Tender For Setup Of Fist Programme Grant (Dst New Delhi) Research Equipment – Fluorescence Spectrometer
Tender Value
20 Lakhs
Estimated cost
Bid Submission
11 Dec 2019
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
DCRUST, Murthal (Sonepat) → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Setup of FIST Programme Grant (DST New Delhi) research equipment – Fluorescence Spectrometer
BOQ
| Name of Work:- Setup of FIST Programme Grant (DST New Delhi) research equipment – Fluorescence Spectrometer | ||||
|---|---|---|---|---|
| Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1. 1. Excitation Source: ContinuousWavelength150 W Ozone free Xe arc lamp or better with power supply and Xe Flash Lamp source for Phosphorescence measurement.\n2. Optics: The system should be mirror based system for focusing at all wavelengths and precise imaging for nano/micro samples.\n3. Excitation Monochromator: Single Czerny-Turner design with 1200gr/mm grating (blazed in between at 300-330 nm or better\n4. Excitation measurable Wavelength Range: 200-950 nm or higher should be optimized in the UV\n5. Emission Monochromator: Single Czerny-Turner design with 1200gr/mm grating blazed in between at 500-550 nm\n6. Emission measurable Wavelength Range: 200-950nm or higher should be optimized in the Visible\n7. Bandpass: At least from0-30nm should be continuously adjustable from computer\n8. Wavelength Accuracy: Minimum±0.5 nm\n9. Scan speed: Minimum4800nm/min\n10. Signal to Noise Ratio: Minimum16,000:1(RMS Method), 6000:1 (FSD Method) using water Raman signal at excitation at 350nm, emission at 397nm, Band-pass 5nm and 1sec integration time. Vendors have to mention both FSD and RMS values.\n11. Reference Detector: The system should come with photodiode detector as standard for intensity correction\n12. Emission Detector: Photomultiplier tube detector should cover the wavelength range from 250nm-850nmand should operating in photon counting electronics mode\n13. Quartz Cuvette01ml &3.5ml reusable quartz cuvettes should be provided (two set)\n14. Solid Sample Holder: Should be provided for thin films, powders, pellets, paper, fibers, or microscopic slides and it should have variable alignment angle.\n15. Band-pass Filter: 320nm and 370nm or more band-pass filters should be provided along with the suitable adapter\n16. Order Sorting Filters: Set of 5 (2-inch x 2-inch diameter) filters cut-on at 370, 399, 450, 500 and 550nm should be provided for removing higher order spectrum\n17. Control and Analysis Software: Powerful software for data collection and system control. On start-up, the system automatically calibrates and presents itself for new experiments.\n18. Computer The branded computer with good configuration (i5 or higher) should be supplied with windows based operating system & micro soft office loaded with the system software and wireless multifunction printer.\n19. Optional items : Polarizer, Peltier for Temperature control measurement and Photomultiplier tube detector should cover the wavelength range from 200nm-1050nmand should operating in photon counting electronics mode\n20. Future Upgrade: System should be field upgradable to NIR measurement upto 1550nm and Time Resolved Measurement with TCSPC attachment. It is mandatory that the dead time should be 10ns and vendor has to provide the documentary proof for the same.\n\nWarranty: Should be of minimum one year( all components and labour) from the date of installation\n | 1 | Each |
AI Tender Summary
Tender Timeline
Nov 20, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 11, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 13, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender