Beautification Of Bachha Park And Construction Of Gate In Balmiki Basti , Ward No . 36 , Ballabgarh .
Tender Value
23.15 Lakhs
Estimated cost
Bid Submission
10 Dec 2019
0 days left
EMD
46300
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballabgarh → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification Of Bachha Park And Construction Of Gate In Balmiki Basti , Ward No . 36 , Ballabgarh .
BOQ
| Name of Work: Beautification of Bachha Park and Construction of Gate in Balmiki Basti, Ward No.36, Ballabgarh. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | S/F of stainless steel grade 304 fasteners for fixing dholpur stone. | BI01010001010000000000000515BI0100001114 | 2528 | Nos. |
| 2 | 2 | Providing and Fixing of HEXAGONAL GAZEBO 18x18 size consisting of the following features and specifications. \n(i) 6 No. ornamental design C.I. Pillar`\n Cast iron base pedestal with vertical fluted design having base width of size 225mmx225mm and height 900mm having 4 no. of size 20mm drilled in the base to put 4 no. of hold fasts of size 15mm thickness and 150mm length, the top edge of pedestal having 3 Nos. holes drilled and tapped for holding ‘C’ class M.S. pipe of size 89 mm and height 3000mm, the Central M.S. pipe having cast iron capital suitably mounted at appropriate height complete as per design enclosed. Complete pillar suitably grinded spray primered, dried and subsequently spray painted with two coats of enamel paints is required shade.\ni) 12 Nos. Spndred and 6 No. Frezes\nFloral and Ornate decorative design combination of Spandrel and Frieze, matched to be suspended Between two cast iron pillars as per the design copy enclosed. The Spandrel (L-Bracker) having length 475mm and height 400mm the frieze (Top Panel) height 250mmm and length as per the size of the Gazebo. The frieze mounted on M.S. Tabular pipe frame of size 40mmx25mm, frieze properly welded to the column pollars at either ends. Complete set of Spandrel & Frieze uniformly grinded spray primered, spray painted with two coats of enamel paint.\nii) 3 Nos. east iron base panels with frame\nFloral and Ornate decorative design east iron side panels as per design copy enclosed having height of 900mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 40x25mm. The bottom mild steel pipe having 3 Nos. of hold fasts in M.S. pipe of size 40x40mm and length 50mm welded at the base to hold the panel in the ground. The complete panel grinded for neat surface finishes spray primered, dried and subsequently spray painted with two coats of enamel paint in required shade.\n\niii) One set of top frame with roof.\nTop frame in M.S. tubular pipe of size 40x40mm properly welded and grinded. The top frame mounted with 18 gauge galvanized sheet of total width 180mm bent to profile on either ends with clear width installation of 140mm sheets fixed horizontally along the length between column pillars, each sheet powder coated in red colour on both sides. Horizontally fixed G.I. sheets top mounted with different profile G.I. sheets all along size edge above the column pillars to hide the horizontal joints. Each such sheet properly riveted to horizontal sheets. The roof pipe frames properly primered and painted in red colour. All complete including painting, transportation and errection at site etc. as per direction of Engineer in charge.\n | BI01010001010000000000000515BI0100001115 | 1 | Nos. |
| 3 | 3 | Shoulder wheel complete as per specification attached. | BI01010001010000000000000515BI0100001116 | 1 | Nos. |
| 4 | 4 | Knee Chair complete as per specification attached. | BI01010001010000000000000515BI0100001117 | 1 | Nos. |
| 5 | 5 | Shoulder shaper complete as per specification attached. | BI01010001010000000000000515BI0100001118 | 1 | Nos. |
| 6 | 6 | Parallel bars complete as per specification attached. | BI01010001010000000000000515BI0100001119 | 1 | Nos. |
| 7 | 7 | Back shaper complete as per specification attached. | BI01010001010000000000000515BI0100001120 | 1 | Nos. |
| 8 | 8 | Double skier complete as per specification attached. | BI01010001010000000000000515BI0100001121 | 1 | Nos. |
| 9 | 9 | Chest shaper complete as per specification attached. | BI01010001010000000000000515BI0100001122 | 1 | Nos. |
| 10 | 10 | Single skier complete as per specification attached. | BI01010001010000000000000515BI0100001123 | 1 | Nos. |
| 11 | 11 | Air walker complete as per specification attached. | BI01010001010000000000000515BI0100001124 | 1 | Nos. |
| 12 | 12 | Abbs shaper complete as per specification attached. | BI01010001010000000000000515BI0100001125 | 1 | Nos. |
| 13 | 13 | The horse complete as per specification attached. | BI01010001010000000000000515BI0100001126 | 1 | Nos. |
| 14 | 14 | Transportation of machines | BI01010001010000000000000515BI0100001127 | 11 | Nos. |
| 15 | 15 | Installation charges of machines | BI01010001010000000000000515BI0100001128 | 11 | Nos. |
| 16 | 16 | S/F of stain less steel grade 304 main gate and revolving gate | BI01010001010000000000000515BI0100001129 | 250 | Kg |
AI Tender Summary
Tender Timeline
Nov 20, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 10, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 12, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender