Rural Development Government Departments Closing in 0 days TDR #22559877

Repair Of Zilha Parishad Prathamik School At Junasurla Tq-Mul

Issued by Government Departments · MUL, Maharashtra
Tender Value
12.35 Lakhs
Estimated cost
Bid Submission
28 Nov 2019
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
MUL → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Repair Of Zilha Parishad Prathamik School At Junasurla Tq-Mul

BOQ

Name of Work: REPAIR OF ZILHA PARISHAD PRATHAMIK SCHOOL AT JUNASURLA TQ-MUL (TOTAL 3 SCHOOL ROOM)T.S. NO. ---/R11/PO3/DPC-3EDU/2018-19 RS 1235500/-
Sl.No.Item DescriptionItem Code / MakeQuantityUnits
11Item No. 1 : Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.BI01010001010000000000000515BI010000111314per one number
22Item No. 2-Dismantling brick masonry in lime or cement mortar and stackingthematerils as directed with all leads, lifts etc.BI01010001010000000000000515BI01000011150.296per one cubic metre
33Item No. 3 -Removing W.C. pans including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the serviceable materials as adn where directed including throwing the unserviceable materiasls out side etc. carefully and throwing out the refusal outside etc. complete.BI01010001010000000000000515BI01000011161per one number
45Item No.5-Removing limeor lean cement concrete including stacking thespoilsas directed with all leads, lifts etc, complete.BI01010001010000000000000515BI01000011184.99per one cubic metre
56Item No. 6 :-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)BI01010001010000000000000515BI010000111918.42per one cubic metre
67Item No. 7 :-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.BI01010001010000000000000515BI010000112012.02per one cubic metre
78Item No. 8:- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.8 Page No. 302 and B.7, Page No.38BI01010001010000000000000515BI01000011218.01per one cubic metre
89Item No. 9:- Providing internal cement plaster 12 mm thick in a single coat in cement mortar 1:4 to concrete or brick surface in all positions including scaffolding and curing complete. Providing groove at joint of B.B.Masonry and concrete members complete. [2/BDL/2B,P NO-36] Spec.No.: Bd.L.2/Page No.368 .BI01010001010000000000000515BI010000112287.72per one square metre
910Item No. 10 :Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) FlooringBI01010001010000000000000515BI0100001123124.77per one square metre
1011Item No. 11 :Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) SkirtingBI01010001010000000000000515BI01000011249.72per one square metre
1112Item No. 12 :-Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete.BI01010001010000000000000515BI01000011255.7per one square metre
1213Item No. 13-Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.BI01010001010000000000000515BI010000112624.09per one square metre
1314Item No. 14 :-Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.BI01010001010000000000000515BI010000112728.3per one square metre
1415Item No. 15 :Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessaryBI01010001010000000000000515BI0100001128253.38per one square metre
1516Item No. 16 :- Providing and applying Two coats of wall care Putty on plastered surface and Ceilingan Wall stopreparesurfaceevenandsmoothofapproved make, etc complete.BI01010001010000000000000515BI0100001129438.49per one square metre
1617Item No. 17 :Providing and applying plastic emulsion paint of approved quality ,colour and shade to old and new surfaces in two coat sincluding scaffolding,preparingthesurface.(excludingtheprimercoat)etc.complete.BI01010001010000000000000515BI0100001130438.49per one square metre
1718Item No. 18 :- Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .BI01010001010000000000000515BI01000011319.9per one running metre
1819Item No. 19 :-Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.BI01010001010000000000000515BI01000011323.78per one square metre
1920Item No. 20:-Providing and fixing mild steel grill work for windows, ventilators, etc. required 15 kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.a) --------- do ---------- 20 Kg/Sqm. [1/BDU/1A,P NO-131] Spec.No.: Bd.U.1/Page No.537BI01010001010000000000000515BI01000011338.64per one square metre
2021Item No. 21 :Providing and applying TWO coat of flat oil paint of approved colour to the old structural steel work and iron work previously painted in building including scaffolding, if necessary, cleaning and preparing surface (excluding primer coat) etc. complete.BI01010001010000000000000515BI010000113421.12per one square metre
2122Item No. 22 :-Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without boxBI01010001010000000000000515BI01000011358.64per one square metre
2223Item No. 23 :-Providing and applying water proofing treatment using acrylic polymer\nmodified cement based water proofing coating with fibre glass mesh\nmixing at the rate of powder to liquid (2:1) by weight covering 9 to 10\nsqm /kg with two coat using approved chemicals for masonry and\nconcrete surface by brush covering 7 years guarantee on Stamp\nPapers etc. complete.BI01010001010000000000000515BI0100001136124.6per one square metre
2324Item No. 24:Providing and laying damp proof course 50 mm thick in M20 cement\nconcrete layer and bitumen / using cement with waterproofing\ncompound curing, formwork etc. complete.BI01010001010000000000000515BI0100001137124.6per one square metre
2425Item No. 25 :-Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 kg/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19 x 6 mm size steel screws including fixture fasting. Complete as per direction of engineer in charge\n.BI01010001010000000000000515BI01000011383.15per one square metre
2526Item No. 26 :-Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand.BI01010001010000000000000515BI010000113940.05per one square metre
2627Item No. 27 Providing and fixing white glazed earthenware Wash Hand Basin of 55cm. x 40 cm. size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.BI01010001010000000000000515BI01000011402per one number
2728Item No. 28 :- Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.BI01010001010000000000000515BI01000011412per one number
2829Item No. 29:-Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer is necessary before use)\nBI01010001010000000000000515BI01000011421per one number
2930Item No. 30 :Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.BI01010001010000000000000515BI01000011431per one number
3031.01Item No. 31 :- Providing and fixing 8 cm rigid PVC Nahani trap including PVC grating ,bend, connecting piece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)BI01010001010000000000000515BI01000011444per one number
3132.01Item No. 32:Providing, laying and fixing P.V.C. pipe of 110mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.BI01010001010000000000000515BI010000114510per one running metre
3233.01Item No. 33-Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.BI01010001010000000000000515BI01000011462per one number
3334Item No. 34-Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BI01010001010000000000000515BI010000114715per one running metre
3435Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BI01010001010000000000000515BI010000114815per one running metre
3536Providing and fixing on walls/ ceiling/ floors, 32 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.89 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BI01010001010000000000000515BI010000114915per one running metre
3637Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BI01010001010000000000000515BI01000011506per one running metre
3738Providing and laying in trenches 15 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.BI01010001010000000000000515BI01000011513per one running metre
3839Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.BI01010001010000000000000515BI01000011524per one number
3940Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut completeBI01010001010000000000000515BI01000011534per one number
4041Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. CompleteBI01010001010000000000000515BI01000011549per one running metre
4142Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 litersBI01010001010000000000000515BI01000011551000per one litre
4243Providing 25 mm to 30 mm thick partition of polished black kadappa stone slab of approved quality including giving required size and shape etc. Fixing in cement mortar 1:3 curing and cement etc. complete. b) Both side polishBI01010001010000000000000515BI01000011561.62per one square metre
4344Providing and fixing M.S.grill door 24kg/sqm of various size as per detailed drawing swith out hot dip coating,iron fixture sand fastening sand 3 coats of oil painting etcBI01010001010000000000000515BI01000011574.62per one square metre
4445Providing and fixing crimped with G.I. mesh and size 20mmx20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat ,fixing the frame in it so riginal position and oil painting etc.complete ( excluding cost of structural steel)BI01010001010000000000000515BI010000115836.9per one square metre
4546Removing mud plaster including disposing of the spoil sas directed with all leads, lifts etc, complete.BI01010001010000000000000515BI0100001159297.24per one square metre
4647Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.BI01010001010000000000000515BI0100001160253.38per one square metre
4748Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the unction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire\netc. complete.BI01010001010000000000000515BI010000116136per one running metre
4849Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38BI01010001010000000000000515BI01000011622.4per one cubic metre
4950Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.8 Page No. 302 and B.7, Page No.38BI01010001010000000000000515BI01000011633.07per one cubic metre
5051Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking\nthe bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306BI01010001010000000000000515BI01000011640.47per one mattric tonne
5152Providing and laying in situ / ready mix controlled grade of M15 of\ntrap /granite /quartzite /gneiss metal for RCC works in cut off walls /\ncurtain walls including necessary scaffolding, centering, compacting by\nvibrator, finishing and curing etc. complete. (with fully automatic\nmicro processor based PLC with SCADA enabled with reversible drum\ntype mixer/ concrete batch mix plant (pan mixer) with natural\n/artifical sand, excluding reinforcement)BI01010001010000000000000515BI01000011652.75per one cubic metre
5253Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular of steel sheet painted with one coat of Zinc chromate stoving 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel shape painted with one coat of zinc chromate - stoving primer and two coats green back ground white border/messages, symbols etc. and back side in grey stove enamel paint including M.S. angle frame of 35 mm x 35 mm x 3 mm and two M.S.angle iron post of size 50 mm x 50 mm x 5 mm, 3.65 m long properly cross braced with angle iron of size 50 mm x 50 mm x 5 mm duly painted with alternate black and white bands of 25 cm width including G.I.fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. Spec. No. : As per IRC-67, 1977 & M.O.R.T & H Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994BI01010001010000000000000515BI01000011661PER ONE NUMBER

AI Tender Summary

OUR REF NO 22559877
AUTHORITY Government Departments
TENDER VALUE 12.35 Lakhs
LAST DATE 28-11-2019
Authority
Authority Name Rural Development Department
Work Description Repair Of Zilha Parishad Prathamik School At Junasurla Tq-Mul
Basic Detail
Tender No WORKS_ZP_CHANDRAPUR_19_19_20
Bidding Type Tender
Location
City MUL
State Maharashtra
Key Dates
Publish Date 19 Nov 2019
Submission Date 28 Nov 2019
Open Date 29 Nov 2019
Finance
Tender Value 12.35 Lakhs
Tender Fee 1000
EMD 13000
Exemption Not Available
Document List
BOQ_894552.xls
junasurla_Royalty46.pdf
371D7499-EF54-4B15-B3F2-D9632088F467.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2019
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2019
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Nov 29, 2019

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894552.xls

pdf

junasurla_Royalty46.pdf

html

371D7499-EF54-4B15-B3F2-D9632088F467.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders