Construction Two Room School Building At Phonda Titha Tal Kankavali
Tender Value
13.67 Lakhs
Estimated cost
Bid Submission
02 Dec 2019
0 days left
EMD
13700
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sindhudurg → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Two Room School Building At Phonda Titha Tal Kankavali
BOQ
| Name of Work: Constructing Two Room School Building at Phonda Titha Tal. Kankavli | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in earth, soils of all types sand gravel & soft murum including removing the excavated materials upto a distance of 50m beyond the building area and lift as specified stacking & spreading as directed including dewatering unless provided elsewhere preparing the bed for the foundation and necessary backfilling ramming watering comp. including shoring & strutting. | 1 | 25.69 | Cmt |
| 2 | 2 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means | 2 | 1.91 | Cmt |
| 3 | 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand | 3 | 14.62 | Cmt |
| 4 | 4 | Providing laterite stone masonry in cemen morter 1 : 6 in foundation & plinth including racking joints when plastering is to be done / striking joints when no plastering is to be done watering and scaffolding. P/I - Circular No.3 / 6. (R.A) | 4 | 34.74 | Cmt |
| 5 | 5 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. | 5 | 53.56 | Cmt |
| 6 | 6 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. | 6 | 18.75 | Cmt |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand. P/I - (R A) | 7 | 6.29 | Cmt |
| 8 | 8 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. | 8 | 0.566 | M.T |
| 9 | 9 | Providing laterite stone masonry in cemen morter 1 : 6 in superstructure including racking out joints when plastering is to be done/ striking joints when no plastering is to be done watering and scaffolding. P/I - Circular No.3 / 7. (R.A) | 9 | 31.86 | Cmt |
| 10 | 10 | Providing and fixing frame with / without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. | 10 | 0.147 | Cmt |
| 11 | 11 | Providing and fixing non teak wood 25mm thick second class plain planked door without ventilator adopting section and sizes as given in in standard specification Vol II (1981) with double leaf planked shutter as per detailed drawings including iron oxidised fixtures and fastening and finishing P/I 39.12 2599.40/- BDT 21 P 499 | 11 | 4.2 | Smt |
| 12 | 12 | Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete. | 12 | 8.26 | Smt |
| 13 | 13 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box. | 13 | 9.72 | Smt |
| 14 | 14 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete..P/I 329/40.01 BDU 1/P 583 1171/- + 10% Hilly = | 14 | 10.34 | Smt |
| 15 | 15 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. | 15 | 2.903 | M.T |
| 16 | 16 | Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) | 16 | 142.8 | Smt |
| 17 | 17 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated withAluminium-Zinc alloy (55% aluminiumm 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyster paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with sublet square fluting in the five pan at nominal 180-250 mmcenter-to-center. The end rib shall be designed for anti-capacity groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 301 mm to 600 mm girth (Surface Width) | 17 | 8.4 | Smt |
| 18 | 18 | Providing and fixing Mangalore tiled roofing with class ' AA' tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x 25 mm horizontal teak wood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles). | 18 | 142.8 | Smt |
| 19 | 19 | Providing and fixing Mangalore tile ridge and hip tiles of class 'AA' including scaffolding if necessary, pointing with coloured cement mortar and curing etc. complete. | 19 | 14 | Rmt |
| 20 | 20 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. | 20 | 91 | Smt |
| 21 | 21 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. | 21 | 4.4 | Smt |
| 22 | 22 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | 22 | 358.67 | Smt |
| 23 | 23 | Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. | 23 | 110.71 | Smt |
| 24 | 24 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, \n | 24 | 198.77 | Smt |
| 25 | 25 | Providing,painting,lettering Name board on plastered surface of wall | 25 | 1 | No |
| 26 | 26 | Royalty Charges | 26 | 6.63 | No |
| 27 | 27 | Testing Charges i) Sand- Fineness modulus Silt & clay content | 27 | 1 | No |
| 28 | 28 | ii) laterite stone - Compressive strength water absorption , Crushing, Specific gravity | 28 | 1 | No |
| 29 | 29 | v) Cement concrete M-20 - Compressive strength | 29 | 2 | No |
| 30 | 30 | vi) steel - Tensile strength, Elongation, Yield stress, Weight per meter, Bend rebend test, proof stress | 30 | 1 | No |
| 31 | 31 | vii) Alliminium Section - Thickness, mass per Rmt | 31 | 1 | No |
| 32 | 32 | viii) tiles - Water Absorption, Modulus of Rupture | 32 | 1 | No |
| 33 | 33 | x) wood work | 33 | 1 | No |
| 34 | 34 | xi ) Cement Test | 34 | 1 | No |
AI Tender Summary
Tender Timeline
Nov 16, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 03, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender