Sales : +91-777 804 8217
| Name of Work: Construction of control room building with electrification, Septic Tank with sewage line arrangements, Providing foundation concrete for structures and equipment plinths, retaining wall around the yard, Cable duct,water line arrangements ,Bore well and fencing works and supplying, fabrication and erection of Steel structures, paintings, Earthing steels,Providing earth bores, Erection of Department materials and equipments,Finish coat painting, Supply & erection of Station accessories for the establishment of 33/11 KV SS at Nagarapatty in Pudukottai District | |||||
|---|---|---|---|---|---|
| Sl.No. | Item Description | Item Code / Make | Quantity | Units | |
| 1 | 1 | Civil Works:-Clearing Scrub jungles with uprooting and disposed from the site as per the direction of site engineer including cost of all labour, lead, lift, etc., complete | 2510 | Sqm | |
| 2 | 2 | Site grading and levelling and sectioning by earth moving machineries | 2510 | Sqm | |
| 3 | 3 | Collection, supplying, stacking and spreading of hill earth with compacted by power roller including cost of all materials lead lift labour etc complete as per the direction of site engineer. | 1450 | Cum | |
| 4 | 4 | Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete. | 923 | Cum | |
| 5 | 5 | Providing anti termite treatment in 4 stages I) immediate after earth work excavation and before laying foundation concrete II) after refilling for sides of foundation III) Before laying of flooring concrete IV) outside of basement upto 1.0m alround the buildingusing termite 250ml for 5lit of water etc. complete. | 410 | sqm | |
| 6 | 6 | Supplying and filling with M-Sand for foundation including cost of sand, all labour, lead,lift, consolidation etc. complete. | 215 | Cum | |
| 7 | 7 | PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out form work including cost of all labour, materials, lead, lift, curing, etc., complete. | 135 | Cum | |
| 8 | 8 | RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column raft foundation without formwork including cost of all materials, labour lead, litf, etc., complete. | 146 | Cum | |
| 9 | 9 | RCC 1:1.5:3 using 12 to 20mm (machine crushed) metal for column concrete with formwork including cost of all materials, labour lead, litf, etc., complete. But excliding cost fo steel reinforcement (by using mixer machine). | 24 | Cum | |
| 10 | 10 | RCC. 1:1 1/2:3 mix using 12 mm to 20mm HBS metal(machine crushed) for Gradebeam / plinth beam with formwork including cost of all labour, materials, lead, lift, etc, complete. But excliding cost fo steel reinforcement (by using mixer machine). | 67 | Cum | |
| 11 | 11 | RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for continous lintelwith formwork including cost of all materials, lead, lift, etc., complete.(by using mixer machine). | 6 | Cum | |
| 12 | 12 | RCC 1:1 1/2:3 mix using 12 to 20mm HBS metal (machine crushed) for Sun shade 90/60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, labour, leas, lift, etc., complete. (by using mixer machine). | 1.65 | Cum | |
| 13 | 13 | RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal for \" T \" beam, bed block with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement(Roof beam) | 14 | Cum | |
| 14 | 14 | RCC 1:1 1/2:3 using 12mm to 20 mm HBS metal (machine crushed) for roof slab concrete of 125 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement. | 24 | Cum | |
| 15 | 15 | Providing RCC 1:11/2:3 using 12-20mm graded hard machine broken granite stone with 100mm thick, including cost of all materials without form work, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Flooring concrete. | 20 | Cum | |
| 16 | 16 | RCC 1:1.5:3 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For precast cover slab concrete. | 23 | Cum | |
| 17 | 17 | RCC 1:1.5:3, using 20mm HBG metal for cable duct side wall with form work including cost of cement, all materials, labour, lead, lift, etc. complete. | 235 | Cum | |
| 18 | 18 | Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete. | 53300 | Kg | |
| 19 | 19 | Supply ,Labour charges for fabrication, fixing in position of 90LBS MS rail with proper anchorage by using welding and cutting to the required size and length anf fixing over transformer plinth as per departmental specifications including cost of labour, transport, placing in position, lead,lift etc complete. | 540 | kg | |
| 20 | 20 | Brickwork in CM 1:5 mix using bricks of size 9\"x 4 3/8\"x2\"3/4\" for basement , super structure including cost of all materials, labour, lead, lift, curing, etc., complete. By using II class Champer Burnt bricks | 110 | Cum | |
| 21 | 21 | Brickwork in CM 1:3 mix using II class chamber brick of size 9\"x 4 3/8\" x 2 3/4\" for bath, fol, brick on edge, partition wall, including cost of labour materials, curing, lead, lift, etc., complete. | 4 | Cum | |
| 22 | 22 | PCC 1:3:6, using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete. | 53 | Cum | |
| 23 | 23 | PCC 1:2:4, using 20mm HBG metal foundation without form work including cost of cement, all materials, labour, lead, lift, etc. complete. | 49 | Cum | |
| 24 | 24 | PCC 1:2:4, using 20mm HBG metal foundation with form work including cost of cement, all materials, labour, lead, lift, etc. complete. | 208 | Cum | |
| 25 | 25 | PCC 1:2:4, using 20mm HBG metal coping with form work including cost of cement, all materials, labour, lead, lift, etc. complete. | 17 | Cum | |
| 26 | 26 | Labour charges for transporting from casting yard to curing tank,curing tank to cable duct , aligning and laying of RCC pre cast slab as directed by the site engineer including all labour lead lifts etc complete | 374 | Nos | |
| 27 | 27 | Fabrication and Labour charges for fixing of GI angles of 50x50x6mm sizes vertically @ 75cm c/c to the required length for supporting the cable in the cable duct in correct position including labour ,cutting etc., complete as per the drawing and std.specification. | 2200 | kg | |
| 28 | 28 | Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete. | 60 | Rm | |
| 29 | 29 | Providing projected border of 20cm. width for plinth beam in CM. 1:3 20mm thick including cost of all materials, labour, lead, lift, etc., complete. | 60 | Rm | |
| 30 | 30 | Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, litf, etc, complete. | 1500 | Sqm | |
| 31 | 31 | Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, RCC pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete. | 950 | Sqm | |
| 32 | 32 | Supplying and filling stone dust inside the yard as per standard specification including cost of all materilas labour lead lift etc. | 100 | Cum | |
| 33 | 33 | Supply and Spreading of 12-20mm of HB stone inside the yard as per std. spec.including cost of materials ,labour lead,lift etc | 150 | Cum | |
| 34 | 34 | Providing and laying spreading and compacting graded stone aggregates to wet mix macadum 250 mm thick specification including premixing the materials with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site laying in uniorm layers with pavers in sub / base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of materials labour charges rentals for mahinery fuel and all other incidental charges etc. complete as per clause 406 of MOST Rev.5. | 38 | Cum | |
| 35 | 35 | Providing weathering course by providing PCC 1:2:4, 6mm HBG stone chips over a roof slab to thichness of average thickness 8 Cm thick and good quality of readymade Solar reflective tiles/Leak proof tiles of size 305x305x7mm laying over cm 1:3, mixed with crude oil at 10% by weight of cement and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., and including cost of material and labour for applying water proof component over the terrace etc., complete. | 150 | Sqm | |
| 36 | 36 | Providing two coats of white cement based wall putty over the plastered surface including removal of all loosly adhering materials from the wall surface with the help of emery stone,putty blade or wire brush and making the surface in just wet condition as per the specification and approved by the site engineer including cost of all materials, labour, transport,lead etc complete. | 2450 | sqm | |
| 37 | 37 | Painting the inside walls with two coats of interior emulison of approved colour over a primer and wall putty coat of all materials, etc., complete. | 500 | Sqm | |
| 38 | 38 | Colour washing two coats with exterior emusion paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift, etc., complete. | 1466 | Sqm | |
| 39 | 39 | Supplying and fixing of two side polished 20-30mm Thick cuddapah slab for cupboard etc., including cost of all materials, labour, lead, lift, etc., complete | 15 | Sqm | |
| 40 | 40 | Providing shoring and shuttering using CW planks and scantlings including cost of all materials labour lead lift etc. complete | 124 | sqm | |
| 41 | 41 | Dewatering during the earthwork excavation including cost of all material,labour, lead, lift etc., | 40 | Hrs. | |
| 42 | 42 | Refilling with excavated earth other than sand in foundation and sides of masonry, consolidation as per std.specn.with water including all, labour, lead , lift, etc., complete. | 373 | Cum | |
| 43 | 43 | Removing the excess earth to the nearby bund or low laying area instructed by field engineer including all lead, lift, etc., complete. | 552 | Cum | |
| 44 | 44 | Providing inspection chamber for sufficient intervels throughout the line 0.6x0.6m size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. cover at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM1:3 12mm thick and all lead, lift etc.complete. | 7 | Nos | |
| 45 | 45 | Supplying and fixing CI.man hole cover of size 0.60m x 0.60m for inlet and outlet manhole and building outside man hole cover for heavy duty including cost of all materials lead, lifts, labour etc., complete. | 2 | Nos | |
| 46 | 46 | Supplying and laying PVC pipe 110 mm outer dia 6kg/ cm2 ISI make for laying the sewer line including cost of pvc pipe coupling lbour for cutting, laying, fixing and tightening etc including earth work excavation and refilling trench etc complete | 40 | Rm | |
| 47 | 47 | Supplying and fixing of 110mm dia pvc pipe for dispersion trench with slotted holes partly as per drawing including cost of all materials lead, lift etc. Complete. | 7 | Rm | |
| 48 | 48 | Supplying and filling 40mm HBS metal for dispersion trench per standard specification including cost of all materials, lead lift etc. complete. | 11 | Cum | |
| 49 | 49 | Supplying and fixing of 100mm dia PVC pipe, cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5mix plastering 12mm thick including cost of all materials, lead, lift etc. Complete. | 1 | No | |
| 50 | 50 | Finishing the floor with 20mm thick cement concrete using 3 to 10mm stone chippings (Ellis pattern first sort -no sand to be used) with water proof compound for ceiling including cost of all materials, labour, lead, lift etc. complete. | 24 | Sqm | |
| 51 | 51 | Flooring with available sizes of approved quality,design & colour (Johnson or equivalent make) of non-slippery ceramic tiles laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete | 120 | Sqm | |
| 52 | 52 | Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete. | 110 | Sqm | |
| 53 | 53 | Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:2 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, labour, lead, lift, etc. complete. | 28 | Sqm | |
| 54 | 54 | Providing and laying in position of ceramic acid resistant tiles over a bed of 20mm thick CM1:3 including pointed with acid resistant C.M for flooring in battery room, including cost of all materials, Polishing, labour, lead & lift etc. complete. | 67 | Sqm | |
| 55 | 55 | Providing UPVC Door and fixing casement doors fabricated from unplasticized polyvinyl chloride9UPVC) sections .The Profile should be three chamber system which provides high insulation properties with outer frame 60mmx55mm with an outer wall thickness of 2.4mm.The window unit should be designed with all corner joint mired and fusion welded.windows should be steel reinforced with 25x24x25mm steel reinforced with thickness of 1mm to have dimensional stability.The sash should be of 602x102mm. The mullion should be of 60x74mm.The profile should have coextruded seals. | 15 | Sqm | |
| 56 | 56 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. | 21 | Sqm | |
| 57 | 57 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter | 0.7 | Sqm | |
| 58 | 58 | Supply and fixing of solid PVC door with frame made out of rigid thermo vinyl polymer extruded section ofsize 62mmx51mm with 2mm wall thickness,shall be reinforced with special polymeric rods of size 255mmx30mmx25mm and with EPDM gaskets along the frame. The door shutter frame of 40mm thickmade out of one piece moulded rigid thermo vinyl polymer extruded sectionof size 25mmx40mm with 2mm wall thickness is mitered and joinedat corners by stainless steel/ aluminium screws. The infill of the door shutterconsists of a seamless one piece multichamber hollow rigid thermo vinyl polymer sectionof size 762mmx35mm with 1mm wall thickness and with prelaminated glossy finish on either side of door shutter of suitable size including cost of all materials lead lift etc., complete. . | 4 | Sqm | |
| 59 | 59 | Providing and fixing sanitary fitting consisting of Neycer / parryware of oriya patten Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete. | 2 | No | |
| 60 | 60 | Supply and fixing of wash basin of size 560x410mm coloured colour and of approved quality and make[Parryware or equivalent] with 12/15mm dia brass CP pillar tap [waterman], 32mm PVC waste pipe [Kohinoor], 12/15mm CP angle cock [ISI], 15mm brass nipple, 15mm nylon connection [Kohinoor] etc. fixing the basine in the wall with GI/Alu. brackets, giving necessary water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete. | 2 | Set | |
| 61 | 61 | Supplying and fixing of 15mm dia long body brass bibcock, Metro or L&T make with necessary specials including cost of all materials lead, lift, labour etc.,complete. | 5 | Nos | |
| 62 | 62 | Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site. | 1 | No | |
| 63 | 63 | Supplying and fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete. | 1 | Sqm | |
| 64 | 64 | Supplying and sticking the name stickers in doors identifying the rooms including cost of material, labour etc. complete. | 0.4 | Sqm | |
| 65 | 65 | Providing PVC down fall pipe using 110mm dia 4 Kg / sqcm, PVC pipe and pvc clamp line supreme etc, including fixing PVC washer type door bend & shoe, in correct position and connecting from the roof slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers. | 120 | Rm | |
| 66 | 66 | Supplying and fixing black granite stone Engraved Foundation detail and year of construction fixing in wall at entrance for Entrance 900x600 including the cost of all materials, leads, lifts etc., complete | 1 | Set | |
| 67 | 67 | Supplying and laying UPVC pipe 50mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements | 100 | Rm | |
| 68 | 68 | Supplying and laying UPVC pipe 32 mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements | 140 | Rm | |
| 69 | 69 | Supplying and laying UPVC pipe 25 mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements | 120 | Rm | |
| 70 | 70 | Supplying and laying UPVC pipe 20 mm dia to withstand the pressure of 10kg/ cm2 ISI make including cost of pvc pipe coupling labour for cutting laying fixing, tighting etc including earth work excavation and refilling trench etc complete for earth pit water supply arrangements | 105 | Rm | |
| 71 | 71 | Supplying and fixing in position of gun metal gate valve 32mm dia of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site | 2 | Nos | |
| 72 | 72 | Supplying and fixing in position of gun metal gate valve 25mm dia of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site | 2 | Nos | |
| 73 | 73 | Supplying and fixing in position of gun metal gate valve 20mm dia of best quality including cost of materials lead lift labour etc complete.as directed by department Engineer at site | 2 | Nos | |
| 74 | 74 | Supplying and fixing inposition of heavy duty wheel valve 32 mm dia of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements.. | 4 | Nos | |
| 75 | 75 | Supplying and fixing inposition of heavy duty wheel valve 25 mm dia of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements.. | 4 | Nos | |
| 76 | 76 | Supplying and fixing inposition of heavy duty wheel valve 20 mm dia of approved best quality including cost of all special fixtures lead, lift,etc., complete for eath pit water supply arrangements.. | 4 | Nos | |
| 77 | 77 | Providing PVC door bend 50mm dia including fixing in position cost of all materials, labour, lead, lift, etc., complete. | 4 | Nos | |
| 78 | 78 | Supplying and fixing 100 x 75mm PVC floor trap in bath room with one pvc door bend shoe of 50mm.dia including cost of all etc., complete | 4 | Nos | |
| 79 | 79 | Supplying and fixing of PVC end cap of 20mm size of approved quality cost of all materials, labour for laying and making holes, lead, lift, etc., complete for water supply arrangements to earth pit. | 30 | Nos | |
| 80 | 80 | Supplying and fixing of best quality of mirror of size 500 x400mm mirror with soap tray, towel stand, screw and fixing near the wase basin, teak wood round block, including cost of all material, labour, lead, lift, etc, complete. | 2 | Nos. | |
| 81 | 81 | Supply and Filling with gravel for Berms including cost and conveyance of gravel to worksite, laying, handling charges and filling in layers, necessary consolidation and all other incidental charges etc., complete | 11 | Cum | |
| 82 | 82 | Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics film with 20 mm thick to full width and depth of 100mm thick including cost of cutting, cleaning of excess bitumen surface , all materials, labour , curing, all leads, and lifts, etc., complete.as per standard specification. | 120 | Rm | |
| 83 | 83 | Supply and fixing of 50 Sq.mm GI Chain link fencing of 10 gauge with standard width of 1.80m height with 50x5mm GI Flat joint including cost of all material, labour for fixing, transportion, lead, lift, etc., complete. | 310 | Rm | |
| 84 | 84 | Supplying and fixing in position GI Angles 75x75x6 mm over for corner fence post and MS flat 65x65x6mm width for intermediate post including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of GI 175x16mm size bolt, nut and washers of required sizes for holding chain link fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Site Engineer. | 1200 | Kg | |
| 85 | 85 | Supplying and laying 50 mm Dia GI pipe B Class ISI make including cost of GI pipe coupling labour for cutting laying fixing tighting etc including earth work excavation and refilling trench etc complete | 10 | Rm | |
| 86 | 86 | Supplying and fixing in position of MS grill gate and Grill for windows including cost of all materials lead, lift, etc. as per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of enamel paint over with one coat of red oxide. | 450 | Kg | |
| 87 | 87 | Painting with two coats of approved enamel paint over one coat of primer for all M.S door window ,gater etc. including cost of all materilas,labour ,lead and lift etc. Complete as per instructions of site Engineer. | 21 | Sqm | |
| 88 | 88 | Labour charges for transporting aligning and fixing of precast curb stone along the road side directed by the site engineer including all labour for earth work excavation trench of required size and depth, lead, lift etc complete | 150 | Nos. | |
| 89 | 89 | Supplying and fixing of approved quality of stain less steel towel rod of size (2 ft) and fixing the same over teak wood round block and soap tray (Pocelin) in bath room including cost of all materials lead lift labour etc complete as directed by department Engineer at site | 2 | Nos. | |
| 90 | 90 | Provision of conducting Geological survey for bore well by the Government agencies. including soil test,labour etc complete as per the instruction of site engineer | 1 | No | |
| 91 | 91 | Drilling of Borewells anywhere in Tamilnadu including transportation from one place to another within Tamilnadu in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc. By first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia direct or reverse rotary mud circulation method using rotary gs, fuel, labour and drilling bentonite and water required for drilling at site | 160 | Rm | |
| 92 | 92 | Reaming 140/150 mm dia pilot bore to 300mm dia bore as directed by the Engineer at site. | 160 | Rm | |
| 93 | 93 | Supplying and fixing 165 mm dia PVC Plain casing pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of Pvc casing pipe, labour, lead, lifts, etc, complete. | 80 | Rm | |
| 94 | 94 | Supplying and fixing 150 mm dia PVC slotted pipe of superior quality of 6 Kg / Sqcm with sheel thickness of 8mm, including fixing and transporting to the site and cost of PVC slotted pipe, labour, lead, lifts, cost of pebbles and backing of pebbles as per instruction of site engineer etc, complete. | 8 | Hrs. | |
| 95 | 95 | Charges for developing the Borewell with air compressor of 600 CFM capacity (Minimum 8 Hours) including transportation, labour and fuel charges for compressor as directed by TWAD Officers and conducting yield test by ‘V’ notch method. | 80 | Rm | |
| 96 | 96 | Supplying and fixing of 50 mm dia outer HDPE Hose 10 Kg/Sqcm fine tee, flow tee of ISI make with connecting sepcieals for suction including cost of all materials ,labour, lead, lifts, etc, complete. | 160 | Rm | |
| 97 | 97 | Supplying and fixing and erection of 40 mm dia GI pipe 'B' Class in suction and delivery pipe from the Bore including cost of pipe coupling,bend, labour for cutting , threading & fixing wherever necessary. | 64 | Rm | |
| 98 | 98 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated unsheathed SC Cu.Conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box and 5A F.T.switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point (SD No.24) | 29 | Pts | |
| 99 | 99 | Supply and run of 2x1.5 sq.mm (22/0.3) PVC insulated Multistrand unsheathed copper conductor of 1100 V grade. (SD 67) | 50 | Rm | |
| 100 | 100 | Wiring with 2x1.5 sqmm(22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mmx100mmx113mm TW switch box with 3mm thick Hylem sheet cover for 5A 3pin non interlocking Wall socket with 5A Flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point(SD No.38) | 7 | Pts | |
| 101 | 101 | Wiring with 2x4sqmm(56/0.3) PVC insulated SC unsheathed Cu.Conductor cable of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, inflush with wall, with 150mmx100mmx113mm TW switch box with 3mm thick hylem sheet for 15A 3 pin non interlocking Wall socket with 15A Flush type switch with continuous earth wire connection of 14 SWG TC wire,and making good of the concealed portion,with suitable colour for concealed power plug point(SD No.40) | 4 | Pts | |
| 102 | 102 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work. (SD 167) | 2 | Set | |
| 103 | 103 | Supply and fixing of 32 A TPNMC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD 158) | 2 | Nos | |
| 104 | 104 | Supply and fixing of 20W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting(SD 88). | 21 | Nos | |
| 105 | 105 | Supply and fixing of 4'40 W Twin type LED Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit pipe suspension, with PVC unsheathed copper leads from the termi | 4 | Nos | |
| 106 | 106 | Supply and fixing of WT bulkhead fitting with guard (Philips/Bajaj/Crompton/K.Lite) suitable for 11W CFL/LED lamp with CFL.(SD.No.83) | 8 | Nos | |
| 107 | 107 | Supply and fixing of 11 W CFL for BH point. (SD 80) | 6 | Nos | |
| 108 | 108 | Supply and fixing of 1200 mm sweep(56\") AC ceiling fan complete with stepped electronic 300 W regulator with 1metre down rod on the existing clamp(SD.No.110) | 5 | Nos | |
| 109 | 109 | Supply and fixing of 450mm (l8\") sweep (lightduty) AC Exhaust fan complete without provision of hole in the wall(SD No.119) | 2 | No | |
| 110 | 110 | Supplying and fixing of RCCB safe trip of appd LEGRAND , ISI make , 25amps with suitable box including cost of all materials labour, lead, lift, etc., complete as per standard specification. | 1 | No | |
| 111 | 111 | Supply and fixing of Horizontal type 4way triple pole neutral MCB distribution board in sheet steel enclosure Double door(Metal) with 40A 4pole MCB isolater as in coming and12Nos.6A to 32A SP MCB as out going in flush with wall and making good of the concealed portion with earth connection.TheMCBDBandMCB's should be with the ISI mark (like standard make)(SD No.179) | 1 | No | |
| 112 | 112 | Earthing as per the ISI specification with an earth electrode of 2.1 mt class'B' GI pipe of dia not less than 32mm,with copper earth plate of size 125mmx50mmx6mm,with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry (SD No.234) | 3 | Nos | |
| 113 | 113 | Labour charges for laying of 4x6 sqmm LTUG cable approved make including earth work excavation for laying of cable and all connected works, cost of all material labour lead lifts etc complete..(cable supplied by Board at free of cost ) | 100 | Rm | |
| 114 | 114 | Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete. | 2 | Nos | |
| 115 | 115 | S&F of 3 phase 5HP Submersible/compresor pump with motor and accessories of approved make of including cost of all materials,labour transport,lead,lift etc with mounting platform & foot valve arrangement and 3 phase 15 amphs of approved make of starter arragements etc complete | 1 | Set | |
| 116 | 116 | Wiring with two pair copper telephone cable in suitable conduit pipe in wall and terminated with socket for telephone jack with TW switch box in flush with wall covered with hylum sheet of 3mm thick for telephone point | 1 | No | |
| 117 | 117 | Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work,with earth connections. (SD 175) | 1 | Set | |
| 118 | 118 | Supplying and fixing of 1 x 48 W LED Street light fittings including cost of all materials, labour, lead, lift etc., complete, as per standard specification. | 6 | Nos | |
| 119 | 119 | Supply and fixing of Horizontal type 4way triple pole neutral MCB distribution board in sheet steel enclosure Double door(Metal) with 40A 4pole MCB isolater as in coming and12Nos.6A to 32A SP MCB as out going in flush with wall and making good of the concealed portion with earth connection.TheMCBDBandMCB's should be with the ISI mark (like standard make)(SD No.179) | 1 | No | |
| 120 | 120 | Supplying and fixing musical quartz type LED Wall Clock showing the time with date and day of size 45 x30 cm of approved quality such as Ajantha / Seiko/ Citizen etc including transport, fixing charges etc complete. | 1 | No | |
| 121 | 121 | Supplying bucket 2 Nos(big size 15 Liters), mug -4 Nos(2 Liters), Floor mat(1000x500mm) of approved make and quality including cost of all materilas lead lift etc | 1 | Set | |
| 122 | 122 | Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., completeSteel half bench a) S Type chair with nylon seated - 3 Nos b)Steel side rack open type 36''x15''x18''- 1 No c)Steel half bench- 1 No d) steel stool - 1 No e)Steel Table 45''x24''x30'' - 1 No f)PVC armed Chair of reputed make-3 Nos | 1 | Set | |
| 123 | 123 | Electrical Works:- Supply of various types of steels including Cost of steel, Freight &Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint and first finishing coat of Aluminium Paint / Enamel Paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables, and as directed by the field Engineer at the SS site. | |||
| 124 | 123.01 | 33KV bay Four Pole structure in 33/11 KV Substation (centre to centre - 4.5m) | 1 | Set | |
| 125 | 123.02 | 33KV Strung Bus structure (4.5m centre to centre) | 2 | Set | |
| 126 | 123.03 | 33 KV Power Transformer Gantry structure | 2 | Set | |
| 127 | 123.04 | 33 KV AB switch structure( 1.8m center to centre) | 3 | Set | |
| 128 | 123.05 | 33KV LAS Structure ( 1.8 m center to centre) (under strung bus) | 1 | Set | |
| 129 | 123.06 | 33KV Pie support Structure (1.8m center to centre) | 1 | Set | |
| 130 | 123.07 | 11KV Feeder Bay structures with 6 Bays +2LV( 4m cr to cr) | 1 | Set | |
| 131 | 123.08 | Standard 11 KV Station Transformer Structure | 1 | Set | |
| 132 | 123.09 | Non-specfied structures, Extension, Alterations, and Deductions as per station requirement. | |||
| 133 | 123.1 | Heavy section using RSJ 250 x 125 mm | 0.52 | T | |
| 134 | 123.11 | Heavy section using RSJ 200 x 100 mm | 1.57 | T | |
| 135 | 123.12 | Light section (other than heavy section) | 1.07 | T | |
| 136 | 124 | Supply of various types of steels including Cost of steel, Freight &Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site. | |||
| 137 | 124.01 | 33 KV Breaker Platform | 1 | Set | |
| 138 | 124.02 | 11 KV Breaker Platform | 7 | Set | |
| 139 | 124.03 | Yard Fire Stand frame with top canopy cover | 1 | Set | |
| 140 | 124.04 | Battery Room Fire Stand | 1 | Set | |
| 141 | 124.05 | AC Junction Box fixing frame | 1 | Set | |
| 142 | 125 | Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers(Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer. | |||
| 143 | 125.01 | 33 KV bay Four Pole structure in 33/11 KV Substation (cr to cr 4.5m) | 1 | Set | |
| 144 | 125.02 | 33 KV Strung Bus structure (4.5m cr - cr) | 2 | Set | |
| 145 | 125.03 | 33 KV Power Transformer Gantry structure | 2 | Set | |
| 146 | 125.04 | 33 KV AB switch structure( 1.8m cr - cr) | 3 | Set | |
| 147 | 125.05 | 33 KV LAS Structure ( 1.8 m cr - cr) (under strung bus) | 1 | Set | |
| 148 | 125.06 | 33 KV Pie support Structure ( 1.8 m cr - cr) | 1 | Set | |
| 149 | 125.07 | 11KV Bay structures with (6 bays with 4m cr - cr) 2LV+ 6 Feeder Bays | 1 | Set | |
| 150 | 125.08 | Standard 11 KV Station Transformer Structure | 1 | Set | |
| 151 | 125.09 | 33 KV Breaker Platform | 1 | Set | |
| 152 | 125.1 | 11 KV Breaker Platform | 7 | Set | |
| 153 | 125.11 | Yard Fire Stand frame with top canopy cover | 1 | Set | |
| 154 | 125.12 | Battery Room Fire Stand | 1 | Set | |
| 155 | 125.13 | AC Junction Box fixing frame | 1 | Set | |
| 156 | 125.14 | Non-specfied structures, Extension, Alterations, and Deductions as per station requirement. | |||
| 157 | 125.15 | Heavy section - 250 x 125 RSJ / 200 x 100 RSJ | 2.09 | T | |
| 158 | 125.16 | Light section - All other types of Steels | 1.07 | T | |
| 159 | 126 | Supply of Various types of Steel materials confirming to ISS 2062 –Gr A including GST, Freight, Handling, etc., at site for Earthing with Labour for Fabrication & erection for Earthing including Labour, Machinary and Consumables as Required and as directed by the Field Engineer. | 8.734 | T | |
| 160 | 127 | Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer (Earth to be supplied by the contractor) | 132 | RM | |
| 161 | 128 | Supply and fabrication and erection of eye bolts/grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer. | |||
| 162 | 128.01 | Grout Bolt | 44 | Nos | |
| 163 | 128.02 | Eye Bolt | 51 | Nos | |
| 164 | 129 | Labour for excavation and refilling of Earth /Trench for earthmat, cable, etc., of any size/depth narrow excavation as directed by the field Engineer. | |||
| 165 | 129.01 | Normal clay / hard gravel soil. | 40 | Cum | |
| 166 | 130 | Supply and providing of 450-600 mm dia, 300 mm height, 36 mm thick cement collar for identification of earth electrode location as directed by the field engineer. | 22 | Nos | |
| 167 | 131 | Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. | |||
| 168 | 131.01 | Non-Fragile Materials | |||
| 169 | 131.02 | 33/11KV Isolators | 38 | Nos | |
| 170 | 131.03 | Cables/Conductors including cutting and rewinding | 7.6 | KM | |
| 171 | 131.04 | Busbars | 60 | Nos | |
| 172 | 131.05 | Fire equipments/rubber mats/others | 8 | Nos | |
| 173 | 131.06 | Fragile Materials | |||
| 174 | 131.07 | 33/11 KV Breaker | 16 | Nos | |
| 175 | 131.08 | 33/11 KV CT/PT/LAS/DT/Others | 70 | Nos | |
| 176 | 131.09 | 33/22/11 KV Insulators | 620 | Nos | |
| 177 | 131.1 | AC/DC/C&R Panels of Non grid type, Single feeder Control/Relay Panels of Grid type. | 16 | Nos | |
| 178 | 131.11 | 110V DC Battery sets. | 4 | Set | |
| 179 | 131.12 | Battery Charger-Simple type | 6 | Nos | |
| 180 | 132 | Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor using Board's crane for one operation. | |||
| 181 | 132.01 | Fragile Materials | |||
| 182 | 132.02 | 33/11 KV Breakers | 16 | Nos | |
| 183 | 133 | Labour for the Erection of Strung bus and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer. | |||
| 184 | 133.01 | upto 33 KV Single Conductor Strung Bus/phase | 15 | Span | |
| 185 | 134 | Labour for the erection of Insulator single pole stack for supports/Underhang including Meggering & other consumables and as directed by the field engineer. | |||
| 186 | 134.01 | Up to 33 KV | 15 | Nos | |
| 187 | 135 | Labour for the erection of Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. | |||
| 188 | 135.01 | 50 mm (1 length) | 30 | Nos | |
| 189 | 136 | Labour for the Erection of Jumper/Droppers using Moose/Zebra/panther Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer. | 54 | Nos | |
| 190 | 137 | Supply of Aluminium Power Connectors/ Clamps/ Fittings with SS Bolts and Nuts, including GST, frieght etc., confirming to IS as per the drawing and specification. | |||
| 191 | 137.01 | 4-Bolt Tension fitting | 36 | Nos | |
| 192 | 137.02 | Switch End Clamp for Zebra | 51 | Nos | |
| 193 | 137.03 | Switch End Clamp for Mink | 18 | Nos | |
| 194 | 137.04 | Switch End Clamp for 50mm Bus | 30 | Nos | |
| 195 | 137.05 | Seating Block for 50mm Busbar | 12 | Nos | |
| 196 | 137.06 | T clamp for Zebra to Zebra | 33 | Nos | |
| 197 | 137.07 | T Clamp for 50m Bus to Zebra | 30 | Nos | |
| 198 | 137.08 | Free End Clamp 50mm | 30 | Nos | |
| 199 | 137.09 | Reducer Clamp for 50mm Bus to Zebra | 3 | Nos | |
| 200 | 137.1 | PG Clamp for Zebra | 18 | Nos | |
| 201 | 137.11 | 50mm Corona Bell | 27 | Nos | |
| 202 | 138 | Labour for the Erection of 33/22/11 KV Breakers complete set using Crane with proper levelling, proving holes cutting, jointing, wherever required, Erection of 3 Nos CTs without crane, Providing conductor jumpers from Isolator/Bus to Breaker, Breaker to CT's, CTs to Isolators, Supply & Erection of Earthing steels Four Risers Breaker Structure from Earthmat/electrode using 50x08 MSF, Providing Flexible Copper Earthing loops to the Breaker earthing points, Supply & painting of first primer coat of redoxide and two coats of Bus green Enamel paint on to the Earth risers inculing cost of reputed make paints, consumable, GST, frieght, etc, and as directed by the field engineer. | |||
| 203 | 138.01 | 33 KV Breaker using Crane arranged by contractor | 1 | Set | |
| 204 | 138.02 | 33 KV Breaker using Board's Crane | 1 | Set | |
| 205 | 138.03 | 11 KV Breaker using Crane arranged by the Contractor | 5 | Set | |
| 206 | 138.04 | 11 KV Breaker using Board's Crane | 2 | Set | |
| 207 | 139 | Labour for the erection of Potential Transformers, Supply and Erection of Earthing steels using 50x8 MSF & Flexible Copper loops to equipment & Junction box earthing, structure earting, Erection of Junction boxes, Supply and erection of Fixing steels, Painting of Primer Redoxide, Two coats of Bus Green enamel Paint on Earthing steels with supply of reputed make paints, including GST, frieght & all consumables as directed by the field engineer. | |||
| 208 | 139.01 | 33 KV Bus PT (3 units) | 1 | Set | |
| 209 | 139.02 | 11 KV Bus PT (single unit) | 1 | Set | |
| 210 | 140 | Labour for erection of 22/11 KV station transformers with/without crane and as directed by the field engineer. | 1 | No | |
| 211 | 141 | Labour for erection of HG fuse complete set 11 KV | 1 | Set | |
| 212 | 142 | Labour for the Erection of Isolators to correct alignment , including the cost of Consumables and lubricants, Meggaring, replacement of insulators if necessary etc, Supply and erection of Earthing steels to Isolator Bases, Insulators, ABS Booms, Poles, Earth Blades, operating Mechanism earthing etc., using 50x8 MSF, Supply and Erection of 25 x 3mm² Flexible Copper to the centre Rotating Insulators, Mechanism Box etc, Supply and Applying of one coat of Primer Redoxide paint and Two coats of Bus Green Enamel Paint on earthing material including GST, Freight, consumables etc.,.as directed by the field engineer. | |||
| 213 | 142.01 | 33 KV Isolator | 5 | Set | |
| 214 | 142.02 | 11 KV Isolator | 14 | Set | |
| 215 | 143 | Labour for erection of LAS station type with surge monitor/ accessories etc., (3 Nos single pole stack) including Supply and erection of Earthing steels, (connecting to earth electrode & mat) Supply and Painting of Primer Paints and Two coats of Enamel Paints of reputed make, including GST, frieght, consumables etc., as directed by the filed Engineer. | |||
| 216 | 143.01 | 33/11 KV LAS | 3 | Set | |
| 217 | 144 | Labour for the Erection of Control Panels includings consumables as directed by the field engineer. | |||
| 218 | 144.01 | Simplex type/AC/DC/C&R Panel of Non-Grid type, Battery Chargers. | 10 | Nos | |
| 219 | 145 | Labour for Erection of Battery set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the Battery cells and fixing of connecting plates. | |||
| 220 | 145.01 | 110 V DC , 120 AH Battery. | 1 | Set | |
| 221 | 146 | Labour,Consumables for the Initial filling and First Charging of the Battery to the required AH input and thereafter atleast 3 cycles of Charge / Discharge of the Battery set till the battery is charged to its full Capacity as directed by the field Engineer. | |||
| 222 | 146.01 | 110 V DC , 120AH Battery. | 1 | Set | |
| 223 | 147 | Supply and Erection of 5 m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs &2.5inch dia for 2mtrs) including single/double fitting (Straight or 'V' type) fixing arrangements, 1 inch dia B class pipe arms, yard light box fixing flat and one coat of redoxide and one coat of aluminium paint. | 11 | Nos | |
| 224 | 148 | Supply and Erection of reputed make street light fitting with 1x(70-75)W, 240V CGL/PHILIPS make LED Light. | 24 | Nos | |
| 225 | 149 | Supply of Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply ,Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, GST, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements). | 11 | Nos | |
| 226 | 150 | Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply, Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, GST, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements) | 11 | Nos | |
| 227 | 151 | Fabrication,supply and fixing A.C.distribution box of size 750x750x250 mm out of 14SWG (2mm)M.S.Sheet including primer paint coat, Supply, Fabrication and Erection of Fixing Flat using 65x10MSF, supply & fixing of 3 nos 200A and 6 nos 100A Porcelain fuse units, Supply and Painting of Two coat of Enamel Paint including cost of materials, consumables, GST, fright, etc., as directed by the field engineer.The box shall be vermin proof shall have sturdy hinges,provision for mounting MCB and MCCB,detachable gland plate and locking arrangements. | 1 | No | |
| 228 | 152 | Supply and Labour for the Second Finish Coat of Aluminium paint on standard Steel Structures including cost of Paints of reputed make, Consumables etc., as directed by the field Engineer. | |||
| 229 | 152.01 | 33 KV Four Pole structure (Incomer) | 1 | Set | |
| 230 | 152.02 | 33 KV Strung Bus structure | 2 | Set | |
| 231 | 152.03 | 33 KV Power Transformer Gantry structure | 2 | Set | |
| 232 | 152.04 | 33 KV AB switch structure (1.8 m centre) | 3 | Set | |
| 233 | 152.05 | 33 KV Pie support Structure (1.8 m centre) | 1 | Set | |
| 234 | 152.06 | 33 KV LAS Structure under strung bus (1.8 m centre) | 1 | Set | |
| 235 | 152.07 | 11 KV Feeder Bay structures with 6 Bays + 2 LV | 1 | Set | |
| 236 | 152.08 | 11 KV Station Transformer structure | 1 | Set | |
| 237 | 153 | Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field engineer. | |||
| 238 | 153.01 | 33/22 KV Breaker Platform | 1 | Set | |
| 239 | 153.02 | 11 KV Breaker Platform | 7 | Set | |
| 240 | 153.03 | Yard Fire Stand frame with top canopy cover | 1 | Set | |
| 241 | 153.04 | Battery Room Fire Stand | 1 | Set | |
| 242 | 153.05 | AC Junction Box fixing frame | 1 | Set | |
| 243 | 153.06 | 250 x 125 RSJ Pole Bottom (Height 0.45 to 0.50m) | 8 | Nos | |
| 244 | 153.07 | 200 x 100 RSJ Pole Bottom | 37 | Nos | |
| 245 | 153.08 | Yard Light Pole Bottom | 24 | Nos | |
| 246 | 154 | Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer. | 40 | Sqm | |
| 247 | 155 | Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer. | 15 | sqm | |
| 248 | 156 | Labour for erection of cable in duct/trench/ clamping on structures - neat laying in the ducts with identification Aluminium tags in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. | |||
| 249 | 156.01 | Up to 8 Core | 2.5 | KM | |
| 250 | 156.02 | Above 8 Core | 1 | KM | |
| 251 | 157 | Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer. | |||
| 252 | 157.01 | 16/19 mm | 125 | E | |
| 253 | 157.02 | 22/25 mm | 70 | E | |
| 254 | 157.03 | 28/32 mm | 16 | E | |
| 255 | 158 | Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000). | 1 | Unit | |
| 256 | 159 | Supply and erection of Vinyl Sticker cutting/ Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by field Engineer. | 25 | Sq.m | |
| 257 | 160 | Supply and erection of \"B\" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer. | |||
| 258 | 160.01 | 40 mm Dia | 3 | m | |
| 259 | 160.02 | 50 mm Dia | 3 | m | |
| 260 | 161 | Supply and provision of 12/25x3mm flexible braided copper / copper flats as required and as directed by the field engineer. | 7 | Kg | |
| 261 | 162 | Supply & Crimping of Copper Lugs of Suitable sizes as required and as directed by the field engineer. | 60 | Nos | |
| 262 | 163 | Supply and fixing Fuse unit of reputed make with ISI as directed by the field engineer including drilling & fixing. | |||
| 263 | 163.01 | HRC Backlite Fuse units | |||
| 264 | 163.02 | 32 AMPS | 8 | Nos | |
| 265 | 163.03 | 63 AMPS | 4 | Nos | |
| 266 | 164 | Supply and fixing of HRC fuse of reputed make as directed by the field engineer. | |||
| 267 | 164.01 | 2/5/10 AMPS | 10 | Nos | |
| 268 | 164.02 | 32 AMPS | 4 | Nos | |
| 269 | 164.03 | 63 AMPS | 4 | Nos | |
| 270 | 165 | Supply and fixing of Hylem board 8/10 mm thick wherever required as directed by the field engineer. | 0.3 | Sq.m | |
| 271 | 166 | Supply and fixing of MCB of Havells/ Schneider/ MDS/ Reputed make with ISI mark wherever required as directed by the field engineer. | |||
| 272 | 166.01 | 32 AMPS - 3 phase, 4 pole | 1 | No | |
| 273 | 166.02 | 16 AMPS - single phase, single pole | 7 | Nos | |
| 274 | 167 | Supply and fixing of AC single/ 3 phase 4 pole 415V ISI mark changeover switch of reputed make iron glad metal switch as required and directed by the field engineer. | |||
| 275 | 167.01 | 32 AMPS (single phase - DPDT) | 1 | No | |
| 276 | 168 | Supply and fixing of Terminal blocks as directed by the field engineer. | |||
| 277 | 168.01 | Regular type (Non-disconnecting) | 10 | Nos | |
| 278 | 168.02 | Disconnecting type (Link type) | 108 | Nos | |
| 279 | 169 | Supply and provision of M8,M10,M12 and M16 (full /Half thread)G.I.bolt and nuts of various sizes including plate/spring washers as required and as directed by the field engineer. | 35 | KG | |
| 280 | 170 | Supply & fixing of LC/Key board out of 75x 25 mm Alu. frame embedded with 12 mm pre-laminated wood particle board using screw on rear side, 2 Nos plain glass sliding shutter of 5 mm thick fixed with metal roller on Alu.channel with locking arrangements, glass piece handle shutters, wall clamp as directed by the field Engineer including cost of all materials & all consumables. | 2 | Nos | |
| 281 | 171 | Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches and for any other purpose including the cost of ring and key token as directed by the field engineer. | 19 | Nos | |
| 282 | 172 | Supply & providing of Mechanical foam type fire extinguisher with all accessories conforming to IS. | |||
| 283 | 172.01 | 9 litre portable | 2 | Nos | |
| 284 | 173 | Supply & providing of DCP (Dry Chemical Powder) type fire extinguisher with all accessories conforming to IS | |||
| 285 | 173.01 | 25 kg Trolly mounted | 1 | Nos | |
| 286 | 173.02 | 10 kg Portable | 2 | Nos | |
| 287 | 173.03 | 5/6 kg Portable | 3 | Nos | |
| 288 | 174 | Supply and fabrication of sand drums,(size of 580mm dia & 420 mm height)with conical cover made of tin sheet to be provided with handle including the cost of barrel and other consumables as directed by the field engineer inlcuding the cost of sand. | 4 | Nos | |
| 289 | 175 | Supply & providing of fire buckets 10 Ltrs capacity | 12 | Nos | |
| 290 | 176 | Provision for the security arrangement in substations under erection from date of supply of 1st Board material to the contractor, till the date of commissioing. | 240 | Day |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
