Tender For Outsourcing Services For Manning And Operation Of Substations No. 1, 4 & 9 Under Age E/M (Maint) At Ina Ezhimala
Tender Value
38.18 Lakhs
Estimated cost
Bid Submission
07 Dec 2019
0 days left
EMD
76360
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
EZHIMALA → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Outsourcing Services For Manning And Operation Of Substations No. 1, 4 & 9 Under Age E / M ( Maint ) At Ina Ezhimala
BOQ
| Name of Work: OUTSOURCING SERVICES FOR MANNING AND OPERATION OF SUBSTATIONS NO. 1, 4 & 9 UNDER AGE E/M (MAINT) AT INA EZHIMALA | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Note applicable for all Items of BOQ:- (FOR SPECIAL ATTENTION OF BIDDERS)\n If the lowest quoted amount is less than the estimated cost of the work mentioned in NIT, the lowest bidder will have to submit FDR/BGB in favour of Accepting Officer within 7 (Seven) days of opening of Financial Bid for the difference in estimated cost and quoted amount. In case the said FDR/BGB is not submitted within stipulated period as mentioned above, the contractor shall be banned for 6 months and his bid will be rejected. FDR/GBG will be released only after completion of entire work and production of proof for the payment of wages to all the workers employed under the contract is paid not less than the minimum wages notified by the Central Govt./State Govt. whichever is more | 1 | ||
| 2 | 2 | Outsourcing services for Operation of 11 KV Substation NO 1 comprising of HT/LT switch gears, HT/LT Mechinaries and all connected accessories mentioned below by employing two skilled ITI qualified electrician per shifts ( 0600hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs ) and to carry out the following routine works as directed by Engr- In- Charge.\n The Equipements details:- \n(a) 11 KV 400 amps Vacuum circit breaker with relays and controls - 07 nos. \n(b) 11KV/433 V stepdon transformer of capacity 100 KVA - 01 No. \n(c) LT control pannel - 01 No. \n(d) 11 KV Metering panel - 01 No \n(e) Battery bank with Battery charger - 01 no . \n(f) HT Bus coupler with Ringmain supply system - 01 Set \n(g) DG Det 01 Nos | 2 | 1002 | Per Shift of \nTwo Person |
| 3 | 3 | Outsourcing services for Operation of 11 KV Substation NO 4 comprising of HT/LT switch gears, HT/LT Mechinaries and all connected accessories mentioned below by employing one skilled ITI qualified electrician per shifts ( 0600hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs) and to carry out the following routine works as directed by Engr- In- Charge. equipement details are :- (a) 11 KV 400 amps Vacuum circit breaker with relays and control- 04 Nos.\n(b) 11 KV OSFU 400 Amps- 03 Nos.\n(c) 11KV/433 V stepdon transformer of capacity 315 KVA- 02 No. \n(d) LT control pannel - 01 No.\n(e) PF Improvement Capacitor panel - 01 No.\n(f) Battery bank with Battery charger- 01 No. | 3 | 1002 | Per Shift \nof \nEach Person |
| 4 | 4 | Outsourcing services for Operation of 11 KV Substation NO 9 comprising of HT/LT switch gears, HT/LT Mechinaries and all connected accessories mentioned below by employing two skilled ITI qualified electrician per shifts ( 0600hrs to 1400 hrs, 1400 hrs to 2200 hrs and 2200 hrs to 0600 hrs ) and to carry out the following routine works as directed by Engr- In- Charge. The equipement details are :- (a) 11 KV 400 amps Vacuum circit breaker with relays and control- 11 Nos.\n (b) 11KV/433 V stepdon transformer of capacity 500 KVA- 01 No.\n(c) 11KV/433 V stepdon transformer of capacity 1000 KVA- 02 Nos.\n(d) LT control pannel - 03 Nos.\n(e) PF Improvement Capacitor panel - 01 No.\n(f) Battery bank with Battery charger- 01 No.\n(g) HT Bus coupler with Ring Main - 01 No.\n(h) DG Set 320 KVA- 01 No.\n(j) DG set panel - 01 No . | 4 | 1002 | Per Shift \nof \nTwo Person |
| 5 | 4.01 | NOTES FOR SL ITEM NO 02, 03 & 04 \n(i) Spares if any required for replacement shall be supplied by MES\n(ii) The tradesmen shall be well qualified in respective trade and shall wear approved uniform as directed by Engineer- in- charge while on duty .He shall be well conversant with preventive measures (First Aid) in case of electrical accidents and fire fighting systems and maintain log books for Sub Stations\n(iii) The Unit rate quoted shall include stationery required to maintain attendance register, duty roster, payment register, display board, complaint register, Log sheet and other register as directed by Enginer- in-Charge ,The unit rate also include distilled water,grease etc for battery maint ,cleaning materials like cotton waste etc.\n (iv) The contractor will prepare duty roster well in advance and got it approved by Engineer - In- Charge and one copy of the roster shall be displayed in the notice board .\n (v) Supplying of stationary, uniform, tool and plant required for day to day maintenance for sub Station maintenance all as directed by Engr in charge.\n(vi) Contractor is fully responsible for cleanliness of the area of substations. \n\n | 4.01 | ||
| 6 | 5 | Taking down the defective security light fittings /street light fittings of any type from 11/10/8.5 Mtr Swan neck type pole and refixing in same position after carrying out necessary repair work/replacement of burn out parts and cleaning the fittings completely. spares such as Driver/clamps/wire etc shall be measured and paid under their respective item certain items other than 'Supply only' items mentiond below shall be supply only. | 5 | 20 | Each Job |
| 7 | 6 | Supply only LED driver 45 Watt complete as specified and directed.\nMake:- Crompton (cat part No BGD700655Y, Driver code- 112520) or Equivalent in Bajaj/Havells/Wipro as approved by GE. | 6 | 10 | Each |
| 8 | 7 | Supply only LED driver 60 Watt complete as specified and directed.\nMake:- Crompton (cat part No BGD381505Y, Driver code- 112552) or Equivalent in Bajaj/Havells/Wipro as approved by GE. | 7 | 10 | Each |
| 9 | 8 | Supply and fix in replacement street light LED Luminaire die cast aluminium coating ,heat resistant glass of capacity 60 watts complete all as specified and directed by Engr in charge.\nMake:- Crompton (cat part no BRTFG 45W LED) complete all as specified and directed by Engr in charge or Equivalent in Havells/Surya/Luker/Jaquar as approved by GE. | 8 | 10 | Each |
| 10 | 9 | Supply and fix in replacement street light LED Luminaire die cast aluminium coating ,heat resistant glass of capacity 45 watts complete all as specified and directed by Engr in charge.\nMake:- Crompton (cat part no BRTFG 60W LED) complete all as specified and directed by Engr in charge or Equivalent in Havells/Surya/Luker/Jaquar as approved by GE. | 9 | 10 | Each |
| 11 | 10 | Supply and fix in repalcement of Contactor 4 pole,415 volts, 60/63 Amps.\nMake:- L&T/Havells/GE/Indoasian/C&S. | 10 | 3 | Each |
| 12 | 11 | Supply and fix in replacement of Digital time switch day programme DIN type240 volt AC complete as specified and directed. \nMake L&T/Indoasian/Havells. | 11 | 3 | Each |
| 13 | 12 | Supply and fix in replacement of Copper cable flexible 2.5 Sqmm 3 core 230 Volts complete as specified and as directed by Engr-in-charge.\nMake : Polycab/Havells/Finolex. | 12 | 100 | RM |
| 14 | 13 | Supply and fix in replacement weather proof street light junction boxes made out of Thermo plastic consisting of 4 nos. of connectors of capacity 40 Amps 415V and 1 no. of SP MCB rating 6 Amps 240V with proper closing arrangement, elmax connector for neutral link including pole mounting clamp with nut bolts. The size of the box shall be of size 260mmx210mm116 mm.The box should have two cable entry complete as specified and directed.\nMake:- Sintex/Hensel/Rettle/Scnieder | 13 | 15 | Each |
| 15 | 14 | Supply and fix in replacement of 60 watt IP 66 rated Decorative street light fitting Empire type complete all as specified and directed by Engr in charge. Make Crompton (Cat Part No-LPTE-60-CDL) or equivalent in Bajaj/Havells as approved by GE. | 14 | 6 | Each |
AI Tender Summary
Tender Timeline
Nov 16, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 07, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 09, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender