Maintenance Of Bank Building And Compound Wall At Front Side Of Sreekrishna College
Tender Value
17.26 Lakhs
Estimated cost
Bid Submission
25 Nov 2019
0 days left
EMD
43500
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
GURUVAYUR → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Bank Building And Compound Wall At Front Side Of Sreekrishna College
BOQ
| Name of Work: MAINTENANCE OF BANK BUILDING AND COMPOUND WALL AT FRONT SIDE OF SREE KRISHNA COLLEGE | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | APPENDIX - A (MAINTENANCE OF BANK BUILDING) Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area\ncleared | 365 | m2 | |
| 2 | 2 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats,\narchitrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 6 | each | |
| 3 | 3 | Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats,\narchitrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below Of area beyond 3 sq. metres | 7 | each | |
| 4 | 4 | Demolishing brick work manually / by mechanical means including stacking of serviceable material and\ndisposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In\ncement mortar | 3 | m3 | |
| 5 | 5 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal\nof rubbish to the dumping ground within 50 metres lead. | 182 | m2 | |
| 6 | 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed\nand fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or\ndash fastener shall be paid for separately), using good quality Anjili wood /jack wood | 0.4 | m3 | |
| 7 | 7 | Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for\ndoors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside\ngrooves or rebates to be measured) paneling for paneled or paneled and glazed shutters 25 mm to 40\nmm thick using good quality Anjili/ Jack wood | 5 | m3 | |
| 8 | 8 | Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows,\n30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with\nnecessary screws, excluding paneling which will be paid for separately, all complete as per direction 0f\nEngineer in- charge. using Anjili/ Jack wood | 30 | m2 | |
| 9 | 9 | Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available\nsize confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and\nabove in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.5 | m3 | |
| 10 | 10 | Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers,\nAbutments, Posts and Struts | 12 | m2 | |
| 11 | 11 | Providing and laying up to floor five level reinforced cement concrete in kerbs, steps and the like\nexcluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse\nsand (Zone - III) : 3 graded stone aggregate 20 mm nominal size) | 1.3 | m3 | |
| 12 | 12 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 13 | m2 | |
| 13 | 13 | 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour\ncharges etc complete | 7 | m2 | |
| 14 | 14 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including\ncutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls\ncomplete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar\n1:4 ( 1 cement : fine sand) | 24 | m2 | |
| 15 | 15 | Water proof plastering with Cement Mortar 1:4 (1 cement : 4 fine sand) 12mm thick plaster finished with a\nfloating coat of neat cement mixed with water proofing compound of approved make @ 2kg/m2 of mix\nfloated hard and troweled smooth including all labour, material, conveyance charges etc complete. | 160 | m2 | |
| 16 | 16 | Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm\ncement plaster | 25 | m2 | |
| 17 | 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,\nGrey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including\npointing the joints with white cement and matching pigment etc., complete. | 245 | m2 | |
| 18 | 18 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the\nmanufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory,\nGrey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including\npointing the joints with white cement and matching pigment etc., complete | 9 | m2 | |
| 19 | 19 | Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be\nspecified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green,\nblack of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm\nthick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg\nper sqm, including pointing in white cement mixed with pigment of matching shade complete. | 20 | m2 | |
| 20 | 20 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up\nstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS :\n733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the\ngaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.\nAluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever\nrequired including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel\nscrews, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing,\npaneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium\n(minimum thickness of powder coating 50 micron) | 26 | kg | |
| 21 | 21 | \nFor shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making\nprovision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket\nrequired (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder\ncoating 50 micron) | 8 | kg | |
| 22 | 22 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood\nparticle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows\nshutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural\ndrawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination\non both sides | 42 | m2 | |
| 23 | 23 | Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or\nround bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by\nwelding | 164 | kg | |
| 24 | 24 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts\nand wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3\ncoarse sand : 6 graded stone aggregate 20 mm nominal size) | 20 | each | |
| 25 | 25 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty :Float\nglass panes of thickness 4 mm | 28 | m2 | |
| 26 | 26 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat\nand lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled\ndevice (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and\nmaking good the walls and floors wherever required:W.C. pan with ISI marked black solid plastic seat\nand lid | 2 | each | |
| 27 | 27 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste\nof standard pattern, including painting of fittings and brackets, cutting and making good the walls\nwherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm\nC.P.brasspillar taps | 3 | each | |
| 28 | 28 | Supplying and fixing 300 mm Aluminium aldrop | 8 | no | |
| 29 | 29 | Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC\n10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws\ncomplete:300x10 mm | 16 | no | |
| 30 | 30 | Providing and fixing iron hooks and eyes: 150 mm\nNet | 20 | no | |
| 31 | 31 | Providing and fixing iron hooks and eyes: 100 mm\n | 50 | no | |
| 32 | 32 | Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC\nsolvent cement-110 mm dia Door Elbow | 4 | no | |
| 33 | 33 | Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC\nsolvent cement - 110x110x110 mm dia Door tee | 4 | no | |
| 34 | 34 | Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc.\ncomplete as per the direction of engineer-in-charge | 2 | no | |
| 35 | 35 | Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This\nincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as\nper direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wall | 15 | m | |
| 36 | 36 | Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This\nincludes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as\nper direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall | 10 | m | |
| 37 | 37 | Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This\nincludes jointing of pipes with one step PVC solvent cement and testing of joints complete as per\ndirection of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall | 15 | m | |
| 38 | 38 | Providing and fixing G.I. pipes complete with G.I. fittings (Cost of fittings to be paid separately)\nExternal work - 80 mm nominal dia | 50 | m | |
| 39 | 39 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including\ncutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete | 1400 | kg | |
| 40 | 40 | Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying\na priming coat of approved steel primer, including welding and bolted with special shaped washers etc.\ncomplete | 700 | kg | |
| 41 | 41 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as\napproved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams\nper sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and\npolyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to\navoid scratches during transportation and should be supplied in single length upto 12 metre or as desired\nby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm)\nwith EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of\npurlins, rafters and trusses and including cutting to size and shape wherever required. | 200 | m2 | |
| 42 | 42 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total\ncoated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc\ncoating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both\nside of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws\ncomplete:Ridges plain (500-600 mm) | 20 | m | |
| 43 | 43 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even\nshade:Two or more coats on old work | 910 | m2 | |
| 44 | 44 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give\neven shade:Two or more coats on old work | 200 | m2 | |
| 45 | 45 | Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied\n@ 1.67 ltr/10 sqm) on existing cement paint surface | 670 | m2 | |
| 46 | 46 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade\nmade by block making machine with strong vibratory compaction, of approved size, design & shape, laid\nin required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregate,\nfilling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. | 130 | m2 | |
| 47 | 47 | Labour engaged for conveyance of materials and additional work at site | 6 | each | |
| 48 | 48 | Labour engaged for necessary plumbing works | 5 | each | |
| 49 | 49 | Labour engaged for necessary carpentary works | 6 | each | |
| 50 | 50 | APPENDIX - B (MAINTENANCE OF COMPOUND WALL AT FRONT SIDE) Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level,\nincluding leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate\n20 mm nominal size) at window sills, ceiling level and the like.Cement mortar 1:6 (1 cement : 6 coarse\nsand) | 4.5 | m3 | |
| 51 | 51 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available\nsize confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and\nabove in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. | 3.6 | m3 | |
| 52 | 52 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and\nshuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm\nnominal size) | 0.8 | m3 | |
| 53 | 53 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including\ncutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls\ncomplete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar\n1:4 ( 1 cement : fine sand) | 38 | m2 | |
| 54 | 54 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 42 | m2 | |
| 55 | 55 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth\nincluding necessary repairs to scratches etc. complete. | 135 | m2 | |
| 56 | 56 | Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied\n@ 1.67 ltr/10 sqm) on existing cement paint surface | 840 | m2 | |
| 57 | 57 | Finishing walls with textured exterior paint of required shade:Old work (Two or more coats on existing\ncement paint surface applied @ 3.28 ltr/10 sqm | 90 | m2 | |
| 58 | 58 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give\neven shade:One or more coats on old work | 105 | m2 |
AI Tender Summary
Tender Timeline
Nov 05, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 29, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender