| 1 | 1 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete.\na) Fixed to steel windows by welding. | BI01010001010000000000000515BI0100001113 | 104.4 | Kg |
|---|
| 2 | 2 | Providing & fixing plain multipurpose cement board (high pressure steam cured) as per IS:14862:2000 with suitable screws for fibre cemenr board in ceiling etc. complete (frame work to be paid seperately).\n6 mm thick cemenr board | BI01010001010000000000000515BI0100001114 | 44.39 | Sqm |
|---|
| 3 | 3 | 12 mm cement plaster in single layer including cost of materials required and finishing even and smooth and curing complete.\na) In cement mortar 1 : 4 (1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001115 | 35.09 | Sqm |
|---|
| 4 | 4 | Distempering with oil bound washable distemper of approved brand and manufacture and of required shade on new work ( two or more coats ), over and including a priming coat of cement primer to give an even shade complete. | BI01010001010000000000000515BI0100001116 | 35.09 | Sqm |
|---|
| 5 | 5 | Painting with synthetic enamel paint ( two or more coats ) of required colour of approved brand and manufacture on new work to give an even shade. | BI01010001010000000000000515BI0100001118 | 4.35 | Sqm |
|---|
| 6 | 6 | Providing and fixing aluminium work for doors, windows, ventilators, stair railing including hand rail and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling to be paid for separately) :-\na)For fixed portion of approved quality:-\nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | BI01010001010000000000000515BI0100001119 | 76.773 | Kg |
|---|
| 7 | 7 | b) For shutters/ sliding shutters of doors, windows & ventilators including providing and fixing hinges / pivots / rollers and making provision for fixing fittings wherever required including the cost of PVC / neoprene gasket required of approved quality ( Fittings shall be paid for separately ):-\nAnodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). | BI01010001010000000000000515BI0100001120 | 61.579 | Kg |
|---|
| 8 | 8 | Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition frames with PVC / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge :-\na) With glass/ float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm ) | BI01010001010000000000000515BI0100001122 | 11.34 | Sqm |
|---|
| 9 | 9 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.\na) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001124 | 3.99 | sqm |
|---|
| 10 | 10 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. | BI01010001010000000000000515BI0100001125 | 2 | Nos |
|---|
| 11 | 11 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.\na) Single rubber stopper | BI01010001010000000000000515BI0100001127 | 2 | Nos |
|---|
| 12 | 12 | Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete :\na) 125 × 90 × 4.00 mm | BI01010001010000000000000515BI0100001128 | 16 | Nos |
|---|
| 13 | 13 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :\na) 300×16 mm | BI01010001010000000000000515BI0100001129 | 2 | Nos |
|---|
| 14 | 14 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. \na) 250x10 mm | BI01010001010000000000000515BI0100001131 | 4 | nos |
|---|
| 15 | 15 | Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :\nc) Local Teak Wood | BI01010001010000000000000515BI0100001132 | 0.222 | Cum |
|---|
