Bundelkhand University has published Purchase Of Project Weather Station Equipment For Computer Science Engineering Department Purchase Of Project Weather Station Equipment For Computer Science Engineering Department. Submission Date for this Tender is 26-11-2019. Weather Stations Tenders in BIET Jhansi Uttar Pradesh. Bidders can get complete Tender details and download the document.
Name of Work: Weather Station | |||||
---|---|---|---|---|---|
Sl. No. | Item Description | Item Code / Make | Quantity | Units | |
1 | 1 | Weather Station Specification:- | |||
2 | 1.01 | Pyranometer: \nMeasuring range 0-1800 W/m2\nResolution 1 W/m2\nSpectral range 300-2800 nm\nSensitivity 10 µ V/(W/m2)\nAccuracy ± 5%\nTemperature Compensation range -20 to +40 °C\nStandad cable length 5 m\nCosine response ± 1% at 45 degrees ± 4% at 75 degrees\nPyranometer sensor should be thermopile based and not photo diode sensor.\nCapability to measure both global and diffuse radiation. | item1 | 2 | Nos |
3 | 1.02 | Anemometer : \nWind Speed-\ni. Measuring range 0-70 m/s\nii. Accuracy ± 0.1 m/s up to 10 m/s ± 1.1 over 10 m/s\niii. Starting Threshold 0.4 m/s\nWind Direction -\ni. Measuring range 0-360° Mechanical 0-359° Electrical\nii. Accuracy ± 4°\niii. Starting Threshold 0.5 m/s\n | item2 | 2 | Nos |
4 | 1.03 | Combined Temperature and humidity sensor :\nHumidity - \ni. Measuring range 0-100% RH\nii. Resolution 0.1% RH\niii. Sensor operating temperature -20 to +60 °C\nTemperature -\ni. Measuring range (-20 to +60 °C)\nii. Resolution 0.1 °C\niii. Accuracy ± 0.5 hPa | item3 | 2 | Nos |
5 | 1.04 | Pressure Sensor :\nBarometric Pressure -\ni. Measurement range 600-1100 hPa\nii. Resolution 0.1 hPa\niii. Accuracy ± 0.5 hPa | item4 | 2 | Nos |
6 | 1.05 | Data logging System : \nData logger compatible with above mentioned sensor along with software. | item5 | 2 | Nos |
7 | 1.06 | Accessories : \nAll accesssories for system installation/operation required must be included in the quote | item6 | 2 | Nos |
8 | 1.07 | Necessary features\ni. System should be factory calibration is required for the Unit or any spares/sensor then cost to be included in quotation. Certificates of compliance and Traceability.\nIi. Any optional equipment/accessory/spares advised to be included separately.\niii. Full system installation and training support must be provided. | item7 | 2 | Nos |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail