| 1 | 1 | Supply and Installation of Solar Panel incuding module stand (250 watt/ 24 V and above Mono Crystalline with 10 year warranty. Module stand with MS hot dip galvanized to minimum of 16 microns zinc coating thickness tilted to 13-15 degrees) | BI01010001010000000000000515BI0100001113 | 2 | Nos |
|---|
| 2 | 2 | Supply and installation of battery (Tubular))150AH/12V c10 grade battery with 5 year warranty | BI01010001010000000000000515BI0100001114 | 2 | Nos |
|---|
| 3 | 3 | Energiser (Energiser with 10KV Output Safety standards to be followed are BIS 302-2-76 IEC 335-2-76. Switch-high medium and low power setting. Solar panel option to recharge 12v battery Full and reduced power output terminals operate. Different fences independently with 5 Year warranty | | 2 | Nos |
|---|
| 4 | 4 | Charge Control Unit Maximum power point tracking charge control unit 12x48 volt battery auto sensing, 40 A charging Current | | 2 | Nos |
|---|
| 5 | 5 | Leadout Cable (Must be double insulated with standing 15KV voltages and inner core wire must be hot dip galvanized | | 60 | Mtr |
|---|
| 6 | 6 | Supply and fixing Corner Post assembly including cost of GI pipe cutting welding,painting and fixing (8ft, GI-2'', 14 guage thickness, 50 NB class ' B' pipe-Hot dip galvanized to more than 60 microns. Must include fasteners. | | 60 | Nos |
|---|
| 7 | 7 | Supply and Installation of Supporting Post 8ft, GI-1\", 14 guage thickness, 50 NB class ' B' pipe-Hot dip galvanized to more than 60 microns. Must include fasteners. | | 60 | Nos |
|---|
| 8 | 8 | Live Intermedate Post - including cost of T-angle, cutting, welding charges (8 ft., (25mmx25mmx3mm) T post or 16mm TMT rod hot dip galvanized more than 60 microns, bottom insulated to energize the entire post.) | | 400 | Nos |
|---|
| 9 | 9 | Super Strain Insulator (Must of poly polypropylene plstic rated for 15KV UV stabilized.) | | 360 | Nos |
|---|
| 10 | 10 | PP Reel Insulator (Must be of virgin plastic material. Polypropylene or equivalent.) | | 1200 | Nos |
|---|
| 11 | 11 | Joint Clamps (Spring steel capable of taking compression loads. Galvanized) | | 80 | Nos |
|---|
| 12 | 12 | Tension Spring (15 cm length, Withstand 400 Kg) | | 35 | Nos |
|---|
| 13 | 13 | Wire Tightener ( In suit tightners for proper\ntensioning of wires should be\nmade from Al-alloy non-rusting\nquality Mechanical Strength 500N) | | 130 | Nos |
|---|
| 14 | 14 | Gate Set (3 Gate Steel Rope with handle and spring assembly handle made of polyethylene | | 12 | Nos |
|---|
| 15 | 15 | Earth Device (Steel Rode with Warthing mixture 1.5\" pipe 6 ft length must contain earth mixture capable of retaining, moisture and 8 mm dia copper plated IS-3043 rod non rusting quality with earthing compound 10 kg/km | | 8 | Nos |
|---|
| 16 | 16 | Supply of 12 gauge ACSR wire For adding 2 strands ( 12 guage 2.5mm wire dia high tensile wire with minimum of 230-300 gms/sq.m zinc coated thickness UTS 140.5kg/mm2 break strength of 740 kgs Zn purity above 99% | | 680 | Nos |
|---|
| 17 | 17 | Supply of C Clamp 60 micron thick | | 160 | Nos |
|---|
| 18 | 18 | Supply of 14Gauge High Quality Zinc Coating wire for binding insulators | | 14 | Kg |
|---|
| 19 | 19 | Warning Sign Board (Polyethylene plastic with satutarory warning with signs.) | | 8 | Nos |
|---|
| 20 | 20 | Tool Kit (Wire tighting handle,twisting tool, pilers, double handed spanner ) | | 1 | Nos |
|---|
| 21 | 21 | Base Unit Box with stand (18 guage thickness steel Box (Lockable) - Painted. GI sheet,\npainted and fixed on 100NB, class and should be capable\nof housing battery and\nenergizer.) | | 1 | Nos |
|---|
| 22 | 22 | Digital Volt Meter must display fence voltage digitally upto 12 KV only made of non shocking plastic | | 1 | Nos |
|---|
| 23 | 23 | Installation charge including digging pits, fixing post, and installation of lines (4 km x 3 lines x Rs. 4) | BI01010001010000000000000515BI0100001127 | 12000 | mtr |
|---|
| 24 | 24 | Clearing boundary line to a width of 2 M wide fencing boundary (As per FSR Item 100a(2) 18.532 mm including VDA @155) (1000x2) | BI01010001010000000000000515BI0100001128 | 0.8 | Ha |
|---|
| 25 | 25 | Contract profit and over head Charge (15%) only for the Labour involved ie for the items No 23 & 24 (48000+4113) | | 1 | Ls |
|---|
| 26 | 26 | Quality & Testing Fees | | 1 | Ls |
|---|
