and as directed.3Each
8686S & F in repairs Vitreous china squatting pan water closet, orissa pattern, of size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) including PVC (SWR) 'S' trap, provision of lime concrete bedding and jointing to flush pipe complete all as specified and as directed.4Each
8787S & F in repairs 10 litres capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia PVC flushing pipe and 15 mm dia 450 mm long PVC connection with PTMT waste coupling complete all as specified and as directed.4Each
8888S & F in repairs looking mirror of size 600mm x 450mm bevelled edge mirror of selected quality glass 5.5mm thick, mounted on 6mm thick AC building board or commercial ply wood with PVC or aluminium 'C' channel beading all around and fixed to wooden plugs with chromium plated brass screws and cup washer, all as specified and as directed.4Each
8989S & F in repairs Viterous china, wash hand basin, (white) of size 550 mm x 400 mm, including PTMT waste coupling 32 mm dia with long screwed shank and fly nuts, PVC medium grade 32 mm dia waste pipe, chain and plug, porcelain stopper, with brass CP nuts and washers at both ends all as specified and as directed.4Each
9090M & L for flush pointing to random rubble masonry uncoursed brought up to courses in CM (1:4) complete all as specified and as directed.2.5Ten Sqm
9191M & L for hand packing with broken stone or boulders or loose filling with aggregate of gauge 40 to 80 mm in back of walls /Back side abutment at weep holes areas etc all as specified and directed.1.2Cum
9292Labour for Extra over stone walling for Hammer dressing to faces stones and dressing of face of beds and joints as specified of random rubble walling un coursed or brought up to course with maximum depression on face straight edge held against the dressing surface not exc 40mm all as specified and directed.20Sqm
9393M & L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in coping, cills, steps, in lintels upto 1.5m clear span and similar other works like kerb stone, bands, plinth courses, lacing courses, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work, complete all as specified and directed.5.5Cum
9494M & L for pre-polished coloured chequered cement concrete tiles, machine pressed, of size 300 x 300 x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry, laid in floors, over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.144Sqm
9595Demolition of RCC wall, slab, beam, columns of RCC water storage tank on roof at first, second and third floor, carefully without disturbing existing roof slab including removing the debris from the site to a distance exc 1.00 Km but n.exc 1.5 Km complete all as specified and directed by Engr-in-Charge.\nNote : If any damage occured during demolition shall be made good by the contractor free of cost.1Cum
9696Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed.50Sqm
9797M & L for hard core of broken stone or boulders n.exc 63 mm deposited, spread and levelled in layers n.exc 15cm thick, water and rammed to a surface complete all as specified and as directed.6Cum
9898Demolition of Brick tiles or terracing tiles, single layer on roofs laid, bedded and pointed in cement mortor and removing debris off the premises all as specified and directed.80Sqm
9999M & L for cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) 40mm thick as padding of roofs, finished fair and even complete all as specified and as directed.80Sqm
100100M & L for providing screed bed of 15 mm thick in CM (1:4) on concrete surface mixed with WPC as per manufacturer's instruction, finished fair and even for laying roof treatment all as specified and as directed.\nNote : WPC shall be measured and paid separately.80Sqm
101101M & L for laying 3mm thick APP modified water proofing membrane mineral finish, weighing not less than 3.6 Kg/Sqm, reinforced with non woven polyster matt black finished weighing not less than 100 gm/Sqm having softening point not less than 140 degree celsius longitudinal tensile strength not less than 300 N/Sqm, side lap & end lap 15 cm over a coat of bitumen primer @ 0.20 Kg/Sqm and finished all as per manufacturer's instruction and as directed by Engr-in-Charge.\nNote : The work shall be carried out by authorised applicators of manufacturer's.100Sqm
102102M & L for joint free anti -skid ceramic tiles 9 to 10 mm thick (square/ rectangular) area of each tile exc 0.18 Sqm but n.exc 0.36 Sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM (1:6) all as specified and as directed.10Sqm
103103M & L for glazed ceramic coloured tiles in bathroom of size 300 mm x 600 mm x 8-10 mm thick, as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry, pointed in white or coloured cement to match, laid over and including 10 mm thick rendering in CM (1:6) to receive tiles, complete all as specified and as directed.10Sqm
104104M & L for granite (of any type) slab 18 to 20mm thick, machine cut, including grinding, moulding, rounding the exposed edges and polishing, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone slab, laid over and including15mm thick screed bed in CM (1:4) complete all as specified and directed.4Sqm
105105Supply only liquid water proofing compound all as specified and as directed.7Ltrs
106106M & L for use and waste of timber as in formwork to sides and soffits of floor or roof beam, beam haunchings, griders, bressummers lintels, cantilivers, shelves including supports, overhangs, etc.,also splays between floors and beams all as specified and as directed.5Sqm
107107M & L for RCC (1:2:4) (Nominal Mix) type B-1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels, shelves, slab over 1.5m span complete all as specified and as directed.0.5Cum
108108M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.100Kg
109109As per item no 108 here-in-before, but 5mm dia and over in stirupps, spaces and binders complete all as specified and as directed.30Kg
110110M & L for preparation of new surface of wall with two coats of wall care putty and applying two coats of oil bound distemper over a coat of primer complete all as per manufacturer's instruction and as directed by Engr-in-Charge.150Sqm
111111M & L for preparation of new plastered external surfaces of wall by pplying two coats of acrylic emulsion exterior paint (weather coating) over one coat of primer after applying wall care putty complete all as per manufacturer's instruction and as directed by Engr-in-Charge.150Sqm
112112M & L for providing gypsum board false ceiling 10-12mm thick fixed with standard GI frame work with GI fixing channels @ 1220mm c/c and inter spaced at 610mm c/c the main fixing channels shall be fixed through GI channels suspenders from roof @ 1200 c/c, main and inter connected channel shall be fixed through fasterners clips as per manufacturer's instructions with and including plaster of paris decorative type cornice all around at the junction of wall and ceiling etc., complete all as specified and directed.5Sqm
113113M & L for preparing false ceiling with primer and applying one coat of smart care primer (Primer cum sealer) and applying two coats of Royal Aspira of approved colour by roller all as per manufacturer's instructions of Asian Paints Limited or equivalent in Nerolac /Berger as approved by GE complete all as specified and as directed.5Sqm
114114S & F MS fancy type decorative draphery rod 20mm dia including side caps and single /double brackets, including end bushes complete all as specified and as directed.10RM
115115S & F Rotational moulded polythene water storage tanks 1000 litres capacity, triple layer (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including dismantling water tanks and removing to store all as specified and as directed.1Each
116116S & F in repair health faucet of Make : Jaquar, Cat No : ALD-CHR 565 or equivalent in Hindware/ Cera / Parryware, including 1.2m long flexible tube and wall hook complete all as specified and as directed.1Each
117117S & F in repair soap dish holder of Make :Jaquar, Cat No - ACN - 1131N or equivalent in Hindware/Cera/Parryware all as specified and directed.1Each
118118S & F in repair towel rail 600mm long of Make: Jaquar, Cat No: ACN - 1111NM or equivalent in Hindware/Cera/Parryware all as specified and directed.4Each
119119S & F in repair 5.50mm thick looking mirror of size 900 x 600mm mounted on 6mm thick plywood backing or AC sheet backing including framing with first class hard wood of size 40 x 40mm decorative type polished and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed.1Each
120120Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and as directed.10Sqm
121121S & F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified and as directed.55Sqm
122122S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed.2Sqm
123123S & F second class hardwood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed.0.1Cum
124124S & F stainless steel wire cloth of 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or wire staple all as specified and as directed.20Sqm
125125S&F MS work as in hold fast, bands, straps, stays, wall ties, cleats etc and similar small articles conforming to (Fe-290 Gde-165) all as specified and directed.15Kg
126126M & L for complete removal of existing painting from the wooden joinery and sanding /preparing the old wooden surfaces by applying two coats of synthetic enamel paint over a coat of a pink primer etc., including providing half round /bevelled edge teak wood, fillets at glazing /wire mess sectional area n exc 3 Sqcm etc, complete all as specified and as directed.20Sqm
127127S & F steel windows with side hung shutter including friction hinges with steel handle and two Nos 100mm mild steel bolts and two peg stays on each opening shutter complete with glazing bars dove tailed or welded including a shop coat red oxide of zinc chrome primer complete all as specified and as directed.20Sqm
128128All as per item No 127 above, but without glazing bar including flat iron stiffener and suitable size nuts, bolts but without peg stays complete all as specified and as directed.20Sqm
129129Rough excavation n.exc 1.50m deep and getting out in any type of soil complete all as specified and as directed.150Cum
130130M & L for Precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed.27Cum
131131M & L for 75mm thick, cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of flooring all as specified and as directed.135Sqm
132132M & L for machine pressed precast concrete interlocking paver block (approved) any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade , laid over and including 50mm thick (Avg) crush stone sand (M sand) cushioning complete all as specified and directed.75Sqm
133133M & L for precast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in cover slabs with plain fair faces inclduding setting in CM (1:4) all as specified and as directed.\nNote : Reinforcement shall be measured and paid seperately.1Cum
134134M & L for mild steel round bars 10 mm dia and over, cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia all as specified and as directed.205Kg
135135S & F PVC ( SWR) pipes, type 'B', 160mm bore (OD), single socketed in any length,laid in trenches or in floors all as specified and as directed.60RM
136136M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150/160 mm bore all as specified and directed60RM
137137M & L for cutting into existing manholes for connnecting new drains 150 mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete (1:2:4) type B-I smooth finished ,and reforming benching as required all as specified and as directed.2Each pipe
138138Excavating in post holes (for similar holes) each n.exc 0.5 cu.m, and getting out in soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering, and removal surplus soil to a distance n.exc 50m and making good the disturbed surface all as specified and as directed.53Each
139139Dismantling wrought iron or mild steel work of any description not otherwise provided for including fencing etc all as specified and as directed.4Qtl
140140S & F for MS steel work as in posts and struts in fencing including cutting tops to shape as directed notching for wire etc., flat iron fillets (for securing wire mesh etc ) similar work conforming to Fe 410-0 all as specified and as directed.860Kgs
141141S & F mild steel screw bolts (machine made) screwed on end with hexagonal or square head at one head and to be fitted with nuts and washers 16 to 20 mm dia of neck and not exc 5 cm long all as specified and as directed.11Kgs
142142Supply only Chain link fencing MS galvanised fencing 50 x 50mm mesh and 2.90mm dia wire all as specified and as directed.500Kgs
143143Fixing only chain link MS galvanised fencing any size or type all as specified and directed by Engr-in-Charge.200Sqm
144144S & F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed wire with 2mm dia barbs at 100mm spacings and straining and fixing to any type of standard rails securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc., all as specified and as directed. \nNote : Each line wire to be measured.4100RM
145145S & F mild steel works as in ioist, channel, angle or tee sections, posts, rafters, purlins, trusses, connecting plates, etc., fixed independently conforming to Fe-410-W (Gde E-250) Quality-A all as specified and as directed.280Kg
146146Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and as directed.40Sqm
147147E/M PORTION\nTaking down old, unserviceable aluminium point wiring (light, fan, socket or power) complete, including fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as directed by Engr-in-Charge.87Point
148148Taking down old sub-main wiring including fixture & fittings etc., and removing unserviceable materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc., complete all as specified and as directed.95RM
149149Disconnecting /dismantling of old existing unserviceable DB's any way 240 /415 Volts with their old/unserviceable burnt MCB's all as specified and as directed.8Each
150150M & L for surface point wiring with 1.5 Sq mm, FRLS PVC insulated, single core, copper conductor cable, 1100 Volt grade, multi stranded in and including PVC capping casing medium grade for one light /exhaust fan /socket outlet 5 Amps independent/call bell point controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor green in colour connected to common earth and earth dolly, in and including PVC /polycarbonate rectangular block /boxes of suitable size & thickness with suitable PVC/polycarbonate cover for mounting switch, sockets etc.,complete all as specified and directed by Engr-in-Charge for the following :\n(a) One Light /fan/call bell point controlled by one switch 5/6 Amps.. \nMake : Havells/Finolex/Polycab \nNote :- (i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.62Point
151150.1(b) One switch socket out let point 5/6 Amps on same board.10Point
152150.2(c) One switch socket out let point 5/6 Amps on independent board.10Point
153151M & L for surface point wiring with two single core 2.5 Sqmm FRLS PVC Insulated, single core, copper conductor cable, 1100 volts grade, ISI marked with multi stranded in and including PVC capping casing medium grade in wall for 15/16 Amps switch-socket outlets etc., on independent board complete and including continuous 2.5 Sqmm PVC insulated single core copper conductor connected to common earth dolly, in and including PVC /polycarbonate rectangular block /boxes of suitable size & thickness with suitable PVC /polycarbonate cover for mounting switch, sockets etc.,complete all as specified and directed by Engr-in-Charge. \nMake : Havells/Finolex/ Polycab \nNote :- (i) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.5Point
154152M & L for surface sub-main wiring alongwith earth wire of size (2 x 4.0) Sq. mm + (1 x 4.0) Sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC capping casing (medium grade) with all fittings and accessories ISI marked complete all as specified & as directed. Note : Two runs of PVC wire, one run of earth wire & one run of PVC capping casing (medium grade) shall be measured as one length. \nMake : Havells/Finolex/Polycab.50RM
155153M & L for surface sub-main wiring alongwith earth wire of size (2 x 2.5) Sq. mm + (1 x 2.5) Sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC capping casing (medium grade) with all fittings and accessories ISI marked complete all as specified & as directed. Note :Two runs of PVC wire, one run of earth wire & one run of PVC capping casing (medium grade) shall be measured as one length. \nMake : Havells/Finolex/Polycab45RM
156154S & F switch socket combination, 5 in 1, 5/6 pin, 15 Amps flush type, 240 volts, ISI marked complete all as specified and as directed. \nMake : Havells / L & T/ Legrand / C & S / Anchor.5Each
157155S & F switch piano, flush button, single pole, one way, 5/6 Amps, 240 volts, ISI marked complete all as specified and as directed. \nMake : Havells / L & T/ Legrand / C & S/ Anchor.72Each
158156S & F switch socket outlet 5 Pin, 5/6 Amps flush type, 240 volts, ISI marked complete all as specified and as directed. \nMake : Havells / L & T/ Legrand / C & S/ Anchor.10Each
159157S & F socket out let 5 Amps, 240 volts, ISI marked complete all as specified and as directed. \nMake : Havells / L & T/ Legrand / C & S/ Anchor.10Each
160158S & F bell push, flush type, 5/6 Amps complete all as specified and as directed.\nMake : Havells / L & T/ Legrand / C & S/ Anchor.5Each
161159S & F call Bell, AC, Ding Dong type 230 Volts all as specified and as directed. \nMake : Anchor, Cat No: 8272 or equivalent in Legrand /C&S/Havells.5Each
162160S & F ceiling rose, PVC/polycarbonate, insulated body, 3 terminals and 240 Volts, ISI marked complete all as specified & as directed. \nMake: Havells/CG/Anchor16Each
163161S & F ultra slim elegance LED lighting fixture with extruded aluminium heat sink, 20 W, 4ft energy efficient and environmental friendly complete all as specified and directed by the Engr-in-Charge. Make : Havells, Cat No : LUMILINEPLUSBS\n20WLED865SPCSS or equivalent of Luker/Philips.10Each
164162S & F compact & sturdy LED decorative fixture (10 W) with extruded heat sink, multi purpose lighting in replacement of 2ft FTL fittings complete all as specified and directed. \nMake : Havells, Cat No: LUMILINEPLUSBS\n10WLED865SPCSS or equivalent of Luker/Philips.4Each
165163S & F decorative wall mounting fixture with opal PC diffuser suitable for lamps with B22 base with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit all as specified and as directed. \nMake: Havells, Cat No: LHDL07150099 ( For Fixture) or equivalent in Philips/Luker. \nMake:Havells, Cat No : LHLDERHEMD8X010 (for lamps) or equivalent in Philips/Luker. \nNote: The cost of making good and matching to the existing surface is deemed to be included in the unit quoted rates.10Each
166164S & F energy saving new generation 10 W LED, bulk head luminaire with opal diffuser with and including lamp LED 6000K complete all as specified and as directed. \nMake: Havells, Cat No: RUGBYNEONFT\n10WLED860SSYMTOPC or equivalent models in Philips/Luker.\n11Each
167165S & F exhaust fan, single phase, 250mm sweep, PVC body with their all accessories fixed properly on window/ stone wall surfaces of thickness not exceeding 50cm including making proper sized exhaust hole of 250 mm dia, Louver Shutter suitable for the same exhaust fan and which shall easily be operated with exhaust air pressure. Any disturbed surfaces of wall shall be made good by cement work/plastering and matching by existing colour white/colour wash including removing of old exhaust fan and connecting/testing complete all as specified and as directed.\nMake: Havells ,Code: Ventil Air-DX white or equivalent in Almonard/ Usha. \nNote : Old exhaust fan shall be handed over to MES stores.2Each
168166S & F sheet metal enclosure for 8 way DBs double door type 240 volts, 200 Amps rated bus-bar IP-43,IK-09 with metal door, including necessary connectionall as specified and as directed.\nMake: Havells,Cat No: DHDNSHODDW08 or equivalent in L&T/ Legrand.2Each
169167S & F sheet metal enclosure for 6 ways DBs double door type 240 volts, 200 Amps rated bus-bar IP-43,IK-09 with metal door, including necessary connection all as specified and as directed.\nMake: Havells,Cat No: DHDNSHODDW06 or equivalent in L&T/ Legrand.5Each
170168S & F sheet metal enclosure for 4 way DBs double door type 240 volts, 200 Amps rated bus-bar IP-43, IK-09 with metal door, including necessary connection all as specified and as directed.\nMake: Havells, Cat No: DHDNSHODDW04 or equivalent in L&T/ Legrand.1Each
171169S & F miniature circuit breakers, single pole,C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA all as specified and as directed. \nMake: Havells,Cat No :DHMGCSPF006-032 or equvalent in L&T/ Legrand.21Each
172170S & F miniature circuit breakers, SP & N, C-Series 240 Volts of capacity (6-32 Amps) as ordered breaking capacity 10 KA all as specified and as directed. \nMake:Havells, Cat No :DHMGCSNF006-032 or equivalent in L&T/Legrand.14Each
173171M & L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick burried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron earth lead of wire strip earthing 32 x 6 mm dia by means of GI bolts,nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in Electric Plate No 3 of SSR Part 1 and testing on completion including taking down old earthing complete all as specified and as directed by Engr-in-Charge.\nNote : On testing after completion, if the desired earth resistance is not obtained, the earthing will be redone at no extra cost.2Each Set
174172S & F in replacement PVC insulated flexible multicore round copper conductor cable of size 2 core 10 Sqmm including necessary end connector incl taking down unserviceable cable complete all as specified and as directed.\nMake: Havells, Cat No: WHMFDSKB2010 or equivalent of Finolex/Polycab.120RM

AI Tender Summary

OUR REF NO 22657451
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 31.50 Lakhs
LAST DATE 10-12-2019
Authority
Authority Name Military Engineer Services
Work Description Special Repairs To Power House No 2 , Servant Qtrs Of Race View , Craven And Certain Revenue Works At Dssc Wellington .
Basic Detail
Tender No 8086/E8
Bidding Type Tender
Location
City WELLINGTON
State Tamil Nadu
Key Dates
Publish Date 26 Nov 2019
Submission Date 10 Dec 2019
Open Date 12 Dec 2019
Finance
Tender Value 31.50 Lakhs
Tender Fee 500
EMD 63000
Exemption Not Available
Document List
BOQ_337729.xls
8086TENDER.pdf
Tendernotice_1.pdf
0531BF0A-4012-4A7D-B9C9-48B58BBFA168.html

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 26, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 10, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 12, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_337729.xls

pdf

8086TENDER.pdf

pdf

Tendernotice_1.pdf

html

0531BF0A-4012-4A7D-B9C9-48B58BBFA168.html

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender