Renovation Of Additional Building At Naharkatia Gauge Site Renovation Of Additional Building At Naharkatia Gauge Site Under Ubsd-I , Cwc , Dibrugarh During Year 2019-2020
Tender Value
9.45 Lakhs
Estimated cost
Bid Submission
18 Nov 2019
0 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Naharkatia → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Additional Building At Naharkatia Gauge Site Renovation Of Additional Building At Naharkatia Gauge Site Under Ubsd-I , Cwc , Dibrugarh During Year 2019-2020
BOQ
| Name of Work:Renovation of Additional Building at Naharkatia Gauge Site Under UBSD-I, CWC, Dibrugarh during Year 2019-2020 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Renovation of Additional Building at Naharkatia Gauge Site | ITEM | ||
| 2 | 1.01 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. | ITEM1 | 0.91 | Cum |
| 3 | 1.02 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Floor Area | ITEM2 | 53.25 | Sqm |
| 4 | 1.03 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below | ITEM3 | 15 | Each |
| 5 | 1.04 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | ITEM4 | 50.43 | Sqm |
| 6 | 1.05 | Dismantling wooden boardings in lining of walls and partitions,excluding supporting members but including stacking within 50 metres lead :Thickness above 10 mm up to 25 mm. | ITEM5 | 108.82 | Sqm |
| 7 | 1.06 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil | ITEM6 | 11.51 | Cum |
| 8 | 1.07 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete. | ITEM7 | 2.5 | Cum |
| 9 | 1.08 | CONCRETE WORK P.C.C WORK Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size). | ITEM8 | 1.97 | Cum |
| 10 | 1.09 | CONCRETE WORK P.C.C WORK Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). | ITEM9 | 5.07 | Cum |
| 11 | 1.1 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | ITEM10 | 1.9 | Cum |
| 12 | 1.11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). | ITEM11 | 2.4 | Cum |
| 13 | 1.12 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Foundations, footings, bases of columns, etc. for mass concrete | ITEM12 | 34.05 | Sqm |
| 14 | 1.13 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Lintels, beams, plinth beams, girders, bressumers and cantilevers | ITEM13 | 36.82 | Sqm |
| 15 | 1.14 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Columns, Pillars, Piers, Abutments, Posts and Struts | ITEM14 | 38.02 | Sqm |
| 16 | 1.15 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Weather shade, Chajjas, corbels etc., including edges | ITEM15 | 4.92 | Sqm |
| 17 | 1.16 | Centering and shuttering including strutting, propping etc. and removal of form for all heights :Stairs, (excluding landings) except spiral-staircases | ITEM16 | 3.72 | Sqm |
| 18 | 1.17 | Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) | ITEM17 | 2.79 | Cum |
| 19 | 1.18 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :cement mortar 1:4 (1 cement : 4 coarse sand) above plinth upto fiirst floor. | ITEM18 | 89.23 | Sqm |
| 20 | 1.19 | FINISHING CEMENT PLASTER (IN FINE SAND):20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand). | ITEM19 | 268.62 | Sqm |
| 21 | 1.2 | FLOORING AND FLOOR FINISH Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. | ITEM20 | 23.74 | Cum |
| 22 | 1.21 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc.Floor Area | ITEM21 | 47.36 | Sqm |
| 23 | 1.22 | GYPBOARD CEILING Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) White face insulating board : 12 mm thick. | ITEM22 | 47.36 | Sqm |
| 24 | 1.23 | SHEET ROOFING Providing colour coated DURSHINE/TATA BLUESCOPE zinc aluminium profile sheet (total coated thickness=0.45mm) of nominal 1015mm effectiive cover with nominal 28mm deep ribs with subtle square fluting in five panes at nominal 203mm centre to centre including fastner class 2SDS fitting and fixing complete (Roofs,Trusses,Purlins,etc. to be measured and paid separately):Roof sheet | ITEM23 | 81.84 | Sqm |
| 25 | 1.24 | Providing Bare galvalume sheet roofing accessories (RIDGES/ VALLEY/ GUTTER/ FLASHING) at all levels including fitting and fixing selfdrilling, selftapping screws complete. DURSHINE/TATA BLUESCOPE as directed by departed. 0.45 mm thick | ITEM24 | 5.4 | Metre |
| 26 | 1.25 | STEEL AND IRON WORK Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc.complete: Hot finished welded type tubes.Hot finished welded type tubes | ITEM25 | 519.6 | Kg |
| 27 | 1.26 | DOORS/WINDOWS/VENTILATORS Block board construction flush door with teak wood ply on both faces30 mm thick. Door 1 | ITEM26 | 11.34 | Sqm |
| 28 | 1.27 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer:Using M.S. angles 40x40x6 mm for diagonal braces. Door3 | ITEM27 | 2.52 | Sqm |
| 29 | 1.28 | 30 mm thick factory made solid PVC profile panelled door single piece extruded profile decorative finish (wood grain printed on both side). Door 2 | ITEM28 | 1.58 | Sqm |
| 30 | 1.29 | P.V.C. Single piece extruded door frame of profile size 50 mm x 47mm with wall thickness of 5 mm. Door2 | ITEM29 | 5.4 | Metre |
| 31 | 1.3 | Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener,including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. Window/Ventilator | ITEM30 | 280.7 | Kg |
| 32 | 1.31 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete:Fixed to steel windows by welding. Window/Ventilator | ITEM31 | 278.63 | Kg |
| 33 | 1.32 | GLASS FITTINGS Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes. Window/Ventilator | ITEM32 | 8.71 | Sqm |
| 34 | 1.33 | STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars. | ITEM33 | 181.36 | Kg |
| 35 | 1.34 | STEEL REINFORCEMENT Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. | ITEM34 | 559.91 | Kg |
| 36 | 1.35 | ANODISED ALUMINIUM FITTINGS Sliding door bolts: Providing and fixing aluminium , ISI marked anodised(anodic coating not less than grade AC 10 as per IS : 1868),transparent or dyed to required colour or shade, with nuts and screws etc. Door | ITEM35 | 7 | each |
| 37 | 1.36 | Tower bolts:Providing and fixing aluminium , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. Door | ITEM36 | 14 | each |
| 38 | 1.37 | Handles:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. Door | ITEM37 | 14 | each |
AI Tender Summary
Tender Timeline
Nov 11, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender