Construction Of Sc St Girls Hostel In Engineering Hostel Campus , Jnvu Jodhpur . Jnv1920wsob00056
Tender Value
2 Crore
Estimated cost
Bid Submission
26 Nov 2019
0 days left
EMD
4 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Registrar, JNVU, Jodhpur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Sc St Girls Hostel In Engineering Hostel Campus , Jnvu Jodhpur . Jnv1920wsob00056
BOQ
| Name of Work: Construction of SC-ST Girls Hostel in Engineering Hostel Campus, JNVU Jodhpur. | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils | B2/1.8 | 1265 | Cum |
| 2 | 2 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. | B8/1.30 | 550 | Cum |
| 3 | 3 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15cm deep and disposal of rubbish lead upto 50mtr. and lift upto 1.5Mtr.All kind of soil. | B9/1.34 | 35 | 100 Sqm |
| 4 | 4 | 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size (Crusher Broken) | B16/3.2.7 | 551 | Cum |
| 5 | 5 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level IS 456-2000:1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) | B21/4.1.2 | 50 | Cum |
| 6 | 6 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. | B23/4.11 | 210 | Sqm |
| 7 | 7 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-Sand). | B40/6.1.7 | 730 | Cum |
| 8 | 8 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-Sand). | B40/6.2.7 | 525 | Cum |
| 9 | 9 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stones over item No. 6.1 & 6.2 for :Course rubble facing Second Sort. | B40/6.4.2 | 2600 | Sqm |
| 10 | 10 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stones over item No. 6.1 & 6.2 for :Course rubble facing First Sort. | B40/6.4.1 | 1270 | Sqm |
| 11 | 11 | Extra for facing as per design and detailed specifications IS 1597 (Part-II) 1992 including additional cost of stones over item No. 6.1 & 6.2 for :Add extra for rock facing using Jodhpur white sand stone with porper projection and chisal dressing of edges of stone 2 line dressing for building corners,jambs including uniform joints. | B41/6.4.8 | 1270 | Sqm |
| 12 | 12 | Random Rubble stone masonary for superstructure above plinth level one storey height above 30 Cm. thick walls IS 1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-Sand).Extra over item No. 6.1 & 6.2 for :Pillar masonry including bed plates as per specifications. Bed plate to be paid separately. | B40/6.2.7+6.3.3 | 15 | Cum |
| 13 | 13 | Brick masonary in foundation and plinth with bricks of class designation 75 mm. IS 2212-1991 in : Cement Mortar 1:4 (1-Cement:4-coarse sand).Add extra over item No. 5.1 for brick work in superstructure up to third storey IS 1077-1986. | B33/5.1.5+5.2 | 20 | Cum |
| 14 | 14 | Supplying and fixing ashlar coping ordinary 7 to 10 cm. thick 2-line dressed (normal length of single piece not less than 0.90m)(a) Soorsagar or eqvt. White Ashlar | B47/6.32(a) | 150 | Sqm |
| 15 | 15 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement IS 456-2000:with 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). | B21/4.3.1 | 265 | Cum |
| 16 | 16 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for:Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. | B23/4.12.2(a) | 1900 | Sqm |
| 17 | 17 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.Tremo Mechanically treated bars | B25/4.13.4 | 37100 | Kg |
| 18 | 18 | Providing and fixing fully paneled double leaf shutter for doors as per approved design and drawing with approved ordinary C.P./oxidized steel fittings as per Annexure – A’ and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mmx12mm on both faces complete IS 1003 (Part-I) 2003 :35 mm thick Nigeria teak wood grade - I 12 mm thick shuttering ply (both faces panels) | B66/8.6.3(A)8 | 170 | Sqm |
| 19 | 19 | Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete above plinth level up to 4.5 mtr. height in R.S. joist flats, tees, angles and channels. | B96/9.1 | 600 | Kg |
| 20 | 20 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. | B97/9.13 | 1550 | Kg |
| 21 | 21 | Providing and fixing in position collapsible steel shutters with vertical M.S. Channels 20x10x2mm and brackets with flat iron diagonals 20x5mm, size with top and bottom rail of T-iron 40x40x6mm, with 40 mm dia steel pulleys / ball bearing complete with bolts, nuts locking arrangements inside and outside stoppers, handles etc. as per specification including applying a priming coat of approved steel primer. (To be measured and paid as per outer dimension). IS 10521-1983.With 75 mm opening when closed. | B99/9.20.1 | 6 | Sqm |
| 22 | 22 | Providing & fixing steel glazed doors, windows and ventilators shutters of standred rolled steel section joint mitred and welded with steel 13x3mm lugs 10 Cm. long embedded in cement concrete blocks 15x10x10 Cm. of 1:3:6 (1-Cement:3-coarse sand:6-graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of plain glass panes 4mm thick with copper glazing clips and special metal-sash putty of approved make, or metal beading with screws complete including priming coat of approved steel primer, excluding the cost of metal beading and other fittings except necessary hinges of pivots steel handles and peg stay etc. as required. IS 1038-1983.Partially fixed and partially openable fixed area not exceed 33% | B103/9.28.8 | 110 | Sqm |
| 23 | 23 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance.\n\n | B103/9.31 | 110 | Sqm |
| 24 | 24 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | B104/9.32 | 1900 | Kg |
| 25 | 25 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. | B111/9.64 | 24 | Mtr |
| 26 | 26 | Stone slab roofing on ground for with fine grained stone slab from approved quarry with 150 mm top lime terracing with Hemp, Methi, Lime, Sandla with Gur & Gugal (as per JODHPUR PRACTICE) including ralthal, filling of joints of parapet and slab on both sides in cement sand mortar 1:4 lime batta (gola) 75mmx75mm Sandla and ceiling plaster in CM 1:4 with wire and nails etc. complete as per specification for span. Above 2.50 mtr upto 3.30 metre.Providing and laying lime terrace on roofs of ground floor including lime batta (gola) 75mm and sandal complete (JODHPUR PRACTICE) for thickness:150 mm thick average.Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish :25 mm thick. | B112/10.1.3-10.5.1-144/12.8.1 | 32 | Sqm |
| 27 | 27 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. | B114/10.8 | 390 | Mtr |
| 28 | 28 | Providing and laying Chequerred plain cement concrete embossed specially manufactured non-slipping tiles of approved make 20 mm thick laid on 20 mm thick bed of cement mortar 1:6 jointed with neat cement slurry complete.Add extra for chequerred coloured plain cement concrete or specially manufactured non-slipping tiles of approved make 20 mm thick. | B134/11.33+11.34 | 90 | Sqm |
| 29 | 29 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000 Sq. Cm : 25 mm thick slab. | B135/11.35.3(A) | 100 | Sqm |
| 30 | 30 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :For area of each slab up to 2001 to 5000 Sq. Cm : 30 mm thick slab. | B135/11.35.3(B) | 1150 | Sqm |
| 31 | 31 | Add extra for mirror polishing on terrazzo / mosaic flooring : New surface | B137/11.42.1 | 1250 | Sqm |
| 32 | 32 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000:1:3:6 (1Cement :3 Course Sand :6 Graded stone aggregate 20 mm nominal size | B16/3.2.4 | 70 | Cum |
| 33 | 33 | Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000:1:2:4 (1Cement :2 Course Sand 4 Graded stone aggregate 20 mm nominal size)Add extra for laying concrete in superstructure up to floor three level in item 3.2. ( IS 456-2000) : | B16/3.2.3+17/3.4(I) | 180 | Cum |
| 34 | 34 | Providing and fixing 20 mm dia Conduit pipe curtain rods with steel brackets etc. complete. | B85/8.28 | 200 | Mtr |
| 35 | 35 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish :12 mm thick. | B144/12.8.3 | 1500 | Sqm |
| 36 | 36 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 25 mm thick. | B 144/12.9.1 | 1850 | Sqm |
| 37 | 37 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc. complete fine finish :25 mm thick. | B144/12.8.1 | 500 | Sqm |
| 38 | 38 | Pointing on stone slab ceiling with cement mortar 1:3 (1-Cement:3-Sand) :Flush pointing. | B142/12.39.1 | 37 | Sqm |
| 39 | 39 | Deep groove pointing on stone masonry in white cement sand mortar (1:3) with colour pigment of approved shade for all type of masonry incl. racking of joint as per specification complete in all respect. | B150/12.43(A) | 1270 | Sqm |
| 40 | 40 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding:New work (two or more coats) over and including scrapping and priming coat with cement primer. | B152/12.51.1 | 3150 | Sqm |
| 41 | 41 | Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete | B160/12.91 | 3150 | Sqm |
| 42 | 42 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. | B156/12.68.1 | 750 | Sqm |
| 43 | 43 | White cement tuck or raised pointing 1:3 on ashlar work including racking of of joints scaffolding curing etc. complete with colour pigment of approved shade in mortar etc. as per P.WD. Specification. | B160/12.90 | 160 | Sqm |
| 44 | 44 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).Category-I | B62/7.3(A) | 320 | Sqm |
| 45 | 45 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). | B62/7.4 | 105 | Sqm |
| 46 | 46 | Supplying and fixing machine cut and polished stone shelves, tands and sills in CM 1:3 with machine cut edges:Kota stone 25 to 30 mm thick. | B43/6.16.4 | 200 | Sqm |
| 47 | 47 | Providing and fixing stone slabs table rubbed, 18-20mm thick in Walls, Steps, Pillars, Counters, Jambs, Shelves, Sills etc. laid on 12 mm (Av.) thick base of CM 1:3 (1-cement:3-coarse sand) jointing with white cement mortar 1:2 (1-White cement:2-marble dust) with pigment to match the shade of the marble slab complete including grinding rubbing and polishing.GREEN MARBLE Kesriaji (Rikhabdeo).Above 3601 Cm2 Add extra for mirror polishing on terrazzo / mosaic flooring :New surface | B59/7.1.14(D)+137/11.42.1 | 16 | Sqm |
| 48 | 48 | Extra for providing edge moulding to 18 mm thick marble stone counters, vantities etc. over item No. 7.1 & 7.2 including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Marble work | B64/7.10.1 | 30 | Mtr |
| 49 | 49 | P & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :Size 580x440 mm. | S-1/1.2.1 | 4 | Nos |
| 50 | 50 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor.P & F water closet Seat Covers with brass hinges complete IS 2548-1996 :Solid PVC (ISI marked) grade-I White for EWC.P&F Jet spray for water closet with C.P. copper tube flange of approved make | S-1/1.4+2/1.8.2+14/1.62 | 8 | Nos |
| 51 | 51 | P&F WVC (IS: 2556 Mark) squatting urinal of standard make complete incl. cutting & making good the floor Size 600x350mm | S-4/1.19 | 4 | Nos |
| 52 | 52 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :Size 550 mm x 400 mm | S-7/1.39.5 | 16 | Nos |
| 53 | 53 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : PVC with PVC bend as per IS : 7231 | S-5/1.22.2 | 12 | Nos |
| 54 | 54 | P & F kitchen & Lab Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up to floor level complete including cutting and making good the wall & floor IS 771 (Part-II) -1985.Size 24x18x8 20x16x8 | S-9/1.41.12 | 1 | Nos |
| 55 | 55 | P&F Beveled edge mirror of special glass of appd make (Atul/equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden scrwes & washers.Size 600 x 450mm x 4mm thick | S-10/1.47.1 | 16 | Nos |
| 56 | 56 | P&F towel rail or ring of approved quality /make:C.P. brass towel ring revolving type | S-12/1.50.8 | 4 | Nos |
| 57 | 57 | P&F Soap dish or tray of approved quality/ make.C.P. brass heavy and superior quality | S-13/1.55.2 | 16 | Nos |
| 58 | 58 | P&F Bath shower of approved quality/ make .C.P. brass of Heavy & superior quality, revolving with adjustable key 150mm. | S-14/1.58.3 | 12 | Nos |
| 59 | 59 | P&F CPVC Pipes in SDR 11 (Internal work) with CPVC fittings (IS:15778 Mark) including cutting and making good the walls and floors :(B) Concealed pipe in Wall 20mm dia | S-27/2.32.(B) (i) | 200 | Mtr |
| 60 | 60 | P&F CPVC Pipes in SDR 11 (Internal work) with CPVC fittings (IS:15778 Mark) including cutting and making good the walls and floors :(B) Concealed pipe in Wall 25mm dia | S-27/2.32.(B) (ii) | 200 | Mtr |
| 61 | 61 | P & F G.I. Pipes (External work) with G.I. fittings (IS:1239 Mark) including trenching & refilling earth etc.40 mm dia nominal bore. 'B' Class | S-16/2.2.5 | 200 | Mtr |
| 62 | 62 | Making connection of G.I. distribution branch with G.I. main including all fitting.Beyond 25 mm & up to 100 mm dia. | S-17/2.3.2 | 1 | Nos |
| 63 | 63 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :C.P. Brass bib cock, 15 mm nominal bore. | S-18/2.7.3 | 14 | Nos |
| 64 | 64 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :-do- Long body, 15 mm nominal bore weight not less than 690 gm. | S-18/2.7.5 | 15 | Nos |
| 65 | 65 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make :-do- Concealed Stop Cock 15 mm. | S-18/2.8.5 | 16 | Nos |
| 66 | 66 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. 400 gm, 15 mm. | S-19/2.11.1 | 6 | Nos |
| 67 | 67 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc.C.P. Inlet connection 15 mm Brass (IS:8931 marked). | S-20/2.12.1 | 30 | Nos |
| 68 | 68 | P & F 15 mm. Dia Connection pipe of approved quality/make:-do- 600 mm. | S-20/2.13.4 | 30 | Nos |
| 69 | 69 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 25 mm nominal bore. | S-21/2.15.3 | 10 | Nos |
| 70 | 70 | Gun-metal 40 mm nominal bore. | S-21/2.15.5 | 2 | Nos |
| 71 | 71 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.1000 litres capacity. | S-25/2.26.5 | 7 | Nos |
| 72 | 72 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 110mm dia | S-37/3.19.3 | 300 | Mtr |
| 73 | 73 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant 160mm dia | S-3.19.4 | 300 | Mtr |
| 74 | 74 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Bend 87.5 (110mm dia) | S-38/3.20.9 | 40 | Nos |
| 75 | 75 | Door Bend (top side) (110mm dia) | S-38/3.20.10 | 10 | Nos |
| 76 | 76 | Plain Tee (110mm dia) | S-38/3.20.3 | 50 | Nos |
| 77 | 77 | Door Tee (110mm dia) | S-38/3.20.4 | 10 | Nos |
| 78 | 78 | Vent Cowel (110mm dia) | S-38/3.20.12 | 4 | Nos |
| 79 | 79 | Plain floor trap (110mm dia) | S-38/3.20.18 | 38 | Nos |
| 80 | 80 | P&F Grating of approved quality/ make Stainless steel sheet size 125mm dia | S-12/1.51.1 | 40 | Nos |
| 81 | 81 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth upto 0.5mtr | S-39/3.21.1 | 15 | Nos |
| 82 | 82 | Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :Size 300 Cm. dia outside & 300 Cm. depth. | S-40/3.24.1 | 4 | Nos |
| 83 | 83 | Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr. IS 2470 (Part-I) 1985.Size 230x110x150cm (for 20users) | S-42/3.29.2 | 2 | Nos |
| 84 | 84 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required. Short point (up to 3 mtr.)(Group - 1) | E020501 | 50 | P. point |
| 85 | 85 | Medium point (up to 6 mtr.)(Group - 1) | E020502 | 150 | P. point |
| 86 | 86 | Long point (up to 10 mtr..)(Group - 1) | E020503 | 100 | P. point |
| 87 | 87 | Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tles, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate, screws, making connections, testing etc. as required.Long point (up to 10 mtr..)(Group - 1) | E020603 | 4 | P. point |
| 88 | 88 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. On board (Group - 1) | E020701 | 50 | P. point |
| 89 | 89 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall, covering conduit and making good the same as required. 20 mm (Group - 1) | E020401 | 300 | R. mtr. |
| 90 | 90 | 25 mm (Group - 1) | E020402 | 300 | R. mtr. |
| 91 | 91 | 50 mm (Group - 1) | E020405 | 200 | R. mtr. |
| 92 | 92 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 1 x 1.5 sq.mm (Group - 1) | E040101 | 300 | Mtr. |
| 93 | 93 | 2 x 1.5 sq.mm (Group - 1) | E040102 | 300 | Mtr. |
| 94 | 94 | 2 x 2.5 sq. mm. + 1x1.5sqmm (Group - 1) | E040108 | 500 | Mtr. |
| 95 | 95 | 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. (Group - 1) | E040117 | 200 | Mtr. |
| 96 | 96 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required. | E040800 | 80 | Nos |
| 97 | 97 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required. 6 A to 32 A rating (Group - 1) | E060112 | 72 | Nos |
| 98 | 98 | P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. 100 A rating (Group - 1) | E060233 | 4 | Nos |
| 99 | 99 | P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. 6 Way (Group - 1) | E060542 | 4 | Nos |
| 100 | 100 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. (Group - 1) | E071400 | 175 | Nos |
| 101 | 101 | P & F ISI marked 6 amp bakelite batten/angle holder including making connection testing etc. as required. (Group - 1) | E071500 | 125 | Nos |
| 102 | 102 | SITC of quick make and quick break 4 POLE current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with front face and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip ,earth fault trip, push ( test ) to trip , including making connections with lugs & spreaders, etc. as required. 200 Amp , 25/35kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu (Group - 1) | E090716 | 1 | Nos |
| 103 | 103 | up to 100 Amp , 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu (Group - 1) | E090713 | 4 | Nos |
| 104 | 104 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.25.0 Sq.mm 4 core (Armoured) | E110106D | 300 | Mtr. |
| 105 | 105 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. 3.5 core (Armoured) | E110107D | 350 | Mtr. |
| 106 | 106 | P&F bus bar chamber housed in sheet metal box made out from 1.2 mm thick powder coated CRCA sheet front openable bus bar made out of Copper suitable for 200 amp. Capacity , bus bar fixed on porcelain insulators at approved spacing including making connections etc. as required. 450 mm long , 4 strip (Group - 1) | E140702 | 1 | Nos |
| 107 | 107 | Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. below the ground level with 25 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer, nipple ,wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.(Labour Rate) | E150300 | 1 | Set |
| 108 | 108 | S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 8 SWG copper Wire (Complete Rate) | E150702 | 30 | Mtr. |
| 109 | 109 | P & F 1200 mm sweep BEE 5 star rated double ball bearing capacitor start, aluminium body & blade celling fan complying to IS 374:1979, I/P 50 watt at max speed & 230 Volt,air delivery > 210 CMM,speed >330 RPM with down rod upto 30 cm with 3X1.5 sqmm pvc insulated flexible copper conductor making connection testing etcas required. | E301500 | 50 | Nos |
| 110 | 110 | P & F box type fluorescent tube fitting fabricated from CRCA sheet and finished with powder coating / stove enamelled paint complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). 1 X 36 Watts with OCCB (Group - 1) | E190201 | 100 | Nos |
| 111 | 111 | P & F Fluorscent tube rod in existing fixtures as required, 36/40 Watts (Group - 1) | E190712 | 100 | Nos |
| 112 | 112 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . (Group - 1) | E170600 | 50 | Nos |
| 113 | 113 | p&F of IP 65 protected LED Street Light fixture 70-75 Watt (with surge protection device 10 KA) applicable for area lighting with extruded pressure diecast aluminium housing ,system lumens efficacy of 100 1m/watt minimum,toughened glass with diffuser ,suitable lenses on LED ,240V,50 Hz of high Power LED lamps supplied with pre-wired cable of 1 mtr. Integrated Driver shall be high efficiency having efficiency >85% and in compliance to IEC standards System life of 50,000 Burning Hours,CRI >80,PF>0.90 at full load,CCT 5700-6500 K (as per direction of Engineer incharge).Fixtures shall be CE compliance. | E301100 | 30 | Nos |
| 114 | 114 | S & F of Street light bracket made out from following size of ' B ' class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 40 mm Dia. | E203904 | 30 | Mtr |
| 115 | 115 | Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required. 4.0 sq.mm(Group - 1) | E040401 | 180 | Mtr |
| 116 | 116 | Wiring for sub mains ISI marked (IS:694) 1100 Volts grade PVC insulated flat twin core sheathed solid aluminium conductor with 10 SWG G.I. Support wire duly clipped etc. as required. 6.0 sq.mm(Group - 1) | E040402 | 180 | Mtr |
AI Tender Summary
Tender Timeline
Nov 16, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 26, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 26, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender