Circular Lifting Magnet-Karnataka

Supply Of Circular Lifting Magnet, Circular Lifting Magnet For Lifting Cold As Well As Hot Material Up To 600Deg C In Foundry Environment. Deep Field Coil Design, Copper Wound For 220V Dc Operation. Heavy Duty Cast Magnet Designed For Severe Scrap Handling Duty. Similar To Ohio Make Model 66Dcwx, Confirming To The Following Specification For Single Magnet Characteristics- 1. Cold Current - 105 Amps Max. 2. Cold Power- 18.5 Kw 3. Self Weight Should Not Be More Than 5Ton Inclusive Of Chain, Bail And Other Accessories 4. Duty Cycle- Min. 50% At 10Minutes Cycle 5. Diameter Of Magnet: 66Inches -1 Inch +3Inch (1650Mm -25.5Mm/+50Mm) 6. Lifting Capacities Shall Not Be Less Than (A) Pig Iron: 1 H M - 5200 Lbs(2359Kgs) (B) 2 Broken: 2700 -3300 Lbs (1225?1497Kgs) (C) Steel Turnings: 1700 Lbs (771Kgs) Note: The Tolerance In Lifting Capacity Is -0 / +25% Of The Above Mentioned Ranges Under Sl.No.2 At All Operating Conditions. 7. Magnet Conductor Shall Be Of Premium Electrical Grade Copper With 99.99% Purity With Class H Insulation For Maximum Coil Life Under Severe Operation. 8. Magnet Shall Be Of High Grade Cast Steel Welded Construction Waterproof Strength. 9. Heavy Duty, Nonmagnetic Bottom Plate & Sealing Plate, Made Of Wear Resistant & Work Hardened Manganese Steel Shall Be Used To Protect The Coil From Damage Caused By Impact Including Bumping Plate. 10. Additional Protection From Moisture & Impact Is To Be Provided To The Coil With The Use Of Non-Magnetic Manganese Sealing Plate. 11. Heavy Duty, Annealed Alloy Steel 3-Legged Chain With A Master Bail Is To Be Provided. 12. Heavy-Duty Lugs & Pins Shall Be Provided To Connect The Chain To The Magnet. 13. Suitable Rating Surge Suppresser (Metro Cell) Shall Be Introduced In The Magnet. 14. All Relevant Tests And Test Certificates Shall Be Submitted Along With The Supply. ***Pl See Special Conditions For Continuation Of Description ***

Refer document

INR 58910.0 /-

Refer document

	0	1	2	3	4	5	6	7	8	9
0	S.No.	PL Code\r(Group)	Item Type\rGST(Y/N)	Stock /\rNonStock	Ordering	Consider\rFor Eval	Approving\rAgency	Inspection\rAgency	Currency\rAllowed	Estimated\rRate
1	1	63942689	Goods (Y)	Non Stock	---	Yes		CONSIGNEE	INR
2		Description :Circular Lifting Magnet for lifting cold as well as hot material up to 600deg C in foundry environment.\rDeep field coil design, Copper wound for 220V DC operation. Heavy duty cast magnet designed for severe scrap\rhandling duty. Similar to OHIO make model 66DCWX, confirming to the Following specification for Single Magnet\rcharacteristics- 1. Cold current - 105 Amps max. 2. Cold power- 18.5 kW 3. Self Weight should NOT be more\rthan 5Ton inclusive of chain, bail and other accessories 4. Duty cycle- min. 50% at 10minutes cycle 5. Diameter\rof magnet: 66inches -1 inch +3inch (1650mm -25.5mm/+50mm) 6. Lifting Capacities shall not be less than (a) Pig\rIron: 1 H M - 5200 lbs(2359Kgs) (b) 2 broken: 2700 -3300 lbs (1225?1497kgs) (c) Steel Turnings: 1700 lbs\r(771Kgs) NOTE: The Tolerance in lifting capacity is -0 / +25% of the above mentioned ranges under Sl.no.2 at all\roperating conditions. 7. Magnet conductor shall be of premium electrical grade copper with 99.99% purity with\rclass H insulation for maximum coil life under severe operation. 8. Magnet shall be of High grade cast steel\rwelded construction waterproof strength. 9. Heavy duty, nonmagnetic bottom plate & sealing plate, made of wear\rresistant & work hardened manganese steel shall be used to protect the coil from damage caused by impact\rincluding bumping plate. 10. Additional protection from moisture & impact is to be provided to the coil with the use\rof non-magnetic manganese sealing plate. 11. Heavy duty, annealed alloy steel 3-legged chain with a master bail\ris to be provided. 12. Heavy-duty lugs & pins shall be provided to connect the chain to the magnet. 13. Suitable\rrating surge suppresser (metro cell) shall be introduced in the magnet. 14. All relevant tests and test certificates\rshall be submitted along with the supply. ***Pl see special conditions for continuation of description ***
3		Consignee	SSE ELECL. WHEEL\rCONTROL	Karnataka	1.00 Numbers