| 1 | 1 | Dismantling brick masonry in Mud and stacking the materials as directed with all leads, lifts etc. complete. | 1 | 15.21 | PerSq.M. |
|---|
| 2 | 2 | Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. | 2 | 5.47 | PerCu.M. |
|---|
| 3 | 3 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means | 3 | 20.4 | PerCu.M. |
|---|
| 4 | 4 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means | 4 | 40.8 | PerCu.M. |
|---|
| 5 | 5 | Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift from 1.5m To 3.0 m.) By Mechanical Means | 5 | 19.45 | PerCu.M. |
|---|
| 6 | 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. | 6 | 21.11 | PerCu.M. |
|---|
| 7 | 7 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. | 7 | 13.03 | PerCu.M. |
|---|
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 8 | 6.8 | PerCu.M. |
|---|
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover\nblocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 9 | 0.728 | PerCu.M. |
|---|
| 10 | 10 | FIRST FLOOR | 10 | 1.05 | PerCu.M. |
|---|
| 11 | 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks,\nlaying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 11 | 17.21 | PerCu.M. |
|---|
| 12 | 12 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 12 | 21.74 | PerCu.M. |
|---|
| 13 | 13 | FIRST FLOOR | 13 | 17.34 | PerCu.M. |
|---|
| 14 | 14 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 14 | 11.55 | PerCu.M. |
|---|
| 15 | 15 | FIRST FLOOR | 15 | 20.438 | PerCu.M. |
|---|
| 16 | 16 | Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel c entering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 16 | 5.746 | PerCu.M. |
|---|
| 17 | 17 | FIRST FLOOR | 17 | 9.75 | PerCu.M. |
|---|
| 18 | 18 | Providing and laying Cast in situ/Ready Mixcement concrete M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 18 | 1.04 | PerCu.M. |
|---|
| 19 | 19 | FIRST FLOOR | 19 | 1.04 | PerCu.M. |
|---|
| 20 | 20 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible\nDrum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) | 20 | 0.97 | PerCu.M. |
|---|
| 21 | 21 | FIRST FLOOR | 21 | 7.047 | PerCu.M. |
|---|
| 22 | 22 | Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel\ncentering, plywood/ steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a\nsmooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant | 22 | 3.77 | PerCu.M. |
|---|
| 23 | 23 | Providing and fixing in position TMT FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels,\nchajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete | 23 | 6.95405 | M.T. |
|---|
| 24 | 24 | FIRST FLOOR | 24 | 3.24969 | M.T. |
|---|
| 25 | 25 | Providing fly ash brick masonry with onventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. | 25 | 4.43493 | PerSq.M. |
|---|
| 26 | 26 | Providing Second class fly ash brick masonry with conventional / I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 mm diameter / two hoop iron strips 25 mm x 1.60 mm at every third course, properly bent and bounded at ends scaffolding raking out joints and watering etc. complete. | 26 | 14.08 | PerCu.M. |
|---|
| 27 | 27 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete FIRST FLOOR | 27 | 89.43 | PerCu.M. |
|---|
| 28 | 28 | Providing and constructing masonry in Autoclaved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS 2185 Part III 1984 of size ( 625x240x225)mm in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in\nsuperstucture including,striking joints,racking out joints watering and scaffolding etc. complete FIRST FLOOR | 28 | 11.92 | PerCu.M. |
|---|
| 29 | 29 | Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing | 29 | 30 | PerCu.M. |
|---|
| 30 | 30 | FIRST FLOOR | 30 | 30 | PerCu.M. |
|---|
| 31 | 31 | Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete | 31 | 1.8 | PerSq.M. |
|---|
| 32 | 32 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. | 32 | 70.3 | PerSq.M. |
|---|
| 33 | 33 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. | 33 | 39.12 | PerSq.M. |
|---|
| 34 | 34 | FIRST FLOOR | 34 | 112.51 | PerSq.M. |
|---|
| 35 | 35 | Providing and applying gypsum plaster ( with Gypsum material of Gypsum India / Mega Sign or equivalent make ) with finishing with gypsum material in 10 to 13 millimeter thickness to previously plastered surface / or on newly brick surface ( Excluding rough\ncast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete. | 35 | 39.12 | PerSq.M. |
|---|
| 36 | 36 | FIRST FLOOR | 36 | 112.51 | PerSq.M. |
|---|
| 37 | 37 | Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete | 37 | 431.68 | PerSq.M. |
|---|
| 38 | 38 | FIRST FLOOR | 38 | 702.8 | PerSq.M. |
|---|
| 39 | 39 | Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6mm thickness or Tape Grooves 35 to 45 mm thickness or as required, in all position including preparing the surface, scaffolding etc. complete. | 39 | 43.17 | PerSq.M. |
|---|
| 40 | 40 | FIRST FLOOR | 40 | 70.28 | PerSq.M. |
|---|
| 41 | 41 | Providing and fixing chicken mesh of 22 gauge, with about 30 cm. width at the junction of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete /B.B.masonry and or tying by binding wire etc. complete. | 41 | 165.6 | PerSq.M. |
|---|
| 42 | 42 | FIRST FLOOR | 42 | 220.8 | PerSq.M. |
|---|
| 43 | 43 | Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. | 43 | 10 | PerSq.M. |
|---|
| 44 | 44 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-\n2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing\netc. complete. a) Flooring | 44 | 467.1 | PerSq.M. |
|---|
| 45 | 45 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting | 45 | 13.44 | PerSq.M. |
|---|
| 46 | 46 | Providing and laying Polished Tandur Stone flooring 25mm to 30mm thick required width in plain/ diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat\ncement slurry, curing, polishing and cleaning etc. complete. | 46 | 4.5 | PerSq.M. |
|---|
| 47 | 47 | FIRST FLOOR | 47 | 4.5 | PerSq.M. |
|---|
| 48 | 48 | Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and\nrisers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. | 48 | 28.08 | PerSq.M. |
|---|
| 49 | 49 | Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the\ntreads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing\nand cleaning etc. complete. | 49 | 7.38 | PerSq.M. |
|---|
| 50 | 50 | Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding / moulding the edges etc. complete . Both side polish | 50 | 5.88 | PerSq.M. |
|---|
| 51 | 51 | FIRST FLOOR | 51 | 19.68 | PerSq.M. |
|---|
| 52 | 52 | Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete | 52 | 78.24 | PerSq.M. |
|---|
| 53 | 53 | FIRST FLOOR | 53 | 225.01 | PerSq.M. |
|---|
| 54 | 54 | Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including\nscaffolding etc. complete. | 54 | 78.24 | PerSq.M. |
|---|
| 55 | 55 | FIRST FLOOR | 55 | 225.01 | PerSq.M. |
|---|
| 56 | 56 | Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the\nplaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary | 56 | 431.68 | PerSq.M. |
|---|
| 57 | 57 | FIRST FLOOR | 57 | 702.8 | PerSq.M. |
|---|
| 58 | 58 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete | 58 | 0.0449987 | PerCu.M. |
|---|
| 59 | 59 | FIRST FLOOR | 59 | 0.297001 | PerCu.M. |
|---|
| 60 | 60 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | 60 | 4.2 | PerSq.M. |
|---|
| 61 | 61 | FIRST FLOOR | 61 | 5.04 | PerSq.M. |
|---|
| 62 | 62 | Providing and fixing fiber glass reinforced polyster door shutter 35 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete. | 62 | 1.58 | PerSq.M. |
|---|
| 63 | 63 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in | 63 | 9 | PerSq.M. |
|---|
| 64 | 64 | FIRST FLOOR | 64 | 9 | PerSq.M. |
|---|
| 65 | 65 | Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter | 65 | 5.4 | PerSq.M. |
|---|
| 66 | 66 | FIRST FLOOR | 66 | 30 | PerSq.M. |
|---|
| 67 | 67 | Providing and fixing in position powder\ncoated aluminium louvered windows /\nventilator of various sizes with powder\ncoating as per detailed drawing and\nspecifications including aluminium\nframes 80 x 38 mm x 1.22 mm box\ntype, 5 mm thick sheet glass louvers, of\napproved quality etc. complete. | 67 | 0.9 | PerSq.M. |
|---|
| 68 | 68 | Providing and fixing mild steel grill work\nfor windows, ventilators, etc. 15 kg/sqm\nas per drawing including fixtures\nnecessary welding and painting with\none coat of anticorrosive paint and two\ncoats of oil painting complete. | 68 | 5.4 | PerSq.M. |
|---|
| 69 | 69 | FIRST FLOOR | 69 | 27 | PerSq.M. |
|---|
| 70 | 70 | Providing and fixing 900mm high S.S.304 Grade Stainless steel railing with 40mm diameter and 1.5mm thick at top,40mm diameter and 1.5mm thick vertical supports spaced at 1.5m center to center and 8mm thick toughened glass including fabricating ,fixtures, errecting , necessary welding , grinding , finishing, buffing to stainless steel pipe etc. complete | 70 | 6.6 | PerSq.M. |
|---|
| 71 | 71 | Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 x 9 x 3 mm minimum size, crossings of M.S. flats of size 18 x 5 mm T or E section for runner of minimum 40 x 6 mm size for flange, M.S. flat for top runner of minimum size 40 x 12 mm with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 mm max. spacing of vertical channels be 100 mm enclosed gate position and clear space of 150\nmm between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etc. complete. (I.S. 105211983). | 71 | 6.09 | PerSq.M. |
|---|
| 72 | 72 | Providing flush grooved pointing with cement mortar 1:3 for brick work including scaffolding and curing etc. complete. | 72 | 305 | PerSq.M. |
|---|
| 73 | 73 | Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.Providing and Fixing of GI Lay in Plain metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color tile to be laid on grid systems with 15mm wide T section flanges color white having rotary stitching on the Main Runner, 1200 mm and 600 mm Cross Tees.products approved as per GRIHA and BS 476 etc. complete. | 73 | 4 | PerSq.M. |
|---|
| 74 | 74 | Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 kg) | 74 | 2 | Nos. |
|---|
| 75 | 75 | Providing and fixing self supporting steel roofing system for a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance + / - 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 28.75 meter having arch rise as 5.75 meter,\narch length 33.92 meter. The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 1.40 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as perapproved | 75 | 430.1 | PerSq.M. |
|---|
| 76 | 76 | Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. | 76 | 0.39 | M.T. |
|---|
| 77 | 77 | Providing and fixing 12 mm thk toughened etched glass as per the design Glass to be fixed at top & bottom in… | 77 | 6 | PerSq.M. |
|---|
| 78 | 78 | Providing and fixing signage made of 15 mmthk solid white acrylic laser cut out letters for height up to 25\" etc complete. | 78 | 15 | Inch |
|---|
| 79 | 79 | Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. height letter, figures including painting the lefters/figures with approved colour and shade complete | 79 | 1.5 | PerSq.M. |
|---|
| 80 | 80 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages /symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in | 80 | 2 | Nos. |
|---|
| 81 | 81 | Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating, bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) | 81 | 1 | PerCu.M. |
|---|
| 82 | 82 | FIRST FLOOR | 82 | 1 | Nos. |
|---|
| 83 | 83 | Providing and fixing 10cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete. | 83 | 1 | Nos. |
|---|
| 84 | 84 | FIRST FLOOR | 84 | 1 | Nos. |
|---|
| 85 | 85 | Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete | 85 | 1 | Nos. |
|---|
| 86 | 86 | FIRST FLOOR | 86 | 1 | Nos. |
|---|
| 87 | 87 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.\ncomplete | 87 | 15 | PerRgM. |
|---|
| 88 | 88 | FIRST FLOOR | 88 | 10 | PerRgM. |
|---|
| 89 | 89 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc.\ncomplete | 89 | 15 | PerRgM. |
|---|
| 90 | 90 | FIRST FLOOR | 90 | 10 | PerRgM. |
|---|
| 91 | 91 | Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved\nwooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. | 91 | 10 | PerRgM. |
|---|
| 92 | 92 | FIRST FLOOR | 92 | 40 | PerRgM. |
|---|
| 93 | 93 | Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. I. cover of 75 kg with lid and frame fixed in cement concrete. | 93 | 2 | Nos. |
|---|
| 94 | 94 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. | 94 | 1 | Nos. |
|---|
| 95 | 95 | BASIC TEST OF CEMENT. - Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness | 95 | 1 | Nos. |
|---|
| 96 | 96 | FINE AGGREGATES. - Fineness Modulus ( Sieve Analysis ),Silt & Clay Content | 96 | 1 | Nos. |
|---|
| 97 | 97 | BASIC TEST OF AGGREGATE. - Water Absorption, Specific Gravity,lmpact Value ICrushing Value. | 97 | 1 | Nos. |
|---|
| 98 | 98 | CONCRETE- Compressive Strength OF C.C. Cube\n(Set of 3 cubes). | 98 | 50 | Nos. |
|---|
| 99 | 99 | CONCRETE- Compressive Strength OF C.C. Cube\n(Set of 3 cubes). | 99 | 1 | Nos. |
|---|
| 100 | 100 | STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) | 100 | 1 | Nos. |
|---|
| 101 | 101 | Brick | 101 | 4 | Nos. |
|---|
| 102 | 102 | Tiles | 102 | 5 | Nos. |
|---|
| 103 | 103 | ROYALTY charges | 103 | 68.97 | PerCu.M. |
|---|
| 104 | 104 | PART II- ADD 12% GST | 104 | 1 | GST |
|---|
| 105 | 105 | Add 0.5% FOR LABOUR INSURANCE | 105 | 1 | LABOUR INSU. |
|---|
| 106 | 106 | Add 4% For Consultant Charges | 106 | 1 | CONTG |
|---|
| 107 | Total in Figures | | | | |
|---|