Renovation Of Six Bedded Hostels First Floor Of Airtsc For Converting To Two Vip Suits And A Reading And Reference Section Of The Library And A Store Room For New Arrivals
Tender Value
80 Lakhs
Estimated cost
Bid Submission
19 Nov 2019
0 days left
EMD
1.60 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khanapara Guwahati → Assam
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of Six Bedded Hostels First Floor Of Airtsc For Converting To Two Vip Suits And A Reading And Reference Section Of The Library And A Store Room For New Arrivals
BOQ
| Name of Work: Renovation of Six bedded Hostels (First Floor) of AIRT & SC for converting to two VIP suits and a reading reference section of the Library and a store room for new arriavals of the Directorarte of AIRT & SC Assam | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Work: | Anx-A_1 | ||
| 2 | 2 | Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels | Anx-A_2 | 4.89 | m3 |
| 3 | 3 | Demolishing brickwork including stacking of serviceable materials and disposal of unserviceable materials as directed for all levels | Anx-A_3 | 94.92 | m3 |
| 4 | 4 | Dismantling and removing the existing door and window frame (chowkath) both wooden and steel of different sizes without damaging the walls and removing the frame and necessary repairs to the edges of the walls as directed for all levels. | Anx-A_4 | 40 | Nos. |
| 5 | 5 | Demolishing CC floors of various thickness including top layer and base course and disposal of debris as directed for all levels. | Anx-A_5 | 226.19 | m2 |
| 6 | 6 | Supplying, fitting and fixing in position reinforcement bars conforming to relevant I.S. Code for R.C.C. work/ R.B. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete.\n(No extra measurement for lap, hook, chair, anchor etc. will be entertained in the measurement as they are included in the rate) (Upto 1st floor level) | Anx-A_6 | 34.88 | qtl |
| 7 | 7 | Providing form work of ordinary timber planking so as to give a rough finish including centering, shuttering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work in: | Anx-A_7 | 212.51 | m2 |
| 8 | 8 | Providing and laying plain/reinforced cement croncrete works cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) | Anx-A_8 | 20.38 | m3 |
| 9 | 9 | 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) | Anx-A_9 | 556.76 | m2 |
| 10 | 10 | Providing wood work in frame (chowkaths) of doors, windows, clerestory windows and other similar works wrought, framed and fixed in position in contact with C.C or brick masonry wall including supplying, fitting and fixing with M.S. hold fast (40mmx3mmx250mm) as per design embeded in cement concrete block in proportion 1:2:4 and with two coats of kiricide oiling to the timber faces in contact with C.C and masonry as directed and specified. | Anx-A_10 | ||
| 11 | 11 | With Sal wood | Anx-A_11 | 0.63 | m3 |
| 12 | 12 | 20 mm thick Cement plaster in two coats on single or half brick walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. | Anx-A_12 | ||
| 13 | 13 | 1:4 | Anx-A_13 | 1339.71 | m2 |
| 14 | 14 | On fair side (backing coat 15mm and finishing coat 5mm thick in cement mortar ………………………….. | Anx-A_14 | 1339.71 | m2 |
| 15 | 15 | Providing, fitting and fixing anodised aluminuim framed glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand with door style of size 88mm x 45mm x 2.5mm, top rails 50mm x 45mm x 2mm lock rails 100mm x 45mm x 2mm and bottom rails 100mm x 45mm x 2.5mm fitted with glazing clip, special type rubber gasket complete including hydraulic floor spring, pivot, tower bolt in each leaf, aluminium door handle, lock, angles, cleat etc complete as specified and directed by the department at all levels. | Anx-A_15 | 18.48 | m2 |
| 16 | 16 | Providing, fitting and fixing anodised aluminium windows and ventilators of standard sections of approved brand without horizontal glazing bars joints mitred and welded (manufactured to relevant IS specifications) fitted with 6mm x 3.15mm lugs 100mm long embedded in CC blocks 150mm x 100mm x 100mm in 1:3:6 mix including providing and fixing handles, frictions stays, joining cleat, bolting device, locking arrangement, spring catch as required complete as specified and directed for all levels. (Cement concrete to be measured and paid separately). | Anx-A_16 | 31.18 | m2 |
| 17 | 17 | Supplying, fitting and fixing anodised aluminium decorated grill with anodised aluminium rectangular frame of 'F' and 'H' section fitted with walls, columns or stiffeners by special type of screws as per specification by the Department for all levels. (Aluminium Alloy procured from primary aluminium producer (On submission of certificate of alloy purchaging from primary producer) | Anx-A_17 | 31.18 | m2 |
| 18 | 18 | Providing, fitting and fixing 24mm/ 29mm thick polymer reinforced moulded PVC door shutters fixed to the chowkath with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately) | Anx-A_18 | 4.2 | m2 |
| 19 | 19 | Providing, fitting and fixing factory made wooden panelled doors with panel inserts of 75mm to 50mm width and 12mm to 20mm thickness,joined together with continous tongue and groove joints glued together with Movicol or other approved adhesive leaving a vertical groove of 7.5mm to 15mm between the inserts,the edges of panel inserts being feather tongue into styles and rails including providing three pairs of oxidised M.S butt hinges (100mm x75 mm x3.55mm) and furnishing with moulded timber beading of size 25mmx15mm around the panels complete as per drawing (moulded timber bead and all fittings except hinges to be paid separately) | Anx-A_19 | 18.48 | m2 |
| 20 | 20 | Providing VITRIFIED floor tiles of approved quality of specified size, shape and thickness not less than 18mm on floors, skirtings, risers and treads of steps over 15 mm thick base of cement mortar in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf) / white cement slurry mixed with approved pigment to match shade of tiles, mixed with approved pigment to match the shade of the tiles, complete at all levels as specified and directed. (Coloured pigment should be in conformity with colour of tiles and as approved and directed by the Department) | Anx-A_20 | 268.29 | m2 |
| 21 | 21 | Providing polished vitrified wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirtings over cement mortar bed 10 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with Fix-A-Tile (Choksey/ Sika/ Pidilite/ Rouf)/white cement slurry mixed with approved pigment to match shade of tilesc complete at all levels as specified and directed. (coloured pigment should be in conformity with colour of tiles and as approved and directed by the department). | Anx-A_21 | 120.6 | m2 |
| 22 | 22 | Chequered Terrazo tiles of 22 mm thickness with marble chips of sizes up to 6 mm fixed on wall with 10 mm thick bed of cement plaster in proportion 1:3 (1 cement : 3 coarse sand) jointed with neat white cement slurry mixed with pigment to match the shades of tiles including rubbing and polishing complete with tiles of any approved shade/shades. | Anx-A_22 | 9.12 | m2 |
| 23 | 23 | 10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. | Anx-A_23 | 268.7 | m2 |
| 24 | 24 | B) On fair side (backing coat 10 mm and finishing coat 10mm thick) | Anx-A_24 | ||
| 25 | 25 | 1:3 1x268.70 | Anx-A_25 | 268.7 | m2 |
| 26 | 26 | (A) Supplying, mixing, laying and applying the following waterproofing systems over Raft slabs, Roof slabs, Terraces etc. including curing complete as specified and directed by the Department at all levels.:\n (i) 1mm thick single coat of Master Crete M-81 of Choksey Chemicals /Dr. Sealkit Sealcrete (Asian Chemicals)/ mixed with cement in the ratio 1:2 as a prime coat.\n (ii) 3mm thick Polymer modified mortar - Cement sand mortar (in prop 1:3) mixed with Master Crete M-81/Dr. Sealkit Sealcrete (Asian Chemicals) @ 15% by weight of cement.\n (iii) 1mm thick coat of Master Crete M-81 /Dr. Sealkit Sealcrete (Asian Chemicals) mixed with cement in the ratio 1:2 as final coat. | Anx-A_26 | 268.75 | m2 |
| 27 | 27 | Supplying, providing, mixing and laying over waterproofing layers/ coatings with concrete screed of average 30mm thick or as per drawings/ requirements in proportion 1:2:4 (1cement : 2fine aggregate : 4coarse aggregate) (by volume) with 10mm and down well graded aggregates and admixed with a normal plasticizer like Master Plast PL-1 of Choksey Chemicals /Dr. Sealkit Normal Plast (Asian Chemicals)/Rheomac 707 of BASF @ 0.3% by weight of cement and thereafter scoring the top surface of the concrete screed @ 200mm c/c as specified and directed by the Department. | Anx-A_27 | 268.75 | m2 |
| 28 | 28 | Providing surface preparation for walls, celling etc.using average 1.50 mm thick plaster of paris including clearing, rubbing with sand paper, filling gaps, depression etc. where necessary, with chalk powder and and plaster of paris paste, making the surface even and smooth complete at all levels as specified and directed. | Anx-A_28 | 1608.41 | m2 |
| 29 | 29 | Providing two coats of Birla White Wall Care Putty (Water Resistant White Cement based putty for concrete/ mortar walls and ceiling both internal and external) after removing all loosely adhering material from the wall surface with the help of emery stone, putty blade or wire brush and moistening the wall with sufficient quantity of clean water as specified and directed by the department. (Total thickness of two coats is maximum 1.5mm) | Anx-A_29 | 1608.41 | m2 |
| 30 | 30 | Wall painting (two coats) with Plastic emulsion paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. | Anx-A_30 | 1608.41 | m2 |
| 31 | 31 | Extra over item no 13.4.7 above for every subsequent coat of wall painting with Plastic Emulsion Paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac). | Anx-A_31 | 1608.41 | m2 |
| 32 | 32 | Applying priming coat over new wood and wood based surfaces over 100mm in girth/width after and including preparing the surface by throughly cleaning oil, grease, dirt snd other foreign matter , sand papering and knotting. | Anx-A_32 | 44.16 | m2 |
| 33 | 33 | Painting two coats (excluding priming coat) on new wood and wood based surface with enamel paint of approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter sand papering and stopping. | Anx-A_33 | 44.16 | m2 |
| 34 | 34 | Extra over item no13.6.5and 13.6..6 for every subsequent coat of paint. | Anx-A_34 | 44.16 | m2 |
| 35 | 35 | Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. | Anx-A_35 | 161.68 | m2 |
| 36 | 36 | Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. | Anx-A_36 | 161.68 | m2 |
| 37 | 37 | Applying one self-priming coat of acrylic emulsion coating of Unicem \"Rakshak\" brand by thinning 1ltrs of paints with 1ltrs of water over freshly plastered wall surface after throughly brooming the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth as specified and directed by the department. | Anx-A_37 | 1608.41 | m2 |
| 38 | 38 | Finishing wall with two coats of acrylic emulsion exterior coatings of Unicem \"Rakshak\" brand of required shade by thinning 1ltr. of paint with 750ml of water to give an even shade after throughly brooming the surfaces to remove all dirt and remains of loose powdered materials as specified and directed by the department. | Anx-A_38 | 1608.41 | m2 |
| 39 | 39 | Providing drain with brick work in cement mortar in proportion 1:5 with half brick thick side walls and 100mm thick C.C (1:3:6) base over one brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. | Anx-A_39 | 90 | m |
| 40 | 40 | Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. | Anx-A_40 | 30.37 | m3 |
| 41 | 41 | Providing plinth protection with bricks laid on edge and grouted with cement mortar 1:4 and finishing with cement pointing in prop. 1:1 complete. | Anx-A_41 | 67.5 | m2 |
| 42 | 42 | D. Applying Epoxy based bonding agent Master Bond EP of Choksey /Concresive 1414 of BASF/Dr. Sealkit Bond OTN (Asian Chemicals) after totally saturating the cleaned concrete surface with clean water for proper bonding of old and new concrete. | Anx-A_42 | 268.75 | m2 |
| 43 | 43 | Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI Mark, and CO2 Cylinder will be confirming to IS: 4947 with ISI Mark, Powder will be confirming to IS: 2878 with ISI Mark (Extinguisher will be TROLLEY MOUNTED)(25 KG)\n BRAND : FIRESTOP / FIREND / FIRE SHIELD | Anx-A_43 | 2 | Nos. |
| 44 | 44 | Supplying and laying of permanent wall finish for interior and exterior walls with surface coating of Heritage Surface Texture of Bakelite Hylam Limited for all types of buildings at all levels as specified and directed by the department. | Anx-A_44 | 1608.41 | m2 |
| 45 | 45 | Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. | Anx-A_45 | 9 | m2 |
| 46 | 46 | SANITARY & WATER SUPPLY WORKS : | Anx-B_1 | ||
| 47 | 47 | Providing fitting and fixing Vitreous china wall hung water closet (European type W.C pan 400mm high) with seat and lead ,CP brass hinges and rubber buffers , CI/MS brackets , 40 mm dia flush band with fittings including painting of fittings and brackets, required. (Flushing Cistern to be paid separately) | Anx-B_2 | 2 | Each |
| 48 | 48 | Supplying, fiting and fixing concealed cistern with all internal fittings with CI brackets including fitting and fixing standard size CP flush pipe, union clamps etc. compete as directed and specified (pipes will be measured separately) | Anx-B_3 | ||
| 49 | 49 | 1x1x2 = 2 Nos. | Anx-B_4 | ||
| 50 | 50 | (B) Hindware Make | Anx-B_5 | ||
| 51 | 51 | (i) Concealed Cistern 83mm with Prime flush plate 83mm | Anx-B_6 | 2 | Each |
| 52 | 52 | Providing fitting and fixing vitreous china flat back type lipped front urinal basin of with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. | Anx-B_7 | ||
| 53 | 53 | 1x1x2 = 2 Nos. | Anx-B_8 | ||
| 54 | 54 | C) Jaquar make | Anx-B_9 | ||
| 55 | 55 | a) White | Anx-B_10 | ||
| 56 | 56 | (i) Urinal (Cat. No.URS-WHT-0704) with Sensor (Cat. No.SNR-CHR-51097) | Anx-B_11 | 2 | Each |
| 57 | 57 | Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) | Anx-B_12 | ||
| 58 | 58 | 1x2x2 = 4 Nos. | Anx-B_13 | ||
| 59 | 59 | (B) Hindware Make | Anx-B_14 | ||
| 60 | 60 | (a) White | Anx-B_15 | ||
| 61 | 61 | (iv) Deimos 640 x 420 (Cat. No.10094/11037) | Anx-B_16 | 4 | Each |
| 62 | 62 | Providing fitting and fixing Decorative Mirror complete as directed and specified. | Anx-B_17 | ||
| 63 | 63 | 1x2x2 = 4 Nos. | Anx-B_18 | ||
| 64 | 64 | (A) Parryware Make | Anx-B_19 | ||
| 65 | 65 | (a) Size 800mm x 600mm | Anx-B_20 | 4 | Each |
| 66 | 66 | Providing fitting and fixing Glass Shelf complete as directed and specified. | Anx-B_21 | ||
| 67 | 67 | 1x2x2 = 4 Nos. | Anx-B_22 | ||
| 68 | 68 | (i) Agmeco make | Anx-B_23 | ||
| 69 | 69 | (a) Cubin (Cat. No.CB-00104) | Anx-B_24 | 4 | Each |
| 70 | 70 | Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. | Anx-B_25 | ||
| 71 | 71 | 1x1x2 = 2 Nos. | Anx-B_26 | ||
| 72 | 72 | (a) Parryware Make | Anx-B_27 | ||
| 73 | 73 | (i) Recess SP & SG dish (Cat.No. C9935) | Anx-B_28 | 2 | Each |
| 74 | 74 | Providing, fitting and fixing CP towel rail complete as directed and specified. | Anx-B_29 | ||
| 75 | 75 | 1x1x2 = 2 Nos. | Anx-B_30 | ||
| 76 | 76 | (b) Sona make | Anx-B_31 | ||
| 77 | 77 | (x) Towel rail with hook 900mm long (Cat.No.TR-0606) | Anx-B_32 | 2 | Each |
| 78 | 78 | Providing, fitting and fixing Chrome Plated towel ring complete as directed and specified. | Anx-B_33 | ||
| 79 | 79 | 1x2x2 = 4 Nos. | Anx-B_34 | ||
| 80 | 80 | (c) Agmeco Made | Anx-B_35 | ||
| 81 | 81 | (d) Cera make (cat.No.CA 102) | Anx-B_36 | 4 | Each |
| 82 | 82 | Providing, fitting and fixing Chrome Plated tumbler holder complete as directed and specified. | Anx-B_37 | ||
| 83 | 83 | 1x2x2 = 4 Nos. | Anx-B_38 | ||
| 84 | 84 | (b) Agmeco make | Anx-B_39 | ||
| 85 | 85 | (c) Cera make (cat.No.CA 104) | Anx-B_40 | 4 | Each |
| 86 | 86 | Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. | Anx-B_41 | ||
| 87 | 87 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | Anx-B_42 | ||
| 88 | 88 | i) 110mm dia. | Anx-B_43 | 165 | RM |
| 89 | 89 | ii) 75mm dia. | Anx-B_44 | 138 | RM |
| 90 | 90 | Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-B_45 | ||
| 91 | 91 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | Anx-B_46 | ||
| 92 | 92 | i) 110mm dia | Anx-B_47 | 6 | Each |
| 93 | 93 | ii) 75mm dia. | Anx-B_48 | 3 | Each |
| 94 | 94 | Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-B_49 | ||
| 95 | 95 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | Anx-B_50 | ||
| 96 | 96 | ii) 110mm dia. | Anx-B_51 | 4 | Each |
| 97 | 97 | ii) 75mm dia | Anx-B_52 | 2 | Each |
| 98 | 98 | Supplying fiting and fixing PVC single tee with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. | Anx-B_53 | ||
| 99 | 99 | 1x2x12 = 24 Nos. | Anx-B_54 | ||
| 100 | 100 | b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. | Anx-B_55 | ||
| 101 | 101 | i) 110mm dia. | Anx-B_56 | 24 | Each |
| 102 | 102 | Supplying fitting and fixing wall mounted / floor mounted shower enclosure of Jaquar make of following trade name complete as directed. | Anx-B_57 | ||
| 103 | 103 | 1x1x2 = 2 Nos. | Anx-B_58 | ||
| 104 | 104 | a) Kretana 1000x1000x1850 mm | Anx-B_59 | 2 | Each |
| 105 | 105 | Providing fitting & fixing stainless steel kitchen sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately | Anx-B_60 | ||
| 106 | 106 | 1x1x2 = 2 Nos. | Anx-B_61 | ||
| 107 | 107 | (A) Parryware Make | Anx-B_62 | ||
| 108 | 108 | (i) Single Bowl with Veg Bowl & Drain Board (400 x 200) Flat Edge- Glossy (Cat.No.C8545) | Anx-B_63 | 2 | Each |
| 109 | 109 | Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table. | Anx-B_64 | 9.3 | Each |
| 110 | 110 | Providing fitting and fixing 450mm dia. 90mm thick C.I. Man hole cover and frame of 58 Kg. weight complete as directed and specified. | Anx-B_65 | 2 | Each |
| 111 | 111 | Clearance of service septic tank and removing the night soil and debris etc. manually from the tank/chamber to a distant place preferably during holidays or at night by bailing out the deposited night soil,buring the same in near by trenches/pits which has been dug earlier and covering the same.The service septic tank is cleaned with clear water and completed as directed by the Department. | Anx-B_66 | ||
| 112 | 112 | 1x1x1 = 1 Nos. | Anx-B_67 | ||
| 113 | 113 | (a) For 200 users | Anx-B_68 | 1 | Each |
| 114 | 114 | Supplying fitting and fixing G.I. Pipes of following sizes, with all necessary 'R' brand or similar approved G.I. Fittings such as bend, tee, elbow, reducer, nipple, plug, long screw fitting, H.W. clamps etc.complete at all levels including below G.L. as directed and specified. | Anx-B_69 | ||
| 115 | 115 | 1x1x186.00 = 186.00m | Anx-B_70 | ||
| 116 | 116 | c) 32 mm dia (Medium) | Anx-B_71 | ||
| 117 | 117 | i) Using Tata make | Anx-B_72 | 186 | RM |
| 118 | 118 | e) 20mm dia (Medium) | Anx-B_73 | ||
| 119 | 119 | i) Using Tata make | Anx-B_74 | 256 | RM |
| 120 | 120 | f) 15 mm dia (Medium) | Anx-B_75 | ||
| 121 | 121 | i) Using Tata make | Anx-B_76 | 1320 | RM |
| 122 | 122 | Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) | Anx-B_77 | ||
| 123 | 123 | 1x1x12 = 12 Nos. | Anx-B_78 | ||
| 124 | 124 | Jaquar | Anx-B_79 | ||
| 125 | 125 | (i)15mm dia Male / Female (long thread) | Anx-B_80 | 12 | Each |
| 126 | 126 | Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. | Anx-B_81 | ||
| 127 | 127 | 1x1x8 = 8 Nos | Anx-B_82 | ||
| 128 | 128 | Jaguar make | Anx-B_83 | ||
| 129 | 129 | (a) Continental | Anx-B_84 | 8 | Each |
| 130 | 130 | Supplying fitting and fixing Chrome Plated (C.P.) flush cock of approved brand as directed and specified.(G.I. & C.P pipes will be measured and paid separately) | Anx-B_85 | ||
| 131 | 131 | 1x1x3 = 3 Nos. | Anx-B_86 | ||
| 132 | 132 | Agmeco brand | Anx-B_87 | ||
| 133 | 133 | b) Flush cock Heavy duty Cat No.00507 | Anx-B_88 | 3 | Each |
| 134 | 134 | Supplying fitting and fixing Pipes with all necessary fittings in exposed or in trenches including trenching and refilling the same etc complete as directed | Anx-B_89 | ||
| 135 | 135 | 1x2x120.00 = 240.00m | Anx-B_90 | ||
| 136 | 136 | A) G.I. pipe with GI fittings | Anx-B_91 | ||
| 137 | 137 | a) TATA / SAIL (Medium) | Anx-B_92 | ||
| 138 | 138 | vi) 50mm diameter | Anx-B_93 | 240 | RM |
| 139 | 139 | Supplying fitting and fixing GI filter 2.00 metre long. | Anx-B_94 | 1 | Each |
| 140 | 140 | Supplying fitting and fixing check valve (non return valve) including thread to pipes. | Anx-B_95 | ||
| 141 | 141 | 1x1x2 = 2 Nos. | Anx-B_96 | ||
| 142 | 142 | iv) 50mm diameter | Anx-B_97 | 2 | Each |
| 143 | 143 | Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock, pipe connection etc.with a free maintenance period of six monthhs | Anx-B_98 | ||
| 144 | 144 | 1x1x1 = 1 No | Anx-B_99 | ||
| 145 | 145 | (IV) 10000 liters capacity | Anx-B_100 | ||
| 146 | 146 | (b) 6 mm thick Vessel | Anx-B_101 | 1 | Each |
| 147 | 147 | Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes | Anx-B_102 | ||
| 148 | 148 | 1x1x1 = 1 No | Anx-B_103 | ||
| 149 | 149 | 2000 Lt capacity | Anx-B_104 | ||
| 150 | 150 | (a) Sintex make | Anx-B_105 | 1 | Each |
| 151 | 151 | Labour for erecting and placing PCVC Tank over the stagging up to a height of 5.00m complete as directed. | Anx-B_106 | ||
| 152 | 152 | 1x1x1 = 1 No | Anx-B_107 | ||
| 153 | 153 | (a) 2000 litre capacity | Anx-B_108 | 1 | Each |
| 154 | 154 | Suits Electricals | Anx-C_1 | ||
| 155 | 155 | INTERNAL WIRING | Anx-C_2 | ||
| 156 | 156 | A.(i) WIRING | Anx-C_3 | ||
| 157 | 157 | Wiring for circuit wiring with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. | Anx-C_4 | ||
| 158 | 158 | With 2 x 1.5 sq. mm. cable in 20 mm dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | Anx-C_5 | 200 | Metre. |
| 159 | 159 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) including earth continuity in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system . | Anx-C_6 | ||
| 160 | 160 | With 3 x 6 sq. mm. + Earth continuity with2x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | Anx-C_7 | 20 | Metre. |
| 161 | 161 | With 3 x 10 sq. mm. + earth continuity with2x 6 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | Anx-C_8 | 10 | Metre. |
| 162 | 162 | Wiring for light/fan/call bell point with 2x1.5 sq. mm. P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed conduit wiring system with 20mm dia 2mm thick / heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) complete | Anx-C_9 | ||
| 163 | 163 | Medium point up to 6.00 metre. Length. | Anx-C_10 | 24 | Each |
| 164 | 164 | Long point up to 10.00 metre. Length. | Anx-C_11 | 20 | Each |
| 165 | 165 | Wiring to 5 a pin 6 Amps plug point with 1.5 sq. mm P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed 2 mm thick/ heavy rigid ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system including earth continuity with 1.5 sq. mm. cable to third pin of the plug socket etc. as required complete. | Anx-C_12 | ||
| 166 | 166 | Long point up to 10.00 metre. Length. | Anx-C_13 | 2 | Each |
| 167 | 167 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) including earth continuity in surface/ recessed 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit wiring system. | Anx-C_14 | ||
| 168 | 168 | With 2 x 2.5 sq. mm. + earth continuity with 1x1.5 sq. mm. in 20 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | Anx-C_15 | 200 | Metre. |
| 169 | 169 | With 2 x 6 sq. mm. + earth continuity with 1x 4 sq. mm. cable in 25 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | Anx-C_16 | 160 | Metre. |
| 170 | 170 | Wiring for drawing sub-main line with P.V.C. insulated single core unsheathed industrial (Multistrand) cable FR conforming to IS-694: 1990 with flexible bright annealed electrolytic copper conductor for voltage grade up to 1100 volts (Finolex /RR Kabel /Nicco / Anchor or Equivalent Make as approved by the Deptt.) in surface/ recessed PVC 20 mm. dia. 2mm thick/ heavy ISI marked IS: 9537 PART - III rigid PVC conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) wiring system. | Anx-C_17 | ||
| 171 | 171 | With 4 x 10 sq. mm. + earth continuity with 2x6 sq. mm. cable in 40 mm. dia. 2mm thick/ heavy rigid PVC IS: 9537 Part - III conduit. | Anx-C_18 | 20 | Metre. |
| 172 | 172 | (ii)CONDUIT LAYING | Anx-C_19 | ||
| 173 | 173 | Supply and fixing 25 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: | Anx-C_20 | 200 | Metre |
| 174 | 174 | Supply and fixing 32 mm dia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: | Anx-C_21 | 50 | Metre |
| 175 | 175 | Supply and fixing 38 mmdia 2.00mm average wall thickness heavy rigid PVC IS: 9537 Part - III conduit (Berlia/ AKG / Precision/ Presto Plast/Polycab/ MW or equivalent make as approved by the Deptt.) in recessed system including cutting the wall and making good the same as required: | Anx-C_22 | 20 | Metre |
| 176 | 176 | Supplying and fixing 18 S.W.G sheet steel metal boxes of the following sizes in surface Wiring system with suitable size of 3 mm thickness phenolic laminated sheet cover on the front face of the boxes including painting etc. as required and specified by the department. | Anx-C_23 | ||
| 177 | 177 | 250 mm x 300 mm x 60 mm deep (Nominal size | Anx-C_24 | 12 | Each |
| 178 | 178 | B. DISTRIBUTION | Anx-C_25 | ||
| 179 | 179 | Supplying with fitting and fixing sheet steel, phosphatised, powder painted dust & vermin proof Double door IP-43 double door surface mounting vertical TPN MCB DB incorporated with bas-bar 125A, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. complete with making necessary connection as approved, specified and directed by the deptt. | Anx-C_26 | ||
| 180 | 180 | ABB, Schneider MG, legrand, Hager make) | Anx-C_27 | ||
| 181 | 181 | 4 way TPN (8+12) double door | Anx-C_28 | 1 | Each |
| 182 | 182 | Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-C_29 | ||
| 183 | 183 | B Series\n(Schneider MG, legrand, Hager make) | Anx-C_30 | ||
| 184 | 184 | 6 to 32A | Anx-C_31 | 8 | Each |
| 185 | 185 | C Series\n(Schneider MG, legrand, Hager make) | Anx-C_32 | ||
| 186 | 186 | 6 to 32A | Anx-C_33 | 4 | Each |
| 187 | 187 | Supplying with fitting and fixing 4P 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as approved, specified and directed by the deptt. | Anx-C_34 | ||
| 188 | 188 | B Series (Schneider MG, legrand, Hager make) | Anx-C_35 | ||
| 189 | 189 | 40A | Anx-C_36 | 2 | Each |
| 190 | 190 | C: SWITCH & SOCKETS & A.C STARTER | Anx-C_37 | ||
| 191 | 191 | Supplying including and fixing of following Metal boxes for MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) in surface/ recessed system complete as per direction of department. | Anx-C_38 | ||
| 192 | 192 | 1-2 module type Metal | Anx-C_39 | 8 | Each |
| 193 | 193 | 3 module type Metal | Anx-C_40 | 6 | Each |
| 194 | 194 | 4 module type Metal | Anx-C_41 | 2 | Each |
| 195 | 195 | 8 module type Metal | Anx-C_42 | 2 | Each |
| 196 | 196 | 12 module type Metal | Anx-C_43 | 4 | Each |
| 197 | 197 | Supplying including fitting fixing of following MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) front plate of suitable colour as per direction of department. | Anx-C_44 | ||
| 198 | 198 | 2 module | Anx-C_45 | 8 | Each |
| 199 | 199 | 3 module | Anx-C_46 | 6 | Each |
| 200 | 200 | 4 module | Anx-C_47 | 2 | Each |
| 201 | 201 | 8 module | Anx-C_48 | 2 | Each |
| 202 | 202 | 12 module | Anx-C_49 | 4 | Each |
| 203 | 203 | Supplying with fitting fixing of blank plate single in modular switch system , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_50 | 12 | Each |
| 204 | 204 | Supplying with fitting fixing of 6 amp one way modular clip in bell push MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_51 | 40 | Each |
| 205 | 205 | Supplying with fitting fixing of 16 amp one way modular clip in switch with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_52 | 2 | Each |
| 206 | 206 | Supplying with fitting fixing of 6 amp one way modular clip in bell push with LED, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_53 | 2 | Each |
| 207 | 207 | Supplying including installation of socket outlet 10/16 Amps 3/5 pin combine shuttered complete , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_54 | 12 | Each |
| 208 | 208 | Supplying including fitting and fixing of TV SOCKET, MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_55 | 2 | Each |
| 209 | 209 | Supplying with fitting and fixing of 25A Modular Motor Starter 2M , MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_56 | 4 | Each |
| 210 | 210 | Supplying with fitting and fixing of 120 watt electronic modular STEP speed control 2 - module type MODEL RANGE LEGRAND (ARTEOR), ANCHOR (AVE), MK (BLENZE), SCHNEIDER (ZENSELO), CRABTREE(MURANO) including making necessary connection as per direction of department. | Anx-C_57 | ||
| 211 | 211 | 120 watt electronic modular step speed control 2 - module type | Anx-C_58 | 8 | Each |
| 212 | 212 | Supplying with fitting and fixing of LED Foot lamp with Box MODEL RANGE LEGRAND (MYRIUS), ANCHOR (VIOLA), MK (WRAPAROUND/ PLUS), ABB (CHEIRON), KOLORS (KREST), SCHNEIDER (VIVACE), CRABTREE including making necessary connection as per direction of department. | Anx-C_59 | 4 | Each |
| 213 | 213 | D: FIXTURES AND FITTING | Anx-C_60 | ||
| 214 | 214 | Supplying and fitting fixing of electric storage water heater [Geyser] of AOS-Jaquar make) including necessary connection etc. as required complete and as directed by the Department. | Anx-C_61 | ||
| 215 | 215 | 15 Litre Capacity (Digital model) | Anx-C_62 | 2 | Each |
| 216 | 216 | Supplying including fitting fixing of following star rated A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connection cable, as approved by the Deptt.s etc. as required complete and as directed by the Department [Without regulator]. (ORIENT PSPO make / Usha make/ CROMPTON make/ Havells/ ATC/ V GAURD make) | Anx-C_63 | ||
| 217 | 217 | Energy efficient 5-star 1200 mm sweep Fusion 5 star (Havells or equivalent make) | Anx-C_64 | 8 | Each |
| 218 | 218 | Compact and Sleek Channel type CFL luminaries in white epoxy power coated finish and Decorative click fit end caps and Electronic ballast with 1 X 36 W CFL(Crompton Greaves make Model- TAK 36 EB e-AKTIV or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent PHILIPS/ WIPRO/ BAJAJ/ Havells/ HPL/ SOLAR/ JAQUAR make). | Anx-C_65 | 10 | Each |
| 219 | 219 | FBH 145 M 2 X PL-C/ 2P 18 WI 240V LH Phillip make recessed low glare down lighter inclusive of enclosed control gear box and matt finish reflector including lamp. Or equivalent (Equivalent will be selected by the deptt considering the mother items rate) (equivalent WIPRO/ JAQUAR make). | Anx-C_66 | 49 | Each |
| 220 | 220 | Supplying including fitting fixing of following A.C. Exhaust fan in the existing hole on the wall of following sweeps with making necessary connection as approved by the Deptt.)as required complete and as directed by the Department. | Anx-C_67 | ||
| 221 | 221 | Domestic | Anx-C_68 | ||
| 222 | 222 | High Speed 225 mm sweep (ORIENT make), Trans Air 225 mm sweep (Crompton make), Ventil Air DX 250 mm sweep Louver type (Havells make) | Anx-C_69 | 2 | Each |
| 223 | 223 | Exhaust fan | Anx-C_70 | ||
| 224 | 224 | Numbering of ceiling fans/exhaust fans as required | Anx-C_71 | 8 | Each |
| 225 | 225 | AC 1.5 TON | Anx-C_72 | 4 | Each |
| 226 | 226 | E: CABLING | Anx-C_73 | ||
| 227 | 227 | Supply and laying of following size PVC/XLPE insulated and PVC sheathed 1.1 KV G Solid Aluminium conductor up to 10 sq mm balance stranded conductor, XLPE Insulated, cores laid up, PVC tape inner sheathed, Armour (Aluminium for single core up to 70 sq mm balance Aluminium strip, Galvanised for cables up to 2x10 sq mm.3x10 sq mm,4x6 sq mm balance all galvanised steel strip) , extruded PVC Type ST2 sheathed, 650/1100V grade as per IS 7908(Part 1) 1988 armoured U.G. cable U.G. cable laid in ground/partially in air (as required for termination over ground including excavation of cable trench up to depth of 75cm, refilling, protective brick covering, Sand cushioning etc complete handling of surplus spoil, debris et to proper place as specified and directed by the deptt. (Nicco/ Havells/ RPG/CCI/Polycab/Gloster/ Finolex make) . | Anx-C_74 | ||
| 228 | 228 | 16.00 Sq. mm.4 Core armoured U.G. cable | Anx-C_75 | 32 | Metre |
| 229 | 229 | F: EARTHING | Anx-C_76 | ||
| 230 | 230 | Supply with installation & commissioning of readymade maintenance free CPRI approved technology G.I. CHEMRODE ELECTRODE complete with RESLOW Grounding Minerals (25 K and Advance Earth Pit cover (PV including excavation of earth pit and construction brick earth chamber including plastering both inner & outer surface of brick wall as specified and directed by the deptt. | Anx-C_77 | 2 | Each |
| 231 | 231 | Supplying & laying of 8 SWG Copper earth drawn through 15 mm dia. Medium quality G.I. pipe from Earth Electrode (below G.L.) to electrical switch gears or electrical machineries including making necessary connection as approved, specified and directed by the deptt. | Anx-C_78 | 100 | Metre. |
AI Tender Summary
Tender Timeline
Nov 04, 2019
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2019
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 25, 2019
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender