Beautification To Vittal Rukhmai Mandir At Riddhapur Tq . Morshi
Tender Value
4.41 Lakhs
Estimated cost
Bid Submission
21 Nov 2019
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
560
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
MORSHI → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Beautification To Vittal Rukhmai Mandir At Riddhapur Tq . Morshi
BOQ
| Name of Work: Beautification to Vittal Rukhmai Mandir at Riddhapur Tq.Morshi | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means\n(SSR 18-19 Item No.21.02) Bd.A.1 Page No. 259 | BI01010001010000000000000515BI0100001113 | 15.5541 | Cum |
| 2 | 2 | Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete.\n(SSR 18-19 Item No.21.40) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001114 | 25.3934 | Cum |
| 3 | 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.01) Bd. E. 1 Page No. 287 | BI01010001010000000000000515BI0100001115 | 1.94409 | Cum |
| 4 | 4 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.11) Bd.F.3 Page No. 298 and B.7, Page No.38 | BI01010001010000000000000515BI0100001116 | 2.69998 | Cum |
| 5 | 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.25.31) Bd.F.5 Page No. 300 and B.7, Page.No. 38 | BI01010001010000000000000515BI0100001117 | 1.92507 | Cum |
| 6 | 6 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)\n(SSR 18-19 Item No.25.50) Bd.F.6 Page No. 300 and B.7, Page No.38 | BI01010001010000000000000515BI0100001118 | 1.32482 | Cum |
| 7 | 7 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.\n(SSR 18-19 Item No.26.33) Bd.F.17, Page No. 306 | BI01010001010000000000000515BI0100001119 | 0.12309 | MT |
| 8 | 8 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.\n(SSR 18-19 Item No.21.37) Bd.A.11 Page No. 263 | BI01010001010000000000000515BI0100001120 | 14.1412 | Cum |
| 9 | 9 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete\n(SSR 18-19 Item No.27.05) Bd.G.5 Page No. 315 | BI01010001010000000000000515BI0100001121 | 6.43997 | Cum |
| 10 | 10 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) \n(SSR 18-19 Item No.24.16) Bd.E. 3/Page No. 288/I.S. 456 (2000) | BI01010001010000000000000515BI0100001122 | 0.441593 | Cum |
| 11 | 11 | Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt.\n(SSR 18-19 Item No.44.10) Bd.W.6 Page No.585 | BI01010001010000000000000515BI0100001123 | 4.50021 | Sqm |
| 12 | 12 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.\n(SSR 18-19 Item No.32.03) Bd. L.2 Page No. 368 | BI01010001010000000000000515BI0100001125 | 38.5048 | Sqm |
| 13 | 13 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete\n(SSR 18-19 Item No.32.06) Bd.L.4 Page No. 368 | BI01010001010000000000000515BI0100001126 | 31.56 | Sqm |
| 14 | 14 | Providing cement patta / band of 2.50 cm width on either side of edges of plaster for doors and windows including scaffolding ,finishing, curing etc. complete.\n(SSR 18-19 Item No.32.36) As directed by Engineer in charge. | BI01010001010000000000000515BI0100001127 | 25 | Sqm |
| 15 | 15 | Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaning etc. complete. (using 100% crushed sand)\n(SSR 18-19 Item No.33.53) Bd. M-12 page No. 385 | BI01010001010000000000000515BI0100001128 | 182.188 | Sqm |
| 16 | 16 | Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.\n(SSR 18-19 Item No.35.15) Spec.No.: Bd.O.8/Page No.406 | BI01010001010000000000000515BI0100001129 | 160.291 | Sqm |
| 17 | 17 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete.\n(SSR 18-19 Item No.2.29a) | BI01010001010000000000000515BI0100001130 | 48.0868 | Cum |
| 18 | 18 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete\n(SSR 18-19 Item No.2.30) | BI01010001010000000000000515BI0100001131 | 48.085 | Cum |
| 19 | 19 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.\n(SSR 18-19 Item No.40.01) Bd.U.1 Page No. 537 | BI01010001010000000000000515BI0100001132 | 13.7997 | Sqm |
| 20 | 20 | Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge \n(SSR 18-19 Item No.6.36) MORTH 801 | BI01010001010000000000000515BI0100001133 | 1 | No |
| 21 | 21 | CEMENT\nStandard Consistancy, Fineness, Specific Gravity, Initial Setting Time, Final Setting Time. Compressive Strength, Soundness by Lechatelier Apparatus | BI01010001010000000000000515BI0100001134 | 1 | No |
| 22 | 22 | 80 mm Metal \nWater Absorption, Specific Gravity, Impact Value Crushing Value | BI01010001010000000000000515BI0100001135 | 1 | No |
| 23 | 23 | Sand\nFineness Modulus (Sieve Analysis), Silt and Clay Content | BI01010001010000000000000515BI0100001136 | 1 | No |
| 24 | 24 | Murum\nLiquid limit & plastic limit | BI01010001010000000000000515BI0100001137 | 1 | No |
| 25 | 25 | Steel\nTensile Strength, Elongation, Yield Stress, Weight Per Meter, Bend / Rebend Test, Proof Stress | BI01010001010000000000000515BI0100001138 | 1 | No |
| 26 | 26 | Concrete \nCrushing Strength C.C. Cube M-10 | BI01010001010000000000000515BI0100001139 | 1 | No |
| 27 | 27 | Compressive Strength C.C. Cube M-20 For Footing | BI01010001010000000000000515BI0100001140 | 1 | No |
| 28 | 28 | Compressive Strength C.C. Cube M-20 For Column | BI01010001010000000000000515BI0100001141 | 1 | No |
| 29 | 29 | Compressive Strength C.C. Cube M-20 For Beam | BI01010001010000000000000515BI0100001142 | 1 | No |
| 30 | 30 | Paving Block\nCompressive Strength Water Absorption | BI01010001010000000000000515BI0100001143 | 1 | No |
| 31 | 31 | Royalty Charges | BI01010001010000000000000515BI0100001144 | 88.6 | Cum |
AI Tender Summary
Tender Timeline
Nov 07, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 21, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 22, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender