Construction (Upgradation Of Existing 0.25 Mld Stp) And Supply, Installation, Testing And Commissioning Of Electro Mechanical Equipments To 1.20 Mld Sewage Treatment Plant At Nimahns Campus-Karnataka

Construction (Upgradation of existing 0.25 MLD STP) and supply, installation, testing and commissioning of electro mechanical equipments to 1.20 MLD sewage treatment plant at NIMAHNS campus 1. ksrb 2.2.2: earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications. specification no. kbs 2.1 (b)/2.3.5(p.5/2.4), 2. ksrb 3.2: providing and injecting chemical emulsion for pre constructional anti-termite treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, hom of equipments, complete as per specification. (plinth area of the building at ground floor only shall be measured) specification no. kbs 3.2.6/3.2.7 (p.9/3.2), 3. ksrb 4.1.3: providing and laying in position plain cement concrete of mix m 1:4:8 with opc cement @ 180 kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @ 0.57cum machine mixed,machine mixed concrete laid in layers not exceeding 15cms thick, well compacted, in foundation including cost of all materials, labour, hom of machinery, curing complete as per specifications. specification no. kbs 4.1.4.2 (p.12/4.3), 4. ksrb 4.6.4: providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. specification no. kbs 4.6.2 (p.15/4.31), 5. ksrb 4.6.2: providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as roofs, landings, balconies and likes, thickness upto 200mm including cost of all materials, labour complete as per specifications up to 3.50 m from ground level. specification no. kbs 4.6.2 (p.15/4.18), 6. ksrb 4.6.10: providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications. specification no. kbs 4.6.2 (p.16/4.37), 7. ksrb 4.6.8: providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications. specification no. kbs 4.6.2 (p.16/4.35), 8. ksrb 4.2.1: providing and laying in position reinforced cement concrete of design mix m25 with opc cement @ 340 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregates @ 0.47cum, with superplasticiser @ 3 ltrs confirming to is 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not excceding 15 cms thick, vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness) including attached plasters, column pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, hom of machinery, curing, complete as per specifications. specification no. kbs 4.1.4.6 (p.13/4.10), 9. ksrb 4.2.11: providing and laying in position reinforced cement concrete of design mix m20 with opc cement @ 27.20 kgs, with 12mm and down size graded granite metal coarse aggregates @ 0.05865cum and fine aggregates @ 0.0391cum, with superplastisiser @ 0.225 ltrs., machine mixed, well compacted for plain chajja of 8.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, hom of machinery, curing, complete as per specifications. specification no. kbs 4.1.4.6 (p.14/4.20), 10. ksrb 4.9.2: providing tmt steel reinforcement for rcc work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, hom of machinery complete as per specifications. specification no. kbs 4.6.3 for tmt bars fe 500 (p.17/4.46.2), 11. ksrb 6.2.4: providing and constructing burnt brick masonry with approved quality of non- modular bricks of standard size of class designation 5.0 newton per sqmm with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specification. specification no. kbs 6.2 (p.27/6.7), 12. ksrb 5.2.3: providing and constructing granite/trap/basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in course not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. kbs 5.1.13 (p.23/5.6), 13. ksrb 7.9: providing and fixing ms grill work for windows and ventilators using ms flats, or ms square rods, or combination of ms flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and hom of machinery complete as per specificaitons. specification no. kbs 7.12 (p.32/7.9), 14. ksrb 7.10: providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section o f size 61.85x31.75mm with 1.2mm thcik, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm thick weight 0.659 kg/m: and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg/m: shutter outer side 40mmx18mm, 1.25mm thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc., and providing and fixing 5.5mm thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any specification no. kbs -do- using aluminium section powdered coated to a minimum of 60 - 70 microns with exterior durable pure polyester grade powder of approved quality. (p.33/7.10.2), 15. ksrb 15.3.8: providing 18mm thick cement plaster in signle coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (p.113/15.16), 16. ksrb 15.15.1: providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. with primer (p.117/15.51.2), 17. providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification.(p.126/15.106), 18. ksrb 15.7: providing lime rendering for plastering to wall and ceiling, including cost of materials, labour, curing complete as per specifications. (p. 115/15.33), 19. ksrb 15.18.2: providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.(p.121/15.74), 20. providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. (p.125/15.104), 21. ksrb 4.1.5: providing and laying in position plain cement concrete of mix m20 with opc cement @ 300 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.43cum machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted, in foundation, plinth, and cills including cost of all materials, labour, hom of machinery, curing complete as per specifications. specification no. kbs 4.1.4.2 (p.12/4.5), 22. ksrb 2.4: refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specifications.(p.6/2.11) supplying and fixing m.s. rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in cc (1:2:4) with 2 nos. 16mm dia m.s. hold fast rods each of length 25 cms. including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead and lifts and as per the directions of the engineer-in- charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting. (excluding cost of earth work and concrete) ( p. 262/37.2), 23. supplying and fixing m.s. rectangular poles made out of 2 equal angles of 65x65x6 mm welded together and fixed in cc (1:2:4) with 2 nos. 16mm dia m.s. hold fast rods each of length 25 cms. including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead and lifts and as per the directions of the engineer-in- charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting. (excluding cost of earth work and concrete) ( p. 262/37.2), 24. providing and fixing m.s. block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the two verticle poles (m.s. rectangular poles) and spot welding the chain link with m.s. block pipe including cost of all materials wastage in cutting, and scaffolding wherever necessary with all lead and lift as directed by the engineer-in-charge of work etc., complete including two coats of approved quality paint over one coat of shop paint. ( p.262/37.4), 25. providing chain link fencing 50 mm size of 8 quage properly stretched between rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts and as per direction of the engineer-in-charge of work including two coats of approved quality paint over one coat of shop paint. ( p. 262/37.3), 26. shifting of debris with loading, unloading ,transporation charges for 1.0 km with all lead and lift as per direction of the engineer in charge of work (p140), 27. ksrb 4.4.1: extra for use of water proofing compound in cement concrete of mix m 1:1:2, at one kg of compound pr bag of cement. specification no. kbs (p.14/4.24), 28. ksrb 15.4.4:extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortat 1:4, 18mm thick cost of materials complete as per specifications.(p.113/15.26), 29. providing and applying composite water proofing compound as impregnate only on wet surfaces to arrest leaks in surfaces to arrest leakes in surfaces such as roof cealing, internal and external walls, flooring and other surfaces apart from water tanks, sumps, reservoirs, by mixing the composite water proofing compound with water in ratio of 1:10 to make a workable slurry and pouring it on all cleaned and prepared corners and disturbed area and further mixing in the ratio 1:20 and pouring it on the prepared surface by cleaning the surface with etchant chemical from dirt foreign materials etc., and allowing it to be there upto 3 hours and then cleaning the same using water complete as per specification so that the surface is go back and ready to use after 4hours.(p.67/10.8), 30. fabricating, supplying & erecting ms angular truss for all spans as per approved designs and drawing. the entire truss is anchored suitably by using 4 nos. of m.s anchor bolts at each support, with base plate and shoe plate. the work includes cutting, straightening, placing in position of m.s angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, etc., complete as per specification (p41/7.30), 31. ksrb 13.8.9: providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00kgf/sq cm working pressure 110 mm outside diameter raising mains and exposed distribution pipes with special flange, compression type fittings,wall clips,making good the wall,ceiling and floor including cost of all materials,labour charges,hom of equipments and testing complete as per specifications specification no.kbs 13.2.15.2/13.9 (p 94/13.73.5), 32. ksrb 7.3: providing and fixing 1mm thick ms sheet garage door with frame and diagonal braces of size 40x40x6mm angle iron, 3.15mm thick ms gusset plates at the junctions and corners, with handles, stoppers and locking arrangements etc., including applying a primining coat of red lead paint cost of materials, labour, hom of machinery complete as per specifications. double leaf door of size 2.4x2.4m specification no. kbs 7.9/7.12 (p.31/7.3), 33. ksrb 12.5.2: constructing brick masonry cirular type manhole 0.91 m internal dia at bottom 1.67m deep and 0.56m dia at top with table moulded non-modular bricks of 50 class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete m 10 using 40mm and downsize granite metal and making necessary channel in cement concrete m 50 with 20mm and downsize granite metal finished with a floating coat of neat cement, with s.f.r.c. cover and frame (heavy duty, hd-20 grade designation) 560mm internal diameter confirming is:12592, total weight cover and frame to be not less than 182kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite metal, providing and removing centering, shuttering including cost of materials, labour charges, hom of mechineries complete as per specifications. (excavation, footrests and 12mm thick cement plaster on the external surface shall be paid seperately) specification no. kbs 12.4 (p.71/11.38), 34. ksrb 12.8.1: constructing brick masonry inspection chamber 455x610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non- modlular bricks of class designation 50 in cement mortar 1:5, c.i cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg) r.c.c. top slab with cement concrete m- 15 with 20mm and downsize granite metal, foundation concrete m-5 with 40mm and dowsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. specifications. no kbs -do 600x 600mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non- modular bricks of class designation 50 in cement mortar 1:5, c.i. cover with frame (light duty) 600x600mm (p.73/11.50.1), 35. providing and fixing to wall, ceiling and floor unplasticised pvc 6.00kgs/sq cm working pressure with pipe fittings,wall clips etc and making good the wall,ceiling and floor for sanitary pipelines including cost of all materials,labour charges,hom of equipments and testing complete as per specifications for 160 mm dia (p88/12.116.3), 36. providing and fixing for flooring 20mm thick gang saw water cut sadarhalli grey granite in cm 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of curing. -do- minimum width of 1200 mm (p.109/14.61), 37. providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, hom of equipment etc., complete as per specification. (p.108/14.55), 38. iso proof sealer providing waterproof treatment to roof slab using 2 coats of acrylic co polymer elastomeric isoproof sealer & protector. the surface shall be prepared free of tar, dust, fungus, loose particles etc., the surface shall be applied with basecoat of crystallization liquid and then isoproof, wetting agent and liquid (1:1:6) over the prepared surface. in addition the surface shall be provided with polysulphide/acrylic sealant to v groves, making haunch at junction of parapet and roof slab and at damaged portion using patching mortar to drain off rain water. over this one coat of flexible cementatious membrane (fcm), spreading 2 layers of 40 gsm non woven geotextile membrane as reinforcing material (over fcm) with one primer coat of isoproof & applying second coat of isoproof liquid over the primer coat conforming to astm d 412 - 1992. the work shall be carried out as per the directions of the engineer-in-charge.(p271/38.3), 39. providing and fixing ms hand railing for balcony/staircase etc with 50mm dia. m s hollow pipe of 14 gauge, welded to 20mmx20mm m s square rod placed vertically, spaced at 100mm at regular intervals of 600mm. these vertical rods laterally tied to 3 horizontal rods spaced at equal interval. these assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. all the joints and sections hold be cut to length, welded and grinded wherever necessary etc., complete. the work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (p.42/7.35), 40. supplying water storage tanks made of virgin polymer (lldpe) with two layers outer black or blue and inner white layer of approved quality and make, conforming to i.s.i./iso/ssi specifications. (p.265/37.58), 41. providing and fixing to wall, ceiling and floor unplasticised pvc 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, hom of acquirements and testing complete as per specifications. for 110 mm dia (p.88/12.116.1) providing and fixing chorinated poly venyl chloride (cpvc) pipes conforming to is 15778, having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc.,) 25mm nominal od pipes (p.93/13.86.3), 42. providing and fixing chorinated poly venyl chloride (cpvc) pipes conforming to is 15778, having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc.,) 20mm nominal od pipes (p.96/13.86.2), 43. providing and fixing chorinated poly venyl chloride (cpvc) pipes conforming to is 15778, having thermal stability for hot and cold water supply including all cpvc plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. spacing. this includes jointing of pipes and fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (concealed work including cutting chases and good the walls etc.,) 20mm nominal od pipes (p.96/13.86.2), 44. geolphysical investigation of site for sinking borewell for supplying water to the habitation either through the hand pump, mws, p.w.s.s by vertical electrical sounding by adopting venner or schlumbergers method, including reconnaissance survey of geological formation, geophysical investigation of existing ground water in the vicinity, its quality, quantity & acceptebility of the users indicating the location of site, recommended depth of casing pipe reqired to seal the top unconsolidated formation including an extra depth of 1.0 meter. in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site, engaging technical personal and labour required etc., (sr pre 2012-13 page.47/9.4), 45. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 0.00 to 50.00 mtrs (sr pre 2012-13 page.46/9.1), 46. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 50.00 to100.00 mtrs (sr pre 2012-13 page.46/9.1), 47. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 100.00 to 150.00 mtrs (sr pre 2012-13 page.46/9.1), 48. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 150.00 to 200.00 mtrs (sr pre 2012-13 page.46/9.1), 49. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 200.00 to 250.00 mtrs (sr pre 2012-13 page.46/9.1), 50. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 250.00 to 300.00 mtrs (sr pre 2012-13 page.46/9.1), 51. sinking of borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 psig & above 900 cmf & above in all strata including over burden upto 20 m, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) for 300.00 to 350.00 mtrs (sr pre 2012-13 page.46/9.1), 52. supply of isi mark 175mm nominal bore. plain end steel casing pipe-grade of steel fee 410 of wall thickness 5.4mm thick confirming to is 4270:2001 and latest amendements, electric resistance welded steel tube material and confirming to is 1387/1993 and manfactured by basic open hearth electric or basic oxygen process in random length to 5 to 7 mts. both ends threaded confirming to is 554/1985. one end fixed with socket confirming to is 4270:2001 and the other end with screwed pipes. all pipes shall be reasonably free from defects. the tubes shall be reasonbably free from defects. the tubes shall be reasonably straight should be with isi marketing, weighing 25.10kg/mtr. (inclusive of all taxes and duties). prices include collar- medium duty. (sr pre 2012-13 page.iii/84), 53. supply of 175 mm m.s.cap (sr pre 2012-13 page.iii/85), 54. supply of 175 mm m.scollar (sr pre 2012-13 page. iii/86), 55. supply of submersible three phase pump set of 10.0hp/7.5kw,20 stage as per direction of the engineer in charge of the work (brand-atalanta, suguna, c.r.i, kirloskar and other equivalent pumps ) (sr pwd 2016 17 page.xxxxii/21), 56. ksrb 13.6.3.6: providing and fixing in position brass gate valve with c.i wheel of approved quality (screwed end) 50 mm nominal bore including cost of all materials, labour and hom of equipments with all leads complete as per specifications. specification. no. kbs 13.2.6/13.3 (p.92/13.37), 57. ksrb 13.7.1.4: providing and fixing in position 50 mm nominal bore gun metal non- return valve horizontal type of approved make including cost of all materials, labour and hom of equipments with all leads complete as per specifications. specification no.kbs 13.2.10/13.13 (p.93/13.55), 58. ksrb 13.1.1: providing and fixing to wall, ceiling and floor galvanised/mild steel tube 50 mm dia nominal bore with fittings (medium grade weight 5.24 kg/m) b class including cost of all materials, labour charges, hom of equipments and testing complete as per specifications. specification no. kbs 13.2.14/13.8 (p.90/13.6), 59. supplying and drawing 3 core flat pvc sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirmining to table 3 class 5 of is:8130- 1984 and virgin grade pvc insulation and powder coating extruded pvc sheathed suitable for working voltage upto 1100volts as per is -694:1990 and confirming to gtp of group -a for 3 c x 2.5 sq mm(12/2.10), 60. supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor for upto 12.5 hp. (44/6.2.1), 61. supplying and running of gi/copper strips for grounding connections, using necessary fixing materials as required.for gi strip 25mmx3mm (55/7.3.1), 62. supplying and fixing moulded case circuit breaker (mccb) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. protection of overload and short circuit with thermal magnetic/ microprocessor release and earth fault as per is-13947. ( icu = ics) three pole ,100 amps 25 ka (46/6.13.1), 63. ss bar screen : supplying, fabricating,& fixing made out of ss304 grade, with flats 20x 6mm spaced at 14mm c/c with ss304 rake with gi class ‘b’ pipe handle,size: 800mm x 800mm x 1500 mm, placed at 45 degree to the vertical in the bar screen chamber in the groove formed out of ss304 angle of size 40 x 6 mm (top,bottom & sides) including cutting, welding, bending wherever necessary finished with matt/shining etc.,complete. cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works., 64. equalization tank pumps : make: grundfos/ jhoson/ ebara/ kirloskar/ equivalent: supplying, installing, testing & commissioning of raw effluent pumps, cutter type vertical submersible ci body impeller: cast iron/grey iron/a 48 coupled to 5 hp, three phase electrical motor, ip 68, class f insulation,earthing for motors complete.provided with 1 no. ms pump header, 1no. flap type ms nrv including necessary fittings like pvc braded hose, ss clamp, gi hose adaptor,elbow etc.complete. cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works. cap: 15 cu m/hr at 15 mts head, end connections 50mm x 50mm, 65. coarse bubble diffusers : supplying, installing, testing & commissioning of coarse bubble diffusers heavy duty pvc pipe (10 kg/cm2) with central tee, yoke, adaptor and end caps including nylon rope, braided hose of required length with all accessories like clamps, nipples etc., to make it retrievable type.size: 90 dia x 1000mm long each. cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works., 66. fine pore diffusers : supplying, installing, testing & commissioning of fine bubble diffusers heavy duty pvc pipe (10 kg/cm2) with membrane, central tee, yoke, adaptor and end caps including nylon rope, braided hose of required length with all accessories like clamps, nipples etc., to make it retrievable type.size: 90 dia x 1000mm long. cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works., 67. air blowers : (everest/key/ equivalent) : supplying, installing, testing & commissioning of air blowers - 200 cum/hr at 4500 mmwc rotary twin/tri lobe design type.casing: cast iron grade 25.impeller: is 210 grade fg 260 comprising of common base frame with suction/discharge silencers filters, nrv, safety valves, pulley belt guard, pressure gauge etc. provided with ms header, flap type nrv etc., motor: kirloskar/abb/cg make 5 hp/1300 rpm, three phase. foot mounted.ip 55, class f insulation.cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works., 68. sludge pumps grundfos/ jhoson/ ebara/ kirloskar/ equivalent : supplying, installing, testing & commissioning of sludge pumps pump casing: cast iron, impeller: cast iron, mechanical seal cover: cast iron, mechanical seal material: carbon to ceramic, self priming, non clog, ci body/ impeller, centrifugal pump coupled to adequate hp motor, mounted on a common ms base frame epoxy painted with necessary bolts, nuts and with manifold.earthing for motors complete. provided with 1 no. ms pump header, ms tail piece, 2nos. butterfly valve including necessary fittings like upvc flange, valve, pipe, pvc elbow etc. cap – 5 cum/ hr @ 20 mtr head motor with kirloskar/abb/cg make foot mounted, 3 hp/2900 rpm, three phase ip 55, class f insulation.cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works., 69. filter feed pumps grundfos/ jhoson/ ebara/ kirloskar/ equivalent: supplying, installing, testing & commissioning of filter feed pumps self priming, non clog, ci body/ impeller, centrifugal pump coupled to adequate hp motor, mounted on a common ms base frame epoxy painted with necessary bolts, nuts and with manifold. earthing for motors complete. provided with 1 no. ms pump header, ms tail piece, 2 nos. butterfly valve including necessary fittings like upvc flange, valve, pipe, pvc elbow etc. cap – 10 cum/ hr @ 35 mtr head, motor with kirloskar/abb/cg make foot mounted, 5 hp/2900 rpm, three phase. ip 55, class f insulation.cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in -charge of the works., 70. pressure sand filter : supplying, installing, testing & commissioning of pressure sand filter ms fabricated, shell thickness: 6mm dish thickness: 6 mm and painted internally with two coats of epoxy black and externally with one coat of redoxide primer and above that a layer of two coats of enamel paint. filtering media: graded gravel/sand. working pressure: 3.5 kg/cm2 & testing pressure: 5 kg/cm2 minimum depth of media: 1000mm &.minimum depth of sand: 600mm the filter is fitted with top inlet distribution and bottom collection system. pressure gauge is provided at inlet and outlet. complete set of valves, pressure guage, frontal piping at inlet, outlet backwash and drain out point etc., with ms class ‘b’ pipes (make: jindal) dia: 900 mm, hos – 1200 mm, th – 2200mm cost of material and conveyance of all materials, labour for all item of work,hom of equipment charges and all other incidental charges etc., complete as per the specification & directions of the engineer-in - charge of the works.,

INR 550 /-

INR 975000.0 /-

Refer document

Sl No	Item Code	Item Name	Item Description	Unit	Quantity
1	NSEWAGEPLANT001	KSRB 2.2.2: Earthwork excavation by manual means for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specifications. Specification No. KBS 2.1 (b)/2.3.5(P.5/2.4)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	4250
2	NSEWAGEPLANT002	KSRB 3.2: Providing and injecting chemical emulsion for pre constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits, with chloropyriphos emulsifiable concentrates of 20% concentration, including cost of chemical, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specification. (Plinth area of the building at ground floor only shall be measured) Specification No. KBS 3.2.6/3.2.7 (P.9/3.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	500
3	NSEWAGEPLANT003	KSRB 4.1.3: Providing and laying in position plain cement concrete of mix M 1:4:8 with OPC cement @ 180 kgs, with 40mm and down size graded granite metal coarse aggregates @ 0.85cum and fine aggregates @ 0.57cum machine mixed,machine mixed concrete laid in layers not exceeding 15cms thick, well compacted, in foundation including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1.4.2 (P.12/4.3)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	250
4	NSEWAGEPLANT004	KSRB 4.6.4: Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per Specifications. Specification No. KBS 4.6.2 (P.15/4.31)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	1251
5	NSEWAGEPLANT005	KSRB 4.6.2: Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as roofs, landings, balconies and likes, thickness upto 200mm including cost of all materials, labour complete as per Specifications up to 3.50 m from ground level. Specification No. KBS 4.6.2 (P.15/4.18)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	1100
6	NSEWAGEPLANT006	KSRB 4.6.10: Providing and removing centering, shuttering, strutting, propping etc., for chajjas, corbels etc., including edges including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 (P.16/4.37)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	100
7	NSEWAGEPLANT007	KSRB 4.6.8: Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2 (P.16/4.35)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	900
8	NSEWAGEPLANT008	KSRB 4.2.1: Providing and laying in position reinforced cement concrete of design mix M25 with OPC cement @ 340 Kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.70 cum and fine aggregates @ 0.47cum, with superplasticiser @ 3 Ltrs confirming to IS 9103-1999 Reafirmed-2008, machine mixed, concrete laid in layers not excceding 15 cms thick, vibrated for all works in foundation for footings, pedestals, retaining walls, return walls, walls (any thickness) including attached plasters, column pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1.4.6 (P.13/4.10)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	83
9	NSEWAGEPLANT009	KSRB 4.2.11: Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @ 27.20 Kgs, with 12mm and down size graded granite metal coarse aggregates @ 0.05865cum and fine aggregates @ 0.0391cum, with superplastisiser @ 0.225 ltrs., machine mixed, well compacted for plain chajja of 8.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, curing, complete as per specifications. Specification No. KBS 4.1.4.6 (P.14/4.20)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	125
10	NSEWAGEPLANT010	KSRB 4.9.2: Providing TMT steel reinforcement for RCC work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 for TMT Bars Fe 500 (P.17/4.46.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Tonne	215
11	NSEWAGEPLANT011	KSRB 6.2.4: Providing and constructing burnt brick masonry with approved quality of non- modular bricks of standard size of class designation 5.0 Newton per sqmm with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specification. Specification No. KBS 6.2 (P.27/6.7)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	2700
12	NSEWAGEPLANT012	KSRB 5.2.3: Providing and constructing granite/trap/basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in course not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13 (P.23/5.6)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	510
13	NSEWAGEPLANT013	KSRB 7.9: Providing and fixing MS grill work for windows and ventilators using MS flats, or MS square rods, or combination of MS flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specificaitons. Specification No. KBS 7.12 (P.32/7.9)	AS PER TENDER SPECIFICATION: As per Tender Document	Kg	20
14	NSEWAGEPLANT014	KSRB 7.10: Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using double track window frame section o f size 61.85x31.75mm with 1.2mm thcik, bottom section weight 0.695 kg/m, sides and top sections 1.3 mm thick weight 0.659 kg/m: and shutter comprising top and bottom section of size 40mmx18mm, 1.25mm thick 0.417 kg/m: shutter outer side 40mmx18mm, 1.25mm thick weight 0.417 kg/m, shutter interlock section 40mmx26.7mm, 1.1mm thick, weight 0.469 kg/m the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc., and providing and fixing 5.5mm thick plain glass for shutters fitted with rubber beading aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted in the assembled frame stiffened with end clips at corners angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be with necessary steel screws, raul plugs, or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, aluminium sections pretreated for removal of any Specification No. KBS -do- using aluminium section powdered coated to a minimum of 60 - 70 microns with exterior durable pure polyester grade powder of approved quality. (P.33/7.10.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	81
15	NSEWAGEPLANT015	KSRB 15.3.8: Providing 18mm thick cement plaster in signle coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (P.113/15.16)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	650
16	NSEWAGEPLANT016	KSRB 15.15.1: Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. with primer (P.117/15.51.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	2600
17	NSEWAGEPLANT017	Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification.(P.126/15.106)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	60
18	NSEWAGEPLANT018	KSRB 15.7: Providing lime rendering for plastering to wall and ceiling, including cost of materials, labour, curing complete as per specifications. (P. 115/15.33)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	650
19	NSEWAGEPLANT019	KSRB 15.18.2: Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.(P.121/15.74)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	60
20	NSEWAGEPLANT020	Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. (P.125/15.104)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	10
21	NSEWAGEPLANT021	KSRB 4.1.5: Providing and laying in position plain cement concrete of mix M20 with OPC cement @ 300 kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.69cum and fine aggregates @ 0.43cum machine mixed, concrete laid in layers not exceeding 15 cms thick, well compacted, in foundation, plinth, and cills including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1.4.2 (P.12/4.5)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	6
22	NSEWAGEPLANT022	KSRB 2.4: Refilling available earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labour complete as per specifications.(P.6/2.11) Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65X65X6 mm welded together and fixed in CC (1:2:4) with 2 Nos. 16mm dia M.S. hold fast rods each of length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead and lifts and as per the directions of the Engineer-in- charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting. (excluding cost of earth work and concrete) ( P. 262/37.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	501
23	NSEWAGEPLANT023	Supplying and fixing M.S. Rectangular poles made out of 2 equal angles of 65X65X6 mm welded together and fixed in CC (1:2:4) with 2 Nos. 16mm dia M.S. hold fast rods each of length 25 cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all lead and lifts and as per the directions of the Engineer-in- charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting. (excluding cost of earth work and concrete) ( P. 262/37.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	15
24	NSEWAGEPLANT024	Providing and fixing M.S. Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the two verticle poles (M.S. rectangular poles) and spot welding the chain link with M.S. block pipe including cost of all materials wastage in cutting, and scaffolding wherever necessary with all lead and lift as directed by the Engineer-in-charge of work etc., complete including two coats of approved quality paint over one coat of shop paint. ( P.262/37.4)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	29
25	NSEWAGEPLANT025	Providing chain link fencing 50 mm size of 8 quage properly stretched between rectangular poles and fixed with suitable bolts and nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts and as per direction of the Engineer-in-charge of work including two coats of approved quality paint over one coat of shop paint. ( P. 262/37.3)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	2600
26	NSEWAGEPLANT026	Shifting of debris with loading, unloading ,transporation charges for 1.0 KM with all lead and lift as per direction of the Engineer in charge of work (P140)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	202
27	NSEWAGEPLANT027	KSRB 4.4.1: Extra for use of water proofing compound in cement concrete of mix M 1:1:2, at one Kg of compound pr bag of cement. Specification No. KBS (P.14/4.24)	AS PER TENDER SPECIFICATION: As per Tender Document	Cum	115
28	NSEWAGEPLANT028	KSRB 15.4.4:Extra for Providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortat 1:4, 18mm thick cost of materials complete as per specifications.(P.113/15.26)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	215
29	NSEWAGEPLANT029	Providing and applying composite water proofing compound as impregnate only on wet surfaces to arrest leaks in surfaces to arrest leakes in surfaces such as roof cealing, internal and external walls, flooring and other surfaces apart from water tanks, sumps, reservoirs, by mixing the composite water proofing compound with water in ratio of 1:10 to make a workable slurry and pouring it on all cleaned and prepared corners and disturbed area and further mixing in the ratio 1:20 AND pouring it on the prepared surface by cleaning the surface with etchant chemical from dirt foreign materials etc., and allowing it to be there upto 3 hours and then cleaning the same using water complete as per specification so that the surface is go back and ready to use after 4Hours.(P.67/10.8)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	475
30	NSEWAGEPLANT030	Fabricating, supplying & erecting MS Angular Truss for all spans as per approved designs and drawing. The entire truss is anchored suitably by using 4 Nos. of M.S anchor bolts at each support, with base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S angle and welding wherever necessary, and applying one coat of red oxide primer coat to all the members including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, etc., complete as per specification (P41/7.30)	AS PER TENDER SPECIFICATION: As per Tender Document	Kgs	3900
31	NSEWAGEPLANT031	KSRB 13.8.9: Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00kgf/sq cm working pressure 110 mm outside diameter raising mains and exposed distribution pipes with special flange, compression type fittings,wall clips,making good the wall,ceiling and floor including cost of all materials,labour charges,HOM of equipments and testing complete as per specifications Specification No.KBS 13.2.15.2/13.9 (P 94/13.73.5)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	2
32	NSEWAGEPLANT032	KSRB 7.3: Providing and fixing 1mm thick MS sheet garage door with frame and diagonal braces of size 40x40x6mm angle iron, 3.15mm thick MS gusset plates at the junctions and corners, with handles, stoppers and locking arrangements etc., including applying a primining coat of red lead paint cost of materials, labour, HOM of machinery complete as per specifications. Double leaf door of size 2.4x2.4m Specification No. KBS 7.9/7.12 (P.31/7.3)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	4
33	NSEWAGEPLANT033	KSRB 12.5.2: Constructing brick masonry cirular type manhole 0.91 m internal dia at bottom 1.67m deep and 0.56m dia at top with table moulded non-modular bricks of 50 class designation 50 in cement mortar 1:4, inside cement plastered 12mm thick with cement mortar 1:3, finished with a floating coat of neat cement, foundation concrete M 10 using 40mm and downsize granite metal and making necessary channel in cement concrete M 50 with 20mm and downsize granite metal finished with a floating coat of neat cement, with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter confirming IS:12592, total weight cover and frame to be not less than 182kg, fixed in cement concrete 1:2:4, 20mm and downsize broken granite metal, providing and removing centering, shuttering including cost of materials, labour charges, HOM of mechineries complete as per specifications. (Excavation, footrests and 12mm thick cement plaster on the external surface shall be paid seperately) Specification No. KBS 12.4 (P.71/11.38)	AS PER TENDER SPECIFICATION: As per Tender Document	No	100
34	NSEWAGEPLANT034	KSRB 12.8.1: Constructing brick masonry inspection chamber 455X610mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non- modlular bricks of class designation 50 in cement mortar 1:5, C.I cover with frame (light duty) 455X610mm internal dimensions, total weight of cover with frame to be not less than 38kg (weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M- 15 with 20mm and downsize granite metal, foundation concrete M-5 with 40mm and dowsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. specifications. No KBS -do 600x 600mm, and 450mm depth, (clear inside dimension) for single pipeline, using table moulded non- modular bricks of class designation 50 in cement mortar 1:5, C.I. cover with frame (light duty) 600x600mm (P.73/11.50.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	130
35	NSEWAGEPLANT035	Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00kgs/sq cm working pressure with pipe fittings,wall clips etc and making good the wall,ceiling and floor for sanitary pipelines including cost of all materials,labour charges,HOM of equipments and testing complete as per specifications for 160 mm dia (P88/12.116.3)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	3
36	NSEWAGEPLANT036	Providing and fixing for flooring 20mm thick gang saw water cut sadarhalli grey granite in CM 1:4 proportion, cut to required shape, pattern with paper joints, finished with cement mortar using white cement and colour pigments to match the colour of slab making through jointing with sealant, groves in joints including cost of curing. -do- minimum width of 1200 mm (P.109/14.61)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	2
37	NSEWAGEPLANT037	Providing full nosing for 20mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment etc., complete as per specification. (P.108/14.55)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	1
38	NSEWAGEPLANT038	ISO Proof Sealer Providing waterproof treatment to roof slab using 2 coats of acrylic co polymer elastomeric ISOPROOF sealer & protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc., The surface shall be applied with basecoat of crystallization liquid and then ISOPROOF, wetting agent and liquid (1:1:6) over the prepared surface. In addition the surface shall be provided with polysulphide/acrylic sealant to V groves, making haunch at junction of parapet and roof slab and at damaged portion using patching mortar to drain off rain water. Over this one coat of flexible cementatious membrane (FCM), Spreading 2 layers of 40 gsm non woven geotextile membrane as reinforcing material (over FCM) with one primer coat of ISOPROOF & applying second coat of ISOPROOF liquid over the primer coat conforming to ASTM D 412 - 1992. The work shall be carried out as per the directions of the Engineer-in-charge.(P271/38.3)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	1
39	NSEWAGEPLANT039	Providing and fixing MS hand railing for Balcony/staircase etc with 50mm dia. M S hollow pipe of 14 gauge, welded to 20mmx20mm M S square rod placed vertically, spaced at 100mm at regular intervals of 600mm. These vertical rods laterally tied to 3 horizontal rods spaced at equal interval. These assembly is fixed to concrete by using expansion bolts and welding the same to reinforcement bars and making good the surface. All the joints and sections hold be cut to length, welded and grinded wherever necessary etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for welding, cutting and grinding equipment, and electricity charges, etc., complete as per specification and drawing. (P.42/7.35)	AS PER TENDER SPECIFICATION: As per Tender Document	Sqm	4
40	NSEWAGEPLANT040	Supplying water storage tanks made of virgin polymer (LLDPE) with two layers outer Black or Blue and inner White layer of approved quality and make, conforming to I.S.I./ISO/SSI specifications. (P.265/37.58)	AS PER TENDER SPECIFICATION: As per Tender Document	Ltr	2
41	NSEWAGEPLANT041	Providing and fixing to wall, ceiling and floor unplasticised PVC 6.00 kgs/sqcm working pressure with pipe fittings, wall clips etc., and making good the wall, ceiling and floor for sanitary pipelines including cost of all materials, labour charges, HOM of acquirements and testing complete as per specifications. for 110 mm dia (P.88/12.116.1) Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. Spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.,) 25mm nominal OD pipes (P.93/13.86.3)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	2
42	NSEWAGEPLANT042	Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. Spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.,) 20mm nominal OD pipes (P.96/13.86.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	2
43	NSEWAGEPLANT043	Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr. Spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc.,) 20mm nominal OD pipes (P.96/13.86.2)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	1
44	NSEWAGEPLANT044	Geolphysical investigation of site for sinking borewell for supplying water to the habitation either through the Hand Pump, MWS, P.W.S.S by vertical electrical sounding by adopting venner or Schlumberger\s method, including reconnaissance survey of geological formation, Geophysical investigation of existing Ground water in the vicinity, its quality, quantity & acceptebility of the users indicating the location of site, recommended depth of casing pipe reqired to seal the top unconsolidated formation including an extra depth of 1.0 meter. in consolidated formation for proper seating of casing pipe, depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site, engaging technical personal and labour required etc., (SR PRE 2012-13 Page.47/9.4)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	1
45	NSEWAGEPLANT045	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 0.00 to 50.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	1
46	NSEWAGEPLANT046	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 50.00 to100.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	2
47	NSEWAGEPLANT047	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 100.00 to 150.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	1
48	NSEWAGEPLANT048	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 150.00 to 200.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	1
49	NSEWAGEPLANT049	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 200.00 to 250.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	12
50	NSEWAGEPLANT050	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 250.00 to 300.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	2
51	NSEWAGEPLANT051	Sinking of Borewell of 165 mm dia clear using superfast hydraulic rig of capacity 250 PSIG & above 900 CMF & above in all strata including over burden upto 20 M, fixing of casing pipes, collars and cap with necessary cutting, threading and welding including transportation of rig and supporting vehicle, crew charges and cost of consumables, etc., complete including yield testing at the final depth with a minimum working of compressor for one hour (excluding cost of casing pipes, collars, cap etc) FOR 300.00 to 350.00 mtrs (SR PRE 2012-13 Page.46/9.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	50
52	NSEWAGEPLANT052	Supply of ISI Mark 175mm nominal Bore. Plain end Steel casing Pipe-grade of Steel Fee 410 of wall thickness 5.4mm thick confirming to IS 4270:2001 and latest amendements, electric resistance welded steel tube material and confirming to IS 1387/1993 and manfactured by basic open hearth electric or basic oxygen process in random length to 5 to 7 mts. Both ends threaded confirming to IS 554/1985. One end fixed with socket confirming to IS 4270:2001 and the other end with screwed pipes. All pipes shall be reasonably free from defects. The tubes shall be reasonbably free from defects. The tubes shall be reasonably straight should be with ISI Marketing, weighing 25.10kg/mtr. (Inclusive of all taxes and duties). Prices include Collar- medium duty. (SR PRE 2012-13 Page.iii/84)	AS PER TENDER SPECIFICATION: As per Tender Document	Rmtr	2
53	NSEWAGEPLANT053	Supply of 175 mm M.S.Cap (SR PRE 2012-13 Page.iii/85)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	290
54	NSEWAGEPLANT054	Supply of 175 mm M.Scollar (SR PRE 2012-13 Page. Iii/86)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	290
55	NSEWAGEPLANT055	Supply of submersible three phase pump set of 10.0HP/7.5KW,20 stage as per direction of the Engineer in charge of the work (Brand-ATALANTA, SUGUNA, C.R.I, KIRLOSKAR and other Equivalent Pumps ) (SR PWD 2016 17 Page.XXXXII/21)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	175
56	NSEWAGEPLANT056	KSRB 13.6.3.6: Providing and fixing in position brass gate valve with C.I wheel of approved quality (screwed end) 50 mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification. No. KBS 13.2.6/13.3 (P.92/13.37)	AS PER TENDER SPECIFICATION: As per Tender Document	No	150
57	NSEWAGEPLANT057	KSRB 13.7.1.4: Providing and fixing in position 50 mm nominal bore gun metal non- return valve horizontal type of approved make including cost of all Materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.10/13.13 (P.93/13.55)	AS PER TENDER SPECIFICATION: As per Tender Document	No	30
58	NSEWAGEPLANT058	KSRB 13.1.1: Providing and fixing to wall, ceiling and floor galvanised/mild steel tube 50 mm dia nominal bore with fittings (medium grade weight 5.24 kg/m) B class including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications. Specification No. KBS 13.2.14/13.8 (P.90/13.6)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	50
59	NSEWAGEPLANT059	Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirmining to table 3 class 5 of IS:8130- 1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100Volts as per IS -694:1990 and confirming to GTP of GROUP -A for 3 C X 2.5 Sq mm(12/2.10)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	4
60	NSEWAGEPLANT060	Supplying fully automatic star-delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 volts 3 phase and wired after fixing to the existing wooden board for motor for upto 12.5 HP. (44/6.2.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	4
61	NSEWAGEPLANT061	Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.for GI strip 25mmx3mm (55/7.3.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Mtr	4
62	NSEWAGEPLANT062	Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/ Microprocessor release and Earth Fault as per IS-13947. ( Icu = Ics) Three pole ,100 Amps 25 kA (46/6.13.1)	AS PER TENDER SPECIFICATION: As per Tender Document	Each	6
63	NSEWAGEPLANT063	SS Bar Screen : Supplying, fabricating,& fixing made out of SS304 grade, with flats 20x 6mm spaced at 14mm c/c with SS304 rake with GI class ‘B’ pipe handle,Size: 800mm x 800mm x 1500 mm, placed at 45 degree to the vertical in the bar screen chamber in the groove formed out of SS304 angle of size 40 x 6 mm (top,bottom & sides) including cutting, welding, bending wherever necessary finished with matt/shining etc.,complete. cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	100
64	NSEWAGEPLANT064	Equalization Tank Pumps : Make: Grundfos/ Jhoson/ Ebara/ Kirloskar/ Equivalent: Supplying, Installing, Testing & Commissioning of Raw Effluent pumps, Cutter Type Vertical Submersible CI Body Impeller: Cast iron/Grey iron/A 48 coupled to 5 Hp, Three phase electrical motor, IP 68, Class F insulation,Earthing for motors complete.Provided with 1 No. MS pump header, 1No. Flap type MS NRV including necessary fittings like PVC braded hose, SS clamp, GI hose adaptor,elbow etc.complete. cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works. Cap: 15 Cu M/Hr at 15 Mts Head, end connections 50mm X 50mm	AS PER TENDER SPECIFICATION: As per Tender Document	No	100
65	NSEWAGEPLANT065	Coarse bubble diffusers : Supplying, Installing, Testing & Commissioning of Coarse bubble diffusers Heavy duty PVC pipe (10 kg/cm2) with central Tee, Yoke, adaptor and end caps including nylon rope, braided hose of required length with all accessories like clamps, nipples etc., to make it retrievable type.Size: 90 dia x 1000mm long each. Cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	4
66	NSEWAGEPLANT066	Fine pore diffusers : Supplying, Installing, Testing & Commissioning of Fine Bubble diffusers Heavy duty PVC pipe (10 kg/cm2) with Membrane, central Tee, Yoke, adaptor and end caps including nylon rope, braided hose of required length with all accessories like clamps, nipples etc., to make it retrievable type.Size: 90 dia x 1000mm long. Cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	4
67	NSEWAGEPLANT067	Air Blowers : (Everest/KEY/ Equivalent) : Supplying, Installing, Testing & Commissioning of Air Blowers - 200 Cum/hr at 4500 MMWC Rotary twin/tri lobe design type.Casing: Cast iron grade 25.Impeller: IS 210 grade FG 260 comprising of common base frame with suction/discharge silencers filters, NRV, Safety valves, pulley belt guard, pressure gauge etc. Provided with MS header, flap type NRV etc., Motor: Kirloskar/ABB/CG make 5 HP/1300 rpm, three phase. Foot mounted.IP 55, Class F Insulation.cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	20
68	NSEWAGEPLANT068	Sludge pumps Grundfos/ Jhoson/ Ebara/ Kirloskar/ Equivalent : Supplying, Installing, Testing & Commissioning of Sludge pumps Pump casing: Cast Iron, Impeller: Cast Iron, Mechanical seal cover: Cast Iron, Mechanical seal material: Carbon to ceramic, Self Priming, non clog, CI Body/ impeller, centrifugal pump coupled to adequate HP motor, mounted on a common MS base frame epoxy painted with necessary bolts, nuts and with manifold.Earthing for motors complete. Provided with 1 No. MS pump header, MS tail piece, 2Nos. butterfly valve including necessary fittings like UPVC flange, valve, pipe, PVC elbow etc. Cap – 5 CuM/ Hr @ 20 Mtr Head Motor with Kirloskar/ABB/CG make foot mounted, 3 HP/2900 rpm, three phase IP 55, Class F Insulation.cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	5
69	NSEWAGEPLANT069	Filter Feed Pumps Grundfos/ Jhoson/ Ebara/ Kirloskar/ Equivalent: Supplying, Installing, Testing & Commissioning of Filter Feed Pumps Self Priming, non clog, CI Body/ impeller, centrifugal pump coupled to adequate HP motor, mounted on a common MS base frame epoxy painted with necessary bolts, nuts and with manifold. Earthing for motors complete. Provided with 1 No. MS pump header, MS tail piece, 2 Nos. butterfly valve including necessary fittings like UPVC flange, valve, pipe, PVC elbow etc. Cap – 10 CuM/ Hr @ 35 Mtr Head, Motor with Kirloskar/ABB/CG make foot mounted, 5 HP/2900 rpm, Three phase. IP 55, Class F Insulation.cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in -charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	5
70	NSEWAGEPLANT070	Pressure Sand Filter : Supplying, Installing, Testing & Commissioning of Pressure Sand Filter MS fabricated, shell thickness: 6mm dish thickness: 6 mm and painted internally with two coats of Epoxy black and externally with one coat of redoxide primer and above that a layer of two coats of enamel paint. Filtering media: Graded Gravel/Sand. Working pressure: 3.5 kg/cm2 & Testing pressure: 5 kg/cm2 Minimum depth of media: 1000mm &.Minimum depth of sand: 600mm The filter is fitted with top inlet distribution and bottom collection system. Pressure gauge is provided at inlet and outlet. Complete set of valves, pressure guage, frontal piping at inlet, outlet backwash and drain out point etc., with MS class ‘B’ pipes (make: Jindal) Dia: 900 mm, HOS – 1200 mm, TH – 2200mm cost of material and conveyance of all materials, labour for all item of work,HOM of equipment charges and all other incidental charges etc., complete as per the specification & directions of the Engineer-in - charge of the works.	AS PER TENDER SPECIFICATION: As per Tender Document	No	5