Agriculture Government Departments Closing in 0 days TDR #22575181

Repairing Of Pecharthal S . S . Store At Pecharthal Under Kanchanpur Agri Sub-Division

Issued by Government Departments · Pecharthal, Tripura
Tender Value
1.95 Lakhs
Estimated cost
Bid Submission
04 Dec 2019
0 days left
EMD
2000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Pecharthal → Tripura
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repairing Of Pecharthal S . S . Store At Pecharthal Under Kanchanpur Agri Sub-Division

BOQ

Name of Work: Repairing of Pecharthal S.S. Store at Pecharthal under Kanchanpur Agri Sub-Division.
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Dismantling old plaster or pointing, raking out joints,\ncleaning and preparing the surface for re-plastering or re-pointing including disposal of rubbish to the\ndumping ground with all leads and lifts etc. complete as per direction of the Engineer- in-chargeBI01010001010000000000000515BI010000111285.66Sqm
22Dismantling GS sheet roofing including ridges, hips,\nvalleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the Engineer- in-chargeBI01010001010000000000000515BI01000011136Sqm
33Demolishing cement concrete manually / by\nmechanical means including disposal of material with all lifts and upto 50 m lead etc. complete as per\ndirection of the Engineer- in-charge:- Nominal concrete 1:3:6 or richer mix (i/c equivalent\ndesign mix)BI01010001010000000000000515BI01000011142.524Cum
44Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sqm and belowBI01010001010000000000000515BI010000111510No
55Providing wood work in frames of doors, windows,\nclerestory windows and other frames, wrought\nframed and fixed in position: Karai woodBI01010001010000000000000515BI01000011160.342Cum
66Providing and fixing panelled / or panelled and\nglazed shutters for doors, windows and clerestory\nwindows including ISI marked bright finished /\nblack enamelled M.S butt hinges with necessary\nscrews excluding panelling and or glazing, which\nwill be paid for separately but including the wooden\nbeading of 20 × 12 mm for fixing panelling and or\nglazing as per direction of Engineer-In-Charge. Local Teak wood, 35 mm thick shuttersBI01010001010000000000000515BI010000111711.05Sqm
77Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method completeBI01010001010000000000000515BI01000011181.927Cum
88Providing and laying in position cement concrete of\nspecified grade excluding the cost of centring and\nshuttering - -All work upto plinth level 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size)BI01010001010000000000000515BI01000011191.972Cum
99Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers including a coat of approved steel primer and two coats of approved paint complete\n0.63mm thick with zinc coating not less than 275gm/m2BI01010001010000000000000515BI010000112010mtr
101012 mm cement plaster of mix, In cement mortar 1 : 4 ( 1 cement : 4 fine sand)BI01010001010000000000000515BI0100001121111.82Sqm
1111Neat cement punning.BI01010001010000000000000515BI010000112249.83Sqm
1212Distempering with oil bound washable distemper of\napproved brand and manufacture and of required shade on new work ( two or more coats ), over and including water thinnable priming coat to give an even shade. [Payment shall be made after submission of Test Certificate issued by the Manufacturer]BI01010001010000000000000515BI0100001123181.61Sqm
1313Painting with synthetic enamel paint ( two or more\ncoats ) of required colour of approved brand and\nmanufacture on new work to give an even shade.\n[Payment shall be made after submission of Test\nCertificate issued by the Manufacturer]\nBI01010001010000000000000515BI010000112426.73Sqm
1414Finishing walls with water proofing cement paint of\nrequired shade of approved brand and manufacture on new work ( two or more coats applied @ 3.84 kg/10 sqm) complete. [Payment shall be made after\nsubmission of Test Certificate issued by the\nManufacturer]\nBI01010001010000000000000515BI010000112578.72Sqm
1515Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the\nManufacturer] With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel, galvanised iron / steel work.BI01010001010000000000000515BI0100001126104.74Sqm
1616Painting on G.S. sheet with synthetic enamel paint ( one or more coats ) of approved brand and manufacture of required colour to give an even shade on old work including preparation of surface as required complete as per direction of the Engineer in charge:-BI01010001010000000000000515BI010000112785.3Sqm
1717Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.BI01010001010000000000000515BI010000112836Cum
1818Flat Brick soiling Providing and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.BI01010001010000000000000515BI010000112952.5Sqm
1919Brick on edge soling Providing and laying brick on edge soling layer on prepared subgrade according to lines, grades and cross- section shown on the drawing, filling joints with sand, watering and rolling the same with three wheeled road roller 80-100 kN as per MoRD Technical Specification Clause 412.BI01010001010000000000000515BI010000113037mtr
2020Providing and laying 1st quality ceramic glazed floor\ntiles of approved size conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades as approved by Engineer-in-charge over 20 mm thick bed of cement mortar 1 : 4 (1 cement : 4 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete. Ceramic Glazed Tiles 1st quality 300 x 300mm in all shades and designsBI01010001010000000000000515BI010000113133.2Sqm
2121Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 ( thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 fine sand ) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade completeBI01010001010000000000000515BI010000113217.085Sqm
2222Half brick masonry work with first class bricks in\nsuperstructure upto floor five level including cost of\nall materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).BI01010001010000000000000515BI01000011332.1Sqm
2323Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement- RCC work in suspended floors, roofs having slope upto\n15° landings, balconies, shelves and chajjas 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick\naggregate 20 mm nominal size)BI01010001010000000000000515BI01000011340.959Cum
2424Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto floor five level. Thermo-Mechanically Treated bars/ Cold twisted\ndeformed steel barsBI01010001010000000000000515BI010000113586.31Kg

AI Tender Summary

OUR REF NO 22575181
AUTHORITY Government Departments
TENDER VALUE 1.95 Lakhs
LAST DATE 04-12-2019
Authority
Authority Name Department Of Agriculture
Work Description Repairing Of Pecharthal S . S . Store At Pecharthal Under Kanchanpur Agri Sub-Division
Basic Detail
Tender No 13/EE/AGRI/N/2019-20
Bidding Type Tender
Location
City Pecharthal
State Tripura
Key Dates
Publish Date 21 Nov 2019
Submission Date 04 Dec 2019
Open Date 04 Dec 2019
Finance
Tender Value 1.95 Lakhs
Tender Fee 1000
EMD 2000
Exemption Not Available
Document List
185F75C5-F2E1-44DE-A773-541BBF57E637.html
Tendernotice_1.pdf
BOQ_6784.xls
DNITPecharthal.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 21, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Dec 04, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

185F75C5-F2E1-44DE-A773-541BBF57E637.html

pdf

Tendernotice_1.pdf

xls

BOQ_6784.xls

pdf

DNITPecharthal.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders