Military Engineer Services-MES has published Provision Of Mooring Rings Cum Earthing Points For Parking At Afs Pathankot. Submission Date for this Tender is 23-11-2019. Electrification Work Tenders in GE (AF) PATHANKOT Punjab. Bidders can get complete Tender details and download the document.
| Name of Work : PROVISION OF MOORING RINGS CUM EARTHING POINTS FOR PARKING AT AFS PATHANKOT | |||||
|---|---|---|---|---|---|
| Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Cutting/ Demolitionof PQC with breaker or suitable T&P in any position not otherwise specifically specified complete all as specified and directed. | 50 | Cum | |
| 2 | 2 | 350 mm thick PQC controlled (quality) cement concrete of minimum flexural strength 40 kg/per square centimetre in field in pavement slabs for mooring rings and making 100 mm round and 100 mm deep point for tying the rope, using 400 kg of cement per cubic metre, complete all as specified and directed. | 50 | Cum | |
| 3 | 3 | Forming construction joint 100 mm deep x 10 mm wide and filled with colpor 200 PF of FOSROC, SEAL N Flex 2K of BOSTIC, TECHSEAL PU2 grey shade of Choksey including primer as per manufacturers instruction complete all as specified and directed. | 550 | RM | |
| 4 | 4 | Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | 6500 | Kg | |
| 5 | 5 | Mild steel deformed or twisted bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. | 1350 | Kg | |
| 6 | 6 | Finishing surface of concrete roads, pavements, by brooming complete all as specified and directed. | 150 | Sqm | |
| 7 | 7 | Forming and cutting hole of dia 100 mm in PQC with core cutting machine and further extending the same hole by drilling through lower layers of DLC, WMM, GSB and soil upto a depth of 2.0 mtr from PQC top surface and providing 25 mm dia copper rod of length matching the depth of drilled hole to fuction as ststic grounding point, with top end of copper rod to be kept 35 mm below finished top surface of PQC including termination clip of copper as requirement, outer edge of the cut hole to be marked by painting two concentric coloured rings (one black and one yellow) of 50 mm width, including removal of demolished material or soil to a distance of exc 50 mtr nexc 100 mtr and filling thehole with fine sand all as complete all as specified and directed by Engineer-in-charge. | 16 | Each | |
| 8 | 8 | Supply and fix copper strip 25 x 4 mm with saddles and fixing screws etc. for earth continuity conductor complete all as specified and directed by Engrs-in- Charge. | 100 | RM | |
| 9 | 9 | Earthing complete with copper earth plate electrode 600 x600 x3 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr deep below normal ground level connected to copper strip 25x4mm size as earthing lead by means of soldering/brazing and bolts, nuts, check nuts and washers of brass,including providing earth cable protection GI pipe light grade 40mm bore up to main board, 20mm dia light grade GI watering pipe with funnel and wire mesh,including test point earth pit finished with cubical concrete chamber of inner size dimensions of 400 x400 sqmm with depth of 500 mm and concrete wall of approx 100 mm wide,the height of the chamber should not be more than 50 mm above the elevation of surrounding and MS pit cover of suitable size with adequate quantity of charcoal dust and common salt after mixing with BFC ( Back fill compound)around the earth plate including all necessary earth work in any type of soi, removing excavated material to a distance not exc500 mtr and refilling the remaining area with low resistivity soil to achive test result less than 5 ohms all as required at site and specified in electrical plate No-03 of SSR Part-1 2009 complete all as specified and directed by Engr- in – charge.\nNOTE:-(i) Main earthling lead from earth plate electrode to test point upto length of 7.5 meters length shall deem to be included in the unit rate quoted against this item.\n(ii) GI protection pipe & earthling lead beyond 7.5 metre shall be deemed to be included in the quoted rate).\n(iii) Contractor should ensure that result of each earthing is less than 5 ohm and in case soil is not suitable same is to replaced with suitable clay soil to and bring the desired result. Contrator shall visit the site and quoted the rates accordingnly | 6 | Each set |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
