Construction Of Anganwadi No . 118 At Pardi Tq . Achalpur
Tender Value
7.53 Lakhs
Estimated cost
Bid Submission
21 Nov 2019
0 days left
EMD
8000
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
ACHALPUR → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi No . 118 At Pardi Tq . Achalpur
BOQ
| Name of Work: O/W Construction of Anganwadi No.118 at Pardi Tq.Achalpur | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means\n(SSR 18-19 Item No.21.02) Bd.A.1 Page No. 259 | BI01010001010000000000000515BI0100001113 | 20.12 | Cum |
| 2 | 2 | Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means\n(SSR 18-19 Item No.21.04) Bd.A.1 Page No. 259 | BI01010001010000000000000515BI0100001114 | 7.22 | Cum |
| 3 | 3 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.\n(SSR 18-19 Item No.21.40) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001115 | 4.15 | Cum |
| 4 | 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.01) Bd. E. 1 Page No. 287 | BI01010001010000000000000515BI0100001116 | 6.66 | Cum |
| 5 | 5 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.11) Bd.F.3 Page No. 298 and B.7, Page No.38 | BI01010001010000000000000515BI0100001117 | 2.4 | Cum |
| 6 | 6 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.\n(SSR 18-19 Item No.21.37) Bd.A.11 Page No. 263 | BI01010001010000000000000515BI0100001118 | 39.45 | Cum |
| 7 | 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.31) Bd.F.5 Page No. 300 and B.7, Page.No. 38 | BI01010001010000000000000515BI0100001119 | 2.58 | Cum |
| 8 | 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\n(SSR 18-19 Item No.25.50) Bd.F.6 Page No. 300 and B.7, Page No.38 | BI01010001010000000000000515BI0100001120 | 6.29 | Cum |
| 9 | 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.70) Bd.F.8 Page No. 302 and B.7, Page No.38 | BI01010001010000000000000515BI0100001121 | 5.65 | Cum |
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.26.05) Bd.F.9 Page No.303 and B.7, Page No.38 | BI01010001010000000000000515BI0100001122 | 0.7 | Cum |
| 11 | 11 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.\n(SSR 18-19 Item No.26.33) Bd.F.17, Page No. 306 | BI01010001010000000000000515BI0100001123 | 1.1387 | MT |
| 12 | 12 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.\n(SSR 18-19 Item No.27.01) Bd.G. 1 Page No.313 | BI01010001010000000000000515BI0100001125 | 4.71 | Cum |
| 13 | 13 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.16) Bd.E. 3/Page No. 288/I.S. 456 (2000) | BI01010001010000000000000515BI0100001126 | 0.65 | Cum |
| 14 | 14 | Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm .\n(SSR 18-19 Item No.39.56) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001127 | 10.1 | Rmt |
| 15 | 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete\n(SSR 18-19 Item No.27.05) Bd.G.5 Page No. 315 | BI01010001010000000000000515BI0100001128 | 16.44 | Cum |
| 16 | 16 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete.\n(SSR 18-19 Item No.27.06) Bd.G.7 Page No. 316 | BI01010001010000000000000515BI0100001129 | 8.88 | Sqm |
| 17 | 17 | Providing and fixing in position Mild steel fixed staggered ( Z Type ) Ventilator as per detailed drawing with hot deep zink coating including fabricating with Mild steel 'Z 'Section of size 20mm x 25 mm and 3 mm thick at weight 1.42 Kg/Rmt,with stainless steel mosquito net of 304 Grade,4 mm thick float glass ?as directed by Engineer In charge including necessary welding, grinding, two coats of oil paint\netc.complete\n(SSR 18-19 Item No.39.77) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001130 | 0.54 | Sqm |
| 18 | 18 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.\n(SSR 18-19 Item No.32.04) Bd. L.2 Page No. 368 | BI01010001010000000000000515BI0100001131 | 104.9 | Sqm |
| 19 | 19 | Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.\n(SSR 18-19 Item No.32.01) Bd. L.1 Page No. 367 | BI01010001010000000000000515BI0100001132 | 33.95 | Sqm |
| 20 | 20 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete.\n(SSR 18-19 Item No.32.07) Bd.L.4 Page No. 368 | BI01010001010000000000000515BI0100001133 | 138.18 | Sqm |
| 21 | 21 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.\n(SSR 18-19 Item No.35.21) As directed by Engineerin charge.\nProviding and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.\n(SSR 18-19 Item No.36.11) Bd.P.5 Page No. 413 | BI01010001010000000000000515BI0100001134 | 138.85 | Sqm |
| 22 | 22 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.\n(SSR 18-19 Item No.35.13) Bd.0.8 Page No. 406 | BI01010001010000000000000515BI0100001135 | 138.18 | Sqm |
| 23 | 23 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge \n(SSR 18-19 Item No.6.36) MORTH 801 | BI01010001010000000000000515BI0100001136 | 1 | No |
| 24 | 24 | Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.)\n(SSR 18-19 Item No.39.20) BD-T-53 Page No. 509 | BI01010001010000000000000515BI0100001137 | 6.48 | Sqm |
| 25 | 25 | Finishing the terrece slab integrally mixed with water proofing compound in C.M. 1:3 with 12 mm thick layer including curing, finishing,using waterproofing compound as approved by Engineer-in-charge at the rate of 1 kg per bag of cement etc. complete.(Note : Item not to be used as waterproofing treatment over terreces.)\n(NEW CSR item No.14, Page No.29)\nAs directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001138 | 47.18 | Sqm |
| 26 | 26 | Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)\n(SSR 18-19 Item No.43.18) Specfications | BI01010001010000000000000515BI0100001139 | 1 | No |
| 27 | 27 | Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete.\n(SSR 18-19 Item No.42.33) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001140 | 1 | No |
| 28 | 28 | Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.\n(SSR 18-19 Item No.42.19) Bd.V.46, Page No. 576 | BI01010001010000000000000515BI0100001141 | 1 | No |
| 29 | 29 | Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete\n(SSR 18-19 Item No.42.51) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001142 | 1 | Rmt |
| 30 | 30 | Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.\n(SSR 18-19 Item No.42.52) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001143 | 1 | Rmt |
| 31 | 31 | Providing and laying cement concrete flooring 40mm thick with M20 cement concrete laid to proper level and slope in alternate bays, including compaction, filling joints, marking lines to give appearance of tiles of 30cm x 30cm or other size laid diagonally/square etc. finishing smooth (with extra cement) in any colour as directed and Curing etc. complete. With Crushed Sand\n(SSR 18-19 Item No.33.12) Bd.M.6 Page No. 381 | BI01010001010000000000000515BI0100001144 | 46.2 | Sqm |
| 32 | 32 | Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.\n(SSR 18-19 Item No.42.55) BD.V 5 page 551 and as directed by Engineer in charge | BI01010001010000000000000515BI0100001145 | 3 | Rmt |
| 33 | 33 | Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.\n(SSR 18-19 Item No.42.56) BD.V 5 page 551 and as directed by Engineer in charge | BI01010001010000000000000515BI0100001146 | 3 | Rmt |
| 34 | 34 | Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters\n(SSR 18-19 Item No.42.53) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001147 | 500 | Litre |
| 35 | 35 | Providing and fixing 15 mm diameter PVC Aqua kraft type Supreme make or equivalent make super bib tap with flange including all accessories etc complete\n(SSR 18-19 Item No.43.33) As Directected By Engineer Incharge | BI01010001010000000000000515BI0100001148 | 1 | No |
| 36 | 36 | Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.\n(SSR 18-19 Item No.33.24) Bd.M.12 Page No. 385 | BI01010001010000000000000515BI0100001149 | 3.15 | Sqm |
| 37 | 37 | Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.\n(SSR 18-19 Item No.33.25) Bd.M.13 Page No. 386 | BI01010001010000000000000515BI0100001150 | 1.93 | Sqm |
| 38 | 38 | Providing and fixing factory made solid core flush door shutters in double leaves 35mm thick,decorative type of exterior grade, as per detailed drawings, conforming to I.S.: 2202 – 1966 (Revised) including approved face veneers on both sides, without glazing and venetians including mat finish stainless steel fixtures and fastening, stoppers and finishing with french polishing etc. (Excluding door frame)(Sample to be got approved from Ex. Engineer before use) \nCommercial Hard Wood shutter\n (NEW CSR item No.5, Page No.) Bd.T.35/page No.500 | BI01010001010000000000000515BI0100001151 | 1.7 | Sqm |
| 39 | 39 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring\n(SSR 18-19 Item No.33.40) Bd.M. 12 Page No.385 | BI01010001010000000000000515BI0100001152 | 30.8 | Sqm |
| 40 | 40 | Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete.b) Skirting\n(SSR 18-19 Item No.33.41) Bd.M. 12 Page No.385 | BI01010001010000000000000515BI0100001153 | 2 | Sqm |
| 41 | 41 | Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.\n(SSR 18-19 Item No.33.23) Bd.M.29 Page No. 391 | BI01010001010000000000000515BI0100001154 | 4.31 | Sqm |
| 42 | 42 | Providing and fixing FRP (Fiber reinforced Plastic) Door with shutter 25 to 30 mm. Thick having properties such as water proof resistantto termite resistant to mild acids and chemical. The thickness of FRP shold of 1.5 mm. With extra reinforcement to sides, edges, recess for alluminium fixtures and fastenings and commercial types as per the approved design including alluminium, fixtures and fastenings and two coats of synthetic acrylic emulsion paint etc. complete.( Excluding door frame) (for W.C. and bath doors)\n(NEW CSR item No.9, Page No.) As directed by Engineer- in-charge. | BI01010001010000000000000515BI0100001155 | 1.6 | Sqm |
| 43 | 43 | Providing patti/ band 150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.\n(SSR 18-19 Item No.32.25) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001156 | 26 | Rmt |
| 44 | 44 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)\n(SSR 18-19 Item No.33.53) Bd. M-12 page No. 385 | BI01010001010000000000000515BI0100001157 | 0.6 | Sqm |
| 45 | 45 | CEMENT\nStandard Consistancy, Fineness, Specific Gravity, Initial Setting Time, Final Setting Time. Compressive Strength, Soundness by Lechatelier Apparatus | BI01010001010000000000000515BI0100001158 | 1 | No |
| 46 | 46 | Bricks\nWater Absorption (Set of 5 Bricks), Compressive Strength (Set of 5 Bricks), Efflorescence ((Set of 5 Bricks) | BI01010001010000000000000515BI0100001159 | 1 | No |
| 47 | 47 | Concrete\nOne Test For R.C.C. Footing | BI01010001010000000000000515BI0100001160 | 1 | No |
| 48 | 48 | One Test For R.C.C. Column | BI01010001010000000000000515BI0100001161 | 1 | No |
| 49 | 49 | One Test For R.C.C. Beam | BI01010001010000000000000515BI0100001162 | 1 | No |
| 50 | 50 | One Test For R.C.C. Slab | BI01010001010000000000000515BI0100001163 | 1 | No |
| 51 | 51 | One Test For R.C.C. Chajaa | BI01010001010000000000000515BI0100001164 | 1 | No |
| 52 | 52 | Sand\nFineness Modulus (Sieve Analysis), Silt and Clay Content | BI01010001010000000000000515BI0100001165 | 1 | No |
| 53 | 53 | Royalty Charges | BI01010001010000000000000515BI0100001166 | 72.9 | Cum |
AI Tender Summary
Tender Timeline
Nov 07, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender