| 1 | 10 | Construction of Boundary wall and other | 10 | | |
|---|
| 2 | 10.01 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. | 10.01 | 825 | SQM |
|---|
| 3 | 10.02 | Supplying and filling the selected earth/ moorum (excluding black cotton soil) to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out of plot area to an unobjectional area as directed by site Engineer complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. | 10.02 | 300 | CUM |
|---|
| 4 | 10.03 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains including dressing of sides and ramming of bottoms including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer in charge | 10.03 | 180 | CUM |
|---|
| 5 | 10.04 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) | 10.04 | 95 | CUM |
|---|
| 6 | 10.05 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. 1:4:8 (1 cement : 4 coarse sand (Zone-III) : 8 graded stone aggregate 40 mm nominal size) | 10.05 | 24 | CUM |
|---|
| 7 | 10.06 | \"Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand), level as per the drawings and specifications including providing necessary scaffolding, staging, raking out of joints, curing etc complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. \" | 10.06 | 230 | CUM |
|---|
| 8 | 10.07 | Providing 12 mm cement plaster of mix 1:4 (1 cement : 4 fine sand) including rounding off and chamfering corners, curing etc. complete as per specifications. | 10.07 | 765 | SQM |
|---|
| 9 | 10.08 | Supplying and applying water proof cement based paint of required shade with three coats applied @ 3.84 Kg/10 sqm including scrapping of surface thoroughly, curing, scaffolding etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per manufacturer’s recommendations, specification and direction of Site Engineer. | 10.08 | 765 | SQM |
|---|
| 10 | 10.09 | Providing and laying in position reinforced cement concrete of 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III): 3 graded stone aggregate 20 mm nominal size) conforming to IS:456 - All work up to plinth level, including compacting with mechanical vibrator, curing etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. (Payment for Reinforcement shall be made as per relevant item of SOR). | 10.09 | 22 | CUM |
|---|
| 11 | 10.1 | \"Supplying and providing steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D or more ) conforming to IS:1786 for R.C.C. work including straightening, cutting, bending, binding with 18 gauge G.I. wire at each intersection and placing at any position, at any height and depth complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. \" | 10.1 | 1360 | KG |
|---|
| 12 | 10.11 | Supplying, fabricating and fixing M.S. structural steel work made of joists, tubes, pipes, channels, angles, plates, flats, bars etc., for struts, chain link fencing posts as per drawing including gate, ladders, safety grills, walkways, collapsible gate, signboards, supports for cable trench, making slots for barbed line, wire hoisting, placing in position, embedding in concrete, applying two coats of epoxy paint \"EPILUX 155\" High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent make as per manufacturer’s recommendation, complete in all respect including cutting to required size welding of joints, fixing anchor plates,bolts, theading, nuts, washers, sleeves etc. and necessary lettering of approved pattern on main gate, signboards etc.complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. (excluding the cost of concrete work). | 10.11 | 0.5 | TON |
|---|
| 13 | 10.12 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of the Engineer-In-Charge. 32 mm nominal outer dia pipes | 10.12 | 10 | M |
|---|
| 14 | 10.13 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of the Engineer-In-Charge. 50 mm nominal outer dia pipes | 10.13 | 30 | M |
|---|
| 15 | 10.14 | Providing and making Construction/ Contr | 10.14 | 950 | M |
|---|
| 16 | 10.15 | Providing and fixing 75mm diameter P.V.C | 10.15 | 10 | M |
|---|
| 17 | 10.16 | Centering and shuttering including strut | 10.16 | 30 | SQM |
|---|
| 18 | 10.17 | Providing and laying 60 mm thick factory | 10.17 | 20 | SQM |
|---|
| 19 | 10.18 | Providing wall art by using rich colour | 10.18 | 30 | SQM |
|---|
