Pro 108/20 Maintenance Of Various Anganavadies In Ward 1 , 7 , 8 , 9 Maintenance
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
20 Nov 2019
0 days left
EMD
23800
Bank guarantee accepted
Document Fee
2261
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
KALLUR → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Pro 108/20 Maintenance Of Various Anganavadies In Ward 1 , 7 , 8 , 9 Maintenance
BOQ
| Work Name:Thrikkur GP 2019-20 Pro.No.108/20 Maintenance of Various Anganavady Ward-1, 7. 8 & 9 | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Anganavadi No. Ward-9(Priyadarsini) | BI01010001010000000000000515BI0100001113 | ||
| 2 | 1.001 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001114 | 0.702 | cum |
| 3 | 1.002 | 60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site | BI01010001010000000000000515BI0100001115 | 0.702 | cum |
| 4 | 1.003 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | BI01010001010000000000000515BI0100001116 | 0.66 | cum |
| 5 | 1.004 | 13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001117 | 3.3 | sqm |
| 6 | 1.005 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001118 | 1.913 | sqm |
| 7 | 1.006 | 4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001119 | 0.108 | cum |
| 8 | 1.007 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001120 | 1.625 | sqm |
| 9 | 1.008 | od346583/2019_2020 : supplying and fitting 20 mm thick ferrocement slabs for partition of shelves including cost of conveyance, labour for fixing, pointing etc complete | BI01010001010000000000000515BI0100001121 | 9.72 | sqm |
| 10 | 1.009 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001122 | 29.161 | kg |
| 11 | 1.01 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001123 | 24.3 | kg |
| 12 | 1.011 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001124 | 4.32 | sqm |
| 13 | 1.012 | od346681/2019_2020 : White cement washing one coat including all labour, material,conveyance charge etc complete | BI01010001010000000000000515BI0100001125 | 9.72 | sqm |
| 14 | 1.013 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001126 | 9.72 | sqm |
| 15 | 1.014 | 14.66.2 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work (One or more coat applied @ 0.90 ltr/10 sqm) | BI01010001010000000000000515BI0100001127 | 193.465 | sqm |
| 16 | 1.015 | 14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work | BI01010001010000000000000515BI0100001128 | 21.113 | sqm |
| 17 | 1.016 | 10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | BI01010001010000000000000515BI0100001129 | 93.501 | kg |
| 18 | 1.017 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001130 | 0.072 | cum |
| 19 | 2 | Anganavadi No. Ward-7 | BI01010001010000000000000515BI0100001131 | ||
| 20 | 2.001 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001132 | 500 | kg |
| 21 | 2.002 | 51.18.12.7 : Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) External work - 65 mm nominal dia | BI01010001010000000000000515BI0100001133 | 21.6 | metre |
| 22 | 2.003 | od344065/2019_2020 : Roofing with GI hard colour powder coated traffold sheets 0.35mm thick or nearest available thickness with overlaps of 150mm at ends and GI hook or crank C.I. bolts and nuts including plain washers and bitumin washers etc complete. | BI01010001010000000000000515BI0100001134 | 90 | sqm |
| 23 | 2.004 | od344068/2019_2020 : Ridge caping with prepainted galvanised steel sheets 0.5mm thick 60cm wide including all cost and materials, conveyance ,labour charges etc complete. | BI01010001010000000000000515BI0100001135 | 10 | metre |
| 24 | 2.005 | 10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | BI01010001010000000000000515BI0100001136 | 600 | kg |
| 25 | 2.006 | od344073/2019_2020 : Providing and fixing U PVC rain water collection gutters (200 x 150mm) of approved make including cost of necessary fittings, labourfor fixing, scaffolding charge etc complete.<br> | BI01010001010000000000000515BI0100001137 | 20 | metre |
| 26 | 2.007 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001138 | 81.495 | sqm |
| 27 | 2.008 | 50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001139 | 24 | metre |
| 28 | 2.009 | 50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001140 | 5 | metre |
| 29 | 2.01 | 50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall | BI01010001010000000000000515BI0100001141 | 10 | metre |
| 30 | 2.011 | od345712/2019_2020 : Engaging Fitter/Plumber for repairing works | BI01010001010000000000000515BI0100001142 | 2 | each |
| 31 | 2.012 | od344521/2019_2020 : Engaging labour including all charges | BI01010001010000000000000515BI0100001143 | 5 | each |
| 32 | 2.013 | 4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) | BI01010001010000000000000515BI0100001144 | 1.511 | cum |
| 33 | 2.014 | od346143/2019_2020 : Flooring with Designer tiles for external use in CM 1:3, 12 MM and pointing with coloured cement including all cost of materials labour charges conveyance etc. complete | BI01010001010000000000000515BI0100001145 | 20.14 | sqm |
| 34 | 2.015 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001146 | 18.92 | sqm |
| 35 | 2.016 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001147 | 0.929 | cum |
| 36 | 3 | Anganavadi No. 41 Ward-8 | BI01010001010000000000000515BI0100001148 | ||
| 37 | 3.001 | 51.18.12.7 : Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately) External work - 65 mm nominal dia | BI01010001010000000000000515BI0100001149 | 25.2 | metre |
| 38 | 3.002 | od344065/2019_2020 : Roofing with GI hard colour powder coated traffold sheets 0.35mm thick or nearest available thickness with overlaps of 150mm at ends and GI hook or crank C.I. bolts and nuts including plain washers and bitumin washers etc complete. | BI01010001010000000000000515BI0100001150 | 77.05 | sqm |
| 39 | 3.003 | 10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | BI01010001010000000000000515BI0100001151 | 536 | kg |
| 40 | 3.004 | od344068/2019_2020 : Ridge caping with prepainted galvanised steel sheets 0.5mm thick 60cm wide including all cost and materials, conveyance ,labour charges etc complete. | BI01010001010000000000000515BI0100001152 | 7.5 | metre |
| 41 | 3.005 | od344073/2019_2020 : Providing and fixing U PVC rain water collection gutters (200 x 150mm) of approved make including cost of necessary fittings, labourfor fixing, scaffolding charge etc complete.<br> | BI01010001010000000000000515BI0100001153 | 35.1 | metre |
| 42 | 3.006 | 50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001154 | 22.8 | metre |
| 43 | 3.007 | 5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | BI01010001010000000000000515BI0100001155 | 3.24 | sqm |
| 44 | 3.008 | 4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001156 | 0.576 | cum |
| 45 | 3.009 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001157 | 67 | sqm |
| 46 | 3.01 | 10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | BI01010001010000000000000515BI0100001158 | 450 | kg |
| 47 | 3.011 | od344521/2019_2020 : Engaging labour including all charges | BI01010001010000000000000515BI0100001159 | 2 | each |
| 48 | 3.012 | od344527/2019_2020 : Engaging fitter/plumber for repairing works including all charges. | BI01010001010000000000000515BI0100001160 | 2 | no |
| 49 | 3.013 | od344530/2019_2020 : 15mm Short body tap | BI01010001010000000000000515BI0100001161 | 1 | no |
| 50 | 3.014 | 14.66.1 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface | BI01010001010000000000000515BI0100001162 | 237.57 | sqm |
| 51 | 3.015 | 16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | BI01010001010000000000000515BI0100001163 | 15.4 | sqm |
| 52 | 3.016 | 21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001164 | 6.591 | kg |
| 53 | 3.017 | 21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) | BI01010001010000000000000515BI0100001165 | 5.705 | kg |
| 54 | 3.018 | 21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness | BI01010001010000000000000515BI0100001166 | 2.535 | sqm |
| 55 | 4 | Anganavadi No.27 Ward-1 | BI01010001010000000000000515BI0100001167 | ||
| 56 | 4.001 | 11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. | BI01010001010000000000000515BI0100001168 | 4 | sqm |
| 57 | 4.002 | 5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform | BI01010001010000000000000515BI0100001169 | 3.409 | sqm |
| 58 | 4.003 | 4.1.2 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size) | BI01010001010000000000000515BI0100001170 | 0.217 | cum |
| 59 | 4.004 | 5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | BI01010001010000000000000515BI0100001171 | 16.201 | kilogram |
| 60 | 4.005 | 11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm. | BI01010001010000000000000515BI0100001172 | 3.25 | sqm |
| 61 | 4.006 | 17.7.3 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps | BI01010001010000000000000515BI0100001173 | 1 | each |
| 62 | 4.007 | 17.10.1.2 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x 1040 mm bowl depth 225 mm | BI01010001010000000000000515BI0100001174 | 1 | each |
| 63 | 4.008 | 50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | BI01010001010000000000000515BI0100001175 | 0.408 | cum |
| 64 | 4.009 | 50.18.7.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001176 | 30 | metre |
| 65 | 4.01 | 50.18.7.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall | BI01010001010000000000000515BI0100001177 | 20 | metre |
| 66 | 4.011 | 50.18.7.6.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10 Kfg/cm - Internal work- Exposed on wall | BI01010001010000000000000515BI0100001178 | 20 | metre |
| 67 | 4.012 | od345662/2019_2020 : Engaging coolie forcleaning inside the building and surroundings. | BI01010001010000000000000515BI0100001179 | 5 | no |
| 68 | 4.013 | od345712/2019_2020 : Engaging Fitter/Plumber for repairing works | BI01010001010000000000000515BI0100001180 | 3 | each |
| 69 | 4.014 | od344530/2019_2020 : 15mm Short body tap | BI01010001010000000000000515BI0100001181 | 1 | no |
| 70 | 4.015 | od345720/2019_2020 : Supplying and fixing 150mm dia PVC half cut section with brackets at the end of sheet or tiled roof for rain water collection including all cost and materials, conveyance, labour charges etc. complete.<br> | BI01010001010000000000000515BI0100001182 | 5 | metre |
| 71 | 4.016 | 50.18.9.7.1 : Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2 | BI01010001010000000000000515BI0100001183 | 18 | metre |
| 72 | 4.017 | 9.48.2 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc | BI01010001010000000000000515BI0100001184 | 784.082 | kg |
| 73 | 4.018 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001185 | 39.72 | sqm |
| 74 | 4.019 | 11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm | BI01010001010000000000000515BI0100001186 | 37.6 | sqm |
| 75 | 4.02 | 18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. | BI01010001010000000000000515BI0100001187 | 500 | Litre |
| 76 | 4.021 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001188 | 7.76 | sqm |
| 77 | 4.022 | od346681/2019_2020 : White cement washing one coat including all labour, material,conveyance charge etc complete | BI01010001010000000000000515BI0100001189 | 7.76 | sqm |
| 78 | 4.023 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001190 | 1 | cum |
| 79 | 4.024 | od345985/2019_2020 : Supplying and fixing readymade ferrocement waste pit including conveyance,fitting etc.complete. | BI01010001010000000000000515BI0100001191 | 1 | each |
| 80 | 4.025 | 10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | BI01010001010000000000000515BI0100001192 | 53.5 | kg |
| 81 | 4.026 | od344065/2019_2020 : Roofing with GI hard colour powder coated traffold sheets 0.35mm thick or nearest available thickness with overlaps of 150mm at ends and GI hook or crank C.I. bolts and nuts including plain washers and bitumin washers etc complete. | BI01010001010000000000000515BI0100001193 | 11.75 | sqm |
| 82 | 5 | Anganavadino.44 (Ward-10) | BI01010001010000000000000515BI0100001194 | ||
| 83 | 5.001 | 10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) | BI01010001010000000000000515BI0100001195 | 103 | kg |
| 84 | 5.002 | 2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | BI01010001010000000000000515BI0100001196 | 0.324 | cum |
| 85 | 5.003 | 60.7.1 : DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site | BI01010001010000000000000515BI0100001197 | 0.324 | cum |
| 86 | 5.004 | 50.6.2.1 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete | BI01010001010000000000000515BI0100001198 | 0.729 | cum |
| 87 | 5.005 | 13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | BI01010001010000000000000515BI0100001199 | 6.885 | sqm |
| 88 | 5.006 | od346681/2019_2020 : White cement washing one coat including all labour, material,conveyance charge etc complete | BI01010001010000000000000515BI0100001200 | 174.735 | sqm |
| 89 | 5.007 | 13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) | BI01010001010000000000000515BI0100001201 | 174.735 | sqm |
| 90 | 5.008 | 10.16.2 : Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes | BI01010001010000000000000515BI0100001202 | 90 | kg |
| 91 | 5.009 | 13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | BI01010001010000000000000515BI0100001203 | 16.65 | sqm |
| 92 | 5.01 | od345712/2019_2020 : Engaging Fitter/Plumber for repairing works | BI01010001010000000000000515BI0100001204 | 2 | each |
| 93 | 5.011 | od344521/2019_2020 : Engaging labour including all charges | BI01010001010000000000000515BI0100001205 | 1 | each |
| 94 | Total in Figures |
AI Tender Summary
Tender Timeline
Nov 08, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender