| 1 | 1 | B&R Works\nSurface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed. | | 68 | SQM |
|---|
| 2 | 2 | Rough excavation not exceeding 1.5 m deep and getting out in hard/dense soil complete all as specified and directed. | | 2 | CUM |
|---|
| 3 | 3 | Excavation in over area nexc 1.5 metre deep and getting out in hard/dense soil complete all as specified and directed. | | 70 | CUM |
|---|
| 4 | 4 | Excavation in over area exc 1.5 metre but n exc 3.00 metre deep and getting out in hard/dense soil complete all as specified and directed. | | 35 | CUM |
|---|
| 5 | 5 | Excavation in over area exc 3.00 metre but nexc 4.50 metre deep and getting out in hard/dense soil complete all as specified and directed. | | 10 | CUM |
|---|
| 6 | 6 | Excavating in trenches not exc 1.5m wide and n.exc 1.5 m in depth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and not exceeding 1.5m in depth and getting out in hard/dense soil complete all as specified and directed. | | 80 | CUM |
|---|
| 7 | 7 | Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. | | 57 | CUM |
|---|
| 8 | 8 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. | | 127 | CUM |
|---|
| 9 | 9 | M&L Plain cement concrete (1:4:8) type D-2, using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. | | 10.2 | CUM |
|---|
| 10 | 10 | M&L for Walling of random rubble uncoursed, well bonded bedded and solidly hearted built in CM 1:6 (below ground level) complete all as specified as directed. | | 18 | CUM |
|---|
| 11 | 11 | Materials and Labour for loose filling with broken stone aggt of gauge 80 to 150 mm size in soakage pits/soak wells or any other place including spreading and leveling complete all as specified and directed. | | 41 | CUM |
|---|
| 12 | 12 | M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layers n exe 15cm thick, watered and rammed to a true surface complete all as specified and directed. | | 1.7 | CUM |
|---|
| 13 | 13 | M&L plain cement concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain including necessary formwork complete all as specified and as directed. | | 3.3 | CUM |
|---|
| 14 | 14 | M&L plain cement concrete (1:2:4) type B-1, using 20mm graded crushed stone aggregate as in coping including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed. | | 1.5 | CUM |
|---|
| 15 | 15 | M&L 75mm PCC type D2, 1:4:8 ( 40mm graded stone aggr) as in sub base of floor complete all as specified as directed. | | 5 | SQM |
|---|
| 16 | 16 | M&L for precast cement concrete block masonry 1:3:6 type C1 (using 20mm graded stone aggr) 10 cm thick set in CM 1:4 complete all as specified and directed. | | 30 | SQM |
|---|
| 17 | 17 | Materials and Labour for precast cement concrete block masonry (1:3:6) type C1 using 20 mm graded stone aggt with solid blocks, exc 10 cm in width, set in cement morter (1:6) in wall complete all as specified and directed. | | 40.5 | CUM |
|---|
| 18 | 18 | Materials and Labour for reinforced cement concrete (1:2:4) type B1(nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc; basement slabs under-reamed pillars and mass concrete complete all as specified and directed.\n(Note: Steel reinforcement shall be measured & paid separately)\n | | 1.2 | CUM |
|---|
| 19 | 19 | Materials and Labour for reinforced cement concrete (1:2:4) type B1(nominal mix) using 20 mm graded stone aggregate as in wall, retaining wall and the like, any thickness, above top of footings, including attached pilasters and buttresses complete all as specified and directed.\n(Note: Steel reinforcement shall be measured & paid separately)\n | | 0.4 | CUM |
|---|
| 20 | 20 | Materials and Labour for reinforced cement concrete (1:2:4) type B1(nominal mix) using 20 mm graded stone aggregate as in column, pillars, piers, post and struts complete all as specified and directed.\n(Note: Steel reinforcement shall be measured & paid separately)\n | | 0.9 | CUM |
|---|
| 21 | 21 | M&L for reinforced cement concrete (1:2:4) type B1 (nominal mix) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels complete all as specified and directed.\n(Note: Steel reinforcement shall be measured & paid separately)\n | | 3.5 | CUM |
|---|
| 22 | 22 | Materials and Labour for reinforced cement concrete (1:2:4) type B1(nominal mix) using 20 mm graded stone aggregate as in slab and shelves supported on wall, beams and columns in floors, roofs and landings etc complete all as specified and directed. \n(Note: Steel reinforcement shall be measured & paid separately) | | 2.5 | CUM |
|---|
| 23 | 23 | Materials and Labour for Precast cement concrete (1:2:4) type B-1, using 20 mm graded crushed stone aggregate as in manhole/drain cover slabs etc including necessary form work and set in cement mortar 1 : 4 complete all as specified and directed.\n(Note: Steel reinforcement shall be measured & paid separately) | | 3.6 | CUM |
|---|
| 24 | 24 | Materials and labour for formwork to sides of concrete foundation, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.\n | | 7 | SQM |
|---|
| 25 | 25 | Materials and labour for formwork to faces of walls, retaining walls, abutments, parapets and stair case railing and similar work including attached pilaster, buttresses etc; vertical or to batter, curved faced with fair finished surfaces of concrete complete all as specified and directed.\n | | 10.5 | SQM |
|---|
| 26 | 26 | Materials and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed\n | | 25 | SQM |
|---|
| 27 | 27 | Materials and labour for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for rough finished flat surfaces of concrete complete all as specified and directed\n | | 43 | SQM |
|---|
| 28 | 28 | Materials and labour for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work, not exceeding 200 mm thickness (horizontal or sloping) with rough finished surfaces of concrete complete all as specified and directed.\n | | 26 | SQM |
|---|
| 29 | 29 | M&L TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. | | 617 | KG |
|---|
| 30 | 30 | M&L TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. | | 262 | KG |
|---|
| 31 | 31 | M&L TMT bars 08 mm dia, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spi-rally hooping for columns, hook-ing ends and binding with and including mild steel wire (an-nealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. | | 65 | KG |
|---|
| 32 | 32 | M&L mild steel round bars 10 mm dia and over, cut to length, bent to shape re-quired including cranking, bending, spirally hooping ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia as rungs/handle for manholes cover complete all as specified and directed. | | 4 | KG |
|---|
| 33 | 33 | Supply and fix second-class hard wood timber scantlings, wrought timber framed and fixed in any position with nails complete all as specified and directed. | | 0.08 | CUM |
|---|
| 34 | 34 | S&F Second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed | | 0.15 | CUM |
|---|
| 35 | 35 | S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed. | | 0.6 | SQM |
|---|
| 36 | 36 | S&F Plain framed, panelled shutter 30 mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed. | | 4.5 | SQM |
|---|
| 37 | 37 | S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed. | | 9 | EACH |
|---|
| 38 | 38 | S&F Aluminium anodised barrel tower bolts 150 mm of extruded section and fixed complete all as specified and directed. | | 3 | EACH |
|---|
| 39 | 39 | S&F 150 mm long aluminium handles cast type anodised complete all as specified and directed. | | 6 | EACH |
|---|
| 40 | 40 | S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. | | 3 | EACH |
|---|
| 41 | 41 | S&F 75 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed. | | 6 | EACH |
|---|
| 42 | 42 | S&F Aluminium anodised barrel tower bolts 125 mm of extruded section and fixed complete all as specified and directed. | | 3 | EACH |
|---|
| 43 | 43 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. | | 3 | EACH |
|---|
| 44 | 44 | M&L 4mm thick shet glass, ordinary quality and glazing with oil puty in square n exc 0.5 sqm in each pane complete all as specified and directed. | | 0.6 | SQM |
|---|
| 45 | 45 | M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer complete all as specified and directed. | | 4 | SQM |
|---|
| 46 | 46 | M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers complete all as specified and directed. | | 4 | SQM |
|---|
| 47 | 47 | M&L non-skid ceremic tiles 7 to 8 mm thick (square / rectangular) area of each tile exc 0.11sqm but n.exc 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. | | 4 | SQM |
|---|
| 48 | 48 | M&L rendering 10 mm thick on fair faces of brick/concrete work CM 1:4 rough finished complete all as specified and directed. | | 65 | SQM |
|---|
| 49 | 49 | M&L for cloured glazed ceramic tiles in vertical surface 300 x 200 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. | | 15 | SQM |
|---|
| 50 | 50 | M&L for rendering 15 mm thick plaster on fair faces of block/concrete surfaces in CM (1:6) on wall surface, finished even and smooth without using extra cement complete all as specified and directed. | | 169 | SQM |
|---|
| 51 | 51 | Rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound @ 3% by weight of cement or as per manufacturer’s instructions, finished fair and even without using extra cement complete all as specified and directed.\n(Note : WPC shall be measured & paid separately)\n | | 95 | SQM |
|---|
| 52 | 52 | Supply only integral water proofing compound ISI Mark of approved make complete all as specified and directed. | | 13 | KG |
|---|
| 53 | 53 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed. | | 11 | SQM |
|---|
| 54 | 54 | M&L for three coats of white washing on new plaster wall surface over primer including preparation of plastered surfaces complete all as specified and directed. | | 20 | SQM |
|---|
| 55 | 55 | M & L preparation of new surface & applying two coats of cement based paints over a coat of cement primer on wall complete all as specified and directed. | | 149 | SQM |
|---|
| 56 | 56 | M&L for for preparation of new wooden surfaces of any description exc 10cm width or girth and applying two coat of synthetic over a coat of pink primer complete all as specified and directed. | | 6 | SQM |
|---|
| 57 | 57 | M&L for 75mm thick PCC 1:3:6 type C2 40mm graded aggregate as in plinth protection, finishing the surfaces even and smooth without using extra cement complete all as specified and directed. | | 10 | SQM |
|---|
| 58 | 58 | S & F vitreous china urinal, half stall type, white including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plug with and incl 60 mm long brass screw, pointing around urinal back in cement, fixing flush pipe, grationg and union of dischage pipe.including provn of concrete bedding and connection to trap and flushing pipe antisyphonage pipe etc comple incl making good to floor complete all as specified and directed. | | 1 | EACH |
|---|
| 59 | 59 | M&L viterous china WHB, white flat back size 580x450mm exc taps, waste, chain and plug and porcelein stopper but including cutting for aned pinning in ends of brackets or erecting stand complete all as specified and directed. | | 1 | EACH |
|---|
| 60 | 60 | M&L waste cuplings 32mm dia (half or full threads). (minimum weght 32 mm-45grms/40mm- 60grms) complete all as specified and directed. | | 1 | EACH |
|---|
| 61 | 61 | S&F pillar taps 15mm bore dia, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Coldwith long shanks and fly nuts,screwed for iron pipe and fixed complete all as specified and directed. | | 1 | EACH |
|---|
| 62 | 62 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. | | 1 | EACH |
|---|
| 63 | 63 | S&F brass chromium plated shower rose 125mm size complete all as specified and directed. | | 2 | EACH |
|---|
| 64 | 64 | S&F soap dish, viterous china white, appx size 160x160x90mm complete all as specified and directed. | | 2 | EACH |
|---|
| 65 | 65 | S&F tower rail 450mm long of PTMT fixed with and including chromium plated brass screws and wodden/plastic cleats(minimum weght 190grms) complete all as specified and directed. | | 2 | EACH |
|---|
| 66 | 66 | S&F stop cock fancy type 15mm dia CP high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. | | 7 | EACH |
|---|
| 67 | 67 | S&F bib tap, fancy type, chromium plated, ISI marked, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore and fixed, (weight of one bib tap shall not less than 400 gm each) complete all as specified and directed. | | 4 | EACH |
|---|
| 68 | 68 | S&F CP grating round 140 mm size of PTMT (min weight 50 gms ) complete all as specified and directed. | | 3 | EACH |
|---|
| 69 | 69 | S&F 20mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor complete all as specified and directed. | | 52 | RM |
|---|
| 70 | 70 | S&F 25mm outer dia 3-layer PP-R poly propylene random copolymer pipes SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including PPR plain & brass threaded polypropylene random fitting fixed complete to walls, ceilings or laid in floor complete all as specified and directed. | | 17 | RM |
|---|
| 71 | 71 | S&F rotatiional moulded polyetylene water storage tanks 500 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm brass float valve & necessary fittings complete all as specified and directed. | | 1 | EACH |
|---|
| 72 | 72 | S&F rotatiional moulded polyetylene water storage tanks 300 ltr capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20mm brass float valve & necessary fittings complete all as specified and directed. | | 1 | EACH |
|---|
| 73 | 73 | S&F PVC ( SWR) pipe 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed. | | 145 | RM |
|---|
| 74 | 74 | S&F PVC ( SWR) pipe 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or floor complete all as specified and directed. | | 22 | RM |
|---|
| 75 | 75 | M&L PVC (SWR) floor trap with grating including jointing withsolvent cement of 75mm dia complete all as specified and directed. | | 4 | EACH |
|---|
| 76 | 76 | Supply and fix 110mm bore (SWR) bends or single T (Equal or unequal) any radius with acess doore, complete all as specified and directed | | 5 | EACH |
|---|
| 77 | 77 | Supply and fix 110mm bore (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed. | | 1 | EACH |
|---|
| 78 | 78 | Material and labour for plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 110 mm bore pipe complete all as specified and as directed. | | 125 | RM |
|---|
| 79 | 79 | Supply and fix 75 mm bore UPVC (SWR) vent cowl, complete all as specified and directed. | | 6 | EACH |
|---|
| 80 | 80 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses not exceeding 40mm depression complete all as specified and directed. | | 10 | SQM |
|---|
| 81 | 81 | M&L raised pointing to random or polygonal rubble, uncoursed or brought course masonry in cement Mortar 1:4 complete all as specified and as directed. | | 2 | 10 SQM |
|---|
| 82 | 82 | Materials and Labour for extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds etc complete all as specified and directed. | | 100 | RM |
|---|
| 83 | 83 | E&M Works\nM/L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with PVC boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity conductor complete all a specified and directed | | 6 | PER\nPOINT |
|---|
| 84 | 84 | Supply and fixing switch piano flush type single pole one way 5 Amp 240 volts all as specified and directed \n | | 6 | EACH |
|---|
| 85 | 85 | S&F for ceiliing rose three terminal surface type bakelite 65x50 mm all as specified and directed. | | 4 | EACH |
|---|
| 86 | 86 | Supply & fixing Surface and wall mounted LED batten up to1x22 watt extruded aluminium housing suitable for T8 Lamps with ultra bright LED tubelight (single side connection) 0f capacity 20 watt suitable for T8 fitting with G13 Lamp holder complete all as specified and directed. Make Havells Cat no REGALBATTENT8UPTO1x22WDSBSWH and PHOTONULTRA+1213T8SSTL20WLED865SPC & equivalent make specified. | | 4 | EACH |
|---|
| 87 | 87 | S&F Lamp LED 1x10Watts complete all as specified Make Havells Cat part No.LED Adore Lamp 10W B22 CDL Ball Lamp LHLDERUEML & equivalent make specified. | | 2 | EACH |
|---|
| 88 | 88 | S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for battern fittings complete all as specified and directed. | | 2 | EACH |
|---|
| 89 | 89 | S&F MCB distrubution board SPN 2 way single door, sheet steel,phosphatised,powder coated 240 V complete all as specified and directed. | | 1 | EACH |
|---|
| 90 | 90 | Supply and Fix MCB SPN 240V 40 Amps,10 KA complete all as specified and directed. | | 1 | EACH |
|---|
| 91 | 91 | Supply and fix 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor,of size 6 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circular complete all as specified and directed. | | 24 | RM |
|---|
| 92 | 92 | Supply and fix house service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends. M.S.hook and stay or guy complete all as specified and directed. | | 1 | EACH |
|---|
