Construction Of Nayab Teshildar Residence Building At Ramseen
Tender Value
25.50 Lakhs
Estimated cost
Bid Submission
18 Nov 2019
0 days left
EMD
51000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
JALORE → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Nayab Teshildar Residence Building At Ramseen
BOQ
| Name of Work: Construction of Nayab Teshildar Residence Building at Ramseen | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART \"A\" CIVIL WORK \nEarth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed within a lead of 50 meter. All kinds of soil. | 167.154 | Cum | |
| 2 | 2 | Providing and injection Chloropyrifous Emulsifiable concentrate 20 % with 1 % concentration for PRE-CONSGTRUCTIONAL Anti termite treatment as per IS 6313 part III and amended from time to time and creating a continous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which aproch is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment.) Heptachlor E.C. 20% with 10% concentration | 98.86 | Sqm | |
| 3 | 3 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift up to 1.5 Mtr. including taking out the excavated soil and depositing and refilling of jhiri with watering and ramming and disposals of surplus excavated soil as directed with a lead in a 50 meter. Oridinary Rock | 50.1463 | Cum | |
| 4 | 4 | Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level using crusher broken aggregate 1:4:8 (1Cement :4 Course Sand :8 Graded stone aggregate 40 mm nominal size | 34.3991 | Cum | |
| 5 | 5 | Filling in plinth with locally available river shingle under floors including watering ramming consolidating and dressing complete including cost of shingles sand. | 28.3406 | Cum | |
| 6 | 6 | Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr. | 69.3912 | Cum | |
| 7 | 7 | Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall in : Cement Mortar 1:6 (1-Cement:6-Sand). | 77.4154 | Cum | |
| 8 | 8 | Random rubble dry stone Kharanja under floor. | 12.3362 | Cum | |
| 9 | 9 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. | 114.913 | Sqm | |
| 10 | 10 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level : R.C.C. grade M20 | 20.8369 | Cum | |
| 11 | 11 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: Columns, pillars, posts and struts etc. | 120.027 | Sqm | |
| 12 | 12 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work above plinth : R.C.C. grade M25 | 8.56959 | Cum | |
| 13 | 13 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, beam etc. | 197.999 | Sqm | |
| 14 | 14 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement: 1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). | 27.8906 | Cum | |
| 15 | 15 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level. Tremo Mechanically treated bars | 8594.56 | Kg. | |
| 16 | 16 | Half brick masonry in superstructure plinth using fly ash bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00 Cement mortar 1:4 (1-Cement:4-coarse sand). | 32.1898 | Sqm | |
| 17 | 17 | Brick masonary in superstructure with bricks of fly ash of class designation 75 mm in : Cement Mortar 1:6 (1-Cement:6-coarse sand). | 66.1932 | Cum | |
| 18 | 18 | P&F Vitrified Porcelain Polished tiles and approved size (600mmX600mm) as pattern (Naveen/Bell/Johnson/Kajariya) 10mm thick on floor skirting and steps etc. laid with tile admixture (Roof Pidilite of equivalent) including joints to be filled with tile grout to | 122.707 | Sqm | |
| 19 | 19 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of IS 3316-1974 Jhunjhunu / Jalore (Red / Choclate Colour) 801 to 1500 Cm2 | 8.6397 | Sqm | |
| 20 | 20 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’ Decorative Teak veener one side 35 mm thick shutter | 23.4108 | Sqm | |
| 21 | 21 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge. Profile 'B' | 53.6448 | Rmt. | |
| 22 | 22 | Supply & fixing of steel window made out 100x40 mm hollow metal pressed section of 16 gauge thick sheet partly openable and partly fixed panel shutter with 5 mm thick plain glass panes outside openable and wire gauge 14x24 gauge inside openable shutter with M.S. square bar 10 mm side, fixed, portion of window should be glazed by 5 mm thick plain glass of TG welded to M.S. frame and approved make putty with glazing clips inching joints mitred and plug welded with suitable hinges hold fast steel lug and screws with approved oxidized steel handles fittings peg stays etc. complete in all respect including providing 10 mm square MS bars 15 cm. center to cernter and applying priming coat of red oxide paints as per approved drawing by Engineer's incharge ground floor/ first floor.Size of Window 5'-6\"x6' = 33.00 Sqft or 3.07 Sqm. Hollow metal pressed section (75x40 mm) of 16 gauge. | 16.5362 | Sqm | |
| 23 | 23 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finishing with cement mortar 1 : 3 as per standard design. | 60.9756 | Rmt | |
| 24 | 24 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). Category-II : Bell, Thar make etc. | 35.6272 | Sqm | |
| 25 | 25 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). | 7.23854 | Sqm | |
| 26 | 26 | Grading roof water proofing treatment with : Cement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). | 6.18054 | Cum | |
| 27 | 27 | P&L glazded tiles pieces for roof treatment having colour and shade as approved by the engineer in charge over 20mm thick under layer of cement mortar mix 1:4 with application of cement slurry incl. finishing of joints with white cement and pigment matching the shade curing etc. complete in all respect. | 100.332 | Sqm | |
| 28 | 28 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) | 120.804 | Sqm | |
| 29 | 29 | Plaster on new surface on wall in cement sand mortar 1:6 including raking of joints etc. complete fine finish: 20 mm thick. | 874.901 | Sqm | |
| 30 | 30 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: New work (two or more coats) over and including scrapping and priming coat with cement primer. | 995.697 | Sqm | |
| 31 | 31 | Painting with enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. | 114.583 | Sqm | |
| 32 | 32 | Supplying and fixing stone liri in CM 1:4 work facing with proper projection and chisel dressing of edges of stone two line dressing of building corners, jambs etc. including uniform joints using aluminium square section of size 12 mm to 15 mm as per requirement of course and width of stone not less than 12 Cm., with requisite humber headers (minimum length of stone 0.9 M) 6 cm. to 9 Cm. thick. | 87.2064 | Sqm | |
| 33 | 33 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. | 6.70732 | Rmt | |
| 34 | 34 | Providing stone slab covering over drains including filling of joints in cement sand mortar 1:3 with 35mm thick cement concrete flooring 1:2:4 mix complete with good finish with :Stone slab 100 to 150 mm thick average | 20.8082 | Sqm | |
| 35 | 35 | Providing and fixing steel gate grating and grills made of angles, tees, square bars or other flats black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. | 15 | Kg | |
| 36 | 36 | Supplying of M.S. holdfast (40mm X 3mm) over all length 45 Cm. with splitted (end) for doors and windows as per design. | 40 | Nos | |
| 37 | 37 | PART \"B\" SANITARY WORK \nP & F Squatting Pan (Indian type) white glazed vitreous China Ist quality W.C. Pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor (excluding the pair of foot rest).Size 450 mm. | 1 | Nos | |
| 38 | 38 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. | 1 | Nos | |
| 39 | 39 | P & F water closet Seat Covers with brass hinges complete : Solid PVC (ISI marked) grade-I Black for EWC. | 1 | Nos | |
| 40 | 40 | P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556mark). Of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS:7231 | 2 | Nos | |
| 41 | 41 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall : 460 dia for counter top. | 2 | Nos | |
| 42 | 42 | P & F Looking Mirrors with P.V.C. frame of approved (Atul, Modi Guard , Saint Gobin or equivalent) Size 500x400mm | 3 | Nos | |
| 43 | 43 | P & F Towel Rail or Ring of approved quality/make: C.P. Brass Towel Ring revolving type | 3 | Nos | |
| 44 | 44 | P & F Grating of approved quality/make: Stainless Steel Sheet size 125mm dia. | 10 | Nos | |
| 45 | 45 | P & F Liquid Soap Container with brackets complete of approved make: C.P. brass | 4 | Nos | |
| 46 | 46 | P&F extension pipe for bib cocks of approved quality/ make: C.P. brass of Heavy & superior quality 150 x15mm | 10 | Nos | |
| 47 | 47 | P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. | 1 | Nos | |
| 48 | 48 | P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors: (a) Exposed on wall\n15 mm dia nominal bore 'B' Class | 30 | Rmt | |
| 49 | 49 | 25mm dia nominal bore 'B' Class | 30 | Rmt | |
| 50 | 50 | P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.\n15 mm dia nominal bore | 35 | Rmt | |
| 51 | 51 | 25mm dia nominal bore | 35 | Rmt | |
| 52 | 52 | 40mm dia nominal bore | 4 | Rmt | |
| 53 | 53 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :\nGun-metal 15 mm nominal bore. | 4 | Nos | |
| 54 | 54 | Gun-metal 25 mm nominal bore. | 4 | Nos | |
| 55 | 55 | P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make: C. P. Brass Long body, 15mm nominal bore weight not less than 690 gm | 10 | Nos | |
| 56 | 56 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make : C.P. Brass Concealed Stop Cock 15 mm. | 2 | Nos | |
| 57 | 57 | P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete : Brass wt. 400 gm, 15 mm. | 2 | Nos | |
| 58 | 58 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. 2.12.1 C.P. Inlet connection 15mm.Brass (IS : 8931 marked) with 37 cm long thread and nut | 8 | Nos | |
| 59 | 59 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type. Trap size 150 X 100mm, 7.2 Kg. C.I. cover with frame, Internal Chamber size 300 X 300mm. | 2 | Nos | |
| 60 | 60 | P & F Sand-cast Floor trap (Nahni) of (IS:1729 Mark) of approved quality / make with socket down or hinged grating including cutting and making good the floor. Size 100x100 mm. | 5 | Nos | |
| 61 | 61 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia | 25 | Rmtr | |
| 62 | 62 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:\nPlain Tee 110mm dia | 20 | Nos | |
| 63 | 63 | Bend 87 .5 110mm dia | 20 | Nos | |
| 64 | 64 | Vent Cowel 110mm dia | 20 | Nos | |
| 65 | 65 | WC connector bent type 110mm dia | 20 | Nos | |
| 66 | 66 | Plain floor trap 110mm dia | 10 | Nos | |
| 67 | 67 | Gully Trap 110mm dia | 16 | Nos | |
| 68 | 68 | Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m 10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M- 15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 600x450mm upto depth of 0.5m & 38Kg CI cover with frame | 2 | Nos | |
| 69 | 69 | Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :Size 300 Cm. dia outside & 300 Cm. depth. | 1 | Nos | |
| 70 | 70 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead. | 1 | Nos | |
| 71 | 71 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 75 mm dia | 20 | Rmt. | |
| 72 | 72 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes Type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make 110 mm dia | 23 | Rmt. | |
| 73 | 73 | Providing and Fixing Unplasticized Poly Vinyl Chloride (UPVC) SWR Pipes fittings type B for sciland waste discharge system (IS:13592 : 1992 Marked) of approved quality /make\nBend 87.5 Dg. 75mm dia | 10 | Nos | |
| 74 | 74 | Bend 87.5 Dg. 110mm dia | 10 | Nos | |
| 75 | 75 | Single Tee 75mm dia | 4 | Nos | |
| 76 | 76 | Single Tee 110mm dia | 4 | Nos | |
| 77 | 77 | Nahni Trap with Jali 4” 110mm dia | 5 | Nos | |
| 78 | 78 | P & F PVC Storage Tank (IS : 12701marked indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 1000 litres capacity. | 1 | Nos |
AI Tender Summary
Tender Timeline
Nov 15, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 20, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender