Tender For Civil Works - Roads Work -Navada West Tola To Sh Road
Tender Value
59.21 Lakhs
Estimated cost
Bid Submission
30 Nov 2019
0 days left
EMD
1.18 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
PATORI → Bihar
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
tender for Civil Works - Roads work -Navada West Tola To Sh Road
BOQ
| Name of Work: Construction of Road & CD Works of Navada west tola To SH Road | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Construction of Reference & Working Benchmarks | 0.73 | Km | |
| 2 | 2 | Construction of Reference Pillars/Burjees | 0.73 | Km | |
| 3 | 3 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. | 0.37 | Hect. | |
| 4 | 4 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet equirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5. | 54.75 | Cum | |
| 5 | 5 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 | 849.07 | Cum | |
| 6 | 6 | Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (1000 M Lead) | 212.41 | Cum | |
| 7 | 7 | Box Cutting For Pavement Construction Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (100 M Lead) | 54.75 | Cum | |
| 8 | 8 | Construction of granular sub-base by providing well graded material (Crushed Stone Aggregates and Course Sand), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three wheel 80-100 kN static roller capacity to achieve the desired density, complete as per Technical Specification Clause 401 | 71.73 | Cum | |
| 9 | 9 | WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (Proposed PCC Road) | 207.36 | Cum | |
| 10 | 10 | Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade | 442.38 | Cum | |
| 11 | 11 | Laying brick soling layer on prepared sub-grade with brick on end edging according to lines, graded and cross-section shown on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolliing the same with three wheel road roller 80-100 kN as per Technical Specification Clause 412 | 365 | Sqm | |
| 12 | 12 | Ordinary Kilometer Stone (Precast) | 3 | Each | |
| 13 | 13 | 200 m stone (precast) | 3 | Each | |
| 14 | 14 | Boundary Pillar Reinforced cement concrete M15 grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and Technical Specification Clause 1704 | 14 | Each | |
| 15 | 15 | Providing and fixing of typical MMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 | 2 | Each | |
| 16 | 16 | Maintenance Board | 1 | Each | |
| 17 | 17 | Retro-reflectorised Traffic Signs :-600 mm equilateral triangle | 2 | Each | |
| 18 | 18 | 600 mm x 450 mm rectangular | 6 | Each | |
| 19 | 19 | 900 mm side octagon | 2 | Each | |
| 20 | 20 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Concrete Surface | 146 | Sqm | |
| 21 | 21 | Cable Duct Across the Road: Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum 450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings. | 15 | Rmt | |
| 22 | 22 | Planting of Trees and their Maintenance for one Year | 36.5 | No. | |
| 23 | 23 | GST @ 12% | 1 | No | |
| 24 | 24 | Labour Cess @ 1% | 1 | No | |
| 25 | 25 | 1st Year Maintenance cost | 0.73 | Km | |
| 26 | 26 | 2nd Year Maintenance cost | 0.73 | Km | |
| 27 | 27 | 3rd Year Maintenance cost | 0.73 | Km | |
| 28 | 28 | 4th Year Maintenance cost | 0.73 | Km | |
| 29 | 29 | 5th Year Maintenance cost | 0.73 | Km | |
| 30 | 30 | GST @ 12% | 1 | No | |
| 31 | 31 | Labour Cess @ 1% | 1 | No |
AI Tender Summary
Tender Timeline
Nov 21, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 30, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 04, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender