Housing Urban and Rular Development Local Bodies Closing in 0 days TDR #22580184

3 No . Kabaddi Courts In Nalagarh Constituency ( Sh -2 Nos . Kabaddi Courts At Gwaljakh In G . P . Baruna )

Issued by Local Bodies · NALAGARH, Himachal Pradesh
Tender Value
27.69 Lakhs
Estimated cost
Bid Submission
04 Dec 2019
0 days left
EMD
49100
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
NALAGARH → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

3 No . Kabaddi Courts In Nalagarh Constituency ( Sh -2 Nos . Kabaddi Courts At Gwaljakh In G . P . Baruna )

BOQ

Name of Work: 3 no. Kabaddi Courts in Nalagarh Constituency.( SH :-2 Nos. Kabaddi Courts at Gwaljakh in G.P. Baruna )
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 305.1 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.174.05P/Cum
22Providing and laying cement concrete 1:4:8 (1 cement :4sand :8 graded stone aggregate40 mm nominal size) and curing complete including cost of centering and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.30.01P/Cum
33Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to giv a fair finish including centring. shuttering. strutting and propping etc with wooden battens and ballies. height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu-reinforced concrete and plain concrete work in :- (i) Foundation footing basis of colmun etc. and mass concrete.141.88P/Sqm.
44Brick work using common burnt clay building bricks in foundation and plinth in :- Cement Mortar 1:6 (1 Cement : 6 Sand) Second Class Bricks44.53P/Cum
55Providind and laying cement concrete 1:1.5:3 ( 1 cement :1.5 sand :3 graded stone aggregate 20mm nominal size ) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :- Foundation & plinth90.99P/Cum.
66Providing mild steel/Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete up to floor two level :- TMT steel.5844P/ Kg.
77Steel work welded in built up section , trusses and framed work , including cutting,hoisting and fixing in position and applying a priming coat of red lead paint in Beams joists channel,angles tees flats with connecting plates or angle cleates as in main and cross beams , hip and jack rafter, purlins connected to common rafter and the like .34.49P/Qtl.
88Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.698.34P/Sqm.
99Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts &\nnuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges33.9P/Rmt.
101040 mm. Thick cement concrete flooring 1:2:4 (1cement :2 sand :4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement512P/Sqm.
1111Providing and fixing panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws.35mm thick 2nd class chil wood.67.43P/Sqm.
1212Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges jumb lock jamb,beed and if reuired angle threshold of mild steel angle of section 50X25 mm or base ties of 1.25 mm pressed mild steel welded or regidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel butt hinges 2.5 mm thick with guards,lock strike plate and shock absorber as specified and applying a coat of approved steel primer after pretretment of the surface as directed by Engineer-in-Charge.PROFILE -B324P/Rmt.
131315mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles , chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement mortar 1:6 (1 cement: 6 sand).224P/Sqm.
1414Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5.156P/Cum
1515Providing and laying Plain/reinforced cement concrete in open foundations complete as per drawings and technical specifications clauses 802,803,1202 &1203 P.C.C. 1:3:6 grade M -10. including cost of form work, centering, shuttering etc.175P/Cum.
1616Providing weepholes in brick masonary/ stone masonery plain / reinforced concrete abutment wing wall return wall with 100m m dia P V C pipe extendimg through the full width of the structures with slop of 1(v) :20 (H ) towards drawing face complete as par drawing and technical specification clauses 61456Each
1717Providing and laying ofInterlocking kabaddi mat of EVA & JSR ( Japanese Synthetic rubber ) of block type of thickness.35mm.260P/Sqm.

AI Tender Summary

OUR REF NO 22580184
AUTHORITY Local Bodies
TENDER VALUE 27.69 Lakhs
LAST DATE 04-12-2019
Authority
Authority Name Baddi Barotiovala Nalagarh Development Authority
Work Description 3 No . Kabaddi Courts In Nalagarh Constituency ( Sh -2 Nos . Kabaddi Courts At Gwaljakh In G . P . Baruna )
Basic Detail
Tender No BBNDA-06-ONLINE-2018-19 11846-56 DATE 18-11-19
Bidding Type Tender
Location
City NALAGARH
State Himachal Pradesh
Key Dates
Publish Date 21 Nov 2019
Submission Date 04 Dec 2019
Open Date 06 Dec 2019
Finance
Tender Value 27.69 Lakhs
Tender Fee 1500
EMD 49100
Exemption Not Available
Document List
9710E361-48C7-409D-BE89-41883F2225E1.html
Tendernotice_1.pdf
BOQ_47223.xls
SBD2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 06, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

9710E361-48C7-409D-BE89-41883F2225E1.html

pdf

Tendernotice_1.pdf

xls

BOQ_47223.xls

pdf

SBD2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender