School Strengthening Work In Model School , Under Nabard Ridf Xxv School Strengthening Work In Model School , Derol ( Reodar )
Tender Value
48.24 Lakhs
Estimated cost
Bid Submission
18 Nov 2019
0 days left
EMD
96480
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Derol → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
school strengthening work in model school , under nabard ridf xxv school strengthening work in model school , derol ( reodar )
BOQ
| Name of Work: School Infrastructure Strengthening work in Model School under RIDF XXV at SVGMS, DEROL (Reodar) District Sirohi | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | PART A- BUILDING WORKS\nEarth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. \nAll kinds of soils | BI01010001010000000000000515BI0100001113 | 174.27 | Cum |
| 2 | 2 | Earth,Sand ,line morrum,manure or sludge for 5 k.m.\nFilling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth , consolidating each deposited layer by ramming and watering including lead upto 50Mtr. and lift upto 1.5Mtr.\nA Good Soil | BI01010001010000000000000515BI0100001114 | 289.12 | Cum |
| 3 | 3 | Supplying and Filling in plinth with river sand under floors including watering ramming consolidating and dressing complete including cost of sand | BI01010001010000000000000515BI0100001114 | 26.89 | Cum |
| 4 | 4 | Providing and laying in position cement concrete including curing compaction etc. complete in spcified grade excluding the cost of centering and shuttering all work upto plinth level \nM10 grade Nominal Mix \n1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001114 | 11.31 | Cum |
| 5 | 5 | 1:4:8 (1 cement:4 Coarse sand :8 gradeed stone aggregate 40 mm nominal size). | BI01010001010000000000000515BI0100001114 | 141.03 | Cum |
| 6 | 6 | Providing and laying in position specified grade of reinforced cement concrete including curing compaction finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding the cost of centering, shuttering and reinforcement. All work up to plinth level :\n1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001114 | 31.9445 | Cum |
| 7 | 7 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good the joints excluding cost of centering shuttering and reinforcement :\n1:1:2 (1-Cement:1-coarse sand:2-graded stone aggregate 20 mm nominal size).\nM-25 grade | BI01010001010000000000000515BI0100001114 | 5.59 | Cum |
| 8 | 8 | Reinforced cement concrete work in beams, suspended floors, roofs, girders having slopes up to 15o , landings, balconies, shelves, chajjas, lintels, bands, plain windows sills, staircases and spiral staircases, up to floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1-Cement:3-coarse sand) and making good and joints excluding the cost of centering, shuttering and reinforcement:\n1:1.5:3 (1-Cement:1.5 coarse sand:3-graded stone aggregate 20 mm nominal size). | BI01010001010000000000000515BI0100001114 | 43.33 | Cum |
| 9 | 9 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways and removal of formwork for foundations in basements rafts, footings, strap beams, bases of columns , etc. up to plinth level. | BI01010001010000000000000515BI0100001114 | 43.62 | Sqm |
| 10 | 10 | Centering & shuttering with plywood or steel sheets including strutting, propping bracing both ways with steel props and removal of formwork for upto floor five level for :\nCentering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for:\nSuspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands , coping, bed plates, anchor blocks, sills, chhajjas lintel, \n | BI01010001010000000000000515BI0100001114 | 373.355 | Sqm |
| 11 | 11 | Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of formwork for superstructure up to 4.5 mtr above plinth, for:\n Columns, pillars, posts and struts etc. | BI01010001010000000000000515BI0100001114 | 250.76 | Sqm. |
| 12 | 12 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor three level.\nThermo-mechanically Treated bars (Conforming of relevent IS code) | BI01010001010000000000000515BI0100001114 | 10108.1 | Kg. |
| 13 | 13 | Brick work with machine moulded perforated brick of class designation 125 confirming IS: 2222-1991 in super structure above plinth level V level in CM 1:6 \nWith F.P.S. Bricks\n | BI01010001010000000000000515BI0100001114 | 27.88 | Cum |
| 14 | 14 | Half brick masonry in foundation & plinth using bricks of designation 75 with nominal hoop rainforsed (2 Nos. 6mm MS bar) at every fourth course in for hoop rainforcement 1Sqm. 6mm MS bar 2x2x1.00 = 4.00\nCement mortar 1:4 (1-Cement:4-coarse sand).\nAdd extra over item No. 5.8 for half brick masonary in superstructure up to third story.\n | BI01010001010000000000000515BI0100001114 | 131.87 | Sqm |
| 15 | 15 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:\nCement Mortar 1:6 (1-Cement:6-Sand). | BI01010001010000000000000515BI0100001114 | 152.578 | Cum |
| 16 | 16 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).\nCategory-I : Kajariya, Jhonson, Orient, Somani make etc.\n | BI01010001010000000000000515BI0100001114 | 179.091 | Sqm |
| 17 | 17 | Providing and fixing Ist quality MAT finished ceremic tile size 300x300mm confirming to IS : 13753 colour such as white, grey, ivory, fume red brown in walls, floors, steps, pillars etc. laid on a bed of neat cement slsurry including nicely finished joints using water proof joint filler power (Untile or Roffe make) and finishing with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster). | BI01010001010000000000000515BI0100001114 | 53.222 | Sqm |
| 18 | 18 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).\nAdd extra over item No. 7.3, 7.4 & 7.5 for marble printed, granite shade tile.\nCategory-I : Kajariya, Jhonson, Orient, Somani make etc.\n | BI01010001010000000000000515BI0100001114 | 179.091 | Sqm |
| 19 | 19 | Providing and fixing Ist quality standard White Ivory Glazed Tiles ISI marked [IS:13753] of size 300mm x 200mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in white cement mixed with pigment to match the shade of tile complete (excluding the cost of cement plaster).\nExtra for using size above 200x300mm in glazed tiles and for using 400mm x 400mm MAT finished tiles in place of 300mm x 300mm size. | BI01010001010000000000000515BI0100001114 | 179.091 | Sqm |
| 20 | 20 | Providing and fixing Granite stone slab mirror polished and machine edge cut in Walls, Pillars, Steps, Shelves, Sills, Counters. Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 jointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with pigment to match the shade of the marble slab complete including grinding, rubbing and polishing of:\nSouth (Red / Choclate Colour)\nSize above 3600 Cm2 | BI01010001010000000000000515BI0100001114 | 8.31 | Sqm |
| 21 | 21 | Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal, dehydreresin in glue both sides with approved steel fittings complete as per Annexure ‘A’\n30 mm thick shutter | BI01010001010000000000000515BI0100001114 | 5.04 | Sqm |
| 22 | 22 | Add extra for Flush doors\nFor Internal teak wood lipping in 25mm depth in single leaf. | BI01010001010000000000000515BI0100001114 | 5.04 | Sqm |
| 23 | 23 | Add extra for Flush doors\nExtra for cutting rebate in flush door shutters (Total area of the shutter to be measured). | BI01010001010000000000000515BI0100001114 | 5.04 | Sqm. |
| 24 | 24 | Hydraulic Door closer | BI01010001010000000000000515BI0100001114 | 3 | Each |
| 25 | 25 | P&F of plastic shutter infill made from multi chamber hollow PVC sections having cross section of 200x20x1mm and shutter frame made from Aluminium C section size 23.6x20x1.8mm and door fitting such as hinges, aldrop, handles, stopper, locking bolt will be provided\nSingle shutter door\n | BI01010001010000000000000515BI0100001114 | 12.6 | Sqm. |
| 26 | 26 | Providing and fixing pressed steel mitred door frames manufactured from commercial mild steel sheet of 1.25 mm (16 gauge) thickness including hinges jamb, lock jamb, head and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25 mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge.\nProfile B | BI01010001010000000000000515BI0100001114 | 14.72 | Mtr. |
| 27 | 27 | Providing and fixing in CM 1:4 double paitam (rebated) stone door window and ventilator frames of approved quarry :\nSize 100 x 75mm. | BI01010001010000000000000515BI0100001114 | 46.96 | mtr |
| 28 | 28 | Providing & fixing ms sheet single leaf door shutters in angle iron frame 35x35x5 mm suitablly diagonally braced with 25x3mm flat ironabove and below lock rail of size 50x5 mm beading extra includingall fittings, as per direction of engg. incharge but excluding coes of chokhats including two coats of anti corrastie red oxide primer panit.\nMS sheet 22 SWG\nAdd extra for double leaf shuttters\n\n | BI01010001010000000000000515BI0100001114 | 2.52 | Sqm |
| 29 | 29 | Providing and fixing steel glazed window frame made out of 80x40 mm hollow sheet section of 16 gauge thickness, joint mitred welded and grinded including hold fast of steel lugs 13mm x 3mm and 15 Cm. long embedded in C.C. block 15x10x10 Cm. of 1:3:6 nominal concrete and including fixing of pivoted hinges of superior quality, window shutters made out of 55x20mm hollow steel section 15 mm paitam of 18 gauge thickness, joint mitred and grinded including 10mm x 10mm square bars welded to frame for paitam fixing float glass 4 mm thick panes with glazing clips and metal sash putty and fixing of shutters frames peg stay, U shape handle 100 mm long, tower bolts 100 mm long of steel power coated superior quality including fixing and jointing with frame hinges priming coat with steel primer complete in all respect as per direction\nWindow openable. | BI01010001010000000000000515BI0100001114 | 16.22 | Sqm |
| 30 | 30 | Window fixed. | BI01010001010000000000000515BI0100001114 | 6.24 | Sqm |
| 31 | 31 | Add extra over item no. 9.28 for \nPorvding brass handles/peg stays and fittings in place of oxidised fittings.\n | BI01010001010000000000000515BI0100001114 | 16.22 | Sqm. |
| 32 | 32 | Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. | BI01010001010000000000000515BI0100001114 | 16.22 | Sqm. |
| 33 | 33 | Providing and fixing Square bars or other flat welded to window, ventilators etc. | BI01010001010000000000000515BI0100001114 | 157.77 | Kg. |
| 34 | 34 | Grading roof water proofing treatment with :\nCement concrete 1:2:4 (1-Cement:2-coarse sand :4-graded stone aggregate 20mm nominal size). | BI01010001010000000000000515BI0100001114 | 10.8013 | Cum |
| 35 | 35 | Providing batta (gola) 75mm x 75mm in cement concrete (1:2:4) including finished with cement mortar 1:3 as per standard design. | BI01010001010000000000000515BI0100001114 | 52.25 | Mtr. |
| 36 | 36 | Making khurras 450 x 450mm with average minimum thickness 50 mm cement concrete 1:2:4 over P.V.C. Sheet 1 Mtr. x 1 Mtr. x 40 micron finished with 12 mm cement plaster 1:3 and one coat of neat cement, rounding edges and making and finishing the out let complete. | BI01010001010000000000000515BI0100001114 | 5 | Each |
| 37 | 37 | Providing and laying 20 to 25 mm size glazed tiles pieces for rooof treatment having colour and shade as approved by the Engineer incharge over 25 mm thick layer of cement mortar mix 1:4 with application of cement slurry including finishing of joints with ordinary cement and curing etc. complete in all respect. Washing with acid. | BI01010001010000000000000515BI0100001114 | 634.46 | Sqm |
| 38 | 38 | For area of each slab up to 2001 to 5000 Sq. Cm : \n(A) 25 mm thick slab.\n | BI01010001010000000000000515BI0100001114 | 171.153 | Sqm |
| 39 | 39 | Polished Blue Kota Stone flooring skirting, laid over 20 mm thick base of C.M. 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete :\nFor area of each slab up to 901 to 2000 Sq. Cm :\n(A) 25 mm thick slab. | BI01010001010000000000000515BI0100001114 | 39.68 | Sqm |
| 40 | 40 | Random rubble dry stone Kharanja under floor.. | BI01010001010000000000000515BI0100001114 | 181.67 | Cum |
| 41 | 41 | Providing and fixing of Precast concrete interlocking blocks of manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS : 6717-2001. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lift, lifts & taxes general specifications of blocks.\nb) 80mm thick | BI01010001010000000000000515BI0100001114 | 1098 | Sqm |
| 42 | 42 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: \n20mm thick. | BI01010001010000000000000515BI0100001114 | 479.795 | Sqm |
| 43 | 43 | Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: \n12mm thick. | BI01010001010000000000000515BI0100001114 | 437.25 | Sqm |
| 44 | 44 | 6mm cement plaster to ceiling of mix 1:3 (1 Cement : 3 fine sand) | BI01010001010000000000000515BI0100001114 | 183.253 | Sqm. |
| 45 | 45 | Making grooves as per design in plaster 10mm to 20mm wide. | BI01010001010000000000000515BI0100001115 | 130 | Rm |
| 46 | 46 | Applying plaster of Paris over cement plaster surface for making even surface.\nApplying plaster of Paris over cement plaster surface for making even surface. | BI01010001010000000000000515BI0100001117 | 935.298 | Sqm |
| 47 | 47 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: \nTwo or more coats on new work including preparation of base with primer, putty, lippy complete in all respect. \n | BI01010001010000000000000515BI0100001117 | 620.503 | Sqm |
| 48 | 48 | Decorative plaster work with spectrum textured coating as per approved colour and shade complete as per manufactures specifications.\nPERKY FINE TEXTURED (Roller Finish) av. Thickness 400 to 500 microns. | BI01010001010000000000000515BI0100001117 | 479.795 | Sqm |
| 49 | 49 | Applying priming coat: \nWith ready mix pink or gray primer of approved brand and manufacture on wood work hard and soft wood. | BI01010001010000000000000515BI0100001117 | 15 | Sqm |
| 50 | 50 | Painting with enamel paint of approved brand and manufacture to give an even shade: \nTwo or more coats on new work. | BI01010001010000000000000515BI0100001117 | 441.841 | Sqm |
| 51 | 51 | Lettering with black Japan paint of approved brand and manufacture. | BI01010001010000000000000515BI0100001117 | 500 | P. Letter\nPer cm. height |
| 52 | 52 | Supply & fixing of stainless steel pipe railing for ramp railing height, 90 cm. with 40 mm dia stainless steel pipe with 18 gauge with drop (vertical post) at 90 cm. C/C and intermidiate horizontal pipe with suitable height of same size and gauge with coupling, grinding and polishing & fix of master pieces as per required point as per approved design of Engineer incharge. | BI01010001010000000000000515BI0100001117 | 12 | Sqm |
| 53 | 53 | NON BSR ITEM\nProviding and fixing Pre cast Reinforcement Cement concrete Chattari at terraceof the building 1 st floor, The chhatri shall be made precast Reinforcement cement concrete by using the reinforcement and applying carving graving and Nakashi work of superior quality as shown in the drawing. The chattri shall be have four side part of size 1000x1100 mm above the square portion of chhatri the round gumbad shall be of 1000 mm diameter and the height of gumbad shall be of 730 mm and above round gumbad a spike of cement precast concrete 320 mm . The total height of chhatri from bottom to top of spike shall be of 25370 mm. The chhatri shall be projected at junction of gumbad al around 210 mm. The work shall be carried out as per given drawing. The rates are inclusive of all item involved in the item of work and placining in position etc all complete as per drawing and direction of Engineer in charge. | BI01010001010000000000000515BI0100001117 | 6 | Nos. |
| 54 | 54 | Providing and fixing Pre cast Reinforcement cement concrete Arch (Mehrab) of average thickness 50 mm and the hight shall be 975 mm as per the drawing. The work shall apply of Craving and Nakashi work of superior quality as shown in the drawing. The rates are inclusive of cement concreting, centering shuttering, reinforcement, plastering the surface with cement plaster 1 : 3 (1 cement : 3 fine sand) The including fixing in position etc all complete as the drawing and direction of Engineer in charge. | BI01010001010000000000000515BI0100001117 | 10 | Rmt. |
| 55 | 55 | SANITORY WORK -\nP & F Indian type white glazed vitreous china Ist quality W.C. orissa pan (IS:2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor :\nSize 580x440 mm. | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 56 | 56 | P & F European type white glazed vitreous china Ist quality W.C. pan (IS:2556 Mark) with P or S trap including cutting and making good the wall and floor. | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 57 | 57 | P & F water closet Seat Covers with brass hinges complete :\nSolid PVC (ISI marked) grade-I White for EWC. | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 58 | 58 | P & F Low level Flushing Cistern of 10 litres capacity (IS:2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball, (IS:1703 mark) complete including cutting and making good the wall : \nPVC with PVC bend as per IS : 7231 | BI01010001010000000000000515BI0100001117 | 9 | Each |
| 59 | 59 | P & F Ist quality WVC Urinal (IS:2556 mark) with 25 mm dia G.I. waste pipe, dome couplings, concealed iron brackets or screws etc. complete.\nMini stall size 440x315x320 mm. | BI01010001010000000000000515BI0100001117 | 7 | Each |
| 60 | 60 | P & F W.V.C. Urinal Partition plate of approved standard make of size 630x315 mm including making good the wall. | BI01010001010000000000000515BI0100001117 | 6 | Each |
| 61 | 61 | P & F C.P. brass Urinal Flush pipe set complete with flanged brackets of approved make.\nFor 3 Urinals | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 62 | 62 | P & F C.P. brass Urinal Spreader for stall urinal of approved make. | BI01010001010000000000000515BI0100001117 | 7 | Each |
| 63 | 63 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make 25 mm G.I. waste pipe complete including cutting & making good the wall :\nSize 530 mm x 450 mm | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 64 | 64 | P&F waste coupling with fitting of approved quality/ make :\nC.P. brass 32mm dia | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 65 | 65 | P&F Grating of approved quality/ make\nStainless steel sheet size 125mm dia | BI01010001010000000000000515BI0100001117 | 20 | Each |
| 66 | 66 | P&F liquid soap contained with brackets complete of approved make : \nC.P. brass | BI01010001010000000000000515BI0100001117 | 4 | Each |
| 67 | 67 | P&F Soap dish or tray of approved quality/ make.\nC.P. brass | BI01010001010000000000000515BI0100001117 | 4 | Each |
| 68 | 68 | P&F Jet spray for water closet with C.P. copper tube flange of approved make | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 69 | 69 | Providing and fiixng C.P. flange for 15mm dia tap.s | BI01010001010000000000000515BI0100001117 | 20 | Each |
| 70 | 70 | P & F Pillar Cocks (IS:8934 Mark) of superior quality and approved make :\nC.P. Pillar cock 15 mm dia nominal bore. | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 71 | 71 | P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :\nC.P. Brass bib cock, 15 mm nominal bore. | BI01010001010000000000000515BI0100001117 | 20 | Each |
| 72 | 72 | P & F Stop cock (IS:8931 Mark) superior quality & of approved make :\nC.P. Brass 15 mm nominal bore. | BI01010001010000000000000515BI0100001117 | 10 | Each |
| 73 | 73 | P & F 15 mm. Dia Connection pipe of approved quality/make:\nPVC pipe with C.P. Brass nuts up to length 600mm. | BI01010001010000000000000515BI0100001117 | 10 | Each |
| 74 | 74 | P & F Full-way valve (IS:778 Mark) or wheel valve of approved make :\nGun-metal 25 mm nominal bore. | BI01010001010000000000000515BI0100001117 | 5 | Each |
| 75 | 75 | P & F PVC Storage Tank (IS:12701 marked indicating the BIS license No.) of approved make with cover, 25 mm dia 1 M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc. complete of approved design.\n1000 litres capacity. | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 76 | 76 | Providing and fixing Polyethylene – Aluminium Polyethylene (PE-AL-PE) composite Pressure Pipes U.V. stablised with carbon black conforming to ASTMF – 1282 – 1995 for water supply including cutting and making good the walls etc.\n1620 (20 mm OD) pipe | BI01010001010000000000000515BI0100001117 | 80 | Rm |
| 77 | 77 | 2025 (25 mm OD) pipe | BI01010001010000000000000515BI0100001117 | 60 | Rm |
| 78 | 78 | Providing and fixing Polyethylene – Aluminium – Polyethylene (PE-AL-PE) Composite Pressure Pipe U.V. stablised with carbon black conforming to ASTMF – 1282 – 1995 for water supply including trenching and refilling etc. (External Work).\n2025 (25 mm OD) pipe | BI01010001010000000000000515BI0100001117 | 50 | Rm |
| 79 | 79 | P & F Square-mouth gully trap `A` grade (IS :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type.\nTrap size 150 X 100mm, 7.2 Kg. C.I. cover with frame, Internal Chamber size 300 X 300mm. | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 80 | 80 | P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant\n160mm dia | BI01010001010000000000000515BI0100001117 | 20 | Mtr |
| 81 | 81 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:\nBend 45\n110 mm dia | BI01010001010000000000000515BI0100001117 | 5 | Each |
| 82 | 82 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.\n110 mm dia | BI01010001010000000000000515BI0100001117 | 85 | Mtr. |
| 83 | 83 | Providing and fixing unplasticized Poly Vinyl Chloride (UPVC) SWR pipes type `B' for sciland waste dischareg system (IS : 13592: 1992 marked) of approved quality/ make.\nCoupler\n110mm dia | BI01010001010000000000000515BI0100001117 | 15 | Each |
| 84 | 84 | Bend 45 Dg.\n110mm dia | BI01010001010000000000000515BI0100001117 | 3 | Each |
| 85 | 85 | Door Bend 87.5 Dg.\n110mm dia | BI01010001010000000000000515BI0100001117 | 3 | Each |
| 86 | 86 | Single 'Y'\n110mm dia | BI01010001010000000000000515BI0100001117 | 10 | Each |
| 87 | 87 | Socket Plug\n110mm dia | BI01010001010000000000000515BI0100001117 | 3 | Each |
| 88 | 88 | Pipe Clip\n110mm dia | BI01010001010000000000000515BI0100001117 | 30 | Each |
| 89 | 89 | W.C. Connector\n110mm dia | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 90 | 90 | W.C. Connector (Bend) with ring\n110mm dia | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 91 | 91 | Nahni Trap without Jali 4”\n110mm dia | BI01010001010000000000000515BI0100001117 | 20 | Each |
| 92 | 92 | Vent Cowel \n110mm dia | BI01010001010000000000000515BI0100001117 | 3 | Each |
| 93 | 93 | Construction of manhole in all type of soil inner size 90 X 60 Cm. thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5 10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring,making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C.flooring , 25 Kg. CI cover with frame of 40mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.\nDepth upto 0.5mtr | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 94 | 94 | Construction of septic tank in all type sof soil with 40cm thick masonry in CM 1:6 15cm thick CC bed of 1:5:10 M-15 grade CC flooring & over stone slab covering, 80mm thick slab jointing of slab in CM 1:3, Ralthal, Kharanja, 50mm thick stone partiton walls, 20mm thick plaster in CM 1:6 finished with neat floating cement, 4Nos C.I. foot rests of approved design, two No. 450mm dia 25Kg each C.I. cover with frame, earth work etc. complete as per approed drawing incl. disposal of surplus earth wtihin a lead of 50mtr.\nSize 400x140x150cm (for 50users) | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 95 | 95 | Construction of soakage well in all type of soil 300 mm thick dry masonry top and bottom 300 mm course in CM 1:6, 80 mm thick stone slab, jointing of slab in CM 1:3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C. flooring, earth work complete as per approved drawing including disposal of earth within a lead of 50 mtr. :\nSize 300 Cm. dia outside & 300 Cm. depth. | BI01010001010000000000000515BI0100001117 | 2 | each |
| 96 | 96 | Providing & Laying C.C. 1:5:10 (Stone aggregate 40 mm nominal size) upto haunches of S.W. pipes including 150 mm thick bed concrete as per Rajasthan P.W.D. specifications (Width W=Dia of pipe in Cm+40Cm.) concrete width to be reduced from width W at center of pipe to '0' at top of pipe (Excluding cost of pipe).\n100mm dia S.W. Pipe. | BI01010001010000000000000515BI0100001117 | 70 | Mtr. |
| 97 | 97 | ENTERNAL ELECTRICAL\nPOINT WIRING - \nWiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate, screws, making connections, testing etc. as required.\nShort point (up to 3 mtr.) | BI01010001010000000000000515BI0100001117 | 8 | P. point |
| 98 | 98 | Medium point (up to 6 mtr.) | BI01010001010000000000000515BI0100001117 | 14 | P. point |
| 99 | 99 | Long point (up to 10 mtr..) | BI01010001010000000000000515BI0100001117 | 14 | P. point |
| 100 | 100 | Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & it's accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modular switch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required.\nOn board | BI01010001010000000000000515BI0100001117 | 10 | P. point |
| 101 | 101 | Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost of modular 16 amp. Switch and socket outlet , making connection , testing , etc. as required. | BI01010001010000000000000515BI0100001117 | 10 | Each |
| 102 | 102 | S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. \n25 mm (for Light Circuit, Power circuit & Tel. Cable) | BI01010001010000000000000515BI0100001117 | 150 | R. mtr. |
| 103 | 103 | Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. (Group-1)\n1 x 1.5 sq.mm | BI01010001010000000000000515BI0100001117 | 150 | Mtr. |
| 104 | 104 | 2 x 2.5 sq. mm. + 1x1.5sqmm (Light Circuit) | BI01010001010000000000000515BI0100001117 | 150 | Mtr. |
| 105 | 105 | P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size. (Armoured Cable)\n16.0 Sq.mm\n4 core | BI01010001010000000000000515BI0100001117 | 50 | Mtr. |
| 106 | 106 | Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size.\n4 x 16.0 sq.mm | BI01010001010000000000000515BI0100001117 | 1 | Set |
| 107 | 107 | DB & MCB\nP&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with suitable rating insulated copper bus bar, shorting link , neutral link, earth link and din bar,masking sheet, conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.\nDouble door (Three phase)\n12 Way | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 108 | 108 | P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections, testing etc. as required.\nSingle pole MCB \n 6 A to 32 A rating | BI01010001010000000000000515BI0100001117 | 6 | Each |
| 109 | 109 | Four pole MCB\n 40 A to 63 A rating | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 110 | 110 | P&F 240/415 V Residual current circuit breaker conforming to IS:12640:1988/ IEC 61008 on existing board/sheet including making connections, testing etc. as required\nTwo pole 100/300mA sensitivity\n40 A rating | BI01010001010000000000000515BI0100001117 | 1 | Each |
| 111 | 111 | FAN & LIGHT FIXTURES \nP & F double ball bearing capacitor start, aluminium body & blade ceiling fan with down rod up to 30 cm with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required.\n1200 mm sweep | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 112 | 112 | P & F 18 swg M.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm, 12 mm dia rod fan hook with 100 mm length extended on each side . | BI01010001010000000000000515BI0100001117 | 10 | Each |
| 113 | 113 | P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required\n5 step fan regulator 2 Module | BI01010001010000000000000515BI0100001117 | 10 | Each |
| 114 | 114 | P & F of ventilating fans, Capacitor start, single phase with PVC impeller, ABS body, automatic openable louver shutter in existing opening including making connection, testing etc. as required.\n250 mm sweep | BI01010001010000000000000515BI0100001117 | 2 | Each |
| 115 | 115 | P & F IS:371 marked 6 amp surface type ceiling rose including making connection testing etc. as required. | BI01010001010000000000000515BI0100001117 | 8 | Each |
| 116 | 116 | P & F strip type fluorscent tube fitting fabricated from (CRCA sheet and finished with powder coating / stove enamelled paint) / (extruded non corrosive UV resist EP channel) complete with accessories (Low Loss Copper Choke, starter, starter seat) / Electronic Choke with terminal block duly prewired with copper conductor including making connection, testing etc. as required( without tube). Group 1\n1 X 36 Watts with EB | BI01010001010000000000000515BI0100001117 | 15 | Each |
| 117 | 117 | Flourscent powder coated (minimum 3 star rating)\n36/40 Watts | BI01010001010000000000000515BI0100001117 | 15 | Each |
| 118 | 118 | P & F IP-65 protected Wall mounted Bulk Head light fixture suitable for 15/18 watt CFL lamp with integral control gear, housing made from cast aluminium with UV stablized diffuser comprising of copper ballast, copper conductor including making connection testing etc. as required (without lamp) | BI01010001010000000000000515BI0100001117 | 3 | Each |
| 119 | 119 | P & F two pin energy efficient compact fluorscent lamp in existing holder/fixture as required.\n13/18 watt | BI01010001010000000000000515BI0100001117 | 3 | Each |
AI Tender Summary
Tender Timeline
Nov 08, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 19, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender