Civil Works In Recording Theatre Renovation Inconnection With Ac System , Painting Work And Making Of Generator Shed At Chithranjali Studio , Thiruvallom
Tender Value
10.43 Lakhs
Estimated cost
Bid Submission
04 Dec 2019
0 days left
EMD
26000
Bank guarantee accepted
Document Fee
2950
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallam Thiruvanathapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Civil Works In Recording Theatre Renovation Inconnection With Ac System , Painting Work And Making Of Generator Shed At Chithranjali Studio , Thiruvallom
BOQ
| Name of Work: Civil Works in connection with Renovation of Main Recording Theatre, Chithranjali Studio, Thiruvallom | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Labour charges for Cleaning the Recording Theatre, Projection Room, Store etc. including stady socking of serviceable materials and disposal of unserviceable materials with in 100mtr. lead as per the direction of Engineer-in-charge | BI01010001010000000000000515BI0100001113 | 10 | E |
| 2 | 2 | Demolishing brick work in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar | BI01010001010000000000000515BI0100001114 | 2 | Cum |
| 3 | 3 | Dismantling wooden/steel doors, windows including removing shutters,chowkhats, architrave,holdfasts etc. complete and stacking within 50 metres lead :\nOf area 3 sq. metres and below | BI01010001010000000000000515BI0100001115 | 5 | E |
| 4 | 4 | Dismantling wooden/steel doors, windows including removing shutters,chowkhats, architrave,holdfasts etc. complete and stacking within 50 metres lead :\nOf area beyond 3 sq. metres | BI01010001010000000000000515BI0100001116 | 3 | E |
| 5 | 5 | Dismantling aluminium/Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge | BI01010001010000000000000515BI0100001117 | 25 | M2 |
| 6 | 6 | Dismantling steel work (Screen Frame) in built up sections in tubes,angles, tees, flats and channels including all gusset plates,bolts, nuts, cutting rivets,welding etc.manually/by mechanical means,dismembering &stacking the same and roofing sheets etc within 50 metres lead as per direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001118 | 1000 | Kg |
| 7 | 7 | Disposal of building rubbish / malba / glass wool/POP or similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or contractor's own risk at private place beyond 50 m initial lead, for all loads including all lifts involved. | BI01010001010000000000000515BI0100001119 | 20 | Cum |
| 8 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). for lintel and shade of all new brick walls, fire tank wall etc , ,. | BI01010001010000000000000515BI0100001120 | 4 | Cum |
| 9 | 9 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :\nAbove plinth walls , Lintels, beams, shade ,plinth beams, girders, fire tank wall and cantilevers | BI01010001010000000000000515BI0100001121 | 10 | M2 |
| 10 | 10 | Providing and Laying Cement concrete 1:3:6 using with 20mm metal for the flooring concrete in AHU room, Electrical room etc. | BI01010001010000000000000515BI0100001122 | 3 | Cum |
| 11 | 11 | Solid block masonry using pre cast solid blocks (Factory made) of size 40 x 20 x 15cm or nearest available size conforming to IS 2185 part I of 1979 for super structure above plinth up to floor V level, thickness 20cm and above in CM 1:6 (1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001123 | 5 | Cum |
| 12 | 12 | Repairing of metal door frames and shutters by renewing damaged frames and shutters using angle iron and MS sheets etc including screws and ,nails etc, renewing the hinges if necessary etc complete as directions by the engineer in charge etc complete, including cost and conveyance of all materils and all labour charges etc complete | BI01010001010000000000000515BI0100001124 | 3 | E |
| 13 | 13 | ALUMINIUM DOORS & WINDOWS: \nDismantling and refixing the existing aluminium doors and fxed partitions wherever necessary, ( Dismantling paid seperately) inlcuding cost and conveyance of all materials and labour charges etc complete | BI01010001010000000000000515BI0100001125 | 10 | M2 |
| 14 | 14 | Providing and fixing aluminium frame work for doors, windows, ventilators and partitions (FRAMEWORK ) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and as per the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : \nFor opening of manager room , projector room,& assistant manager room , partitions , front entrance fixed portion & windows etc.\nPolyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | BI01010001010000000000000515BI0100001126 | 60 | Kg |
| 15 | 15 | - Do - Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) | BI01010001010000000000000515BI0100001127 | 50 | Kg |
| 16 | 16 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge\nPre-laminated particle board with decorative lamination on both sides for aluiminium doors | BI01010001010000000000000515BI0100001128 | 40 | M2 |
| 17 | 17 | Structural steel work reveted , bolted or welded in builtup sections, trusses and framed work as per the drawing , including cutting hoisting fixing in position and applying a priming coat of approved steel primer, cost and conveyance of all materials and all labour charges etc complete including foundation work | BI01010001010000000000000515BI0100001129 | 500 | Kg |
| 18 | 18 | Steel work in built up tubular ( round, square or rectangular hollow tubes etc) trusses etc , including cutting , hoisting , fixing in position and applying a priing coat of approved steel primer including welding and bolted with sopaecial shaped washers etc complete (Generator, entrance gate & arch,new screen frame, over roof and sunshade all around the building ,purlins for fixing new sheet roof etc ) . | BI01010001010000000000000515BI0100001130 | 600 | Kg |
| 19 | 19 | Providing and fixing precoated galvanized iron profile sheet (size, shape and pitch of corrugation as approved by engineering charge) .50 mm (+0.05%) total coated thickness zinc coating 129 gm/sqmr as per IS 277, in 240 mpa steal grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during engineering charge. The sheet shall be fixed self drilling/self tapping screws of size (5.5 x 55mm) with EPDM seal, complete upto any pitch in horizontal/vertical or curved surfaces, excluding the coast of purlins , rafters and trussess and including cutting to size and shape wherever required for over the existing roof of building , generator platform and transformer platform etc., | BI01010001010000000000000515BI0100001131 | 50 | M2 |
| 20 | 20 | Providing ridges of hips of width 60 cm overall width plain GS sheet fixed with polimer coated J or L hooks, bolts and nuts 8mm dia. GI limpet and bitmin washes complete. .80mm thick with zinc coating not less than 275 gm/m2 | BI01010001010000000000000515BI0100001132 | 10 | m |
| 21 | 21 | Fabricating, Welding and fixing speaker hanging clamps using with M.S.Angles, Pipes etc. Fixing the one end of clamp in Rcc Slab or wall in correct position including all hire and labour charges for scafolding etc.\nCeiling clamp | BI01010001010000000000000515BI0100001133 | 16 | E |
| 22 | 22 | Fabricating, Welding and fixing speaker hanging clamps using with M.S.Angles, Pipes etc. Fixing the one end of clamp in Rcc Slab or wall in correct position including all hire and labour charges for scafolding etc.\nWall clamp | BI01010001010000000000000515BI0100001134 | 24 | E |
| 23 | 23 | Providing and fixing false ceiling with 12mm thick plough gypsum board or calcium silicate board fixing over the GI grid support at every 450mm x 450mm with permitted channel | BI01010001010000000000000515BI0100001135 | 125 | M2 |
| 24 | 24 | FLOORING \nProviding and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).( Basic price of tile Rs.55/ Sqft)\n600 mm x 600 mm | BI01010001010000000000000515BI0100001136 | 20 | M2 |
| 25 | 25 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete for new toilet floor, pump room & electricla room (Basic price- Rs.45/-) | BI01010001010000000000000515BI0100001137 | 65 | M2 |
| 26 | 26 | Repairs to plastering area of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls/ RCC surfaces / Ceiling by adding binding compound etc complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 fine sand). | BI01010001010000000000000515BI0100001138 | 20 | M2 |
| 27 | 27 | Plastering with cement mortar 1:4 (1 cement: 4 fine sand) for inside , out side of new walls 12 mm cement plaster finished with a floating coat of neat cement of mix for new plastered surface and old suraface wherever necessary for new rooms, fire tank,new projector room inside . | BI01010001010000000000000515BI0100001139 | 50 | M2 |
| 28 | 28 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand ( Birla white) and manufacturer, over the new plastered wall surface and old surface wherever necessary to prepare the surface even and smooth complete for interior & exterior new walls | BI01010001010000000000000515BI0100001140 | 150 | M2 |
| 29 | 29 | Painting priming coat on new plastered surfaces and old surfaces wherever necessary after making good the damages on wall surfaces and cleaning the surface including all charges for cost and conveyances, Labour charges etc. complete. \nwith water thinnable cement primer on wall surface having VOC contenet less than 50 gms/Ltr foe new walls | BI01010001010000000000000515BI0100001141 | 150 | M2 |
| 30 | 30 | Painting inside wall & ceiling with two coats with ready mixed acrylic emulsion paint approved quality as specified over priming coat after rubbing with sand paper and cleaning the surface including all charges for cost and conveyances, Labour charges etc. complete\nTwo or more coats | BI01010001010000000000000515BI0100001142 | 200 | M2 |
| 31 | 31 | Finishing exterior walls surfaces [over stuco finshed surface] with premium Acrylic smooth exterior paint [Apex/equivalent] with silicone additives of required shade, two or more coates applied @1.43ltr/10sq.m over and including primimg coat of exterior primer applied @ 2.20kg/10sq.m.after washing and cleaning the fungai including all scafolding for all heights. | BI01010001010000000000000515BI0100001143 | 200 | M2 |
| 32 | 32 | Polishing on wood work with 2 coat polyurethene polish (mat finish ) of approved brand and manufacture over 2 coat of wood putty , 2coat of sealer and wood primer etc , icluding cost and conveyance of all materials and labour cahrges etc complete. | BI01010001010000000000000515BI0100001144 | 10 | M2 |
| 33 | 33 | Painting with synthetic enamel paint using approved quality paint as specified two coats over a priming coat for new & old iron work including all charges for cost and conveyances, Labour charges etc. complete. | BI01010001010000000000000515BI0100001145 | 10 | M2 |
| 34 | 34 | Repairing, Providing and laying water proofing treatment over roof slab and sunshade by applying cement slurry mixed with water proofing cement compound consisting of applying: a) First layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242kg/sqm mixed with waterproofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corner, junctions of pipes and masonry with polymer mixed slurry. | BI01010001010000000000000515BI0100001146 | 100 | M2 |
| 35 | 35 | Plywood for speaker platform & poster board Supplying and laying 19mm thick Marine plywood over the frame work (paid separatly) with screws ,nut & bolts etc as per the detailed drawing ,including cost and conveyance of all materials , welding charges,unloading charges and all labour charges, polishing etc complete.(for Speaker plat form etc,) . | BI01010001010000000000000515BI0100001147 | 15 | M2 |
AI Tender Summary
Tender Timeline
Nov 25, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 04, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 07, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender