| 1 | 1 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (one or more coats) | BI01010001010000000000000515BI0100001113 | 754.16 | m2 |
|---|
| 2 | 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : \nOne or more coats on old work. | BI01010001010000000000000515BI0100001114 | 350.97 | m2 |
|---|
| 3 | 3 | Floor Polishing on masonry or concrete floors with wax polish. | BI01010001010000000000000515BI0100001115 | 161.92 | m2 |
|---|
| 4 | 4 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m,disposed earth to be levelled and neatly dressed. All kinds of soil | BI01010001010000000000000515BI0100001116 | 20.91 | m3 |
|---|
| 5 | 5 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. | BI01010001010000000000000515BI0100001117 | 24.8507 | m2 |
|---|
| 6 | 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work 15 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001118 | 121.92 | m |
|---|
| 7 | 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work 25 mm nominal outer dia .Pipes. | BI01010001010000000000000515BI0100001119 | 30.48 | m |
|---|
| 8 | 8 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore | BI01010001010000000000000515BI0100001120 | 20 | Each |
|---|
| 9 | 9 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore | BI01010001010000000000000515BI0100001121 | 10 | Each |
|---|
| 10 | 10 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore | BI01010001010000000000000515BI0100001122 | 30 | Each |
|---|
| 11 | 11 | Flat back wash basin of size 630x450mm. | BI01010001010000000000000515BI0100001123 | 4 | Each |
|---|
| 12 | 12 | Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. | BI01010001010000000000000515BI0100001124 | 4 | Each |
|---|
| 13 | 13 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. | BI01010001010000000000000515BI0100001125 | 4 | Each |
|---|
| 14 | 14 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.(i)Single socketed pipes. 110 mm diameter. | BI01010001010000000000000515BI0100001126 | 24 | m |
|---|
| 15 | 15 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all loads including all lifts involved. | BI01010001010000000000000515BI0100001127 | 20.91 | m3 |
|---|
| 16 | 16 | P/F/F glazed arcylic glass panes | BI01010001010000000000000515BI0100001128 | 1.3 | m2 |
|---|
| 17 | 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4Coarse sand) including pointing the joints with white cement and matching pigment etc., complete. | BI01010001010000000000000515BI0100001129 | 4.45 | m2 |
|---|
| 18 | 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001130 | 28.42 | m2 |
|---|
| 19 | 19 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1stclass hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | BI01010001010000000000000515BI0100001131 | 7.52 | m2 |
|---|
| 20 | 21 | Total impact of GST for the purpose of CTC | BI01010001010000000000000515BI0100001132 | 1 | Nos |
|---|
