Pugf 2019-20 Providing Paver Block Pavement At Levenchipuram In Levenchipuram Village Panchayat Of Valliyoor Panchayat Union Providing Paver Block Pavement At Levenchipuram In Levenchipuram Village Panchayat Of Valliyoor Panchayat Union, Valliyoor-Tamil Nadu
TDR : 22476783
Tender Notice
BOQ
Expired
Valliyoor
Tamil Nadu
Pugf 2019-20 Providing Paver Block Pavement At Levenchipuram In Levenchipuram Village Panchayat Of Valliyoor Panchayat Union Providing Paver Block Pavement At Levenchipuram In Levenchipuram Village Panchayat Of Valliyoor Panchayat Union
Name of Work : Providing Paver block Pavement at Levenchipuram in Levenchipuram village panchayat of Valliyoor Panchayat Union
Sl.No.
Item Description
Item Code / Make
Quantity
Units
1
1
1) Providing Paver block Pavement at Levenchipuram in Levenchipuram village panchayat of Valliyoor Panchayat Union
2
2
Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B
44.64
One cubic metre
3
3
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete .
18.6
One cubic metre
4
4
Centring the soffits and sides of plain surface inclduing cost and all labour charges etc. complete
372
One Square metre
5
5
Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .
156.24
One cubic metre
6
6
Manufacturing Interlocking Rubber Moulded Paver Block of 80mm thick approved design made out of 12mm and 6mm HBGS chips in M30 mix properly cured to attain the required strength, Laying and interlocking block and well compacted using 1-3 ton capacity copressor, the cost inclusive of all materials for manufacturing, interlocking block loading transportation to work site unloading and labour charges for fixing using compressor of1-3 ton capacity including hire and fuel charges of compressor all other incidental charges etc
1562.4
One square metre
7
7
CC 1: 2 : 4 mix using 20mm HBG metal including cost and conveyance of all materials to site and all labour charges etc. complete.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
