Road Transport and Highways Government Departments Closing in 0 days TDR #22604262

Construction Of Roads And Bridges-Mn07202 Bridge ( Span- 70 . 00M ) Over Arhing River At 3 . 00 Km ( Nungtek )

Issued by Government Departments · Tamenglong, Manipur
Tender Value
6.10 Crore
Estimated cost
Bid Submission
30 Nov 2019
0 days left
EMD
12.21 Lakhs
Bank guarantee accepted
Document Fee
20000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Rate Contract
Location / State
Tamenglong → Manipur
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Roads And Bridges-Mn07202 Bridge ( Span- 70 . 00M ) Over Arhing River At 3 . 00 Km ( Nungtek )

BOQ

Name of Work: Bridge (Span- 70.00m) over Arhing River at 3.00 Km (Nungtek) District : Tamenglong Block : Nungba
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.\nI. Ordinary Soil\n(i) Upto 3m depth472.79Cum
22Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\n1. P.C.C grade M 10\n(I) Nominal mix 1:3:627.11Cum
33Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\n(V) R.C.C. grade M 25435.78Cum
44Supplying, fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 120224.59MT
55Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 \nIV. RCC Grade M 25141.28Cum
66Supplying, fitting and placing TMT bar reinforcement (Fe 500) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 120214.02MT
77Supplying fabrication,Launcing Painting etc. complete for stuctural steel truss( Fy 250 n/mm2 incuding welding,splicing bolt etc all complete as per approved drawing and technical specefication at section 1900 of MORT & H198.66MT
88Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 \nRCC M25107.09Cum
99Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 120219.02MT
1010Providing and laying cement concrete wearing course M 30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.329.47Cum
1111Providing fitting and fixing mild steel railing complete as per drawing and technical specifications Clause 1208.2157.4Metre
1212Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm, complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their author11RM
1313Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.600MT
1414Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and clause 2003 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications.600MT
1515Drainage spouts complete as per drawing and technical specifications Clause 120930Nos
1616Reinforced Cement Concrete M 25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 121112.21Cum
1717Construction of Approach Road (160m)
1818Constrction of embankment with approved materials obtained from borrows pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slop and compacting to meet requirement of table 300.1 and 300.2 with lead upto 1000m as per Technic5416.47Cum
1919Construction of subgrade and earthen shoulders with approved materials obtained from borrow pits with lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.1 & 300.2 with lead upto 100041.3Cum
2020Granular Sub-base with Well Graded Material (Table 400.1)\nBy Mix in Place Method\nConstruction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.\n(i) For Grading I Material60Cum
2121Gravel/Soil-Aggregate Base (Table 400.2) Grading A\nConstruction of gravel/soil-aggregate base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller to achieve the desired density, complete as per Technical Specifications Clause 40260Cum
2222WBM Grading 3\nProviding, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.\n(B) By Mechanical Means45Cum
2323Primte Coat :\nLow porosity\n(i) Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502600sqm
2424Tack Coats Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503600sqm
252520 mm thick Open Graded Premix Carpet using Bitumen Emulsion as per Technical Specification Clause 508.2600sqm
2626Providing and laying seal coat with Bitumen Emulsion for sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510 Case II : Type B (By Manual means)600sqm
2727Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.11each
2828Providing and fixing of maintenance Board for PMGSY Project with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and bottom plate duly welded with MS flat iron 25mm x 5m size on back on edges. The plates will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frames of the plates will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.11each
2929Providing and fixing of Citizen's Information Board for PMGSY Project with Logo as per MORD specifications and drawing. Two MS Plates of 1.6 mm thick, top and bottom plate duly welded with MS flat iron 25mm x 5m size on back on edges. The plates will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frames of the plates will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.11each
3030Retaining Wall (Height = 3.00 m) 11 nos.
3131Excavation for Structures\nEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead
3232Ordinary soil
3333i) Upto 3m depth282.15Cum
3434Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nP.C.C grade M 10\nNominal mix 1:3:6
3535Wall Base74.25Cum
3636Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204\nIn cement mortar (1:3)
3737Random rubble masonry340.78Cum
3838Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing183Each
3939Breast Wall (Height = 2.50 m) 3 nos.
4040Excavation for Structures\nEarthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.\nUpto 3 m depth
4141Total Volume of Earthwork in Excavation55.62cum
4242Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203\nP.C.C grade M 10\nNominal mix 1:3:69.27cum
4343Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204\nIn cement mortar (1:3)
4444Random rubble masonry
4545Lower triangular part
4646Upper trapezoidal part81cum
4747Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing50Each
4848Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
4949Granular material9cum
5050Protection work in each Abutment location
5151Providing and laying pitching on slopes laid over prepared filter media as per drawing and technical specifications Clause 1302\nI. Stone/Boulder365.17Cum
5252Providing and laying filter material underneath pitching in slopes complete as per drawing and technical specifications Clause 1302109.55Cum
5353Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301405.38Cum
5454Maintenance component for 5(five) years after construction (not to be quoted yearwise)
55551st year Rs. 290759.02
56562nd year Rs. 436138.53
57573rd year Rs. 581518.04
58584th year Rs. 726897.55
59595th year Rs. 872277.05

AI Tender Summary

OUR REF NO 22604262
AUTHORITY Government Departments
TENDER VALUE 6.10 Crore
LAST DATE 30-11-2019
Authority
Authority Name State Rural Roads Development
Work Description Construction Of Roads And Bridges-Mn07202 Bridge ( Span- 70 . 00M ) Over Arhing River At 3 . 00 Km ( Nungtek )
Basic Detail
Tender No MN7202
Bidding Type Rate Contract
Location
City Tamenglong
State Manipur
Key Dates
Publish Date 21 Nov 2019
Submission Date 30 Nov 2019
Open Date 02 Dec 2019
Finance
Tender Value 6.10 Crore
Tender Fee 20000
EMD 12.21 Lakhs
Exemption Not Available
Document List
32B8C282-4521-4898-8C03-77F7FA651920.html
Tendernotice_1.pdf
SBDXI2.pdf
BOQ_149848.xls

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 30, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 02, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

32B8C282-4521-4898-8C03-77F7FA651920.html

pdf

Tendernotice_1.pdf

pdf

SBDXI2.pdf

xls

BOQ_149848.xls

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders