}

Construction Of Two Storied Four Unit Staff Quarter Of The Directorate Of Airtsc Assam, Khanapara Guwahati-Assam

Assam State Housing Board has published Construction Of Two Storied Four Unit Staff Quarter Of The Directorate Of Airtsc Assam. Submission Date for this Tender is 19-11-2019. Building Work Tenders in Khanapara Guwahati Assam. Bidders can get complete Tender details and download the document.




Tender Notice

22356042
Construction Of Two Storied Four Unit Staff Quarter Of The Directorate Of Airtsc Assam
Open Tender
Indian
Assam
Khanapara Guwahati
19-11-2019

Tender Details

Construction Of Two Storied Four Unit Staff Quarter Of The Directorate Of Airtsc Assam

Key Value

Document Fees
INR 3000 /-
EMD
INR 120000.0 /-
Tender Value
INR 60 Lakhs /-

BOQ Items

Name of Work: Construction of two storied four unit staff staff Quarter of the Dicrectorate of AIRT & SC Assam
Sl. No. Item Description Item Code / Make Quantity Units
1 1 Civil Work: Anx-A_1
2 2 Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels Anx-A_2 5.67 m3
3 3 Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels Anx-A_3 87.35 m3
4 4 Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. Anx-A_4 60 Nos.
5 5 Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. Anx-A_5 201.07 m2
6 6 Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified. Anx-A_6 12 m3
7 7 Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Anx-A_7 34.4 m2
8 8 Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately). Anx-A_8 1.2 m3
9 9 Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: Anx-A_9 40.08 m2
10 10 Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) Anx-A_10 17.66 qtl
11 11 Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) Anx-A_11 5.94 m3
12 12 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) Anx-A_12 687.61 m2
13 13 Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. Anx-A_13
14 14 a) sal wood Anx-A_14 1.25 m3
15 15 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. Anx-A_15
16 16 a) 1 :4 Anx-A_16 1375.22 m2
17 17 Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) Anx-A_17 42 m2
18 18 Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). Anx-A_18 49 m2
19 19 Providing vitrified floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pidilite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) Anx-A_19 220.64 m2
20 20 Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pidilite/Rouf)/ white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). Anx-A_20 98.39 m2
21 21 Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. Anx-A_21 11.2 m2
22 22 Supplying, fitting and fixing anodised aluminium decorated grill with anodised aluminium rectangular frame of 'F' and 'H' section fitted with walls, columns or stiffeners by special type of screws as per specification by the Department for all levels. (Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer) Anx-A_22 49 m2
23 23 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. Anx-A_23
24 24 a) In cement mortar 1:3 Anx-A_24 220.64 m2
25 25 Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. Anx-A_25 1595.82 m2
26 26 Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. Anx-A_26 1595.86 m2
27 27 Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter, sand papering and knotting. Anx-A_27 250 m2
28 28 Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. Anx-A_28 250 m2
29 29 Painting two coats (excluding priming coat) on new steel and other metal surface with alluminium paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) and brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. Anx-A_29 196 m2
30 30 Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem "Rakshak" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. Anx-A_30 1595.86 m2
31 31 Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. Anx-A_31 59.08 m
32 32 Providing plinth protection with bricks flat laid in cement mortar 1: 4 and finished with 15mm thick cement plaster in prop. 1:2 with a floating coat of neat cement finish. Anx-A_32 41.36 m2
33 33 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. Anx-A_33 1595.86 m2
34 34 Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) Anx-A_34 200 m2
35 35 Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. Anx-A_35 15.12 m3
36 36 Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. Anx-A_36
37 37 (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading. Anx-A_37 67.2 m3
38 38 SANITARY AND WATER SUPPLY WORKS: Anx-B_1
39 39 Providing fitting and fixing Vitreous china wall hang water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) Anx-B_2
40 40 1x2x2 = 4 Nos. Anx-B_3
41 41 (i) Wall mounted Closet Alexa (inclusive of seat cover and fittings) \n(Cat. No. 92032) Anx-B_4 4 Each
42 42 Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) Anx-B_5
43 43 1x2x2 = 4 Nos. Anx-B_6
44 44 (B) Hindware Make Anx-B_7
45 45 (i) Concealed Cistern 83mm with Prime flush plate 83mm Anx-B_8 4 Each
46 46 Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. Anx-B_9
47 47 1x2x2 = 4 Nos. Anx-B_10
48 48 a) White Anx-B_11
49 49 (i) Urinal (Cat. No.URS-WHT-0704) with Sensor (Cat. No.SNR-CHR-51097) Anx-B_12 4 Each
50 50 Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) Anx-B_13
51 51 1x2x2 = 4 Nos. Anx-B_14
52 52 (B) Hindware Make Anx-B_15
53 53 (a) White Anx-B_16
54 54 (iv) Deimos 640 x 420 (Cat. No.10094/11037) Anx-B_17 4 Each
55 55 Providing fitting and fixing Decorative Mirror complete as directed and specified. Anx-B_18
56 56 1x2x2 = 4 Nos. Anx-B_19
57 57 (A) Parryware Make Anx-B_20
58 58 (a) Size 800mm x 600mm Anx-B_21 4 Each
59 59 Providing fitting and fixing Glass Shelf complete as directed and specified. Anx-B_22
60 60 1x2x2 = 4 Nos. Anx-B_23
61 61 (i) Agmeco make Anx-B_24
62 62 (a) Cubin (Cat. No.CB-00104) Anx-B_25 4 Each
63 63 Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. Anx-B_26
64 64 1x2x2 = 4 Nos. Anx-B_27
65 65 (a) Parryware Make Anx-B_28
66 66 (i) Recess SP & SG dish (Cat.No. C9935) Anx-B_29 4 Each
67 67 Providing, fitting and fixing CP towel rail complete as directed and specified. Anx-B_30
68 68 1x2x2 = 4 Nos. Anx-B_31
69 69 (b) Sona make Anx-B_32
70 70 (x) Towel rail with hook 900mm long (Cat.No.TR-0606) Anx-B_33 4 Each
71 71 Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. Anx-B_34
72 72 1x2x8 = 8 Nos. Anx-B_35
73 73 (c) Agmeco Made Anx-B_36
74 74 (d) Cera make (cat.No.CA 102) Anx-B_37 8 Each
75 75 Providing, fitting and fixing Chrome Plated tumbler holder complete as directed and specified. Anx-B_38
76 76 1x2x2 = 4 Nos. Anx-B_39
77 77 (b) Agmeco make Anx-B_40
78 78 (c) Cera make (cat.No.CA 104) Anx-B_41 4 Each
79 79 Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining, fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. Anx-B_42
80 80 b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. Anx-B_43
81 81 i) 110mm dia. Anx-B_44 75 Each
82 82 ii) 75mm dia. Anx-B_45 46 Each
83 83 Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. Anx-B_46
84 84 b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. Anx-B_47
85 85 ii) 100mm dia. Anx-B_48 6 Each
86 86 ii) 75mm dia. Anx-B_49 4 Each
87 87 Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. Anx-B_50
88 88 b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. Anx-B_51
89 89 ii) 100mm dia. Anx-B_52 4 Each
90 90 ii) 75mm dia Anx-B_53 1 Each
91 91 Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. Anx-B_54
92 92 b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. Anx-B_55
93 93 i) 110mm dia. Anx-B_56 6 Each
94 94 Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. Anx-B_57
95 95 d) 25 mm dia (Medium) Anx-B_58
96 96 i) Using Tata make Anx-B_59 125 RM
97 97 f) 15 mm dia (Medium) Anx-B_60
98 98 i) Using Tata make Anx-B_61 221 RM
99 99 Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Anx-B_62
100 100 Jaquar Anx-B_63
101 101 (a) Continental / Clarion Anx-B_64
102 102 (iv) 15mm dia, (Concealed stop cock extra heavy with adjustable wall flange ) Anx-B_65 5 Each
103 103 Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Anx-B_66
104 104 (a) Continental Anx-B_67 4 Each
105 105 Supplying fitting and fixing Chrome Plated (C.P.) sink cock of approved brand as directed and specified. (G.I. & C.P pipes will be measured and paid separately) Anx-B_68
106 106 Jaquar brand Anx-B_69
107 107 ii) Sink cock with raised 'J' shaped swinging spout Anx-B_70 4 Each
108 108 Supplying fitting and fixing Chrome Plated (C.P.) shower 15mm dia. Of approved brand as directed and specified. (Pipes will be measured and paid separately) Anx-B_71
109 109 Jaquar make Anx-B_72
110 110 a) Continental Anx-B_73
111 111 (iii) Pressure adjustable shower with revolving joint Anx-B_74 4 Each
112 112 Supplying, fitting and fixing Chrome Plated (C.P.) basin mixer complete as directed. Anx-B_75
113 113 Lauret make Anx-B_76
114 114 i) Central hole basin mixer Cat No. 1211 for wash basin Anx-B_77 4 Each
115 115 Supplying, fitting and fixing Chrome Plated (C.P.) wall mixer complete as directed. Anx-B_78
116 116 Sona make Anx-B_79
117 117 c)Wall mixer with bend Cat No.1118 Anx-B_80 4 Each
118 118 INTERNAL WIRING Anx-C_1
119 119 A.(i) WIRING Anx-C_2
120 120 Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system including and fixing 5 pin 16 Amps flush type socket outlets and 16 Amps flush type switch ( Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt.),GI/ MS switch board (ISI marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm cable to the 3rd pin of the socket as required complete with 2 mm thick 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) \n Anx-C_3
121 121 Long point up to 10.00 metre. Length. Anx-C_4 2 Each
122 122 Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) with earth continuity in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit wiring system. Anx-C_5
123 123 (a) with 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit. Anx-C_6 120 Metre.
124 124 b) with 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. in 20 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit Anx-C_7 20 Metre.
125 125 c) with 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. in 25 mm. dia. rigid low halogen SFT PVC IS: 9537 Part - III conduit Anx-C_8 15 Metre.
126 126 Wiring for light/ fan/ call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 2 mm thick 20mm dia rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete Anx-C_9
127 127 Short point up to 3.00 metre. length. Anx-C_10 8 Each
128 128 Medium point up to 6.00 metre. Length. Anx-C_11 12 Each
129 129 Long point up to 10.00 metre. Length. Anx-C_12 2 Each
130 130 Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick rigid low halogen SFT PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. Anx-C_13
131 131 Medium point up to 6.00 metre. Length. Anx-C_14 4 Each
132 132 Long point up to 10.00 metre. Length. Anx-C_15 2 Each
133 133 Wiring for 5 pin 6 amp plug with 1.5 sq mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable HFFR/ZHFR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco or Equivalent Make as approved by the Deptt.) including providing & fixing 5 pin 6 Amp socket outlet (Anchor penta /Gold medal /Kolor kany.Kom/Havells or equivalent make as approved by the Deptt./ Gold medal/ Kolor kany.kom) and 6 amp flush type switch (Anchor or equivalent Make) earthing the 3rd pin of the socket as required on the switch board in surface/ recessed P.V.C. conduit wiring system. When fitted on same board of light and fan. Anx-C_16 4 Each
134 134 (ii) CONDUIT LAYING Anx-C_17
135 135 Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: Anx-C_18 50 Metre
136 136 Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: Anx-C_19 40 Metre
137 137 Supply and fixing 38 mmdia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: Anx-C_20 10 Metre
138 138 Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. Anx-C_21
139 139 250 mm x 300 mm x 60 mm deep (Nominal size Anx-C_22 4 Each
140 140 SUB-TOTAL FOR A Anx-C_23
141 141 B. DISTRIBUTION Anx-C_24
142 142 Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 surface mounting SPN MCB DB incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_25
143 143 Schneider neo break, C&S, Havells, INDOASIAN, HPL or equivalent as approved by the Deptt.)make) Anx-C_26
144 144 12 way SPN double door Anx-C_27 2 Each
145 145 Supplying with fitting and fixing 30/100/300mA sensitivity 240/415V 50Hz DP RCBO of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_28
146 146 30mA sensitivity DP RCBO\n(ABB, Schneider MG, legrand, Hager make) Anx-C_29
147 147 40A Anx-C_30 2 Each
148 148 Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_31
149 149 B Series\n(Schneider MG, legrand, Hager make) Anx-C_32
150 150 6 to 32A Anx-C_33 16 Each
151 151 C Series\n(Schneider MG, legrand, Hager make) Anx-C_34
152 152 6 to 32A Anx-C_35 4 Each
153 153 SUB-TOTAL FOR B Anx-C_36
154 154 C: SWITCH & SOCKETS Anx-C_37
155 155 Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. Anx-C_38
156 156 1-2 module type Metal Anx-C_39 2 Each
157 157 3 module type Metal Anx-C_40 4 Each
158 158 4 module type Metal Anx-C_41 4 Each
159 159 8 module type Metal Anx-C_42 2 Each
160 160 12 module type Metal Anx-C_43 6 Each
161 161 Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. Anx-C_44
162 162 2 module Anx-C_45 2 Each
163 163 3 module Anx-C_46 4 Each
164 164 4 module Anx-C_47 4 Each
165 165 8 module Anx-C_48 2 Each
166 166 12 module Anx-C_49 6 Each
167 167 Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_50 12 Each
168 168 Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_51 56 Each
169 169 Supplying with fitting fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_52 4 Each
170 170 Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_53 2 Each
171 171 Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_54 12 Each
172 172 Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_55 2 Each
173 173 Supplying with fitting and fixing of 25A Modular Motor Starter 2M , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_56 2 Each
174 174 Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. Anx-C_57
175 175 120 watt electronic modular step speed control 2 - module type Anx-C_58 12 Each
176 176 Supplying with fitting and fixing of LED Foot lamp with Box MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. Anx-C_59 4 Each
177 177 SUB-TOTAL FOR C Anx-C_60
178 178 D: FIXTURES AND FITTINGS Anx-C_61
179 179 (i) Essential Anx-C_62
180 180 Supplying and fixing of batten holder including 11 W CFL lamp and connection as approved by the Deptt.)as required. Anx-C_63 16 Each
181 181 Supplying including fitting and fixing of Call bell indicator with register 6 A ,250 V A.C 1 way 5P 1 module complete as directed and specified by the deptt. (Model Ref. 573415 Legrand/ equivalent make) Anx-C_64
182 182 1.Call bell with indicator(Legrand/ C&S or equivalent as approved by the Deptt.) make) Anx-C_65 1 Each
183 183 Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) Anx-C_66
184 184 Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) Anx-C_67 12 Each
185 185 Compact and Sleek Channel type CFL luminaries in white epoxy power coated finish and Decorative click fit end caps and Electronic ballast with 1 X 36 W CFL(Crompton Greaves make Model- TAK 36 EB e-AKTIV or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make). Anx-C_68 12 Each
186 186 Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. Anx-C_69
187 187 Domestic Anx-C_70
188 188 High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) Anx-C_71 2 Each
189 189 Exhaust fan Anx-C_72
190 190 Numbering of ceiling fans/exhaust fans as required Anx-C_73 12 Each
191 191 (ii) Non Essential Anx-C_74
192 192 Supplying and fitting fixing of electric storage water heater [Geyser] of AOS-Jaquar make) including necessary connection etc. as required complete and as directed by the Department. Anx-C_75
193 193 15 Litre Capacity (Digital model) Anx-C_76 2 Each
194 194 Supplying with installation testing and commissioning of Hi -- wall 4 STAR rating non ducted split type air conditioner of the following capacity with cordless remote complete with indoor and outdoor unit, copper pipe and electrical connection as approved by the Deptt.)up to 5 m between the room unit and out door unit as directed by the department. Anx-C_77
195 195 1.5 Ton capacity Anx-C_78
196 196 (Carrier make) Dura cool star premium Anx-C_79 2 Each
197 197 Supplying with fitting and fixing Voltage stabilizer of the following specification complete including making necessary connection as approved, specified and directed by the deptt. (SKYLAND / Vee-Dee / V GUARD / VERTEX/ INDO/ VENUS make) Anx-C_80
198 198 2.0 KVA Automatic Input 90-280 V Out put 200-240 V Anx-C_81 2 Each
199 199 E: CABLING Anx-C_82
200 200 Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Anx-C_83
201 201 16.00 Sq. mm.4 Core armoured U.G. cable Anx-C_84 32 Metre
202 202 F: EARTHING Anx-C_85
203 203 Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. Anx-C_86 2 Each
204 204 Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. Anx-C_87 100 Metre
205 205 Supply and drawing of earth continuity with 1.50 SQ mm single core flame retardant low smoke PVC insulated multistrand twisted copper cable (Green colour in the existing PVC conduits including making necessary connection as approved, specified and directed by the deptt. Anx-C_88 200 Each
206 206 EXTERNAL ELECTRICAL WORKS Anx-C_89
207 207 A. MAIN INCOMING PANEL FROM TRANSFORMER FOR RESIDENTIAL UNITS (STAFF QUARTER) Anx-C_90
208 208 Supplying, Fabrication, Erection ,Testing commissioning of vermin and dust proof (IP-43 protection)totally enclosed cubical type compartmental floor mounting panel board of size 1450mm x 1000mm x 500mm made of 16 SWG(1.66mthick C.R. sheet and 300mm x 30mmx5mm MS Angle having 4 no legs at the bottom and C.R. sheet roofing on the top complete painting with 2 coats of Red Oxide metal primer and 2 coats of Enamel paint. The panel board is to be erected in 1 :3:6 PCC foundation including excavation Complete neatly Wiring done, with the provision for the following Electrical Accessories. Incomer 125A ,4Pole 25KA AC 415V MCCB with D.P. Handle OUTGOING TPN MCB 5nos Anx-C_91
209 209 0-125A (Digital) Ammeter Anx-C_92
210 210 0-500V (Digital) Ammeter Anx-C_93
211 211 Ammeter Selector Switch Anx-C_94
212 212 Voltmeter Selector Switch Anx-C_95
213 213 Indicator Lamp (R,Y, B) Anx-C_96
214 214 2A Solid Lock fuse Anx-C_97
215 215 125/5 CT Coils Anx-C_98
216 216 Control Wiring Anx-C_99 1 Each
217 217 Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_100
218 218 25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) Anx-C_101
219 219 80A Anx-C_102 2 Each
220 220 125A Anx-C_103 1 Each
221 221 Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_104
222 222 B Series\n(ABB, Schneider MG, legrand, Hager make) Anx-C_105
223 223 40A Anx-C_106 4 Each
224 224 B. DISTRIBUTION PANEL Anx-C_107
225 225 PANEL IN-DOOR Floor/Wall mounting Powder Painted (6 Out going) Anx-C_108
226 226 Supplying including installation, commissioning of vermin and dust proof totally enclosed, Phosphatised Powder Painted cubical indoor type floor/wall mounting compartmentalize panel board of size 1.35M X 1.20MX 0.40M made of 16 SWG1.66 m thick C.R. sheet and 35mm X 35mm X 5mm size angle having 4 no legs at the bottom. The panel board is to be erected in 1 : 3 : 6 PCC foundation including brick soling / grouting etc. complete neatly Wiring done with provision for one no 125/160A 4pole MCCB or Switch Fuse Unit as incomer and provision for 6nos DP or TPN out going as specified and directed by the deptt. confirming to IP 43 protection comprising of the following electrical items: Anx-C_109
227 227 1. 20mm X 3mm4 strip copper Bus-Bar 0.6 M length each Anx-C_110
228 228 2. Digital 3 Phase Voltmeter Accuracy class 0.5 - 1 no Anx-C_111
229 229 3. Digital 3 Phase Ammeter Accuracy class 0.5 - 1 no Anx-C_112
230 230 4. Pilot Lamp with integral ckt LED 110- 230 V (Red, Yellow,& Blue - 3 no Anx-C_113
231 231 5. Voltmeter & Ammeter Selector Switch - 2 no Anx-C_114
232 232 6. 2 A Slide fuse unit - 3nos Anx-C_115 1 Each
233 233 Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adjustable Ir setting 0.7) without enclosure) of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_116
234 234 25 KA 415V 50 Hz 4P MCCB \n(Schneider, legrand, Siemens, Indo Asian make) Anx-C_117
235 235 63A Anx-C_118 1 Each
236 236 Supplying with fitting and fixing DP 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. Anx-C_119
237 237 B Series\n(ABB, Schneider MG, legrand, Hager make) Anx-C_120
238 238 40A Anx-C_121 6 Each
239 239 C. UG CABLING FROM TRANSFORMER TO THE RESIDENTIAL BUILDING (STAFF QUARTER) Anx-C_122
240 240 Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . Anx-C_123
241 241 2 Core A2XWaY A2XFaY Anx-C_124
242 242 4.00 Sq.mm 2 Core armoured U.G. cable Anx-C_125 100 Metre
243 243 3 & 1/2 Core A2XFY Anx-C_126
244 244 35.00 Sq. mm.3 & 1/2 Core armoured U.G. cable Anx-C_127 100 Metre
245 245 D. AREA LIGHTING Anx-C_128
246 246 Supply with fitting & fixing 60 mm dia 1830 mm height integrated with acrylic diffuser, translucent top, bottom clear , black powder painted finish tubular pole .The pole is made of GI tube with GI cylindrical control box with service door and a circular base plate, pre-cabled with control gear, 36 W CFL lamp and suitable for operation on 240 V 50 Hz single phase AC supply . The pole is to be fitted on 1:3:6 PCC pole foundation of size 300 mmx300 mmx1200 mm with grouting nuts & bolts as specified & directed by the deptt .(Metal Coats make). COBRA model or equivalent. Anx-C_129 2 Set
247 247 Supplying with fitting & fixing of the following integral type street light luminaries complete and consisting of single piece integral epoxy gray powder coated dia cast aluminium housing gasket, pot optic reflector, cast aluminium frame from heat resistance toughened clear glass cover and accessories such as Condenser, lamp Holder, Ballast, lamp etc. in the existing pole including making necessary connection as approved by the Deptt.)with 2× 2.50 sq.mm F.R. multistrand and P.V.C. insulated single core copper cable as specified and directed by the department. Anx-C_130
248 248 Philips make) Cat No.SRP 308 1xSON 70W FG For Lamp SON70W / Crompton Greaves make) SSSG12071H/FG For lamp 1x70W HPSV (/ Havells make): LHRS13170A99 For lamp 1x70W SON-E. Anx-C_131 2 Each
249 249 E. EARTHING Anx-C_132
250 250 Supply, installation & testing of G.I. earth station with perforated 50 mm dia and 3.00 Metre long heady duty G.I. pipe with necessary 50 mm dia. G.I. Fittings such as Socket, Tee, elbow, nipple and 65 mmx50 mm G.I. reducing socket for funnel including locking arrangement 300 mmx300 mmx6 mm hinged cover C.I. earth plate complete with digging of earth pit, construction of brick chamber and plastering of both inner & outer surface of wall as specified and directed by the deptt . Anx-C_133 2 Each
251 251 Supplying & laying of 8 SWG G.I. earth from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. Anx-C_134 100 Metre.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail