Name of Work: Supply, installation, testing and commissioning of 125 KVA D.G set at TCC Srinagar.
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
Supply, installation, mechanical erection, testing and commissioning of three phase 125 KVA diesel generator set KIRLOSKAR/Cummins make, turbo charged developing required BHP 1500 RPM under NTP with 10 % overloading factor, six cylinder engine with 175 HP, with microprocessor based digital display genset engine controller for monitoring, metering, protection, control system etc. conforming to latest Govt. Emission norms CPCB-II, ( Complete job)
2
1
No.
2
2
Carrying out foundation of PCC type, cement concrete to be carried in 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)in foundation of DG set etc including form work etc as required the job also includes supply and carriage etc of the requsite material upto the site.
3
8
cum.
3
4
Supply installation testing and commissioning of 1.1KV Aluminium armoured cable 185 mm sq. 3.5 core along with requsite No. of Al. Lugs for end termination.
4
105
Mt.
4
5
Providing of earthing by way of digging 10' deep pit then embedding 2'x2', 5mm thick copper plate connecting the plate with main control board by 10 SWG copper wire with 1/2\" dia. Full thread brass nut and bolt and washers. Refilling of pit with alternate layers of salt coal and earth.
5
2
No
5
6
Supply installation testing and comm.of main control panel ( 4'x3'x1.5') double door sheet steel 14 SWG powder coated phosphatised fitted with following accessories, and shall have angle iron stand to be grouted in the cement concrete.
6
6
7
a)400 amp. 4 strip bus 1 No.
7
7
8
b)Indicator set, V/A meter with selector switch.
8
8
9
c)4 pole change over 250 amp.Legrand/Schneider make.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
