Construction Of One Class Room Building At Z . P . Primary School Kelzar , Tal-Mul
Tender Value
13.86 Lakhs
Estimated cost
Bid Submission
28 Nov 2019
0 days left
EMD
14000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MUL → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction of One Class Room Building At Z . P . Primary School Kelzar , Tal-Mul
BOQ
| NAME OF WORK :- C/O ONE CLASS ROOM BUILDING AT Z.P. PRIMARY SCHOOL ,KELZAR,TAL:-MUL ,DIST:- CHANDRAPUR (T.S.No.- 84/R12/PO3/DPC-Edu/2019-20 Rs. 16,39,800 /-) | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259 | BI01010001010000000000000515BI0100001113 | 58.23 | Cum |
| 2 | 2 | Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering etc complete. ( Including Royalty) Spec. No. : As directed by Engineer-in-charge. | BI01010001010000000000000515BI0100001114 | 17.58 | Cum |
| 3 | 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287 | BI01010001010000000000000515BI0100001115 | 15.31 | Cum |
| 4 | 4 | Item No. 4:- Providing and laying in situ cement concrete of required grade of trap / granite/ quartzite / gneiss metal for R.C.C. work in foundations like raft, grillages, strip foundations and footings of R.C.C.columns and steel stanchions including bailing out water, plywood/steel formwork, compaction, curing and roughening the surface if special finish is to be provided, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give smooth and even surface etc. complete. (Excluding reinforcement and structural steel, including cover block) The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) 2/BD.F/3,P NO-13] M-20 | BI01010001010000000000000515BI0100001116 | 8.71 | Cum |
| 5 | 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.5 Page No. 300 and B.7, Page.No. 38 | BI01010001010000000000000515BI0100001117 | 5.09 | Cum |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.6 Page No. 300 and B.7, Page No.38 | BI01010001010000000000000515BI0100001118 | 9.39 | Cum |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.8 Page No. 302 and B.7, Page No.38 | BI01010001010000000000000515BI0100001119 | 9.77 | Cum |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd.F.9 Page No. 303 and B.7, Page No.38 | BI01010001010000000000000515BI0100001120 | 0.62 | Cum |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | BI01010001010000000000000515BI0100001121 | 0.39 | Cum |
| 10 | 10 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring Bd.M. 12 Page No.385. | BI01010001010000000000000515BI0100001122 | 46.2 | sqm |
| 11 | 11 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting Bd.M. 12 Page No.385 | BI01010001010000000000000515BI0100001123 | 31.77 | sqm |
| 12 | 12 | Providing and laying 25mm thick precast polished chequered coloured cement tiles 25 cm x 25 cm x 25 mm thick of approved colour and pattern with white and coloured marble chips upto maximum size 6mm for flooring in required position set on bed of C.M. 1:6 including neat cement float, filling joints with neat coloured cement slurry, curing polishing and rubbing complete | BI01010001010000000000000515BI0100001124 | 13.2 | sqm |
| 13 | 13 | Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. As director by engineer in charge and BDG- 2 and 5 | BI01010001010000000000000515BI0100001125 | 6.71 | Cum |
| 14 | 14 | Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteAs director by engineer incharge and BDG- 2 and 5 | BI01010001010000000000000515BI0100001126 | 16.95 | Cum |
| 15 | 15 | Filling in plinth and floors with contractoRs. approved material / murum / stone dust in 15cm. to 20cm. layeRs. including watering and compaction complete.( Including Royalty) [8/BDA/11,P NO-4] Spec. No. : Bd.A. 11/Page No. 263 | BI01010001010000000000000515BI0100001127 | 15.47 | Cum |
| 16 | 16 | Providing and fixing cold rolled steel hollow door frame 105mmx 60mm for anysizes including hold fast hinges, tie memberswith red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including\nanticorrosive treatment as directed by the engineer. | BI01010001010000000000000515BI0100001128 | 10.4 | RMT |
| 17 | 17 | Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the\nwood work with oil painting 3 coats complete | BI01010001010000000000000515BI0100001129 | 4.2 | Sqm |
| 18 | 18 | Supplying and fixing in position Aluminium extruded section three track sliding windows upto 1.2 metre height, outer frame made from section of over all size 80 mm x 45 mm, bottom section with or without drain section, track weighing 0.90 kg per metre and top and side section weighing 0.838 kg per running metre with shutter or sections made of 19 mm x 40 mm size having average weight of 0.6 kg per running metre(or as required size) with change in proportionate weight,with 5.00 mm selected quality plain sheet glass fixed with new neoprene gasket shutters to be provided with nylon encased stainless rollers, necessary locks and handles complete. | BI01010001010000000000000515BI0100001130 | 2.52 | Sqm |
| 19 | 19 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box | BI01010001010000000000000515BI0100001131 | 7.2 | Sqm |
| 20 | 20 | Providing and fixing mild steel grill work for windows, ventilators, etc. required kg/sqm as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete.a) --------- do ---------- 20 Kg/Sqm. [1/BDU/1A,P NO-131] Spec.No.: Bd.U.1/Page No.537 | BI01010001010000000000000515BI0100001132 | 16.85 | Sqm |
| 21 | 21 | Providing internal cement plaster 20mm thick in a single coat in cement mortar 1:5 to concrete, brick surfaces in all positions including scaffolding and curing. Providing groove at joint of B.B.Masonry and concrete members complete. Spec.No.: Bd.L.4/Page No.368 | BI01010001010000000000000515BI0100001133 | 169.11 | Sqm |
| 22 | 22 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No. 369 | BI01010001010000000000000515BI0100001134 | 110.65 | Sqm |
| 23 | 23 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Spec.No.: As directed by Engineer in charge. | BI01010001010000000000000515BI0100001135 | 169.11 | Sqm |
| 24 | 24 | Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. | BI01010001010000000000000515BI0100001136 | 169.11 | Sqm |
| 25 | 25 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc.complete. | BI01010001010000000000000515BI0100001137 | 110.65 | Sqm |
| 26 | 26 | Providing and fixing in position reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams and columns, canopies, staircases, newels, chajjas, lintels, pardies, coping, fins, arches etc. as per detailed design and drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required completed. [20/BDF/17,P NO-27] Spec.No.: Bd.F.17/Page No.306 b) For TMT / HYSD steel bars | BI01010001010000000000000515BI0100001138 | 3.86 | M.T. |
| 27 | 27 | Providing and fixing in position Shelves of polished Kaddappa / Marble / Granite stone of required thickness ,including making groove in wall / concrete surface filling joints with slurry, curing, polishing, rounding edges, as required cleaning etc. complete. a) Kadappa shelves 25 mm to 30 mm thick Spec.No.: As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001139 | 1.94 | sqm |
| 28 | 28 | Providing sills of polished Kota stone 25 mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. | BI01010001010000000000000515BI0100001140 | 2.26 | sqm |
| 29 | 29 | Providing and laying in situ, cement concrete M-15 of trap/ granite/quartzite/gneiss metal for foundation and bedding including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface, curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.)Spec. No. : Bd.E. 1/Page No. 287/I.S. 456 (2000) 4 BDE 1 | BI01010001010000000000000515BI0100001141 | 7.34 | Cum |
| 30 | 30 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular of steel sheet painted with one coat of Zinc chromate stoving 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel shape painted with one coat of zinc chromate - stoving primer and two coats green back ground white border/messages, symbols etc. and back side in grey stove enamel paint including M.S. angle frame of 35 mm x 35 mm x 3 mm and two M.S.angle iron post of size 50 mm x 50 mm x 5 mm, 3.65 m long properly cross braced with angle iron of size 50 mm x 50 mm x 5 mm duly painted with alternate black and white bands of 25 cm width including G.I.fixtures etc. and fixing the board in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including transportation etc. complete. Spec. No. : As per IRC-67, 1977 & M.O.R.T & H Circular No. RW/NH-33023/31/88 D.O.III Dated 2-5-1994 | BI01010001010000000000000515BI0100001142 | 1 | sqm |
AI Tender Summary
Tender Timeline
Nov 19, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 28, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 29, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender