Supply Of Physiotherapy Equipments -Solid State Shortwave Diathermy ,Acutens Nthe Equipment Should Be An Advanced Microprocessor 4 Channel Tens Machine With Acupuncture Like Tens Capabilities. Nthe Equipent Should Be Light Weight Easy To Carry Less , Tar, Thiruvananthapuram-Kerala
TDR : 22588476
Tender Notice
BOQ
Expired
Thiruvananthapuram
Kerala
Supply Of Physiotherapy Equipments -Solid State Shortwave Diathermy ,Acutens Nthe Equipment Should Be An Advanced Microprocessor 4 Channel Tens Machine With Acupuncture Like Tens Capabilities. Nthe Equipent Should Be Light Weight Easy To Carry Less , Tar
Solid state shortwave diathermy – 500 w\n1. The equipment should have 200w average mean output\n2. It should use latest and advanced solid state power electronics not valve based technology\n3. It should not use any valve for generating output\n4. The equipment should have two modes. continues and pulsed modes,\n5. Pulsed mode should have 9 different settings.\n6. The equipment should have light weight flexible pads and cables\n7. The equipment should have the facility to use pad electrode and disc electrode.\n8. The equipment should have castor wheels for easy mobility\n9. It should work on wide range of input voltage from 180 to 240volts\n10. The equipment should work independently without the use for a voltage stabilizer\n11. It should have colour full bar graph to display low ,medium and high power output \n12. The total power consumption should be below 200w\n13. It should have necessary safety certificate from competent agencies.\n14. The equipment should not start operating if power selection knob is not at zero, and it should have audio and visual indication to indicate the same.\n15. It should have flexible pads.\n16. It should have three colour bar graph to indicate output power of low, medium & high.\n\n
item1
1
Nos
3
1.02
ACUTENS\nTHE EQUIPMENT SHOULD BE AN ADVANCED MICROPROCESSOR 4 CHANNEL TENS MACHINE WITH ACUPUNCTURE LIKE TENS CAPABILITIES.\nTHE EQUIPENT SHOULD BE LIGHT WEIGHT EASY TO CARRY LESS THAN 2KG\nIT HAS AUTOMATIC INTENSITY CONTROL WHICH MAKES IT VERY SAFE OPERATE. \nTHE EQUIPMENT SHOULD HAVE LCD DISPLAY WHICH DISPLAYS PARAMETERS LIKE TIME, INTENSITY OF ALL 4 CHANNEL SHOULD BE DIAPLAYED THERE.\nTHE EQUIPMENT SHOULD NOT BE BASED ON PREPROGRAMS \nTHE EQUIPMENT SHOULD HAVE TIMER TO SET TREATMENT TIME BASED ON KNOB SETTING IN STEPS OF 5,10,15,20 MINUTES MAXIMUM 20 MINUTES\nTHE EQUIPMNET SHOULD HAVE FREQUENCY STARTINFG FROM 1HZ TO 200 HZ AND PULDE WIDTH FROM 75 TO 360 MICROSECOND\nTHE EQUIPMENT SHOULD HAVE SYMMETRIC OUTPUT WAVEFORM \nTHE EQUIPMENT OUTPUT CURRENT SHOULD BE AT 0 TO 60MA AND OUTPUT VOLTAGE AT 0 TO 100VOLT PEAK TO PEAK \nTHE EQUIPMENT SHOULD HAVE INDEPENDENT INTENSITY CONTROL AND DISPLAY OF OUTPUT CURRENT FOR EACH CHANNEL.\nTHE EQUIPMENT SHOULD HAVE 4 KNOBS FOR EACH CHANNEL AND SEPARATE KNOB FOR SETTING AMPLITUDE AND SINGLE KNOB FOR SETTING FREQUENCY AND TIME \nIT SHOULD HAVE 12 V /500MA EXTERNAL INPUT POWERSOURCE /ADAPTOR AND POWER CONSUMPTION SHOULD BE LESS THAN 10 WATTS . \nDIGITAL DISPLAY OF OUTPUT CURRENT OF EACH CHANNEL AND TREATMENT TIME.\nTHE EQUIPMENT SHOULD ENSURE THAT THE MACHINE PRODUCES OUTPUT ONLY AFTER INTENSITY OF ALL 4 CHANNELS ARE AT ZERO.\nSMART CONTROL PREVENTS A PATIENT FROM ACCIDENTALLY RECEIVING A HIGH INTENSITY THAT WAS SET FOR THE PREVIOUS PATIENT.\nTHE 4- CHANNEL TENS UNIT SHOULD PROVIDES A WIDER FREQUENCY BAND.THEREBY ADVANCED TENS TREATMENTS CAN BE PERFORMED THRU MANUAL MODE\n
item2
1
Nos
4
1.03
TARGETED VIBRATION THERAPY SYSTEM\nShould be a Non Invasive High frequency Electro mechanical vibration therapy\nsystem ideally for the treatment of soft tissue conditions affecting muscles, ligaments,\nnerves, tendons and fascia.\nShould be ideal for the treatment of scar adhesions.\nShould have actuator head rotates eccentrically and vibrates on a frequency\nhigher than 150Hz.\nShould be a sleek, portable unit having different treatment surfaces built into one\nsystem.\nShould have a large treatment head for the superficial massage which also gives\ntherauptic thermal effect.\nShould have a soft tip for the application in bony areas and tips should have\nremovable silicon caps.\nShould have ON/OFF switch on the handle and must be provided a power chord of\nenough length.\nShould work on 220-230V, 50HZ AC Electrical power.\n
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
