Nagpur Smart City Project Planning , Designing , Constructing , Erecting , Testing And Commissioning Of Solid Waste Transfer Stations At Various Locations In Nagpur , Maharashtra
Tender Value
39.90 Crore
Estimated cost
Bid Submission
19 Dec 2019
0 days left
EMD
19.95 Lakhs
Bank guarantee accepted
Document Fee
3540
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Nagpur Smart City Project Planning , Designing , Constructing , Erecting , Testing And Commissioning Of Solid Waste Transfer Stations At Various Locations In Nagpur , Maharashtra
BOQ
| Name of Work: Planning, designing, constructing, erecting and commissioning solid waste Transfer Stations at various locations in Nagpur, Maharashtra | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity for 5 Locations | Units | |
| 1 | 1 | Levelling of plot, excavation, pre-constructional antitermite treatment, murum filling as per site requirement with hard murum having laboratory soaked CBR not less than 12, soling, GSB including compaction, PCC M-15 grade, RCC M-25 grade impermeable concrete for beams, columns, footings, flooring, tremix flooring, plastering, necessary expansion joints, painting including required reinforcement to withstand load impacts upto 40 T/m2 with proper approach to plot, peripheral drainage system, FRP drains adjacent to compactor space, C. I. / FRP moulded grating covers for drains, cutting contraction joints in concrete with proper slope and drainage arrangement, the drains to be connected with existing nearby drainage system of NMC, backfilling, finishing as directed by Engineer -in- charge etc. complete. | item1 | 18000 | m2 |
| 2 | 2 | Construction of brick masonry decorative compound wall of required height with RCC M-25 grade for footings, beams, columns, plastering, painting with M. S. entry & exit mechanised/automated sliding gates of required size & strength along with external storm water drain & cattle catcher as directed by Engineer -in- charge etc. complete. | item2 | 4680 | m2 |
| 3 | 3 | Construction of security cabin cum control panel room cum administrative block (G+1) of required size in fly ash brick masonry with RCC M-25 grade framed structure including gents & ladies toilet facility, RCC staircase with headroom, aluminium ladder, parapet wall, rainwater downtake pipes, RCC water tank over staircase tower, water proofing, finishing, painting, flush doors, channel gate, UPVC windows with S. S. grills & toughened glass, supply of required office furniture as directed by Engineer -in- charge etc. complete. | item3 | 481 | m2 |
| 4 | 4 | Designing, construction & erection of M. S. and Pre-fabricated Engineered Building (PEB) combined fabricated superstructure designed as per relevent I. S. code with a height of 12.00m (Eaves) above finished plinth level to 13.05m (Ridge) with adequate air turbine ventilator system, wall cladding and roof sheeting of 0.50mm, coloured coated galvalume profile sheet, M. S. works with bracings, trusses, purlins, all primary members hot rolled with one coat red oxide primer and two coats synthetic super enamel paint, all secondary members cold formed with one coat of red oxide primer and two coats of enamel paint including entire sub-structure upto plinth level with footings, columns, pedestals, plinth beams with suitable foundation, PEB anchor bolts, platform with ramp facility in RCC M-25 grade concrete, protection to PEB columns, hopper loading platform in PEB Deck Panel composite RCC slab structure with reinforcement at a height of 6m of minimum size 12m x 20.40m, required protective coating, Eaves gutter with full height downspouts, suitable rain water downtake pipes, 2.00m wide projected canopy / facia at all sides with its structure, opening upto 5m height on all sides from plinth level, providing air suction and cleaning system to collect the air and purify from dust and odours for safe and clean work environment, providing high pressure station air odourising system with sprinklers all around the shed to purify the air for safe and clean work environment, providing anti-smell system for hopper to purify the air from odour for safe and clean work environment with the noise less than 75dB in the station, to make adequate provisions for fire and safety arrangement for entire premises as per norms of the fire department and obtaining necessary permissions / approvals from respective competent authority / fire department, to provide adequate sprinklers, smoke detectors, fire hydrants, CO2 type and water type fire extinguishers at appropriate locations and all these systems to be placed in solid waste transfer station, providing RFID readers to be installed at transfer stations, these readers would fetch vehicle details automatically from RFID tags placed on each vehicle in such a way that supervisor would not have to enter the vehicle details manually, providing the CCTV cameras and surveillance system at transfer station to monitor entry and exit of vehicles and to capture the image of vehicle with number plate visible directly in the system at the time of saving record, the system shall be integrated with city operation centre (COC) located at 6th Floor, NMC building, Civil lines, Nagpur, sufficient quantities of CCTV cameras to be installed to ensure that all the operations are effectively monitored. Providing name boards, signages, logos with insurance of all structures for 2 years, providing intelligent operating and control system visual status and control on the computer in the central control room for the compactor and accessories to manage the statistical data for stationary compactor. Providing Biometric devices to scan finger print of the supervisor / staff stationed at Transfer Station to authenticate user and ensure his / her availability. The hardware specified above is required to be integrated with the software application. The application to be a completely integrated application and user should not be required to access separate application to perform required task for specific hardware and all these systems to be placed in solid waste transfer station as directed by Engineer -in- charge etc. complete. | item4 | 3700 | m2 |
| 5 | 5 | Designing & construction of RCC ramp with ascending leg, horizontal platform & descending leg from 0.0m to 6.60m height with RCC M-25 grade impermeable concrete for beams, columns, footings, tremix flooring, RCC crash barriers, plastering, necessary expansion joints on ramps, painting including required reinforcement to withstand load impacts upto 40 T/m2, connecting properly with hopper loading platform as directed by Engineer -in- charge etc. complete. | item5 | 4850 | m2 |
| 6 | 6 | Construction of borewell/open well including submersible pump, RCC underground & overhead water tank of required capacities, CPVC water supply pipeline with seeking connection from OCW, the permanent smart water supply meter to be taken in the name of NMC / NSSCDCL by depositing the necessary connection charges, entire plumbing system, UPVC sanitory works, \"A\" class sanitarywares, storm water & sewage drainage system with proper disposal arrangements, RCC underground covered leachate collection chamber / sump of adequate capacity with manholes, ladder and required pumping arrangements, the leachate generated from the compaction of waste to be collected from the drains and connected to the underground sump as required and as directed by Engineer -in- charge etc. complete. | item6 | 5 | Job per location |
| 7 | 7 | Green belt development around periphery, landscaping including Bamboo Plantation & fragrance emitting trees, FRP tree gratings as required with species as approved, providing 2 years maintainance as directed by Engineer -in- charge etc. complete. | item7 | 5 | Job per location |
| 8 | 8 | Internal electrification of all civil structures, external electrification of premises, LED lighting inside the PEB shed, street lighting with G. I. octagonal poles of adequate heights, required LT / HT connection from atleast two feeder line, incoming cable from designated source, providing 3 layer HDPE / DWC pipes for electrical duct along with spacers, FRP cable trays, road cutting charges, depositing MSEDCL charges, the permanent energy meter to be taken in the name of NMC / NSSCDCL by depositing the necessary connection charges, net metering provision for solar, the power requirement to be designed considering the installation of mechanical equipments to handle solid waste equivalent to 150 MT per day as directed by Engineer -in- charge etc. complete. | item8 | 5 | Job per location |
| 9 | 9 | Designing, drawing, supply, erection, testing and commissioning of 5 KW Solar Panel System &/or modular wind turbine hybrid system with necessary supporting arrangements at technically feasible location including 2 years comprehensive maintenance, sanctioning from MSEDCL & Electrical Inspector and other necessary department of Solar Power Generation Plant (On grid batteryless solar plant) with all accessories PV module's with adequate capacity of 5 KW. The capacity of unit shall depend on the common load of building & sanction capacity or as per direction of electrical in charge for individual building, 3-phase inverter (PCU) or single phase three inverter (PCU) in view of load requirement, with advance technology having arrangement of power generation records current, voltage all type of data access system, RS-45 port can connect with computer to bring out the data etc. complete with all required protection proper size of incoming & outgoing cables up to energy meter as per direction of electrical -in- charge and electrical consultant. (The Bidder has to take approval of drawings & make before starting the erection as per specification details). The work to be executed as per the directions of Engineer -in- charge. | item9 | 5 | Job per location |
| 10 | 10 | Providing, erecting, testing and commissioning the complete weigh bridge system with control room including scale having capacity of 40 MT, this device will be used to calculate weight of the waste collected by vehicle entering and exiting Transfer Station with generation of weigh slip data and record, non tampering and calibration certification from the reputed agencies to be provided and all these systems to be placed in solid waste transfer station as directed by Engineer -in- charge etc. complete. | item10 | 5 | Job per location |
| 11 | 11 | Providing, erecting, testing and commissioning Stationary Compactor with cylinder, motor, hydraulic lifting beam for container, guillotine gate, retractable type hydraulic door clamping arrangement and electronic deodorizer of approved make and required capacity alongwith hopper assembly of 20 cum capacity receiving hopper mounted above stationary compactor of approved make with all necessary accessories, foundations, provision of adequate rails for mounting the available capsules/container (20cum) with insurance of all equipments for 2 years and placed in solid waste transfer station as directed by Engineer -in- charge etc. complete. | item11 | 10 | Nos |
| 12 | 12 | Providing required equipments and tool kits for day to day operations and maintenance of transfer station, providing required first aid kits, providing at least one set of Personal Protective Equipments (PPE's) required for the safe operations of Transfer Station but not limited to Gloves, Boots, Uniform, Safety mask, Raincoat, Broom, Spades, Shovels etc. The Transfer Stations shall be provided with signages posted prominently at the entrance containing the information such as Facility Name, Owner / Operator with phone number and address, Emergency phone numbers for fire, police and medical assistance, Hours of operation if applicable, prohibited materials, the materials accepted for recycling, the Tipping fee schedule if applicable, the presence of an electric fence if applicable and all these facilities to be placed in solid waste transfer station as directed by Engineer -in- charge etc. complete. | item12 | 5 | Job per location |
| 13 | 13 | Providing, erecting, testing and commissioning the complete diesel engine generator set of required capacity, 3 phases with an acoustic enclosure conforming to the CPCB / MPCB standards and all these systems to be placed in solid waste transfer station as directed by Engineer -in- charge etc. complete. | item13 | 5 | Job per location |
| 14 | 14 | Miscellaneous Items required for full operation of the project which are not included in above items (Details shall be submitted by agency separately) | item14 | 5 | Lumpsum |
| 15 | 15 | Total cost excluding GST | item15 | 1 | Nos |
| 16 | 16 | 12% for GST on total cost (GST shall be paid on actual) | item16 | 1 | Nos |
AI Tender Summary
Tender Timeline
Nov 04, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedDec 19, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 20, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender